Although bismuth vanadate(BiVO4)has been promising as photoanode material for photoelectrochemical water splitting,its charge recombination issue by short charge diffusion length has led to various studies about heter...Although bismuth vanadate(BiVO4)has been promising as photoanode material for photoelectrochemical water splitting,its charge recombination issue by short charge diffusion length has led to various studies about heterostructure photoanodes.As a hole blocking layer of BiVO4,titanium dioxide(TiO_(2)) has been considered unsuitable because of its relatively positive valence band edge and low electrical conductivity.Herein,a crystal facet engineering of TiO_(2) nanostructures is proposed to control band structures for the hole blocking layer of BiVO4 nanodots.We design two types of TiO_(2) nanostructures,which are nanorods(NRs)and nanoflowers(NFs)with different(001)and(110)crystal facets,respectively,and fabricate BiVO4/TiO_(2) heterostructure photoanodes.The BiVO4/TiO_(2) NFs showed 4.8 times higher photocurrent density than the BiVO4/TiO_(2) NRs.Transient decay time analysis and time-resolved photoluminescence reveal the enhancement is attributed to the reduced charge recombination,which is originated from the formation of type II band alignment between BiVO4 nanodots and TiO_(2) NFs.This work provides not only new insights into the interplay between crystal facets and band structures but also important steps for the design of highly efficient photoelectrodes.展开更多
Micro-light-emitting diodes(μLEDs)have gained significant interest as an activation source for gas sensors owing to their advantages,including room temperature operation and low power consumption.However,despite thes...Micro-light-emitting diodes(μLEDs)have gained significant interest as an activation source for gas sensors owing to their advantages,including room temperature operation and low power consumption.However,despite these benefits,challenges still exist such as a limited range of detectable gases and slow response.In this study,we present a blueμLED-integrated light-activated gas sensor array based on SnO_(2)nanoparticles(NPs)that exhibit excellent sensitivity,tunable selectivity,and rapid detection with micro-watt level power consumption.The optimal power forμLED is observed at the highest gas response,supported by finite-difference time-domain simulation.Additionally,we first report the visible light-activated selective detection of reducing gases using noble metal-decorated SnO_(2)NPs.The noble metals induce catalytic interaction with reducing gases,clearly distinguishing NH3,H2,and C2H5OH.Real-time gas monitoring based on a fully hardwareimplemented light-activated sensing array was demonstrated,opening up new avenues for advancements in light-activated electronic nose technologies.展开更多
Two-dimensional(2D)transition metal chalcogenides(TMC)and their heterostructures are appealing as building blocks in a wide range of electronic and optoelectronic devices,particularly futuristic memristive and synapti...Two-dimensional(2D)transition metal chalcogenides(TMC)and their heterostructures are appealing as building blocks in a wide range of electronic and optoelectronic devices,particularly futuristic memristive and synaptic devices for brain-inspired neuromorphic computing systems.The distinct properties such as high durability,electrical and optical tunability,clean surface,flexibility,and LEGO-staking capability enable simple fabrication with high integration density,energy-efficient operation,and high scalability.This review provides a thorough examination of high-performance memristors based on 2D TMCs for neuromorphic computing applications,including the promise of 2D TMC materials and heterostructures,as well as the state-of-the-art demonstration of memristive devices.The challenges and future prospects for the development of these emerging materials and devices are also discussed.The purpose of this review is to provide an outlook on the fabrication and characterization of neuromorphic memristors based on 2D TMCs.展开更多
Recently,artificial synapses involving an electrochemical reaction of Li-ion have been attributed to have remarkable synaptic properties.Three-terminal synaptic transistors utilizing Li-ion intercalation exhibits reli...Recently,artificial synapses involving an electrochemical reaction of Li-ion have been attributed to have remarkable synaptic properties.Three-terminal synaptic transistors utilizing Li-ion intercalation exhibits reliable synaptic characteristics by exploiting the advantage of nondistributed weight updates owing to stable ion migrations.However,the three-terminal configurations with large and complex structures impede the crossbar array implementation required for hardware neuromorphic systems.Meanwhile,achieving adequate synaptic performances through effective Li-ion intercalation in vertical two-terminal synaptic devices for array integration remains challenging.Here,two-terminal Au/LixCoO_(2)/Pt artificial synapses are proposed with the potential for practical implementation of hardware neural networks.The Au/LixCoO_(2)/Pt devices demonstrated extraordinary neuromorphic behaviors based on a progressive dearth of Li in LixCoO_(2)films.The intercalation and deintercalation of Li-ion inside the films are precisely controlled over the weight control spike,resulting in improved weight control functionality.Various types of synaptic plasticity were imitated and assessed in terms of key factors such as nonlinearity,symmetricity,and dynamic range.Notably,the LixCoO_(2)-based neuromorphic system outperformed three-terminal synaptic transistors in simulations of convolutional neural networks and multilayer perceptrons due to the high linearity and low programming error.These impressive performances suggest the vertical two-terminal Au/LixCoO_(2)/Pt artificial synapses as promising candidates for hardware neural networks.展开更多
