Graphdiyne(GDY)and its derivatives have been considered ideal supporting materials for nanoscale active particles because of their unique atomic and electronic structure.An efficient bi-metal Cu-Pd catalyst was added ...Graphdiyne(GDY)and its derivatives have been considered ideal supporting materials for nanoscale active particles because of their unique atomic and electronic structure.An efficient bi-metal Cu-Pd catalyst was added to produce the uniform deposition of Pd nano-clusters with an average size of~0.95 nm on hydrogen-substituted GDY(HGDY)nanosheets.With the assistance of NaBH4,the resulting Pd/H-GDY was very effective in the degradation of 4-nitrophenol(4-NP),whose conversion was sharply increased to 97.21%in 100 s with a rate constant per unit mass(k`)of 8.97×10^(5)min−1 g^(−1).Additionally,dyes such as methyl orange(MO)and Congo red(CR)were completely degraded within 180 and 90 s,respectively.The Pd/H-GDY maintained this activity after 5 reduction cycles.These results highlight the promising performance of Pd/H-GDY in catalyzing the degradation of various pollutants,which is attributed to the combined effect of the largeπ-conjugated structure of the H-GDY nanosheets and the evenly distributed Pd nanoclusters.展开更多
Owing to the low p-type doping efficiency in the hole injection layers(HILs)of GaN-based ultra-violet(UV)vertical-cavity surface-emitting laser(VCSEL),effective hole injection in multi-quantum wells(MQW)is not achieve...Owing to the low p-type doping efficiency in the hole injection layers(HILs)of GaN-based ultra-violet(UV)vertical-cavity surface-emitting laser(VCSEL),effective hole injection in multi-quantum wells(MQW)is not achieved,significantly limiting the photoelectric performance of UV VCSELs.We developed a slope-shaped HIL and an EBL structure in AlGaN-based UV VCSELs.In this study,by improving hole in-jection efficiency,the hole concentration in the HIL is increased,and the hole barrier at the electron barrier layer(EBL)/HIL interface is decreased.This minimises the hindering effect of hole injection.A mathematic-al model of this structure was established using a commercial software,photonic integrated circuit simulator in three-dimension(PICS3D).We conducted simulations and theoretical analyses of the band structure and carrier concentration.Introducing polarisation doping through the Al composition gradient in the HIL en-hanced the hole concentration,thereby improving the hole injection efficiency.Furthermore,modifying the EBL eliminated the abrupt potential barrier for holes at the HIL/EBL interface,smoothing the valence band.This improved the stimulated radiative recombination rate in the MQW,increasing the laser power.There-fore,the sloped p-type layer can enhance the optoelectronic performance of UV VCSELs.展开更多
There is nonradiative recombination in waveguide region owing to severe carrier leakage,which in turn reduces output power and wall-plug efficiency.In this paper,we designed a novel epitaxial structure,which suppresse...There is nonradiative recombination in waveguide region owing to severe carrier leakage,which in turn reduces output power and wall-plug efficiency.In this paper,we designed a novel epitaxial structure,which suppresses carrier leakage by inserting n-Ga_(0.55)In_(0.45)P and p-GaAs_(0.6)P_(0.4) between barriers and waveguide layers,respectively,to modulate the energy band structure and to increase the height of barrier.The results show that the leakage current density reduces by 87.71%,compared to traditional structure.The nonradiative recombination current density of novel structure reduces to 37.411 A/cm^(2),and the output power reaches 12.80 W with wall-plug efficiency of 78.24%at an injection current density 5 A/cm^(2) at room temperature.In addition,the temperature drift coefficient of center wavelength is 0.206 nm/℃at the temperature range from 5℃to 65℃,and the slope of fitted straight line of threshold current with temperature variation is 0.00113.The novel epitaxial structure provides a theoretical basis for achieving high-power laser diode.展开更多
To weaken the basal texture and in-plane anisotropy of magnesium alloy, non-basal slips are pre-enhanced by pre-rolling with a single pass larger strain reduction at elevated temperatures. Then Mg alloy sheets with th...To weaken the basal texture and in-plane anisotropy of magnesium alloy, non-basal slips are pre-enhanced by pre-rolling with a single pass larger strain reduction at elevated temperatures. Then Mg alloy sheets with the thickness of 1 mm are achieved after five passes rolling at 300 ℃. A double peak and disperse basal texture is generated after pre- rolling at higher temperatures when the non-basal slips are more active. So, the texture intensity of pre-rolled samples is reduced. Moreover, the distribution condition of in-grain misorientation axes (a method to analyze the activation of slips) shows that the pyramidal slip is quite active during deformation. After annealing on final rolled sheets, the texture distributions are changed and the intensity of texture reduces obviously due to static recrystallization. In particular, the r-value and in-plane anisotropy of pre-rolled samples are obviously lower than those of sample without pre-rolling.展开更多
