Despite their high manufacturing cost and structural deficiencies especially in tip regions,highly skewed propellers are preferred in the marine industry,where underwater noise is a significant design criterion.Howeve...Despite their high manufacturing cost and structural deficiencies especially in tip regions,highly skewed propellers are preferred in the marine industry,where underwater noise is a significant design criterion.However,hydrodynamic performances should also be considered before a decision to use these propellers is made.This study investigates the trade-off between hydrodynamic and hydroacoustic performances by comparing conventional and highly skewed Seiun Maru marine propellers for a noncavitating case.Many papers in the literature focus solely on hydroacoustic calculations for the open-water case.However,propulsive characteristics are significantly different when propeller-hull interactions take place.Changes in propulsion performance also reflect on the hydroacoustic performances of the propeller.In this study,propeller-hull interactions were considered to calculate the noise spectra.Rather than solving the full case,which is computationally demanding,an indirect approach was adopted;axial velocities from the nominal ship wake were introduced as the inlet condition of the numerical approach.A hybrid method based on the acoustic analogy was used in coupling computational fluid dynamics techniques with acoustic propagation methods,implementing the Ffowcs Williams-Hawkings(FW-H)equation.The hydrodynamic performances of both propellers were presented as a preliminary study.Propeller-hull interactions were included in calculations after observing good accordance between our results,experiments,and quasi-continuous method for the open-water case.With the use of the time-dependent flow field data of the propeller behind a nonuniform ship wake as an input,simulation results were used to solve the FW-H equation to extract acoustic pressure and sound pressure levels for several hydrophones located in the near field.Noise spectra results confirm that the highest values of the sound pressure levels are in the low-frequency range and the first harmonics calculated by the present method are in good accordance with the theoretical values.Results also show that a highly skewed propeller generates less noise even in noncavitating cases despite a small reduction in hydrodynamic efficiency.展开更多
The exhaust smoke dispersion for a generic frigate is investigated numerically through the numerical solution of the governing fluid flow, energy, species and turbulence equations. The main objective of this work is t...The exhaust smoke dispersion for a generic frigate is investigated numerically through the numerical solution of the governing fluid flow, energy, species and turbulence equations. The main objective of this work is to obtain the effects of the yaw angle velocity ratio and buoyancy on the dispersion of the exhaust smoke The numerical method is based on the fully conserved control-volume representation of the fully elliptic Navier-Stokes equations. Turbulence is modeled using a two-equation （k-ε） model The flow visualization tests using a 1/100 scale model of the frigate in the wind tunnel were also carried out to determine the exhaust plume path and to validatc the computational results. The results show that down wash phenomena occurs for the yaw angles between ψ=10° and 20°. The results with different exhaust gas temperatures show that the buoyancy effect increases with the increasing of the exhaust gas temperature. However, its effect on the plume rise is less significant in comparison with its momentum. A good agreement between the predictions and experiment results is obtained.展开更多
In this study,the coupled torsional-transverse vibration of a propeller shaft system owing to the misalignment caused by the shaft rotation was investigated.The proposed numerical model is based on the modified versio...In this study,the coupled torsional-transverse vibration of a propeller shaft system owing to the misalignment caused by the shaft rotation was investigated.The proposed numerical model is based on the modified version of the Jeffcott rotor model.The equation of motion describing the harmonic vibrations of the system was obtained using the Euler-Lagrange equations for the associated energy functional.Experiments considering different rotation speeds and axial loads acting on the propulsion shaft system were performed to verify the numerical model.The effects of system parameters such as shaft length and diameter,stiffness and damping coefficients,and cross-section eccentricity were also studied.The cross-section eccentricity increased the displacement response,yet coupled vibrations were not initially observed.With the increase in the eccentricity,the interaction between two vibration modes became apparent,and the agreement between numerical predictions and experimental measurements improved.Given the results,the modified version of the Jeffcott rotor model can represent the coupled torsional-transverse vibration of propulsion shaft systems.展开更多
Blast pressure measurements of a controlled underwater explosion in the sea were carried out.An explosive of 25-kg trinitro-toluene(TNT)equivalent was detonated,and the blast pressures were recorded by eight diferent ...Blast pressure measurements of a controlled underwater explosion in the sea were carried out.An explosive of 25-kg trinitro-toluene(TNT)equivalent was detonated,and the blast pressures were recorded by eight diferent high-performance pressure sensors that work at the nonresonant high-voltage output in adverse underwater conditions.Recorded peak pressure values are used to establish a relationship in the well-known form of empirical underwater explosion(UNDEX)loading formula.Constants of the formula are redetermined by employing the least-squares method in two diferent forms for best ftting to the measured data.The newly determined constants are found to be only slightly diferent from the generally accepted ones.展开更多
Ship propulsion performance heavily depends on cavitation,increasing the recent interest in this field to lower ship emissions.Academic research on the effects of cavitation is generally based on the open-water propel...Ship propulsion performance heavily depends on cavitation,increasing the recent interest in this field to lower ship emissions.Academic research on the effects of cavitation is generally based on the open-water propeller performance but the interactions of the cavitating propeller with the ship hull significantly affect the propulsion performance of the ship.In this study,we first investigate the INSEAN E779A propeller by a RANSE-based CFD in open-water conditions.The numerical implementation and the selected grid after sensitivity analysis partially succeeded in modeling the cavitating flow around the propeller.Satisfactory agreement was observed compared to experimental measurements.Then,using the open-water data as input,the propeller’s performance behind a full-scale ship was calculated under self-propulsion conditions.Despite being an undesired incident,we found a rare condition in which cavitation enhances propulsion efficiency.Atσ=1.5;the propeller rotation rate was lower,while the thrust and torque coefficients were higher.展开更多
基金The third author acknowledges the financial support from the Scientific and Technological Research Council of Turkey(TUBITAK),Project ID:218 M372.