Flexible supercapacitor electrodes with high mass loading are crucial for obtaining favorable electrochemical performance but still challenging due to sluggish electron and ion transport.Herein,rationally designed CNT...Flexible supercapacitor electrodes with high mass loading are crucial for obtaining favorable electrochemical performance but still challenging due to sluggish electron and ion transport.Herein,rationally designed CNT/MnO2/graphene-grafted carbon cloth electrodes are prepared by a“graft-deposit-coat”strategy.Due to the large surface area and good conductivity,graphene grafted on carbon cloth offers additional surface areas for the uniform deposition of MnO2(9.1 mg cm?2)and facilitates charge transfer.Meanwhile,the nanostructured MnO2 provides abundant electroactive sites and short ion transport distance,and CNT coated on MnO2 acts as interconnected conductive“highways”to accelerate the electron transport,significantly improving redox reaction kinetics.Benefiting from high mass loading of electroactive materials,favorable conductivity,and a porous structure,the electrode achieves large areal capacitances without compromising rate capability.The assembled asymmetric supercapacitor demonstrates a wide working voltage(2.2 V)and high energy density of 10.18 mWh cm?3.展开更多
The exfoliation of bulk graphitic carbon nitride(g-C_(3)N_(4))into monolayer has been intensively studied to induce maximum sur-face area for fundamental studies,but ended in failure to realize chemi-cally and physica...The exfoliation of bulk graphitic carbon nitride(g-C_(3)N_(4))into monolayer has been intensively studied to induce maximum sur-face area for fundamental studies,but ended in failure to realize chemi-cally and physically well-defined monolayer of g-C_(3)N_(4)mostly due to the difficulty in reducing the layer thickness down to an atomic level.It has,therefore,remained as a challenging issue in two-dimensional(2D)chemistry and physics communities.In this study,an“atomic monolayer of g-C_(3)N_(4)with perfect two-dimensional limit”was successfully prepared by the chemically well-defined two-step routes.The atomically resolved monolayer of g-C_(3)N_(4)was also confirmed by spectroscopic and micro-scopic analyses.In addition,the experimental Cs-HRTEM image was collected,for the first time,which was in excellent agreement with the theoretically simulated;the evidence of monolayer of g-C_(3)N_(4)in the perfect 2D limit becomes now clear from the HRTEM image of orderly hexagonal symmetry with a cavity formed by encirclement of three adjacent heptazine units.Compared to bulk g-C_(3)N_(4),the present g-C_(3)N_(4)monolayer showed significantly higher photocatalytic gen-eration of H2O2 and H2,and electrocatalytic oxygen reduction reaction.In addition,its photocatalytic efficiency for H2O2 production was found to be the best for any known g-C_(3)N_(4)nanomaterials,underscoring the remarkable advantage of monolayer formation in optimizing the catalyst performance of g-C_(3)N_(4).展开更多
The original version of this article,unfortunately,contained some mistakes and unintentional wrong description of Fig.6 and the caption of Figs.9,10.The correct version of Fig.6 is below.The mentioned figure name for ...The original version of this article,unfortunately,contained some mistakes and unintentional wrong description of Fig.6 and the caption of Figs.9,10.The correct version of Fig.6 is below.The mentioned figure name for the Fig.6 on the manuscript should be updated.In 2D vdW synaptic devices,the length of the tunneling barrier can be increased or decreased on the trapped or detrapped electrons.Kumar et al.reported memristive and neuromorphic devices composed of vertically grown WS2 layer and ZnO(Fig.6e)[149].The interlayer separation between WS2 and ZnO layers serves as an effective porous medium allowing the ZnO to grow with defects.The interfacial region of ZnO,the very contiguous to WS2 layer.展开更多