The electronic structure,magnetic,and optical properties of two-dimensional(2D)GaSe doped with rare earth elements X(X=Sc,Y,La,Ce,Eu)were calculated using the first-principles plane wave method based on den-sity funct...The electronic structure,magnetic,and optical properties of two-dimensional(2D)GaSe doped with rare earth elements X(X=Sc,Y,La,Ce,Eu)were calculated using the first-principles plane wave method based on den-sity functional theory.The results show that intrinsic 2D GaSe is a p-type nonmagnetic semiconductor with an indi-rect bandgap of 2.6611 eV.The spin-up and spin-down channels of Sc-,Y-,and La-doped 2D GaSe are symmetric,they are non-magnetic semiconductors.The magnetic moments of Ce-and Eu-doped 2D GaSe are 0.908μ_(B)and 7.163μ_(B),which are magnetic semiconductors.Impurity energy levels appear in both spin-up and spin-down chan-nels of Eu-doped 2D GaSe,which enhances the probability of electron transition.Compared with intrinsic 2D GaSe,the static dielectric constant of the doped 2D GaSe increases,and the polarization ability is strengthened.The ab-sorption spectrum of the doped 2D GaSe shifts in the low-energy direction,and the red-shift phenomenon occurs,which extends the absorption spectral range.The optical reflection coefficient of the doped 2D GaSe is improved in the low energy region,and the improvement of Eu-doped 2D GaSe is the most obvious.展开更多
Light-emitting diodes (LEDs), which convert electricity to light, are widely used in modern society,for example, in lighting, flat-panel displays, medical devices and many other situations. Ge- nerally, the efficiency...Light-emitting diodes (LEDs), which convert electricity to light, are widely used in modern society,for example, in lighting, flat-panel displays, medical devices and many other situations. Ge- nerally, the efficiency of LEDs is limited by nonradiative recombination (whereby charge carriers recombine without releasing photons) and light trapping [1]. In planar LEDs, such as organic LEDs, around 70% to 80% of the light generated from the emitters is trapped in the device [2], leaving considerable opportunity for improvements in efficiency. Many methods, including the use of diffraction gratings, low-index grids and buckling patterns, have been used to extract the light trapped in LEDs [3]. However, these methods usually involve complicated fabrication processes and can distort the light-output spectrum and directionality [3].展开更多
Due to their high hardness and high strength,VC reinforced hard materials such as high vanadium high-speed steel(HVHSS)are not suitable for machining to obtain complex shape with low cost.Therefore,3D gel printing(3DG...Due to their high hardness and high strength,VC reinforced hard materials such as high vanadium high-speed steel(HVHSS)are not suitable for machining to obtain complex shape with low cost.Therefore,3D gel printing(3DGP)was employed to print HVHSS parts,using highly loaded slurry with 60%solid content as printing slurry.After printing parameters optimization,the printing sample had good surface quality,and obvious printing lines were observed.The extruded filament was in-situ cured,thus enough to maintain the designed shape.Uniform sintering shrinkage with a shrinkage rate of about 15%was obtained in the as-sintered sample with relative density of 99%.The surface roughness decreased from 6.5μm to 3.8μm.Fine carbides(<1μm)and dense microstructure were achieved.Besides,the as-sintered sample had comprehensive performance of HRC60 in hardness,3000 MPa in bend strength,and 20−26 J in impact energy.This study proposed one promising method to directly manufacture complex-shaped hard materials without subsequent machining.展开更多
Backfill mining is one of the most important technical means for controlling strata movement and reducing surface subsidence and environmental damage during exploitation of underground coal resources. Ensuring the sta...Backfill mining is one of the most important technical means for controlling strata movement and reducing surface subsidence and environmental damage during exploitation of underground coal resources. Ensuring the stability of the backfill bodies is the primary prerequisite for maintaining the safety of the backfilling working face, and the loading characteristics of backfill are closely related to the deformation and subsidence of the roof. Elastic thin plate model was used to explore the non-uniform subsidence law of the roof, and then the non-uniform distribution characteristics of backfill bodies’ load were revealed. Through a self-developed non-uniform loading device combined with acoustic emission (AE) and digital image correlation (DIC) monitoring technology, the synergistic dynamic evolution law of the bearing capacity, apparent crack, and internal fracture of cemented coal gangue backfills (CCGBs) under loads with different degrees of non-uniformity was deeply explored. The results showed that: 1) The uniaxial compressive strength (UCS) of CCGB increased and then decreased with an increase in the degree of non-uniformity of load (DNL). About 40% of DNL was the inflection point of DNL-UCS curve and when DNL exceeded 40%, the strength decreased in a cliff-like manner;2) A positive correlation was observed between the AE ringing count and UCS during the loading process of the specimen, which was manifested by a higher AE ringing count of the high-strength specimen. 3) Shear cracks gradually increased and failure mode of specimens gradually changed from “X” type dominated by tension cracks to inverted “Y” type dominated by shear cracks with an increase in DNL, and the crack opening displacement at the peak stress decreased and then increased. The crack opening displacement at 40% of the DNL was the smallest. This was consistent with the judgment of crack size based on the AE b-value, i. e., it showed the typical characteristics of “small b-value-large crack and large b-value-small crack”. The research results are of significance for preventing the instability and failure of backfill.展开更多