文摘Despite their high manufacturing cost and structural deficiencies especially in tip regions,highly skewed propellers are preferred in the marine industry,where underwater noise is a significant design criterion.However,hydrodynamic performances should also be considered before a decision to use these propellers is made.This study investigates the trade-off between hydrodynamic and hydroacoustic performances by comparing conventional and highly skewed Seiun Maru marine propellers for a noncavitating case.Many papers in the literature focus solely on hydroacoustic calculations for the open-water case.However,propulsive characteristics are significantly different when propeller-hull interactions take place.Changes in propulsion performance also reflect on the hydroacoustic performances of the propeller.In this study,propeller-hull interactions were considered to calculate the noise spectra.Rather than solving the full case,which is computationally demanding,an indirect approach was adopted;axial velocities from the nominal ship wake were introduced as the inlet condition of the numerical approach.A hybrid method based on the acoustic analogy was used in coupling computational fluid dynamics techniques with acoustic propagation methods,implementing the Ffowcs Williams-Hawkings(FW-H)equation.The hydrodynamic performances of both propellers were presented as a preliminary study.Propeller-hull interactions were included in calculations after observing good accordance between our results,experiments,and quasi-continuous method for the open-water case.With the use of the time-dependent flow field data of the propeller behind a nonuniform ship wake as an input,simulation results were used to solve the FW-H equation to extract acoustic pressure and sound pressure levels for several hydrophones located in the near field.Noise spectra results confirm that the highest values of the sound pressure levels are in the low-frequency range and the first harmonics calculated by the present method are in good accordance with the theoretical values.Results also show that a highly skewed propeller generates less noise even in noncavitating cases despite a small reduction in hydrodynamic efficiency.
基金the financial support received from the Scientific Research Projects Office of Istanbul Technical University,stanbul, Turkey for the project titled as ‘Numerical and Experimental Investigation of Exhaust Smoke Dispersion for Naval Ships’
文摘The exhaust smoke dispersion for a generic frigate is investigated numerically through the numerical solution of the governing fluid flow, energy, species and turbulence equations. The main objective of this work is to obtain the effects of the yaw angle velocity ratio and buoyancy on the dispersion of the exhaust smoke The numerical method is based on the fully conserved control-volume representation of the fully elliptic Navier-Stokes equations. Turbulence is modeled using a two-equation （k-ε） model The flow visualization tests using a 1/100 scale model of the frigate in the wind tunnel were also carried out to determine the exhaust plume path and to validatc the computational results. The results show that down wash phenomena occurs for the yaw angles between ψ=10° and 20°. The results with different exhaust gas temperatures show that the buoyancy effect increases with the increasing of the exhaust gas temperature. However, its effect on the plume rise is less significant in comparison with its momentum. A good agreement between the predictions and experiment results is obtained.
基金supported by the Scientific and Technological Research Council of Turkey(TUBITAK)2214-A International Doctoral Research Fellowship Programmewhile experiments were performed at the Wuhan University of Technology。
文摘In this study,the coupled torsional-transverse vibration of a propeller shaft system owing to the misalignment caused by the shaft rotation was investigated.The proposed numerical model is based on the modified version of the Jeffcott rotor model.The equation of motion describing the harmonic vibrations of the system was obtained using the Euler-Lagrange equations for the associated energy functional.Experiments considering different rotation speeds and axial loads acting on the propulsion shaft system were performed to verify the numerical model.The effects of system parameters such as shaft length and diameter,stiffness and damping coefficients,and cross-section eccentricity were also studied.The cross-section eccentricity increased the displacement response,yet coupled vibrations were not initially observed.With the increase in the eccentricity,the interaction between two vibration modes became apparent,and the agreement between numerical predictions and experimental measurements improved.Given the results,the modified version of the Jeffcott rotor model can represent the coupled torsional-transverse vibration of propulsion shaft systems.
文摘Blast pressure measurements of a controlled underwater explosion in the sea were carried out.An explosive of 25-kg trinitro-toluene(TNT)equivalent was detonated,and the blast pressures were recorded by eight diferent high-performance pressure sensors that work at the nonresonant high-voltage output in adverse underwater conditions.Recorded peak pressure values are used to establish a relationship in the well-known form of empirical underwater explosion(UNDEX)loading formula.Constants of the formula are redetermined by employing the least-squares method in two diferent forms for best ftting to the measured data.The newly determined constants are found to be only slightly diferent from the generally accepted ones.
文摘Ship propulsion performance heavily depends on cavitation,increasing the recent interest in this field to lower ship emissions.Academic research on the effects of cavitation is generally based on the open-water propeller performance but the interactions of the cavitating propeller with the ship hull significantly affect the propulsion performance of the ship.In this study,we first investigate the INSEAN E779A propeller by a RANSE-based CFD in open-water conditions.The numerical implementation and the selected grid after sensitivity analysis partially succeeded in modeling the cavitating flow around the propeller.Satisfactory agreement was observed compared to experimental measurements.Then,using the open-water data as input,the propeller’s performance behind a full-scale ship was calculated under self-propulsion conditions.Despite being an undesired incident,we found a rare condition in which cavitation enhances propulsion efficiency.Atσ=1.5;the propeller rotation rate was lower,while the thrust and torque coefficients were higher.
