In a cloud-native era,the Kubernetes-based workflow engine enables workflow containerized execution through the inherent abilities of Kubernetes.However,when encountering continuous workflow requests and unexpected re...In a cloud-native era,the Kubernetes-based workflow engine enables workflow containerized execution through the inherent abilities of Kubernetes.However,when encountering continuous workflow requests and unexpected resource request spikes,the engine is limited to the current workflow load information for resource allocation,which lacks the agility and predictability of resource allocation,resulting in over and underprovisioning resources.This mechanism seriously hinders workflow execution efficiency and leads to high resource waste.To overcome these drawbacks,we propose an adaptive resource allocation scheme named adaptive resource allocation scheme(ARAS)for the Kubernetes-based workflow engines.Considering potential future workflow task requests within the current task pod’s lifecycle,the ARAS uses a resource scaling strategy to allocate resources in response to high-concurrency workflow scenarios.The ARAS offers resource discovery,resource evaluation,and allocation functionalities and serves as a key component for our tailored workflow engine(KubeAdaptor).By integrating the ARAS into KubeAdaptor for workflow containerized execution,we demonstrate the practical abilities of KubeAdaptor and the advantages of our ARAS.Compared with the baseline algorithm,experimental evaluation under three distinct workflow arrival patterns shows that ARAS gains time-saving of 9.8% to 40.92% in the average total duration of all workflows,time-saving of 26.4% to 79.86% in the average duration of individual workflow,and an increase of 1% to 16% in centrol processing unit(CPU)and memory resource usage rate.展开更多
In order to improve the performance of multi-objective workflow scheduling in cloud system, a multi-swarm multiobjective optimization algorithm(MSMOOA) is proposed to satisfy multiple conflicting objectives. Inspired ...In order to improve the performance of multi-objective workflow scheduling in cloud system, a multi-swarm multiobjective optimization algorithm(MSMOOA) is proposed to satisfy multiple conflicting objectives. Inspired by division of the same species into multiple swarms for different objectives and information sharing among these swarms in nature, each physical machine in the data center is considered a swarm and employs improved multi-objective particle swarm optimization to find out non-dominated solutions with one objective in MSMOOA. The particles in each swarm are divided into two classes and adopt different strategies to evolve cooperatively. One class of particles can communicate with several swarms simultaneously to promote the information sharing among swarms and the other class of particles can only exchange information with the particles located in the same swarm. Furthermore, in order to avoid the influence by the elastic available resources, a manager server is adopted in the cloud data center to collect the available resources for scheduling. The quality of the proposed method with other related approaches is evaluated by using hybrid and parallel workflow applications. The experiment results highlight the better performance of the MSMOOA than that of compared algorithms.展开更多
Data-centric modeling approach for workflow specification and design has received considerable attention from research and development communities.An architecture for a workflow management system named EZFLOWS was out...Data-centric modeling approach for workflow specification and design has received considerable attention from research and development communities.An architecture for a workflow management system named EZFLOWS was outlined.Key components and research issues associated with the development of EZFLOWS were discussed.展开更多
With the vehement development of global competition , Agile Supply Chain (ASC) becomes an effective approach that supports dynamic ent erprise alliance and realizes agile manufacturing, as for the enterprises to cap t...With the vehement development of global competition , Agile Supply Chain (ASC) becomes an effective approach that supports dynamic ent erprise alliance and realizes agile manufacturing, as for the enterprises to cap ture market opportunities rapidly and strengthen their anti-risk ability. As Ag ile Supply Chain System (ASCS) is dynamic and distributed, the realization of it ’s processes needs to be much flexible. Often in Agile Supply Chain System (ASCS ), there are many dynamic tasks, many changes of the processes, and cooperative workflows, which need the workflows able to be adjusted agilely and smoothly, no t much affecting others. This paper will propose a flexible workflow management for achieving the agility and compatibility. At the first of the paper, we will discuss the situation in which Agile Supply C hain System is applied, and then we will elaborate the characteristics of Agile Supply Chain System. So with that, the shortcomings of the process managements t hat are, at present, used in Supply Chain Systems will be displayed clearly. The n, the proposal will be given in the paper, to resolve the problems in the prese nt process management in ASCS. We will see supply chain systems implemented mult i-agent-based technology to adapt to the dynamic environment, however in many systems, coordination of the workflows is executed by the explicit messages comm unicated between the agents. This will lead to a tightly coupled system. To over come it, the paper suggests the workflow management in agent-based ASCS using t he Events-Triggering mechanism, instead of the explicit messages. We create Eve nts-Triggering contents and rules, having push-pull mechanism, event-state se t and triggering-conditions, and store them in the distributed database subject ed to the corresponding agents. Adjusting the Events-Triggering data will be us ed to adapt to the dynamic tasks and the changes of processes. In sum, we will p resent the methods of process modeling, the system structure, and the executing -mechanism of the flexible workflow management we propose in the paper. Also, t he paper outlines several exception-handling policies for the flexible workflow management, in succession. And at the final of the paper, we discuss the realiz ation of the flexible workflow management in Agile Supply Chain System. The flex ible workflow management will be implemented using CORBA services and Java techn ology for the distributed systems. CORBA is chosen as the specification of distr ibuted electronic data exchange, and Java as the construction tool of the system . The framework of the flexible workflow management constructed on them is showe d in the paper.展开更多
