We demonstrate that power recycling is feasible by using a semi-transparent stripped Al electrode as interconnecting layer to merge a white organic light-emitting devices(WOLED) and an organic photovoltaic(OPV) cell.T...We demonstrate that power recycling is feasible by using a semi-transparent stripped Al electrode as interconnecting layer to merge a white organic light-emitting devices(WOLED) and an organic photovoltaic(OPV) cell.The device is called a PVOLED.It has a glass / ITO / CuPc / m-MTDATA ∶ V 2 O 5 / NPB / CBP ∶ FIrpic ∶ DCJTB / BPhen / LiF / Al / P3HT∶ PCBM / V 2 O 5 / Al structure.The power recycling efficiency of 10.133% is achieved under the WOLED of PVOLED operated at 9 V and at a brightness of 2 110 cd / m 2,when the conversion efficiency of OPV is 2.3%.We have found that the power recycling efficiency is decreased under high brightness and high applied voltage due to an increase input power of WOLED.High efficiency(18.3 cd / A) and high contrast ratio(9.3) were obtained at the device operated at 2 500 cd / m 2 under an ambient illumination of 24 000 lx.Reasonable white light emission with Commission Internationale De L'Eclairage(CIE) color coordinates of(0.32,0.44) at 20 mA / cm 2 and slight color shift occurred in spite of a high current density of 50 mA / cm 2.The proposed PVOLED is highly promising for use in outdoors display applications.展开更多
Abstract:Hybrid inorganic/organic white organic light emitting diodes(hybrid-WOLEDs)are fabricated by combi-ning the blue phosphorescent organic light emitting diodes(PHOLEDs)with red Sr2SiO4:Eu3+phosphor spin coateda...Abstract:Hybrid inorganic/organic white organic light emitting diodes(hybrid-WOLEDs)are fabricated by combi-ning the blue phosphorescent organic light emitting diodes(PHOLEDs)with red Sr2SiO4:Eu3+phosphor spin coatedas a color conversion layer(CCL)over the other side of glass substrate on the devices.The basic configuration of thePHOLEDs consists a host material,N,N'-dicarbazolyl-3,5-benzene(mCP)which doped with a blue phosphorescentiridium complexes iridium(Ⅲ)bis[(4,6-di-fluorophenyl)-pyridinato-N-C2'](FIrpic)to produce high efficient blueorganic light emitting diodes.The hybrid-WOLED shows maximum luminous efficiency of 22.1 cd/A,maximumpower efficiency of 11.26 lm/W,external quantum efficiency of 10.2%and CIE coordinates of(0.32,0.34).Mo-reover,the output spectra and CIE coordinates of the hybrid-WOLED have a small shift in different driving currentdensity,which demonstrate good color stability.展开更多
有机发光二极管(Organic light-emitting diodes,OLEDs)作为照明和显示领域极其具有竞争力的技术,近年来备受关注。实现超简单、高效率、低滚降的白光OLEDs,对有机发光层材料的选择至关重要。杂化局部和电荷转移(Hybridized local and c...有机发光二极管(Organic light-emitting diodes,OLEDs)作为照明和显示领域极其具有竞争力的技术,近年来备受关注。实现超简单、高效率、低滚降的白光OLEDs,对有机发光层材料的选择至关重要。杂化局部和电荷转移(Hybridized local and charge transfer,HLCT)材料的“热激子”通道可以将高能三线态激子窜跃至单线态,实现理论上100%的激子利用率,快速的反向系间窜跃可有效抑制三线态激子猝灭,从而降低器件效率滚降。基于此,本文首先通过电荷平衡策略优化器件结构,制备了基于HLCT材料pCzAnN的高效蓝光OLED。在此基础上,以pCzAnN作为传统荧光材料的敏化主体,通过不完全能量传递策略,实现了双色及三色白光OLEDs制备。制备的白光OLEDs最高显色指数达到90,最大外量子效率达到8.76%,且展现出较低效率滚降及良好的光谱稳定性。本研究对开发简单、高效率、低滚降白光OLEDs具有指导意义。展开更多
采用真空热蒸镀方法以4,4′-bis(carbazol-9-yl)biphenyl(CBP)为主体材料、以bis[2-(4-tert-butylphenyl)benzothiazolato-N,C2′]iridium(acetylacetonate)[(t-bt)2Ir(acac)]磷光染料为掺杂剂构成黄色发光层,制备了高效白光的有机电致...采用真空热蒸镀方法以4,4′-bis(carbazol-9-yl)biphenyl(CBP)为主体材料、以bis[2-(4-tert-butylphenyl)benzothiazolato-N,C2′]iridium(acetylacetonate)[(t-bt)2Ir(acac)]磷光染料为掺杂剂构成黄色发光层,制备了高效白光的有机电致发光器件(OLEDs).OLEDs的器件结构为indium tin oxide(ITO)/N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine(NPB)/CBP:(t-bt)2Ir(acac)/NPB/2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline(BCP)/8-hydroxyquinoline aluminum(Alq3)/Mg∶Ag,从ITO阳极开始的第一层NPB为空穴传输层,第二层超薄的NPB为蓝色发光层,BCP为空穴阻挡层和激子阻挡层,Alq3为电子传输层.结果表明,器件电压在3V启亮,在16.5V时,器件的最高亮度达到15460cd·m-2;在4V时,器件达到最大流明效率为7.5lm·W-1,器件启亮后所发出的白光光谱在低电压时随电压变化有稍微的移动,但是都在白光范围内变化.在电压达到8V后Commission Internationale de l′Eclairage(国际照明委员会)(CIE)色坐标为(0.33,0.32),并且光谱及色坐标稳定,不随电压变化而改变,与最佳的白光坐标(0.33,0.33)几乎重合.同时,从机理上解释了光谱移动和效率衰减的原因,并探讨了载流子陷阱和能量传递的关系.展开更多
