Thickness measurement plays an important role in the monitoring of pipeline corrosion damage. However, the requirement for prior knowledge of the shear wave velocity in the pipeline material for popular ultrasonic thi...Thickness measurement plays an important role in the monitoring of pipeline corrosion damage. However, the requirement for prior knowledge of the shear wave velocity in the pipeline material for popular ultrasonic thickness measurement limits its widespread application. This paper proposes a method that utilizes cylindrical shear horizontal(SH) guided waves to estimate pipeline thickness without prior knowledge of shear wave velocity. The inversion formulas are derived from the dispersion of higher-order modes with the high-frequency approximation. The waveform of the example problems is simulated using the real-axis integral method. The data points on the dispersion curves are processed in the frequency domain using the wave-number method. These extracted data are then substituted into the derived formulas. The results verify that employing higher-order SH guided waves for the evaluation of thickness and shear wave velocity yields less than1% error. This method can be applied to both metallic and non-metallic pipelines, thus opening new possibilities for health monitoring of pipeline structures.展开更多
Carbon fiber-reinforced polymer(CFRP)is widely used in aerospace applications.This kind of material may face the threat of high-velocity impact in the process of dedicated service,and the relevant research mainly cons...Carbon fiber-reinforced polymer(CFRP)is widely used in aerospace applications.This kind of material may face the threat of high-velocity impact in the process of dedicated service,and the relevant research mainly considers the impact resistance of the material,and lacks the high-velocity impact damage monitoring research of CFRP.To solve this problem,a real high-velocity impact damage experiment and structural health monitoring(SHM)method of CFRP plate based on piezoelectric guided wave is proposed.The results show that CFRP has obvious perforation damage and fiber breakage when high-velocity impact occurs.It is also proved that guided wave SHM technology can be effectively used in the monitoring of such damage,and the damage can be reflected by quantifying the signal changes and damage index(DI).It provides a reference for further research on guided wave structure monitoring of high/hyper-velocity impact damage of CFRP.展开更多
The effect of second-harmonic generation （SHG） by primary （fundamental） circumferential guided wave （CGW） propagation is investigated from a numerical standpoint. To enable that the second harmonic of the primar...The effect of second-harmonic generation （SHG） by primary （fundamental） circumferential guided wave （CGW） propagation is investigated from a numerical standpoint. To enable that the second harmonic of the primary CGW mode can accumulate along the circumferential direction, an appropriate mode pair of primary and double frequency CGWs is chosen. Finite element simulations and evaluations of nonlinear CGW propagation are analyzed for the selected CGW mode pair. The numerical simulations performed directly demonstrate that the response of SHG is completely generated by the desired primary CGW mode that satisfies the condition of phase velocity matching at a specific driving frequency, and that the second harmonic of the primary CGW mode does have a cumulative effect with circumferential angles. The numerical perspective obtained yields an insight into the complicated physical process of SHG of primary CGW propagation unavailable previously.展开更多
Using periodic permanent magnet(PPM)electromagnetic acoustic transducers(EMATs),different shear horizontal(SH)guided wave modes can form simultaneously in some situations,which can interfere with the inspection.The ma...Using periodic permanent magnet(PPM)electromagnetic acoustic transducers(EMATs),different shear horizontal(SH)guided wave modes can form simultaneously in some situations,which can interfere with the inspection.The main cause of this phenomenon(typically named multiple modes)is related to the frequency bandwidth of excitation signals and the transducer spatial bandwidth.Simply narrowing the frequency bandwidth cannot effectively limit the number of different SH modes.Previous researches showed that unnecessary SH wave modes can be eliminated by using dual EMATs.However,in practical applications,it is more convenient to change the excitation frequency than to use dual EMATs.In this paper,the stress boundary conditions of the PPM-EMAT are analyzed,the analytical expression of SH guided wave is established,and the magnitude of SH guided wave mode under continuous tone and tone-burst input is obtained.A method to generate a single SH mode by re-selecting an operating point is proposed.Furthermore,the influence of the frequency bandwidth of the tone-burst signal is analyzed.Finally,a single SH mode excitation is achieved with tone-burst input.展开更多
The property of acoustic guided waves generated in a fluid-filled borehole surrounded by a non-Newtonian （Maxwell） fluid-saturated porous formation with a permeable wall is investigated. The influence of non-Newtoni...The property of acoustic guided waves generated in a fluid-filled borehole surrounded by a non-Newtonian （Maxwell） fluid-saturated porous formation with a permeable wall is investigated. The influence of non-Newtonian effects on acoustic guided waves such as Stoneley waves, pseudo-Rayleigh waves, flexural waves, and screw waves propagations in a fluid-filled borehole is demonstrated based on the generalized Biot-Tsiklauri model by calculating their velocity dispersion and attenuation coefficients. The corresponding acoustic waveforms illustrate their properties in time domain. The results are also compared with those based on generalized Biot＇s theory. The results show that the influence of non-Newtonian effect on acoustic guided wave, especially on the attenuation coefficient of guided wave propagation in borehole is noticeable.展开更多
