Using ANSYS software, we developed a modeling program for several kinds of wire ropes with metal cores and built a geometric model for the 6×19 IWS wire rope. Through proper grid partitioning, a finite element mo...Using ANSYS software, we developed a modeling program for several kinds of wire ropes with metal cores and built a geometric model for the 6×19 IWS wire rope. Through proper grid partitioning, a finite element model for calculating the deforma-tion of wire rope was obtained. Completely constraining one end of the wire rope and applying an axial force to the other end, we established the boundary conditions for solving the model. In addition, we numerically simulated the stress and deformation of the wire, obtaining the deformation distribution of each wire within the wire rope under different laying directions. At the end, a tensile test of the 6×19 IWS wire rope was carried out and the results of simulation and experiment compared.展开更多
In order to obtain the exact friction coefficient between lining and wire rope, the tension of wire rope is studied as a factor which affects this coefficient. A mechanical model of a wire rope subjected to axial load...In order to obtain the exact friction coefficient between lining and wire rope, the tension of wire rope is studied as a factor which affects this coefficient. A mechanical model of a wire rope subjected to axial load was established to determine the torque of the wire rope. The contact motion between lining and wire rope was regarded as a screw rotation and the axial force of the lining resulting from the torque of the wire rope was analyzed. Theoretical formulas relating tension of the wire rope and the friction coefficient was obtained. Experiments between lining and wire rope with low sliding speed were carried out with friction tester made by us. Experimental results show that increment of the friction coefficient is proportional to that of the tension of the wire rope with a low sliding speed. The experimental results agree with the theoretical calculation; the errors are less than 6%, which oroves the validity of the theoretical model.展开更多
Wire ropes,employed extensively in coal mine hoists and transportation systems are subject to damage due to wear,corrosion and fatigue.The extent of damage and the carrying capacity of ropes are closely related to the...Wire ropes,employed extensively in coal mine hoists and transportation systems are subject to damage due to wear,corrosion and fatigue.The extent of damage and the carrying capacity of ropes are closely related to the sense of safety by staff and equipments.Magnetic flux leakage detection method(MFL),as an effective method,is these days widely used in detection of broken strands of wire ropes.In order to improve the accuracy of detection of flaws in wire ropes by magnetic flux leakage(MFL),the effect of the distance between a sensor and the surface of a wire rope(i.e.,lift-off) on detection by magnetic flux leakage was in-vestigated.An analysis of the main principles for the choice of lift-off is described by us and a new method that improves the structure of the detector is proposed from the point of view of the design of a magnetic circuit,to restrain the impact of fluctuations of sensor lift-off.The effect of this kind of method is validated by simulation and computation.The results show that the detection sensitivity is markedly increased by this method.Furthermore,the signal-to-noise ratio(SNR) can be increased by over 28%.This method will lend itself to offer reliable scientific information to optimize the structure of excitation devices and improve the accuracy of MFL detection.展开更多
The principles of X-ray Non-destructive testing (NDT) for steel wire ropes buried in conveyer belt is described in the paper. The mathematical model for calculating the effective cross section of wire ropes has been d...The principles of X-ray Non-destructive testing (NDT) for steel wire ropes buried in conveyer belt is described in the paper. The mathematical model for calculating the effective cross section of wire ropes has been developed. The test data on steel wire rope samples of various types are presented,which have been compared with the National Standard. And this calculation model for the effective cross section is very important to the prediction system for transverse failure of conveyer belt.展开更多
A wire rope defects detection method based on permanent magnet excitation is proposed.A detection system,mainly composed of permanent magnet excitation,distance detection,multi-sensor magnetic flux leakage signal acqu...A wire rope defects detection method based on permanent magnet excitation is proposed.A detection system,mainly composed of permanent magnet excitation,distance detection,multi-sensor magnetic flux leakage signal acquisition and data analysis device,is set up.According to the different characteristics of the multi-sensor magnetic flux leakage signal,the localized fault(LF)and loss of metallic cross-sectional area(LMA)signal is separated,and then the two defects can be detected.The experiments show that the method can effectively detect the two defects when they appear simultaneously on the wire rope.展开更多
基金Project 07KJB430116 supported by the Natural Science Foundation of High University in Jiangsu Province
文摘Using ANSYS software, we developed a modeling program for several kinds of wire ropes with metal cores and built a geometric model for the 6×19 IWS wire rope. Through proper grid partitioning, a finite element model for calculating the deforma-tion of wire rope was obtained. Completely constraining one end of the wire rope and applying an axial force to the other end, we established the boundary conditions for solving the model. In addition, we numerically simulated the stress and deformation of the wire, obtaining the deformation distribution of each wire within the wire rope under different laying directions. At the end, a tensile test of the 6×19 IWS wire rope was carried out and the results of simulation and experiment compared.
基金Projects 20060290505 supported by the Research Fund for the Doctoral Program of Higher EducationNCET-04-0488 by the New Century Excellent Talent Technological Project of Ministry of Education of China.
文摘In order to obtain the exact friction coefficient between lining and wire rope, the tension of wire rope is studied as a factor which affects this coefficient. A mechanical model of a wire rope subjected to axial load was established to determine the torque of the wire rope. The contact motion between lining and wire rope was regarded as a screw rotation and the axial force of the lining resulting from the torque of the wire rope was analyzed. Theoretical formulas relating tension of the wire rope and the friction coefficient was obtained. Experiments between lining and wire rope with low sliding speed were carried out with friction tester made by us. Experimental results show that increment of the friction coefficient is proportional to that of the tension of the wire rope with a low sliding speed. The experimental results agree with the theoretical calculation; the errors are less than 6%, which oroves the validity of the theoretical model.
文摘Wire ropes,employed extensively in coal mine hoists and transportation systems are subject to damage due to wear,corrosion and fatigue.The extent of damage and the carrying capacity of ropes are closely related to the sense of safety by staff and equipments.Magnetic flux leakage detection method(MFL),as an effective method,is these days widely used in detection of broken strands of wire ropes.In order to improve the accuracy of detection of flaws in wire ropes by magnetic flux leakage(MFL),the effect of the distance between a sensor and the surface of a wire rope(i.e.,lift-off) on detection by magnetic flux leakage was in-vestigated.An analysis of the main principles for the choice of lift-off is described by us and a new method that improves the structure of the detector is proposed from the point of view of the design of a magnetic circuit,to restrain the impact of fluctuations of sensor lift-off.The effect of this kind of method is validated by simulation and computation.The results show that the detection sensitivity is markedly increased by this method.Furthermore,the signal-to-noise ratio(SNR) can be increased by over 28%.This method will lend itself to offer reliable scientific information to optimize the structure of excitation devices and improve the accuracy of MFL detection.
文摘The principles of X-ray Non-destructive testing (NDT) for steel wire ropes buried in conveyer belt is described in the paper. The mathematical model for calculating the effective cross section of wire ropes has been developed. The test data on steel wire rope samples of various types are presented,which have been compared with the National Standard. And this calculation model for the effective cross section is very important to the prediction system for transverse failure of conveyer belt.
文摘A wire rope defects detection method based on permanent magnet excitation is proposed.A detection system,mainly composed of permanent magnet excitation,distance detection,multi-sensor magnetic flux leakage signal acquisition and data analysis device,is set up.According to the different characteristics of the multi-sensor magnetic flux leakage signal,the localized fault(LF)and loss of metallic cross-sectional area(LMA)signal is separated,and then the two defects can be detected.The experiments show that the method can effectively detect the two defects when they appear simultaneously on the wire rope.