The use of three-dimensional(3D)electrodes in water treatment is competitive because of their high catalytic efficiency,low energy consumption and promising development.The use of particle electrodes is a key research...The use of three-dimensional(3D)electrodes in water treatment is competitive because of their high catalytic efficiency,low energy consumption and promising development.The use of particle electrodes is a key research focus in this technology.They are usually in the form of particles that fill the space between the cathode and anode,and the selection of materials used is important.Carbon-based materials are widely used because of their large specific surface area,good adsorption performance,high chemical stability and low cost.The principles of 3D electrode technology are introduced and recent research on its use for degrading organic pollutants using carbon-based particle electrodes is summarized.The classification of particle electrodes is introduced and the challenges for the future development of carbon-based particle electrodes in wastewater treatment are discussed.展开更多
Pillar is closely related to the stability and reliability of underground spaces in closed/abandoned mines.The present research introduced a new technique to strengthen square cement mortar columns via fiber-reinforce...Pillar is closely related to the stability and reliability of underground spaces in closed/abandoned mines.The present research introduced a new technique to strengthen square cement mortar columns via fiber-reinforced polymer(FRP)strips to verify the strengthening effect of FRP on pillars.Compared to a fully wrapped FRP jacket,the advantages of FRP strip are cost-effective and easy-to-construct.A series of compression tests as well as theoretical analysis were carried out to explore the mechanical behavior of square cement mortar specimens partially strengthened with FRP strips.The results verified the effectiveness of FRP strips in enhancing the stress and strain of cement mortar.Different from unconfined cement mortar specimens,these FRP-strengthened cement mortar specimens are featured with the double-peaked behaviors,mainly attributed to the stress state transformation from a one-dimensional to a three-dimensional stress state.It also indicated that the enhancement of stress increased with the FRP strip width.Moreover,the brittle-ductile transition ductile failure characteristics were also observed in FRP-confined cement mortar specimens.The ultimate ductility of the cement mortar specimen decreases gradually with the growth of the FRP strip width.The main contribution of this research is to enrich the strengthening techniques for residual pillars.展开更多
Perovskite materials have attracted much attention in recent years because of their excellent photovoltaic properties for solar cell,including high optical absorption,small exciton binding energy,low trap densities,an...Perovskite materials have attracted much attention in recent years because of their excellent photovoltaic properties for solar cell,including high optical absorption,small exciton binding energy,low trap densities,and long-range ambipolar carrier diffusion lengths[1-2].However,perovskite materials are easily degraded under the conditions of light,electric field,heating,water and oxygen,which seriously hinder the further commercialization of perovskite solar cells(PSCs)[3-4].Recently,two-dimensional Ruddlesden-Popper phase(2DRP)perovskites are known to exhibit improved photostability and environmental stability compared with their three-dimensional(3D)counterparts[5-7].Ho-wever,fundamental questions remain over the interaction between the bulky alkylammoniums and the 2DRP perovskite framework[8].展开更多
A series of shape-persistent polyphenylene dendritic C_(60)derivatives as the electron transport materials were designed and synthesized via a catalyst-free Diels-Alder[4+2]cycloaddition reaction.These increasing hype...A series of shape-persistent polyphenylene dendritic C_(60)derivatives as the electron transport materials were designed and synthesized via a catalyst-free Diels-Alder[4+2]cycloaddition reaction.These increasing hyperbranched scaffolds could effectively enhance the solubility;notably,both first and second generation dendrimers,C_(60)-G1 and C_(60)-G2,demonstrated more than 5 times higher solubilities than pristine C_(60).Furthermore,both simulated and experimental data proved their promising solution-processabilities as electron-transporting layers(ETLs)for perovskite solar cells.As a result,the planar p-i-n structural perovskite solar cell could achieve a maximum power conversion efficiency of 14.7%with C_(60)-G2.展开更多
Carbon with its high electrical conductivity,excellent chemical stability,and structure ability is the most promising an-ode material for sodium and potassium ion batteries.We developed a defect-rich porous carbon fra...Carbon with its high electrical conductivity,excellent chemical stability,and structure ability is the most promising an-ode material for sodium and potassium ion batteries.We developed a defect-rich porous carbon framework(DRPCF)built with N/O-co-doped mesoporous nanosheets and containing many defects using porous g-C_(3)N_(4)(PCN)and dopamine(DA)as raw materials.We prepared samples with PCN/DA mass ratios of 1/1,2/1 and 3/1 and found that the one with a mass ratio of 2/1 and a carbonization temperature of 700℃ in an Ar atmosphere(DRPCF-2/1-700),had a large specific surface area with an enormous pore volume and a large number of N/O heteroatom active defect sites.Because of this,it had the best pseudocapacitive sodium and potassium ion stor-age performance.A half battery of Na//DRPCF-2/1-700 maintained a capacity of 328.2 mAh g^(-1) after being cycled at 1 A g^(-1) for 900 cycles,and a half battery of K//DRPC-2/1-700 maintained a capacity of 321.5 mAh g^(-1) after being cycled at 1 A g^(-1) for 1200 cycles.The rate capability and cycling stability achieved by DRPCF-2/1-700 outperforms most reported carbon materials.Finally,ex-situ Raman spectroscopy analysis result confirms that the filling and removing of K^(+)and Na^(+)from the electrochemically active defects are responsible for the high capacity,superior rate and cycling performance of the DRPCF-2/1-700 sample.展开更多