The cell-type continuous electromagnetic radiation system is a demonstration device capable of generating high-power millimeter electromagnetic waves of a specific wavelength and observing their effects on living orga...The cell-type continuous electromagnetic radiation system is a demonstration device capable of generating high-power millimeter electromagnetic waves of a specific wavelength and observing their effects on living organisms.It irradiates a biological sample placed in a 30×30×50 cm^(3)cell with electromagnetic waves in the 3.15-mm-wavelength region(with an output of≥1 W)and analyzes the temperature change of the sample.A vacuum electronic device-based coupled-cavity backward-wave oscillator converts the electron energy of the electron beam into radiofrequency(RF)energy and radiates it to the target through an antenna,increasing the temperature through the absorption of RF energy in the skin.The system causes pain and ultimately reduces combat power.A cell-type continuous electromagnetic radiation system consisting of four parts—an electromagnetic-wave generator,a highvoltage power supply,a test cell,and a system controller—generates an RF signal of≥1 W in a continuous waveform at a 95-GHz center frequency,as well as a chemical solution with a dielectric constant similar to that of the skin of a living organism.An increase of 5°C lasting approximately 10 s was confirmed through an experiment.展开更多
Wearable and stretchable strain sensors have potential values in the fields of human motion and health monitoring,flexible electronics,and soft robotic skin.The wearable and stretchable strain sensors can be directly ...Wearable and stretchable strain sensors have potential values in the fields of human motion and health monitoring,flexible electronics,and soft robotic skin.The wearable and stretchable strain sensors can be directly attached to human skin,providing visualized detection for human motions and personal healthcare.Conductive polymer composites(CPC)composed of conductive fillers and flexible polymers have the advantages of high stretchability,good flexibility,superior durability,which can be used to prepare flexible strain sensors with large working strain and outstanding sensitivity.This review has put forward a comprehensive summary on the fabrication methods,advanced mechanisms and strain sensing abilities of CPC strain sensors reported in recent years,especially the sensors with superior performance.Finally,the structural design,bionic function,integration technology and further application of CPC strain sensors are prospected.展开更多
基金supported by the Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Science and ICT(MSIT)(2021R1A2B5B03001851)the NRF Grant funded by the Korean government MSIT(2021M3H4A1A03057403).M.G.L.acknowledges the Basic Science Research Program through the NRF funded by the Ministry of Education(2021R1A6A3A03039988).J.W.Y.acknowledges the Basic Science Research Program through the NRF funded by the Ministry of Education(2021R1A6A3A13046700).
文摘Although bismuth vanadate(BiVO4)has been promising as photoanode material for photoelectrochemical water splitting,its charge recombination issue by short charge diffusion length has led to various studies about heterostructure photoanodes.As a hole blocking layer of BiVO4,titanium dioxide(TiO_(2)) has been considered unsuitable because of its relatively positive valence band edge and low electrical conductivity.Herein,a crystal facet engineering of TiO_(2) nanostructures is proposed to control band structures for the hole blocking layer of BiVO4 nanodots.We design two types of TiO_(2) nanostructures,which are nanorods(NRs)and nanoflowers(NFs)with different(001)and(110)crystal facets,respectively,and fabricate BiVO4/TiO_(2) heterostructure photoanodes.The BiVO4/TiO_(2) NFs showed 4.8 times higher photocurrent density than the BiVO4/TiO_(2) NRs.Transient decay time analysis and time-resolved photoluminescence reveal the enhancement is attributed to the reduced charge recombination,which is originated from the formation of type II band alignment between BiVO4 nanodots and TiO_(2) NFs.This work provides not only new insights into the interplay between crystal facets and band structures but also important steps for the design of highly efficient photoelectrodes.
基金supported by the Nano&Material Technology Development Program through the National Research Foundation of Korea(NRF)funded by Ministry of Science and ICT(RS-2024-00405016)supported by“Cooperative Research Program for Agriculture Science and Technology Development(Project No.PJ01706703)”Rural Development Administration,Republic of Korea.The Inter-University Semiconductor Research Center and Institute of Engineering Research at Seoul National University provided research facilities for this work.
文摘Micro-light-emitting diodes(μLEDs)have gained significant interest as an activation source for gas sensors owing to their advantages,including room temperature operation and low power consumption.However,despite these benefits,challenges still exist such as a limited range of detectable gases and slow response.In this study,we present a blueμLED-integrated light-activated gas sensor array based on SnO_(2)nanoparticles(NPs)that exhibit excellent sensitivity,tunable selectivity,and rapid detection with micro-watt level power consumption.The optimal power forμLED is observed at the highest gas response,supported by finite-difference time-domain simulation.Additionally,we first report the visible light-activated selective detection of reducing gases using noble metal-decorated SnO_(2)NPs.The noble metals induce catalytic interaction with reducing gases,clearly distinguishing NH3,H2,and C2H5OH.Real-time gas monitoring based on a fully hardwareimplemented light-activated sensing array was demonstrated,opening up new avenues for advancements in light-activated electronic nose technologies.