The experimental observation of cumulative second-harmonic generation of the primary circumferential guided wave propagation is reported. A pair of wedge transducers is used to generate the primary circumferential gui...The experimental observation of cumulative second-harmonic generation of the primary circumferential guided wave propagation is reported. A pair of wedge transducers is used to generate the primary circumferential guided wave desired and to detect its fundamental-frequency and second-harmonic amplitudes on the outside surface of the circular tube. The amplitudes of the fundamental waves and the second harmonics of the circumferential guided wave propagation are measured for different separations between the two wedge transducers. At the driving frequency where the primary and the double-frequency circumferential guided waves have the same linear phase velocities, the clear second-harmonic signals can be observed. The quantitative relationships between the second-harmonic amplitudes and circumferential angle are analyzed. It is experimentally verified that the second harmonics of primary circumferential guided waves do have a cumulative growth effect with the circumferential angle.展开更多
Considering the high sensitivity of the nonlinear ultrasonic measurement technique and great advantages of the guided wave testing method, the use of nonlinear ultrasonic guided waves provides a promising means for ev...Considering the high sensitivity of the nonlinear ultrasonic measurement technique and great advantages of the guided wave testing method, the use of nonlinear ultrasonic guided waves provides a promising means for evaluating and characterizing the hidden and/or inaccessible damage/degradation in solid media. Increasing attention on the development of the testing method based on nonlinear ultrasonic guided waves is largely attributed to the theoretical advances of nonlinear guided waves propagation in solid media. One of the typical acoustic nonlinear responses is the generation of second harmonics that can be used to effectively evaluate damage/degradation in materials/structures. In this paper, the theoretical progress of second-harmonic generation（SHG） of ultrasonic guided wave propagation in solid media is reviewed. The advances and developments of theoretical investigations on the effect of SHG of ultrasonic guided wave propagation in different structures are addressed. Some obscure understandings and the ideas in dispute are also discussed.展开更多
Ultrasonic guided waves(UGWs),which propagate throughout the entire thickness of cortical bone,are attractive for the early diagnosis of osteoporosis.However,this is challenging due to the impact of soft tissue and th...Ultrasonic guided waves(UGWs),which propagate throughout the entire thickness of cortical bone,are attractive for the early diagnosis of osteoporosis.However,this is challenging due to the impact of soft tissue and the inherent difficulties related to multiparametric inversion of cortical bone quality factors,such as cortical thickness and bulk wave velocity.Therefore,in this research,a UGW-based multi-parameter inversion algorithm is developed to predict strength-related factors.In simulation,a free plate(cortical bone)and a bilayer plate(soft tissue and cortical bone)are used to validate the proposed method.The inversed cortical thickness(CTh),longitudinal velocity(V_(L))and transverse velocity(V_(T))are in accordance with the true values.Then four bovine cortical bone plates were used in in vitro experiments.Compared with the reference values,the relative errors for cortical thickness were 3.96%,0.83%,2.87%,and 4.25%,respectively.In the in vivo measurements,UGWs are collected from the tibias of 10 volunteers.The theoretical dispersion curves depicted by the estimated parameters(V_(T),V_(L),CTh)match well with the extracted experimental ones.In comparison with dual-energy x-ray absorptiometry,our results show that the estimated transverse velocity and cortical thickness are highly sensitive to osteoporosis.Therefore,these two parameters(CTh and V_(T))of long bones have potential to be used for diagnosis of bone status in clinical applications.展开更多
We investigate the three-dimensional （3D） scattering problem of an incident plane shear horizontal wave by a partly through-thickness hole in an isotropic plate, in which the Lamb wave modes are also included due to...We investigate the three-dimensional （3D） scattering problem of an incident plane shear horizontal wave by a partly through-thickness hole in an isotropic plate, in which the Lamb wave modes are also included due to the mode conversions by the scattering obstacle in the 3D problem. An analytical model is presented such that the wave fields are expanded in all of propagating and evanescent SH modes and Lamb modes, and the scattered far-fields of three fundamental guided wave modes are analyzed numerically for different sizes of the holes and frequencies. The numerical results are verified by comparing with those obtained by using the approximate Poisson/Mindlin plate model for small hole radius and low frequency. It is also found that the scattering patterns are different from those of the SO wave incidence. Our work is useful for quantitative evaluation of the plate-like structure by ultrasonic guided waves.展开更多