Submicron scale temperature sensors are crucial for a range of applications,particularly in micro and na-noscale environments.One promising solution involves the use of active whispering gallery mode(WGM)microresonato...Submicron scale temperature sensors are crucial for a range of applications,particularly in micro and na-noscale environments.One promising solution involves the use of active whispering gallery mode(WGM)microresonators.These resonators can be remotely excited and read out using free-space structures,simplifying the process of sensing.In this study,we present a submicron-scale temperature sensor with a remarkable sensitivity up to 185 pm/℃based on a trian-gular MAPbI3 nanoplatelet(NPL)laser.Notably,as temperature changes,the peak wavelength of the laser line shifts lin-early.This unique characteristic allows for precise temperature sensing by tracking the peak wavelength of the NPL laser.The optical modes are confined within the perovskite NPL,which measures just 85 nm in height,due to total internal reflec-tion.Our NPL laser boasts several key features,including a high Q of~2610 and a low laser threshold of about 19.8μJ·cm^(−2).The combination of exceptional sensitivity and ultra-small size makes our WGM device an ideal candidate for integration into systems that demand compact temperature sensors.This advancement paves the way for significant prog-ress in the development of ultrasmall temperature sensors,opening new possibilities across various fields.展开更多
Research on two-dimensional(2D) materials has been explosively increasing in last seventeen years in varying subjects including condensed matter physics, electronic engineering, materials science, and chemistry since ...Research on two-dimensional(2D) materials has been explosively increasing in last seventeen years in varying subjects including condensed matter physics, electronic engineering, materials science, and chemistry since the mechanical exfoliation of graphene in 2004. Starting from graphene, 2D materials now have become a big family with numerous members and diverse categories. The unique structural features and physicochemical properties of 2D materials make them one class of the most appealing candidates for a wide range of potential applications. In particular, we have seen some major breakthroughs made in the field of 2D materials in last five years not only in developing novel synthetic methods and exploring new structures/properties but also in identifying innovative applications and pushing forward commercialisation. In this review, we provide a critical summary on the recent progress made in the field of 2D materials with a particular focus on last five years. After a brief backgroundintroduction, we first discuss the major synthetic methods for 2D materials, including the mechanical exfoliation, liquid exfoliation, vapor phase deposition, and wet-chemical synthesis as well as phase engineering of 2D materials belonging to the field of phase engineering of nanomaterials(PEN). We then introduce the superconducting/optical/magnetic properties and chirality of 2D materials along with newly emerging magic angle 2D superlattices. Following that, the promising applications of 2D materials in electronics, optoelectronics, catalysis, energy storage, solar cells, biomedicine, sensors, environments, etc. are described sequentially. Thereafter, we present the theoretic calculations and simulations of 2D materials. Finally, after concluding the current progress, we provide some personal discussions on the existing challenges and future outlooks in this rapidly developing field.展开更多
In recent years, the increasing demand of various fields of radiation detection materials has led to intensive researches in scintillation materials 1-2]. The scintillators can absorb high-energy X-ray photons and the...In recent years, the increasing demand of various fields of radiation detection materials has led to intensive researches in scintillation materials 1-2]. The scintillators can absorb high-energy X-ray photons and then convert them into low-energy visible photons, which are widely applied in radiation monitoring, security detection, X-ray astronomy and medical radiology 3"l].展开更多
基金National Natural Science Foundation of China(52072336,51902285)Zhejiang Provincial Natural Science Foundation(LR23E020002)+1 种基金Fundamental Research Funds for the Central Universities(226-2023-00064,226-2024-00146)Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering(2022SZ-FR001)。
文摘Graphdiyne(GDY)and its derivatives have been considered ideal supporting materials for nanoscale active particles because of their unique atomic and electronic structure.An efficient bi-metal Cu-Pd catalyst was added to produce the uniform deposition of Pd nano-clusters with an average size of~0.95 nm on hydrogen-substituted GDY(HGDY)nanosheets.With the assistance of NaBH4,the resulting Pd/H-GDY was very effective in the degradation of 4-nitrophenol(4-NP),whose conversion was sharply increased to 97.21%in 100 s with a rate constant per unit mass(k`)of 8.97×10^(5)min−1 g^(−1).Additionally,dyes such as methyl orange(MO)and Congo red(CR)were completely degraded within 180 and 90 s,respectively.The Pd/H-GDY maintained this activity after 5 reduction cycles.These results highlight the promising performance of Pd/H-GDY in catalyzing the degradation of various pollutants,which is attributed to the combined effect of the largeπ-conjugated structure of the H-GDY nanosheets and the evenly distributed Pd nanoclusters.
