During the operation of the rice combine harvester,the fuselage tilts due to the tilt and unevenness of the ground affect its maneuverability and operational reliability.Aiming at the problem of leveling due to the ti...During the operation of the rice combine harvester,the fuselage tilts due to the tilt and unevenness of the ground affect its maneuverability and operational reliability.Aiming at the problem of leveling due to the tilt of the field surface,this research developed an innovative dual-parallelogram chassis lifting mechanism for rice harvesters designed a hydraulic system to adjust the chassis height by extending the cylinder.Using Adams simulation software,a detailed model of the lifting chassis was constructed to analyze its performance,revealing a direct correlation between the hydraulic cylinder extension and chassis elevation.Notably,the mechanism could achieve leveling on slopes with inclination angles of up to 7.5°.Comprehensive evaluations of the liftable chassis system were conducted under both static and dynamic conditions.In the static tests,the system exhibited the capacity for comprehensive or unilateral auto-leveling contingent upon the tilt,with leveling times and angular variations confined to 3.6 s and±0.4°,respectively.In dynamic tests conducted on sloped fields and paddy soils,the system reduced post-leveling mean tilt angles and standard deviations remained below 1.2°and 0.6°,respectively.These results demonstrated a substantial improvement in the stability and reliability of the chassis during operations.This research provides valuable insights into the design and optimization of automatic leveling mechanisms and structural innovations for harvester chassis.展开更多
基金Sichuan Science and Technology Program(2022YFG0077)。
文摘During the operation of the rice combine harvester,the fuselage tilts due to the tilt and unevenness of the ground affect its maneuverability and operational reliability.Aiming at the problem of leveling due to the tilt of the field surface,this research developed an innovative dual-parallelogram chassis lifting mechanism for rice harvesters designed a hydraulic system to adjust the chassis height by extending the cylinder.Using Adams simulation software,a detailed model of the lifting chassis was constructed to analyze its performance,revealing a direct correlation between the hydraulic cylinder extension and chassis elevation.Notably,the mechanism could achieve leveling on slopes with inclination angles of up to 7.5°.Comprehensive evaluations of the liftable chassis system were conducted under both static and dynamic conditions.In the static tests,the system exhibited the capacity for comprehensive or unilateral auto-leveling contingent upon the tilt,with leveling times and angular variations confined to 3.6 s and±0.4°,respectively.In dynamic tests conducted on sloped fields and paddy soils,the system reduced post-leveling mean tilt angles and standard deviations remained below 1.2°and 0.6°,respectively.These results demonstrated a substantial improvement in the stability and reliability of the chassis during operations.This research provides valuable insights into the design and optimization of automatic leveling mechanisms and structural innovations for harvester chassis.
文摘为提高红托竹荪干燥品质并获得最佳干燥工艺,采用真空红外干燥(vacuum infrared drying,VID)、气流冲击干燥(air impingement drying,AID)、控湿干燥(moisture control drying,MCD)等不同干燥方式对红托竹荪进行对比研究,以热风干燥(hot air drying,HAD)作为对照组,研究不同干燥方式及温度对红托竹荪干燥品质的影响。试验结果表明不同干燥方式对竹荪宏观品质产生了显著影响,其中MCD可获得最小的色差∆E和收缩率,AID则能够保证较高的复水比;干燥速率方面,MCD在前期能够获得较高的干燥速率,但后期干燥速率会放缓,而AID在整个干燥过程都具有较高的干燥速率,干燥时间较短;在成分保留上,MCD可以保留较高含量的多糖、三萜和黄酮,而采用VID可以有效保护多酚。单位能耗随干燥温度的升高明显降低,不同方式下VID的干燥能耗值整体偏大,MCD的单位能耗最低(18.82 kW·h/kg)。通过主成分分析法,上述干燥方式对红托竹荪综合评分后得到的结果排序为:MCD>AID>VID>HAD,MCD干燥方式中采用60℃相对湿度为40%,保湿时间15min的干燥工艺综合品质较佳,在此加工方式下的红托竹荪综合评分为2.94,该研究可为红托竹荪高品质干燥提供一定参考。
