期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
The use of a ternary metal sulfide loading on carbon fibers as the sulfur host for high performance low-temperature lithium sulfur batteries
1
作者 HE Xin ZUO Huai-yang +4 位作者 XIAO Ru QU Zhuo-yan SUN Zhen-hua WANG Bao Li Feng 《新型炭材料(中英文)》 北大核心 2025年第1期167-177,共11页
The use of lithium-sulfur(Li-S)batteries is limited by sulfur redox reactions involving multi-phase transformations,especially at low-temperatures.To address this issue,we report a material(FCNS@NCFs)consisting of nit... The use of lithium-sulfur(Li-S)batteries is limited by sulfur redox reactions involving multi-phase transformations,especially at low-temperatures.To address this issue,we report a material(FCNS@NCFs)consisting of nitrogen-doped carbon fibers loaded with a ternary metal sulf-ide((Fe,Co,Ni)_(9)S_(8))for use as the sulfur host in Li-S batteries.This materi-al was prepared using transfer blot filter paper as the carbon precursor,thiourea as the source of nitrogen and sulfur,and FeCl_(3)·6H_(2)O,CoCl_(2)·6H_(2)O and NiCl_(2)·6H_(2)O as the metal ion sources.It was synthesized by an impreg-nation method followed by calcination.The nitrogen doping significantly in-creased the conductivity of the host,and the metal sulfides have excellent catalytic activities.Theoretical calculations,and adsorption and deposition experiments show that active sites on the surface of FCNS@NCFs selectively adsorb polysulfides,facilitate rapid adsorption and conversion,prevent cathode passivation and inhib-it the polysulfide shuttling.The FCNS@NCFs used as the sulfur host has excellent electrochemical properties.Its initial dis-charge capacity is 1639.0 mAh g^(−1) at 0.2 C and room temperature,and it remains a capacity of 1255.1 mAh g^(−1) after 100 cycles.At−20~C,it has an initial discharge capacity of 1578.5 mAh g^(−1) at 0.2 C,with a capacity of 867.5 mAh g^(−1) after 100 cycles.Its excellent performance at both ambient and low temperatures suggests a new way to produce high-performance low-temper-ature Li-S batteries. 展开更多
关键词 Lithium sulfur batteries Low temperature Transition metal sulfides Sulfur conversion kinetics
在线阅读 下载PDF
天山雪莲种子萌发研究
2
作者 赵倩 王晓东 +1 位作者 袁晓凡 赵兵 《种子》 CSCD 北大核心 2010年第2期25-29,共5页
研究不同处理方式对天山雪莲种子萌发的影响,并优化种子萌发条件。20℃下采用不同浓度的Ca2+、Mg2+、Zn2+、Cu2+、PEG-4000、GA3分别浸泡天山雪莲种子48h,然后进行发芽试验,测定发芽率、发芽势、根长、发芽指数、活力指数,根据试验结果... 研究不同处理方式对天山雪莲种子萌发的影响,并优化种子萌发条件。20℃下采用不同浓度的Ca2+、Mg2+、Zn2+、Cu2+、PEG-4000、GA3分别浸泡天山雪莲种子48h,然后进行发芽试验,测定发芽率、发芽势、根长、发芽指数、活力指数,根据试验结果优选Ca2+、PEG-4000、GA3进行正交试验。结果:分别经Mg2+、Zn2+、Cu2+浸泡处理后,天山雪莲种子活力无显著提高;20℃时,Ca2+、PEG-4000、GA3浓度分别为20mmol/L、40g/L、200mg/L条件下浸泡种子48h,再进行发芽试验,发现较对照组发芽率提高45.4%,发芽势提高62.5%,根长提高12.5%,发芽指数提高73.9%,活力指数提高68.6%。结论:适宜浓度的Ca2+、PEG-4000、GA3及其复合处理能够显著提高种子性能。 展开更多
关键词 天山雪莲 正交试验 种子萌发 活力
在线阅读 下载PDF
沙门氏菌耐药基因的核酸恒温扩增快速检测
3
作者 赵雪 梁祖源 +4 位作者 张琛 王倬 毛瑞 刘雪莲 杜昱光 《沈阳农业大学学报》 CAS CSCD 北大核心 2021年第5期548-556,共9页
为了解猪源致病性沙门氏菌的耐药状况,建立一种可以快速准确灵敏的确定沙门氏菌耐药表型的检测方法,以满足生产中的实时检测监控及用药指导的需求。所开发的检测方法基于竞争性互补介导核酸恒温扩增(competitive annealing mediated iso... 为了解猪源致病性沙门氏菌的耐药状况,建立一种可以快速准确灵敏的确定沙门氏菌耐药表型的检测方法,以满足生产中的实时检测监控及用药指导的需求。所开发的检测方法基于竞争性互补介导核酸恒温扩增(competitive annealing mediated isothermal amplification,CAMP)与微流控芯片于一体的检测技术,分别以β-内酰胺类耐药基因bla_(TEM-1),四环素类耐药基因tetB,氨基糖苷类耐药基因aadA1,这些基因的保守区域片段为靶序列,应用CAMP引物设计推荐规则,设计特异性CAMP引物,通过条件优化建立一种快速检测沙门氏菌耐药基因的方法,并且对该方法的特异性及灵敏度等方面进行了评估。结果表明:所开发的CAMP检测体系可有效检出沙门氏菌,并检测养殖场所实地采集的沙门氏菌不同菌株中bla_(TEM-1)、tetB、aadA1共3种耐药基因,检测结果与测序结果一致,显示出良好的特异性。并且应用本试验建立的CAMP检测方法,沙门氏菌invA基因检测灵敏度最低限为10拷贝,bla_(TEM-1)基因检测灵敏度最低限为10^(2)拷贝,aadA1基因检测灵敏度最低限为10^(2)拷贝,tetB基因检测灵敏度最低限为10^(3)拷贝。本研究所开发的CAMP检测体系,可快速有效地检测沙门氏菌耐药基因,检测体系可使用实时荧光定量PCR设备进行结果判读,也可以使用实验室水浴等温控设备进行基于颜色变化的裸眼结果判读,并可结合微流控芯片进一步提高反应体系密封性,显著减少了试剂用量,降低了对检测设备的需求,从而节约检测成本,将为养殖现场对沙门氏菌耐药状况的实时监测及用药参考提供便捷有力的技术手段。 展开更多
关键词 沙门氏菌 耐药基因 等温扩增 微流控芯片
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部