文摘Owing to the low p-type doping efficiency in the hole injection layers(HILs)of GaN-based ultra-violet(UV)vertical-cavity surface-emitting laser(VCSEL),effective hole injection in multi-quantum wells(MQW)is not achieved,significantly limiting the photoelectric performance of UV VCSELs.We developed a slope-shaped HIL and an EBL structure in AlGaN-based UV VCSELs.In this study,by improving hole in-jection efficiency,the hole concentration in the HIL is increased,and the hole barrier at the electron barrier layer(EBL)/HIL interface is decreased.This minimises the hindering effect of hole injection.A mathematic-al model of this structure was established using a commercial software,photonic integrated circuit simulator in three-dimension(PICS3D).We conducted simulations and theoretical analyses of the band structure and carrier concentration.Introducing polarisation doping through the Al composition gradient in the HIL en-hanced the hole concentration,thereby improving the hole injection efficiency.Furthermore,modifying the EBL eliminated the abrupt potential barrier for holes at the HIL/EBL interface,smoothing the valence band.This improved the stimulated radiative recombination rate in the MQW,increasing the laser power.There-fore,the sloped p-type layer can enhance the optoelectronic performance of UV VCSELs.
文摘There is nonradiative recombination in waveguide region owing to severe carrier leakage,which in turn reduces output power and wall-plug efficiency.In this paper,we designed a novel epitaxial structure,which suppresses carrier leakage by inserting n-Ga_(0.55)In_(0.45)P and p-GaAs_(0.6)P_(0.4) between barriers and waveguide layers,respectively,to modulate the energy band structure and to increase the height of barrier.The results show that the leakage current density reduces by 87.71%,compared to traditional structure.The nonradiative recombination current density of novel structure reduces to 37.411 A/cm^(2),and the output power reaches 12.80 W with wall-plug efficiency of 78.24%at an injection current density 5 A/cm^(2) at room temperature.In addition,the temperature drift coefficient of center wavelength is 0.206 nm/℃at the temperature range from 5℃to 65℃,and the slope of fitted straight line of threshold current with temperature variation is 0.00113.The novel epitaxial structure provides a theoretical basis for achieving high-power laser diode.
基金Project(52374395) supported by the National Natural Science Foundations of ChinaProjects(20210302123135,20210302123163) supported by the Natural Science Foundation of Shanxi Province,China+2 种基金Projects(YDZJSX20231B003,YDZJSX2021A010) supported by the Central Government Guided Local Science and Technology Development Projects,ChinaProject(2022M710541) supported by the China Postdoctoral Science FoundationProjects(202104021301022,202204021301009) supported by the Scientific and Technological Achievements Transformation Guidance Special Project of Shanxi Province,China。
文摘To weaken the basal texture and in-plane anisotropy of magnesium alloy, non-basal slips are pre-enhanced by pre-rolling with a single pass larger strain reduction at elevated temperatures. Then Mg alloy sheets with the thickness of 1 mm are achieved after five passes rolling at 300 ℃. A double peak and disperse basal texture is generated after pre- rolling at higher temperatures when the non-basal slips are more active. So, the texture intensity of pre-rolled samples is reduced. Moreover, the distribution condition of in-grain misorientation axes (a method to analyze the activation of slips) shows that the pyramidal slip is quite active during deformation. After annealing on final rolled sheets, the texture distributions are changed and the intensity of texture reduces obviously due to static recrystallization. In particular, the r-value and in-plane anisotropy of pre-rolled samples are obviously lower than those of sample without pre-rolling.
