The paper describes field test results of 7.62×51 mm M61 AP(armour piercing) ammunition fired into mild steel targets at an outdoor range.The targets varied from 10 mm to 32 mm in thickness.The tests recorded pen...The paper describes field test results of 7.62×51 mm M61 AP(armour piercing) ammunition fired into mild steel targets at an outdoor range.The targets varied from 10 mm to 32 mm in thickness.The tests recorded penetration depth,probability of perforation(i.e.,complete penetration),muzzle and impact velocities,bullet mass,and plate yield strength and hardness.The measured penetration depth exhibited a variability of approximately±12%.The paper then compared ballistic test results with predictive models of steel penetration depth and thickness to prevent perforation.Statistical parameters were derived for muzzle and impact velocity,bullet mass,plate thickness,plate hardness,and model error.A Monte-Carlo probabilistic analysis was then developed to estimate the probability of plate perforation of 7.62 mm M61 AP ammunition for a range of impact velocities,and for mild steels,and High Hardness Armour(HHA) plates.This perforation fragility analysis considered the random variability of impact velocity,bullet mass,plate thickness,plate hardness,and model error.Such a probabilistic analysis allows for reliability-based design,where,for example,the plate thickness with 95% reliability(i.e.only 1 in 20 shots will penetrate the wall) can be estimated knowing the probabilistic distribution of perforation.Hence,it was found that the plate thickness to ensure a low 5% probability of perforation needs to be 11-15% thicker than required to have a 50/50 chance of perforation for mild steel plates.Plates would need to be 20-30% thicker if probability of perforation is reduced to zero.展开更多
Person-borne improvised explosive devices(PBIEDs)are often used in terrorist attacks in Western countries.This study aims to predict the trajectories of PBIED fragments and the subsequent safety risks for people expos...Person-borne improvised explosive devices(PBIEDs)are often used in terrorist attacks in Western countries.This study aims to predict the trajectories of PBIED fragments and the subsequent safety risks for people exposed to this hazard.An explosive field test with a typical PBIED composed of a plastic explosive charge and steel nut enhancements was performed to record initial fragment behaviour,including positions,velocity,and trajectory angles.These data were used to predict the full trajectory of PBIED fragments using a probabilistic analysis.In the probabilistic analyses a probability of fatality or serious injury was computed.Based on the results presented,many practical conclusions can be drawn,for instance,regarding safe evacuation distances if a person were exposed to a suspected PBIED.展开更多
基金The authors appreciate the laboratory assistance of Goran Simundic and Michael Goodwin for assistance with measurement of the field test results The assistance of final year honours student Richard Szlicht is gratefully acknowledged.
文摘The paper describes field test results of 7.62×51 mm M61 AP(armour piercing) ammunition fired into mild steel targets at an outdoor range.The targets varied from 10 mm to 32 mm in thickness.The tests recorded penetration depth,probability of perforation(i.e.,complete penetration),muzzle and impact velocities,bullet mass,and plate yield strength and hardness.The measured penetration depth exhibited a variability of approximately±12%.The paper then compared ballistic test results with predictive models of steel penetration depth and thickness to prevent perforation.Statistical parameters were derived for muzzle and impact velocity,bullet mass,plate thickness,plate hardness,and model error.A Monte-Carlo probabilistic analysis was then developed to estimate the probability of plate perforation of 7.62 mm M61 AP ammunition for a range of impact velocities,and for mild steels,and High Hardness Armour(HHA) plates.This perforation fragility analysis considered the random variability of impact velocity,bullet mass,plate thickness,plate hardness,and model error.Such a probabilistic analysis allows for reliability-based design,where,for example,the plate thickness with 95% reliability(i.e.only 1 in 20 shots will penetrate the wall) can be estimated knowing the probabilistic distribution of perforation.Hence,it was found that the plate thickness to ensure a low 5% probability of perforation needs to be 11-15% thicker than required to have a 50/50 chance of perforation for mild steel plates.Plates would need to be 20-30% thicker if probability of perforation is reduced to zero.
基金This work was supported by the Poland National Center for Research and Development,under the grant DOB-BIO10/01/02/2019 within the Defence and Security Programme.
文摘Person-borne improvised explosive devices(PBIEDs)are often used in terrorist attacks in Western countries.This study aims to predict the trajectories of PBIED fragments and the subsequent safety risks for people exposed to this hazard.An explosive field test with a typical PBIED composed of a plastic explosive charge and steel nut enhancements was performed to record initial fragment behaviour,including positions,velocity,and trajectory angles.These data were used to predict the full trajectory of PBIED fragments using a probabilistic analysis.In the probabilistic analyses a probability of fatality or serious injury was computed.Based on the results presented,many practical conclusions can be drawn,for instance,regarding safe evacuation distances if a person were exposed to a suspected PBIED.