Nowadays an increasing number of workflow products and research prototypes begin to adopt XML for representing workflow models owing to its easy use and well understanding for people and machines. However, most of wor...Nowadays an increasing number of workflow products and research prototypes begin to adopt XML for representing workflow models owing to its easy use and well understanding for people and machines. However, most of workflow products and research prototypes provide the few supports for the verification of XML-based workflow model, such as free-deadlock properties, which is essential to successful application of workflow technology. In this paper, we tackle this problem by mapping the XML-based workflow model into Petri-net, a kind of well-known formalism for modeling, analyzing and verifying system. As a result, the XML-based workflow model can be automatically verified with the help of general Petri-net tools, such as DANAMICS. The presented approach not only enables end users to represent workflow model with XML-based modeling language, but also the correctness of model can be ensured, thus satisfying the needs of business processes.展开更多
Developers still need design workflow system according to users＇ specific needs, though workflow management coalition standardized the five kinds of abstract interfaces in workflow reference model. Specific business ...Developers still need design workflow system according to users＇ specific needs, though workflow management coalition standardized the five kinds of abstract interfaces in workflow reference model. Specific business process characteristics are still supported by specific workflow system. A set of common functionalities of workflow engine are abstracted from business component, so the reusability of business component is extended into workflow engine and composition method is proposed. Needs of different business requirements and characteristics are met by reusing the workflow engine.展开更多
Based on the methods of acquaintance cache and group-based intelligent forwarding of service recommendations,a novel group-based active service(GAS) protocol for migrating workflows was proposed.This protocol did not ...Based on the methods of acquaintance cache and group-based intelligent forwarding of service recommendations,a novel group-based active service(GAS) protocol for migrating workflows was proposed.This protocol did not require service requesters to discover services or resources.The semantic acquaintance knowledge representation was exploited to describe service groups and this semantic information was used to recommend service to respective clients.The experimental results show that the new protocol proposed offers better performance than other protocols in terms of first-response-time,success-scope and ratio of success-packet-number to total-packet-number.When the number of service request packet is 20,the first-response-time of GAS protocol is only 5.1 s,which is significantly lower than that of other protocols.The success-scope of GAS protocol is 49.1%,showing that GAS protocol can effectively improve the reliability of mobile transactions.And the ratio of success-packet-number to total-packet-number of GAS protocol is up to 0.080,which is obviously higher than that of other protocols.展开更多
基金supported by the National Natural Science Foundation of China(61873030,62002019).
文摘In a cloud-native era,the Kubernetes-based workflow engine enables workflow containerized execution through the inherent abilities of Kubernetes.However,when encountering continuous workflow requests and unexpected resource request spikes,the engine is limited to the current workflow load information for resource allocation,which lacks the agility and predictability of resource allocation,resulting in over and underprovisioning resources.This mechanism seriously hinders workflow execution efficiency and leads to high resource waste.To overcome these drawbacks,we propose an adaptive resource allocation scheme named adaptive resource allocation scheme(ARAS)for the Kubernetes-based workflow engines.Considering potential future workflow task requests within the current task pod’s lifecycle,the ARAS uses a resource scaling strategy to allocate resources in response to high-concurrency workflow scenarios.The ARAS offers resource discovery,resource evaluation,and allocation functionalities and serves as a key component for our tailored workflow engine(KubeAdaptor).By integrating the ARAS into KubeAdaptor for workflow containerized execution,we demonstrate the practical abilities of KubeAdaptor and the advantages of our ARAS.Compared with the baseline algorithm,experimental evaluation under three distinct workflow arrival patterns shows that ARAS gains time-saving of 9.8% to 40.92% in the average total duration of all workflows,time-saving of 26.4% to 79.86% in the average duration of individual workflow,and an increase of 1% to 16% in centrol processing unit(CPU)and memory resource usage rate.
基金Project(61473078)supported by the National Natural Science Foundation of ChinaProject(2015-2019)supported by the Program for Changjiang Scholars from the Ministry of Education,China+1 种基金Project(16510711100)supported by International Collaborative Project of the Shanghai Committee of Science and Technology,ChinaProject(KJ2017A418)supported by Anhui University Science Research,China
文摘In order to improve the performance of multi-objective workflow scheduling in cloud system, a multi-swarm multiobjective optimization algorithm(MSMOOA) is proposed to satisfy multiple conflicting objectives. Inspired by division of the same species into multiple swarms for different objectives and information sharing among these swarms in nature, each physical machine in the data center is considered a swarm and employs improved multi-objective particle swarm optimization to find out non-dominated solutions with one objective in MSMOOA. The particles in each swarm are divided into two classes and adopt different strategies to evolve cooperatively. One class of particles can communicate with several swarms simultaneously to promote the information sharing among swarms and the other class of particles can only exchange information with the particles located in the same swarm. Furthermore, in order to avoid the influence by the elastic available resources, a manager server is adopted in the cloud data center to collect the available resources for scheduling. The quality of the proposed method with other related approaches is evaluated by using hybrid and parallel workflow applications. The experiment results highlight the better performance of the MSMOOA than that of compared algorithms.