文摘The electronic structure,magnetic,and optical properties of two-dimensional(2D)GaSe doped with rare earth elements X(X=Sc,Y,La,Ce,Eu)were calculated using the first-principles plane wave method based on den-sity functional theory.The results show that intrinsic 2D GaSe is a p-type nonmagnetic semiconductor with an indi-rect bandgap of 2.6611 eV.The spin-up and spin-down channels of Sc-,Y-,and La-doped 2D GaSe are symmetric,they are non-magnetic semiconductors.The magnetic moments of Ce-and Eu-doped 2D GaSe are 0.908μ_(B)and 7.163μ_(B),which are magnetic semiconductors.Impurity energy levels appear in both spin-up and spin-down chan-nels of Eu-doped 2D GaSe,which enhances the probability of electron transition.Compared with intrinsic 2D GaSe,the static dielectric constant of the doped 2D GaSe increases,and the polarization ability is strengthened.The ab-sorption spectrum of the doped 2D GaSe shifts in the low-energy direction,and the red-shift phenomenon occurs,which extends the absorption spectral range.The optical reflection coefficient of the doped 2D GaSe is improved in the low energy region,and the improvement of Eu-doped 2D GaSe is the most obvious.
文摘Light-emitting diodes (LEDs), which convert electricity to light, are widely used in modern society,for example, in lighting, flat-panel displays, medical devices and many other situations. Ge- nerally, the efficiency of LEDs is limited by nonradiative recombination (whereby charge carriers recombine without releasing photons) and light trapping [1]. In planar LEDs, such as organic LEDs, around 70% to 80% of the light generated from the emitters is trapped in the device [2], leaving considerable opportunity for improvements in efficiency. Many methods, including the use of diffraction gratings, low-index grids and buckling patterns, have been used to extract the light trapped in LEDs [3]. However, these methods usually involve complicated fabrication processes and can distort the light-output spectrum and directionality [3].
基金Projects(2019-ZD08,2020-Z17)supported by the State Key Lab of Advanced Metals and Materials,ChinaProject(52004027)supported by the National Natural Science Foundation of China+2 种基金Project(GDOE[2019]A16)supported by the Guangdong MEPP Fund,ChinaProject(311020012)supported by the Innovation Group Project of Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai),ChinaProject(FRF-GF-20-05A)supported by the Fundamental Research Funds for the Central Universities,China。
文摘Due to their high hardness and high strength,VC reinforced hard materials such as high vanadium high-speed steel(HVHSS)are not suitable for machining to obtain complex shape with low cost.Therefore,3D gel printing(3DGP)was employed to print HVHSS parts,using highly loaded slurry with 60%solid content as printing slurry.After printing parameters optimization,the printing sample had good surface quality,and obvious printing lines were observed.The extruded filament was in-situ cured,thus enough to maintain the designed shape.Uniform sintering shrinkage with a shrinkage rate of about 15%was obtained in the as-sintered sample with relative density of 99%.The surface roughness decreased from 6.5μm to 3.8μm.Fine carbides(<1μm)and dense microstructure were achieved.Besides,the as-sintered sample had comprehensive performance of HRC60 in hardness,3000 MPa in bend strength,and 20−26 J in impact energy.This study proposed one promising method to directly manufacture complex-shaped hard materials without subsequent machining.
基金Project(51925402) supported by the National Natural Science Foundation for Distinguished Young Scholars of ChinaProject(202303021211060) supported by the Natural Science Research General Program for Shanxi Provincial Basic Research Program,China+1 种基金Project(U22A20169) supported by the Joint Fund Project of National Natural Science Foundation of ChinaProjects(2021SX-TD001, 2021SX-TD002) supported by the Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering,China。
文摘Backfill mining is one of the most important technical means for controlling strata movement and reducing surface subsidence and environmental damage during exploitation of underground coal resources. Ensuring the stability of the backfill bodies is the primary prerequisite for maintaining the safety of the backfilling working face, and the loading characteristics of backfill are closely related to the deformation and subsidence of the roof. Elastic thin plate model was used to explore the non-uniform subsidence law of the roof, and then the non-uniform distribution characteristics of backfill bodies’ load were revealed. Through a self-developed non-uniform loading device combined with acoustic emission (AE) and digital image correlation (DIC) monitoring technology, the synergistic dynamic evolution law of the bearing capacity, apparent crack, and internal fracture of cemented coal gangue backfills (CCGBs) under loads with different degrees of non-uniformity was deeply explored. The results showed that: 1) The uniaxial compressive strength (UCS) of CCGB increased and then decreased with an increase in the degree of non-uniformity of load (DNL). About 40% of DNL was the inflection point of DNL-UCS curve and when DNL exceeded 40%, the strength decreased in a cliff-like manner;2) A positive correlation was observed between the AE ringing count and UCS during the loading process of the specimen, which was manifested by a higher AE ringing count of the high-strength specimen. 3) Shear cracks gradually increased and failure mode of specimens gradually changed from “X” type dominated by tension cracks to inverted “Y” type dominated by shear cracks with an increase in DNL, and the crack opening displacement at the peak stress decreased and then increased. The crack opening displacement at 40% of the DNL was the smallest. This was consistent with the judgment of crack size based on the AE b-value, i. e., it showed the typical characteristics of “small b-value-large crack and large b-value-small crack”. The research results are of significance for preventing the instability and failure of backfill.
