Geological structures often exhibit smooth characteristics away from sharp discontinuities. One aim of geophysical inversion is to recover information about the smooth structures as well as about the sharp discontinui...Geological structures often exhibit smooth characteristics away from sharp discontinuities. One aim of geophysical inversion is to recover information about the smooth structures as well as about the sharp discontinuities. Because no specific operator can provide a perfect sparse representation of complicated geological models, hyper-parameter regularization inversion based on the iterative split Bregman method was used to recover the features of both smooth and sharp geological structures. A novel preconditioned matrix was proposed, which counteracted the natural decay of the sensitivity matrix and its inverse matrix was calculated easily. Application of the algorithm to synthetic data produces density models that are good representations of the designed models. The results show that the algorithm proposed is feasible and effective.展开更多
Brazilian disc tests were undertaken on a number of red sandstone samples with different water absorption ratios.The tensile strength of the red sandstone decreases as the water absorption ratio increases.The fracture...Brazilian disc tests were undertaken on a number of red sandstone samples with different water absorption ratios.The tensile strength of the red sandstone decreases as the water absorption ratio increases.The fracture surfaces of failed red sandstone discs were scanned by Talysurf CLI 2000.With the aid of Talymap Gold software,based on ISO25178,a set of statistical parameters was obtained for the fracture surfaces.The maximum peak height(S_p),maximum pit height(S_v) and maximum height(S_z) of the fracture surfaces exhibited the same decreasing trend with increasing water absorption.Sa and Sku values for the fracture surfaces showed a downward trend as the water absorption ratio increased.The fractal dimensions of fracture surfaces were calculated and found to decrease as the water absorption ratio increased.Through analysis of PSD curves,the smallest dominant wavelength was observed to reflect the roughness of the fracture surfaces.Additionally,the results suggest that the roughness of fracture surfaces becomes small as the water absorption ratio increases.展开更多
The pre-burying iron sheets approach was used to prepare rock-like materials with ordered multiple pre-cracks. 60 specimens in total were prepared in these experiments. Through biaxial compression experiments, the inf...The pre-burying iron sheets approach was used to prepare rock-like materials with ordered multiple pre-cracks. 60 specimens in total were prepared in these experiments. Through biaxial compression experiments, the influence of both the number of pre-cracks and pre-cracks angles to crack growth was analyzed. Meanwhile, species of rock bridge failure were summarized, namely, wing crack, secondary shear crack between horizontal pre-cracks and secondary shear crack between vertical pre-cracks. The wing crack plays a significant role in crack growth. Furthermore, fractal dimension was adopted to describe quantitatively the crack growth during the failure process. The results indicate that with the failure of specimens, corresponding fractal dimension for specimen monotonically increases, which indicates that the fractal dimension can be considered to the failure of the specimens quantitatively.展开更多
基金Projects(41174061,41374120)supported by the National Natural Science Foundation of China
文摘Geological structures often exhibit smooth characteristics away from sharp discontinuities. One aim of geophysical inversion is to recover information about the smooth structures as well as about the sharp discontinuities. Because no specific operator can provide a perfect sparse representation of complicated geological models, hyper-parameter regularization inversion based on the iterative split Bregman method was used to recover the features of both smooth and sharp geological structures. A novel preconditioned matrix was proposed, which counteracted the natural decay of the sensitivity matrix and its inverse matrix was calculated easily. Application of the algorithm to synthetic data produces density models that are good representations of the designed models. The results show that the algorithm proposed is feasible and effective.
基金Project(E21527)supported by Open Research Fund Program of Hunan Provincial Key Laboratory of Shale Gas Resource Utilization,Hunan University of Science and Technology,ChinaProjects(51174088,51174228)supported by the National Natural Science Foundation of China+1 种基金Project(2013CB035401)supported by the National Basic Research Program of ChinaProject(2015zzts077)supported by the Fundamental Research Funds for the Central Universities,China
文摘Brazilian disc tests were undertaken on a number of red sandstone samples with different water absorption ratios.The tensile strength of the red sandstone decreases as the water absorption ratio increases.The fracture surfaces of failed red sandstone discs were scanned by Talysurf CLI 2000.With the aid of Talymap Gold software,based on ISO25178,a set of statistical parameters was obtained for the fracture surfaces.The maximum peak height(S_p),maximum pit height(S_v) and maximum height(S_z) of the fracture surfaces exhibited the same decreasing trend with increasing water absorption.Sa and Sku values for the fracture surfaces showed a downward trend as the water absorption ratio increased.The fractal dimensions of fracture surfaces were calculated and found to decrease as the water absorption ratio increased.Through analysis of PSD curves,the smallest dominant wavelength was observed to reflect the roughness of the fracture surfaces.Additionally,the results suggest that the roughness of fracture surfaces becomes small as the water absorption ratio increases.
基金Project(E21527)supported by the Open Research Fund Program of Hunan Provincial Key Laboratory of Shale Gas Resource Utilization,ChinaProject(2015zzts077)supported by the Fundamental Research Funds for the Central Universities,China+1 种基金Projects(51174088,51174228)supported by the National Natural Science Foundation of ChinaProject(2013CB035401)supported by the National Basic Research Program of China
文摘The pre-burying iron sheets approach was used to prepare rock-like materials with ordered multiple pre-cracks. 60 specimens in total were prepared in these experiments. Through biaxial compression experiments, the influence of both the number of pre-cracks and pre-cracks angles to crack growth was analyzed. Meanwhile, species of rock bridge failure were summarized, namely, wing crack, secondary shear crack between horizontal pre-cracks and secondary shear crack between vertical pre-cracks. The wing crack plays a significant role in crack growth. Furthermore, fractal dimension was adopted to describe quantitatively the crack growth during the failure process. The results indicate that with the failure of specimens, corresponding fractal dimension for specimen monotonically increases, which indicates that the fractal dimension can be considered to the failure of the specimens quantitatively.