基金supported by the Characterization platform for advanced materials funded by the Korea Research Institute of Standards and Science(KRISS-2021-GP2021-0011)supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government MSIT(2021M3D1A20396541).
文摘Two-dimensional(2D)transition metal chalcogenides(TMC)and their heterostructures are appealing as building blocks in a wide range of electronic and optoelectronic devices,particularly futuristic memristive and synaptic devices for brain-inspired neuromorphic computing systems.The distinct properties such as high durability,electrical and optical tunability,clean surface,flexibility,and LEGO-staking capability enable simple fabrication with high integration density,energy-efficient operation,and high scalability.This review provides a thorough examination of high-performance memristors based on 2D TMCs for neuromorphic computing applications,including the promise of 2D TMC materials and heterostructures,as well as the state-of-the-art demonstration of memristive devices.The challenges and future prospects for the development of these emerging materials and devices are also discussed.The purpose of this review is to provide an outlook on the fabrication and characterization of neuromorphic memristors based on 2D TMCs.
基金financially supported by National R&D Program(2018M3D1A1058793,2021M3H4A3A02086430)through NRF(National Research Foundation of Korea)funded by the Ministry of Science and ICTsupported by SAIT,Samsung Electronics Co.,Ltd。
文摘Recently,artificial synapses involving an electrochemical reaction of Li-ion have been attributed to have remarkable synaptic properties.Three-terminal synaptic transistors utilizing Li-ion intercalation exhibits reliable synaptic characteristics by exploiting the advantage of nondistributed weight updates owing to stable ion migrations.However,the three-terminal configurations with large and complex structures impede the crossbar array implementation required for hardware neuromorphic systems.Meanwhile,achieving adequate synaptic performances through effective Li-ion intercalation in vertical two-terminal synaptic devices for array integration remains challenging.Here,two-terminal Au/LixCoO_(2)/Pt artificial synapses are proposed with the potential for practical implementation of hardware neural networks.The Au/LixCoO_(2)/Pt devices demonstrated extraordinary neuromorphic behaviors based on a progressive dearth of Li in LixCoO_(2)films.The intercalation and deintercalation of Li-ion inside the films are precisely controlled over the weight control spike,resulting in improved weight control functionality.Various types of synaptic plasticity were imitated and assessed in terms of key factors such as nonlinearity,symmetricity,and dynamic range.Notably,the LixCoO_(2)-based neuromorphic system outperformed three-terminal synaptic transistors in simulations of convolutional neural networks and multilayer perceptrons due to the high linearity and low programming error.These impressive performances suggest the vertical two-terminal Au/LixCoO_(2)/Pt artificial synapses as promising candidates for hardware neural networks.
基金supported by the Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(NRF2018R1D1A1B07051249)Nano Material Technology Development Program(NRF-2015M3A7B6027970)of MSIP/NRF and Center for Integrated Smart Sensors funded by the Ministry of Science,ICTFuture Planning,Republic of Korea,as Global Frontier Project(CISS-2012M3A6A6054186).
文摘Flexible supercapacitor electrodes with high mass loading are crucial for obtaining favorable electrochemical performance but still challenging due to sluggish electron and ion transport.Herein,rationally designed CNT/MnO2/graphene-grafted carbon cloth electrodes are prepared by a“graft-deposit-coat”strategy.Due to the large surface area and good conductivity,graphene grafted on carbon cloth offers additional surface areas for the uniform deposition of MnO2(9.1 mg cm?2)and facilitates charge transfer.Meanwhile,the nanostructured MnO2 provides abundant electroactive sites and short ion transport distance,and CNT coated on MnO2 acts as interconnected conductive“highways”to accelerate the electron transport,significantly improving redox reaction kinetics.Benefiting from high mass loading of electroactive materials,favorable conductivity,and a porous structure,the electrode achieves large areal capacitances without compromising rate capability.The assembled asymmetric supercapacitor demonstrates a wide working voltage(2.2 V)and high energy density of 10.18 mWh cm?3.
基金supported by Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(No.2020R1I1A1A01072161)and under the framework of the International Cooperation Program managed by NRF(No.2017K2A9A2A10013104)supported by the NRF grant funded by the Korea government(MSIP)(No.NRF-2020R1A2C3008671).