文摘The use of three-dimensional(3D)electrodes in water treatment is competitive because of their high catalytic efficiency,low energy consumption and promising development.The use of particle electrodes is a key research focus in this technology.They are usually in the form of particles that fill the space between the cathode and anode,and the selection of materials used is important.Carbon-based materials are widely used because of their large specific surface area,good adsorption performance,high chemical stability and low cost.The principles of 3D electrode technology are introduced and recent research on its use for degrading organic pollutants using carbon-based particle electrodes is summarized.The classification of particle electrodes is introduced and the challenges for the future development of carbon-based particle electrodes in wastewater treatment are discussed.
基金Project(51925402)supported by the National Science Fund for Distinguished Young Scholars,ChinaProject supported by the New Cornerstone Science Foundation through the XPLORER PRIZE,China+2 种基金Project(202103021222008)supported by the Outstanding Youth Cultivation Project in Shanxi Province,ChinaProject(2022SX-TD010)supported by Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering,ChinaProject(20201102004)supported by Shanxi Science and Technology Major Project,China。
文摘Pillar is closely related to the stability and reliability of underground spaces in closed/abandoned mines.The present research introduced a new technique to strengthen square cement mortar columns via fiber-reinforced polymer(FRP)strips to verify the strengthening effect of FRP on pillars.Compared to a fully wrapped FRP jacket,the advantages of FRP strip are cost-effective and easy-to-construct.A series of compression tests as well as theoretical analysis were carried out to explore the mechanical behavior of square cement mortar specimens partially strengthened with FRP strips.The results verified the effectiveness of FRP strips in enhancing the stress and strain of cement mortar.Different from unconfined cement mortar specimens,these FRP-strengthened cement mortar specimens are featured with the double-peaked behaviors,mainly attributed to the stress state transformation from a one-dimensional to a three-dimensional stress state.It also indicated that the enhancement of stress increased with the FRP strip width.Moreover,the brittle-ductile transition ductile failure characteristics were also observed in FRP-confined cement mortar specimens.The ultimate ductility of the cement mortar specimen decreases gradually with the growth of the FRP strip width.The main contribution of this research is to enrich the strengthening techniques for residual pillars.
文摘Perovskite materials have attracted much attention in recent years because of their excellent photovoltaic properties for solar cell,including high optical absorption,small exciton binding energy,low trap densities,and long-range ambipolar carrier diffusion lengths[1-2].However,perovskite materials are easily degraded under the conditions of light,electric field,heating,water and oxygen,which seriously hinder the further commercialization of perovskite solar cells(PSCs)[3-4].Recently,two-dimensional Ruddlesden-Popper phase(2DRP)perovskites are known to exhibit improved photostability and environmental stability compared with their three-dimensional(3D)counterparts[5-7].Ho-wever,fundamental questions remain over the interaction between the bulky alkylammoniums and the 2DRP perovskite framework[8].
基金Project(51925402) supported by the National Natural Science Foundation for Distinguished Young Scholars of ChinaProject(51974192) supported by the National Natural Science Foundation,ChinaProject(2022SX-TD007) supported by the Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering Project,China。
基金Projects(2017YFE0131900,2017YFB0404500)supported by National Key Research and Development Program of ChinaProjects(91833306,91733302,62075094)supported by the National Natural Science Foundation of China+1 种基金Project(202003N4004)supported by the Ningbo Natural Science Foundation,ChinaProject(2020GXLH-Z-014)supported by the Joint Research Funds of Department of Science&Technology of Shaanxi Province and Northwestern Polytechnical University,China。
文摘A series of shape-persistent polyphenylene dendritic C_(60)derivatives as the electron transport materials were designed and synthesized via a catalyst-free Diels-Alder[4+2]cycloaddition reaction.These increasing hyperbranched scaffolds could effectively enhance the solubility;notably,both first and second generation dendrimers,C_(60)-G1 and C_(60)-G2,demonstrated more than 5 times higher solubilities than pristine C_(60).Furthermore,both simulated and experimental data proved their promising solution-processabilities as electron-transporting layers(ETLs)for perovskite solar cells.As a result,the planar p-i-n structural perovskite solar cell could achieve a maximum power conversion efficiency of 14.7%with C_(60)-G2.