基金Project supported by NSC(98-2221-E-214-003-MY3 and ISU99-01-06)
文摘We demonstrate that power recycling is feasible by using a semi-transparent stripped Al electrode as interconnecting layer to merge a white organic light-emitting devices(WOLED) and an organic photovoltaic(OPV) cell.The device is called a PVOLED.It has a glass / ITO / CuPc / m-MTDATA ∶ V 2 O 5 / NPB / CBP ∶ FIrpic ∶ DCJTB / BPhen / LiF / Al / P3HT∶ PCBM / V 2 O 5 / Al structure.The power recycling efficiency of 10.133% is achieved under the WOLED of PVOLED operated at 9 V and at a brightness of 2 110 cd / m 2,when the conversion efficiency of OPV is 2.3%.We have found that the power recycling efficiency is decreased under high brightness and high applied voltage due to an increase input power of WOLED.High efficiency(18.3 cd / A) and high contrast ratio(9.3) were obtained at the device operated at 2 500 cd / m 2 under an ambient illumination of 24 000 lx.Reasonable white light emission with Commission Internationale De L'Eclairage(CIE) color coordinates of(0.32,0.44) at 20 mA / cm 2 and slight color shift occurred in spite of a high current density of 50 mA / cm 2.The proposed PVOLED is highly promising for use in outdoors display applications.
基金Project supported by the National Science Council of the Republic of China(101-2221-E-214-016)the financial supporitng of ISU99-01-06the MANALAB at ISU,Taiwan
文摘Abstract:Hybrid inorganic/organic white organic light emitting diodes(hybrid-WOLEDs)are fabricated by combi-ning the blue phosphorescent organic light emitting diodes(PHOLEDs)with red Sr2SiO4:Eu3+phosphor spin coatedas a color conversion layer(CCL)over the other side of glass substrate on the devices.The basic configuration of thePHOLEDs consists a host material,N,N'-dicarbazolyl-3,5-benzene(mCP)which doped with a blue phosphorescentiridium complexes iridium(Ⅲ)bis[(4,6-di-fluorophenyl)-pyridinato-N-C2'](FIrpic)to produce high efficient blueorganic light emitting diodes.The hybrid-WOLED shows maximum luminous efficiency of 22.1 cd/A,maximumpower efficiency of 11.26 lm/W,external quantum efficiency of 10.2%and CIE coordinates of(0.32,0.34).Mo-reover,the output spectra and CIE coordinates of the hybrid-WOLED have a small shift in different driving currentdensity,which demonstrate good color stability.
文摘有机发光二极管(Organic light-emitting diodes,OLEDs)作为照明和显示领域极其具有竞争力的技术,近年来备受关注。实现超简单、高效率、低滚降的白光OLEDs,对有机发光层材料的选择至关重要。杂化局部和电荷转移(Hybridized local and charge transfer,HLCT)材料的“热激子”通道可以将高能三线态激子窜跃至单线态,实现理论上100%的激子利用率,快速的反向系间窜跃可有效抑制三线态激子猝灭,从而降低器件效率滚降。基于此,本文首先通过电荷平衡策略优化器件结构,制备了基于HLCT材料pCzAnN的高效蓝光OLED。在此基础上,以pCzAnN作为传统荧光材料的敏化主体,通过不完全能量传递策略,实现了双色及三色白光OLEDs制备。制备的白光OLEDs最高显色指数达到90,最大外量子效率达到8.76%,且展现出较低效率滚降及良好的光谱稳定性。本研究对开发简单、高效率、低滚降白光OLEDs具有指导意义。
文摘采用真空热蒸镀方法以4,4′-bis(carbazol-9-yl)biphenyl(CBP)为主体材料、以bis[2-(4-tert-butylphenyl)benzothiazolato-N,C2′]iridium(acetylacetonate)[(t-bt)2Ir(acac)]磷光染料为掺杂剂构成黄色发光层,制备了高效白光的有机电致发光器件(OLEDs).OLEDs的器件结构为indium tin oxide(ITO)/N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine(NPB)/CBP:(t-bt)2Ir(acac)/NPB/2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline(BCP)/8-hydroxyquinoline aluminum(Alq3)/Mg∶Ag,从ITO阳极开始的第一层NPB为空穴传输层,第二层超薄的NPB为蓝色发光层,BCP为空穴阻挡层和激子阻挡层,Alq3为电子传输层.结果表明,器件电压在3V启亮,在16.5V时,器件的最高亮度达到15460cd·m-2;在4V时,器件达到最大流明效率为7.5lm·W-1,器件启亮后所发出的白光光谱在低电压时随电压变化有稍微的移动,但是都在白光范围内变化.在电压达到8V后Commission Internationale de l′Eclairage(国际照明委员会)(CIE)色坐标为(0.33,0.32),并且光谱及色坐标稳定,不随电压变化而改变,与最佳的白光坐标(0.33,0.33)几乎重合.同时,从机理上解释了光谱移动和效率衰减的原因,并探讨了载流子陷阱和能量传递的关系.