文摘The exfoliation of bulk graphitic carbon nitride(g-C_(3)N_(4))into monolayer has been intensively studied to induce maximum sur-face area for fundamental studies,but ended in failure to realize chemi-cally and physically well-defined monolayer of g-C_(3)N_(4)mostly due to the difficulty in reducing the layer thickness down to an atomic level.It has,therefore,remained as a challenging issue in two-dimensional(2D)chemistry and physics communities.In this study,an“atomic monolayer of g-C_(3)N_(4)with perfect two-dimensional limit”was successfully prepared by the chemically well-defined two-step routes.The atomically resolved monolayer of g-C_(3)N_(4)was also confirmed by spectroscopic and micro-scopic analyses.In addition,the experimental Cs-HRTEM image was collected,for the first time,which was in excellent agreement with the theoretically simulated;the evidence of monolayer of g-C_(3)N_(4)in the perfect 2D limit becomes now clear from the HRTEM image of orderly hexagonal symmetry with a cavity formed by encirclement of three adjacent heptazine units.Compared to bulk g-C_(3)N_(4),the present g-C_(3)N_(4)monolayer showed significantly higher photocatalytic gen-eration of H2O2 and H2,and electrocatalytic oxygen reduction reaction.In addition,its photocatalytic efficiency for H2O2 production was found to be the best for any known g-C_(3)N_(4)nanomaterials,underscoring the remarkable advantage of monolayer formation in optimizing the catalyst performance of g-C_(3)N_(4).
文摘The original version of this article,unfortunately,contained some mistakes and unintentional wrong description of Fig.6 and the caption of Figs.9,10.The correct version of Fig.6 is below.The mentioned figure name for the Fig.6 on the manuscript should be updated.In 2D vdW synaptic devices,the length of the tunneling barrier can be increased or decreased on the trapped or detrapped electrons.Kumar et al.reported memristive and neuromorphic devices composed of vertically grown WS2 layer and ZnO(Fig.6e)[149].The interlayer separation between WS2 and ZnO layers serves as an effective porous medium allowing the ZnO to grow with defects.The interfacial region of ZnO,the very contiguous to WS2 layer.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.NRF-2021M2E8A1038938,No.NRF-2021R1F1A1048374,and No.NRF-2016R1A3B1908336)supported by a grant of the Korea Institute of Radiological and Medical Sciences(KIRAMS),funded by the Ministry of Science and ICT(MSIT),Republic of Korea(No.50051—2021,No.50623—2021)。
文摘The cell-type continuous electromagnetic radiation system is a demonstration device capable of generating high-power millimeter electromagnetic waves of a specific wavelength and observing their effects on living organisms.It irradiates a biological sample placed in a 30×30×50 cm^(3)cell with electromagnetic waves in the 3.15-mm-wavelength region(with an output of≥1 W)and analyzes the temperature change of the sample.A vacuum electronic device-based coupled-cavity backward-wave oscillator converts the electron energy of the electron beam into radiofrequency(RF)energy and radiates it to the target through an antenna,increasing the temperature through the absorption of RF energy in the skin.The system causes pain and ultimately reduces combat power.A cell-type continuous electromagnetic radiation system consisting of four parts—an electromagnetic-wave generator,a highvoltage power supply,a test cell,and a system controller—generates an RF signal of≥1 W in a continuous waveform at a 95-GHz center frequency,as well as a chemical solution with a dielectric constant similar to that of the skin of a living organism.An increase of 5°C lasting approximately 10 s was confirmed through an experiment.
基金supported by the Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(NRF-2021R1A2C1008380)Nano Material Technology Development Program[NRF-2015M3A7B6027970]+1 种基金the Chey Institute for Advanced Studies'International Scholar Exchange Fellowship for the academic year of 2021-2022supported by the Korea Institute of Energy Technology Evaluation and Planning(KETEP)grant funded by the Korea government(MOTIE)(20215710100170).
文摘Wearable and stretchable strain sensors have potential values in the fields of human motion and health monitoring,flexible electronics,and soft robotic skin.The wearable and stretchable strain sensors can be directly attached to human skin,providing visualized detection for human motions and personal healthcare.Conductive polymer composites(CPC)composed of conductive fillers and flexible polymers have the advantages of high stretchability,good flexibility,superior durability,which can be used to prepare flexible strain sensors with large working strain and outstanding sensitivity.This review has put forward a comprehensive summary on the fabrication methods,advanced mechanisms and strain sensing abilities of CPC strain sensors reported in recent years,especially the sensors with superior performance.Finally,the structural design,bionic function,integration technology and further application of CPC strain sensors are prospected.