文摘Carbon with its high electrical conductivity,excellent chemical stability,and structure ability is the most promising an-ode material for sodium and potassium ion batteries.We developed a defect-rich porous carbon framework(DRPCF)built with N/O-co-doped mesoporous nanosheets and containing many defects using porous g-C_(3)N_(4)(PCN)and dopamine(DA)as raw materials.We prepared samples with PCN/DA mass ratios of 1/1,2/1 and 3/1 and found that the one with a mass ratio of 2/1 and a carbonization temperature of 700℃ in an Ar atmosphere(DRPCF-2/1-700),had a large specific surface area with an enormous pore volume and a large number of N/O heteroatom active defect sites.Because of this,it had the best pseudocapacitive sodium and potassium ion stor-age performance.A half battery of Na//DRPCF-2/1-700 maintained a capacity of 328.2 mAh g^(-1) after being cycled at 1 A g^(-1) for 900 cycles,and a half battery of K//DRPC-2/1-700 maintained a capacity of 321.5 mAh g^(-1) after being cycled at 1 A g^(-1) for 1200 cycles.The rate capability and cycling stability achieved by DRPCF-2/1-700 outperforms most reported carbon materials.Finally,ex-situ Raman spectroscopy analysis result confirms that the filling and removing of K^(+)and Na^(+)from the electrochemically active defects are responsible for the high capacity,superior rate and cycling performance of the DRPCF-2/1-700 sample.
文摘Submicron scale temperature sensors are crucial for a range of applications,particularly in micro and na-noscale environments.One promising solution involves the use of active whispering gallery mode(WGM)microresonators.These resonators can be remotely excited and read out using free-space structures,simplifying the process of sensing.In this study,we present a submicron-scale temperature sensor with a remarkable sensitivity up to 185 pm/℃based on a trian-gular MAPbI3 nanoplatelet(NPL)laser.Notably,as temperature changes,the peak wavelength of the laser line shifts lin-early.This unique characteristic allows for precise temperature sensing by tracking the peak wavelength of the NPL laser.The optical modes are confined within the perovskite NPL,which measures just 85 nm in height,due to total internal reflec-tion.Our NPL laser boasts several key features,including a high Q of~2610 and a low laser threshold of about 19.8μJ·cm^(−2).The combination of exceptional sensitivity and ultra-small size makes our WGM device an ideal candidate for integration into systems that demand compact temperature sensors.This advancement paves the way for significant prog-ress in the development of ultrasmall temperature sensors,opening new possibilities across various fields.
文摘Research on two-dimensional(2D) materials has been explosively increasing in last seventeen years in varying subjects including condensed matter physics, electronic engineering, materials science, and chemistry since the mechanical exfoliation of graphene in 2004. Starting from graphene, 2D materials now have become a big family with numerous members and diverse categories. The unique structural features and physicochemical properties of 2D materials make them one class of the most appealing candidates for a wide range of potential applications. In particular, we have seen some major breakthroughs made in the field of 2D materials in last five years not only in developing novel synthetic methods and exploring new structures/properties but also in identifying innovative applications and pushing forward commercialisation. In this review, we provide a critical summary on the recent progress made in the field of 2D materials with a particular focus on last five years. After a brief backgroundintroduction, we first discuss the major synthetic methods for 2D materials, including the mechanical exfoliation, liquid exfoliation, vapor phase deposition, and wet-chemical synthesis as well as phase engineering of 2D materials belonging to the field of phase engineering of nanomaterials(PEN). We then introduce the superconducting/optical/magnetic properties and chirality of 2D materials along with newly emerging magic angle 2D superlattices. Following that, the promising applications of 2D materials in electronics, optoelectronics, catalysis, energy storage, solar cells, biomedicine, sensors, environments, etc. are described sequentially. Thereafter, we present the theoretic calculations and simulations of 2D materials. Finally, after concluding the current progress, we provide some personal discussions on the existing challenges and future outlooks in this rapidly developing field.
文摘In recent years, the increasing demand of various fields of radiation detection materials has led to intensive researches in scintillation materials 1-2]. The scintillators can absorb high-energy X-ray photons and then convert them into low-energy visible photons, which are widely applied in radiation monitoring, security detection, X-ray astronomy and medical radiology 3"l].
基金Project(2022YFB3602804)supported by the National Key Research and Development Program of ChinaProjects(52233011,61974066,U21A2078)supported by the National Natural Science Foundation of China。