基金Project supported by the NSF(No.IIS-0812578),the Grant from IBM to UCSB,and the Grant from China Scholarship Council
文摘Data-centric modeling approach for workflow specification and design has received considerable attention from research and development communities.An architecture for a workflow management system named EZFLOWS was outlined.Key components and research issues associated with the development of EZFLOWS were discussed.
文摘With the vehement development of global competition , Agile Supply Chain (ASC) becomes an effective approach that supports dynamic ent erprise alliance and realizes agile manufacturing, as for the enterprises to cap ture market opportunities rapidly and strengthen their anti-risk ability. As Ag ile Supply Chain System (ASCS) is dynamic and distributed, the realization of it ’s processes needs to be much flexible. Often in Agile Supply Chain System (ASCS ), there are many dynamic tasks, many changes of the processes, and cooperative workflows, which need the workflows able to be adjusted agilely and smoothly, no t much affecting others. This paper will propose a flexible workflow management for achieving the agility and compatibility. At the first of the paper, we will discuss the situation in which Agile Supply C hain System is applied, and then we will elaborate the characteristics of Agile Supply Chain System. So with that, the shortcomings of the process managements t hat are, at present, used in Supply Chain Systems will be displayed clearly. The n, the proposal will be given in the paper, to resolve the problems in the prese nt process management in ASCS. We will see supply chain systems implemented mult i-agent-based technology to adapt to the dynamic environment, however in many systems, coordination of the workflows is executed by the explicit messages comm unicated between the agents. This will lead to a tightly coupled system. To over come it, the paper suggests the workflow management in agent-based ASCS using t he Events-Triggering mechanism, instead of the explicit messages. We create Eve nts-Triggering contents and rules, having push-pull mechanism, event-state se t and triggering-conditions, and store them in the distributed database subject ed to the corresponding agents. Adjusting the Events-Triggering data will be us ed to adapt to the dynamic tasks and the changes of processes. In sum, we will p resent the methods of process modeling, the system structure, and the executing -mechanism of the flexible workflow management we propose in the paper. Also, t he paper outlines several exception-handling policies for the flexible workflow management, in succession. And at the final of the paper, we discuss the realiz ation of the flexible workflow management in Agile Supply Chain System. The flex ible workflow management will be implemented using CORBA services and Java techn ology for the distributed systems. CORBA is chosen as the specification of distr ibuted electronic data exchange, and Java as the construction tool of the system . The framework of the flexible workflow management constructed on them is showe d in the paper.
文摘Nowadays an increasing number of workflow products and research prototypes begin to adopt XML for representing workflow models owing to its easy use and well understanding for people and machines. However, most of workflow products and research prototypes provide the few supports for the verification of XML-based workflow model, such as free-deadlock properties, which is essential to successful application of workflow technology. In this paper, we tackle this problem by mapping the XML-based workflow model into Petri-net, a kind of well-known formalism for modeling, analyzing and verifying system. As a result, the XML-based workflow model can be automatically verified with the help of general Petri-net tools, such as DANAMICS. The presented approach not only enables end users to represent workflow model with XML-based modeling language, but also the correctness of model can be ensured, thus satisfying the needs of business processes.
文摘Developers still need design workflow system according to users＇ specific needs, though workflow management coalition standardized the five kinds of abstract interfaces in workflow reference model. Specific business process characteristics are still supported by specific workflow system. A set of common functionalities of workflow engine are abstracted from business component, so the reusability of business component is extended into workflow engine and composition method is proposed. Needs of different business requirements and characteristics are met by reusing the workflow engine.
基金Project(60573169) supported by the National Natural Science Foundation of China
文摘Based on the methods of acquaintance cache and group-based intelligent forwarding of service recommendations,a novel group-based active service(GAS) protocol for migrating workflows was proposed.This protocol did not require service requesters to discover services or resources.The semantic acquaintance knowledge representation was exploited to describe service groups and this semantic information was used to recommend service to respective clients.The experimental results show that the new protocol proposed offers better performance than other protocols in terms of first-response-time,success-scope and ratio of success-packet-number to total-packet-number.When the number of service request packet is 20,the first-response-time of GAS protocol is only 5.1 s,which is significantly lower than that of other protocols.The success-scope of GAS protocol is 49.1%,showing that GAS protocol can effectively improve the reliability of mobile transactions.And the ratio of success-packet-number to total-packet-number of GAS protocol is up to 0.080,which is obviously higher than that of other protocols.