The feasibility of using the nonlinear effect of primary circumferential guided wave(CGW)propagation for characterizing the change of inner layer thickness of a composite circular tube(CCT)has been investigated.An app...The feasibility of using the nonlinear effect of primary circumferential guided wave(CGW)propagation for characterizing the change of inner layer thickness of a composite circular tube(CCT)has been investigated.An appropriate mode pair of the fundamental and double-frequency CGWs(DFCGWs)has been selected to enable the second harmonics of primary wave mode in the given CCT to accumulate along the circumferential direction.When changes in the inner layer thickness(described as the equivalent inner layer thickness)take place,the corresponding nonlinear CGW measurements are conducted.It is found that there is a direct correlation between change of equivalent inner layer thickness of the CCT and the relative acoustic nonlinearity parameter(Δβ)measured with CGWs propagating through one full circumference,and that the effect of second-harmonic generation(SHG)is very sensitive to change in the inner layer thickness.The experimental result obtained demonstrates the feasibility for quantitatively assessing the change of equivalent inner layer thickness in CCTs using the effect of SHG by primary CGW propagation.展开更多
We present a theoretical investigation of the scattering of high frequency S0 Lamb mode from a circular blind hole defect in a plate based on the 3D theory. The SO wave is incident at the frequency above the A1 mode c...We present a theoretical investigation of the scattering of high frequency S0 Lamb mode from a circular blind hole defect in a plate based on the 3D theory. The SO wave is incident at the frequency above the A1 mode cut-off frequency, in which the popular approximate plate theories are inapplicable. Due to the non-symmetric blind hole defect, the scattered fields will contain higher order converted modes in addition to the fundamental SO and AO modes. The far-field scattering amplitudes of various propagating Lamb modes for different hole sizes are inspected. The results are compared with those of lower frequencies and some different phenomena are found. Two-dimensional Fourier transform （2DFT） results of transient scattered Lamb and SH wave signals agree well with the analytical dispersion curves, which check the validity of the solutions from another point of view.展开更多
The discovery of 2D organic semiconductors of atomically thin structures has attracted great attention due to their emerging optical, electronic, optoelectronic and mechatronic properties. Recent progress in such orga...The discovery of 2D organic semiconductors of atomically thin structures has attracted great attention due to their emerging optical, electronic, optoelectronic and mechatronic properties. Recent progress in such organic nanostructures has opened new opportunities for engineering material properties in many ways, such as, 0D/1D/2D nanoparticles hybridization, strain engineering, atomic doping etc. Moreover, 2D organic nanostructures exhibit a unique feature of bio–functionality and are highly sensitive to bio-analytes. Such peculiar behavior in 2D organics can be utilized to design highly-efficient bio-sensors. Also, a bio-molecular integrated electronic/optoelectronic device with enhanced performance can be attained. Furthermore, the bio-degradable, biocompatible, biometabolizable, non-toxic behaviour and natural origin of organic nanomaterials can address the current ecological concerns of increasing inorganic material based electronic waste. This review highlights the benefits of 2D organic semiconductors. Considering the importance of strategic techniques for growing thin 2D organic layers,this review summarizes progress towards this direction. The possible challenges for long-time stability and future research directions in 2D organic nano electronics/optoelectronics are also discussed. We believe that this review article provides immense research interests in organic 2D nanotechnology for exploiting green technologies in the future.展开更多
In this letter,the streamer propagation in the atmospheric pressure helium plasma jet with afloating electrode nozzle driven by the kHz AC power supply is investigated.The current signal induced by the space charges a...In this letter,the streamer propagation in the atmospheric pressure helium plasma jet with afloating electrode nozzle driven by the kHz AC power supply is investigated.The current signal induced by the space charges and the mean propagation velocity of the guided ionization waves are measured by the capacitive probe method in the discharge region.The space charges in the guided ionization waves are found to increase with the applied voltage,which enhances both the electric field near the streamer head and the propagation velocity.The applicability of the streamer mechanism to the propagation of the guided ionization waves is validated by this electrical diagnostic method.展开更多
基金Project supported by the Natural Science Foundation of Jilin Province of China(Grant Nos.20240402081GH and 20220101012JC)the National Natural Science Foundation of China(Grant No.42074139)the State Key Laboratory of Acoustics,Chinese Academy of Sciences(Grant No.SKLA202308)。
文摘Thickness measurement plays an important role in the monitoring of pipeline corrosion damage. However, the requirement for prior knowledge of the shear wave velocity in the pipeline material for popular ultrasonic thickness measurement limits its widespread application. This paper proposes a method that utilizes cylindrical shear horizontal(SH) guided waves to estimate pipeline thickness without prior knowledge of shear wave velocity. The inversion formulas are derived from the dispersion of higher-order modes with the high-frequency approximation. The waveform of the example problems is simulated using the real-axis integral method. The data points on the dispersion curves are processed in the frequency domain using the wave-number method. These extracted data are then substituted into the derived formulas. The results verify that employing higher-order SH guided waves for the evaluation of thickness and shear wave velocity yields less than1% error. This method can be applied to both metallic and non-metallic pipelines, thus opening new possibilities for health monitoring of pipeline structures.
基金supported by the National Natural Science Foundation of China(Nos.51921003,52275153)the Fundamental Research Funds for the Central Universities(No.NI2023001)+2 种基金the Research Fund of State Key Laboratory of Mechanics and Control for Aero-space Structures(No.MCAS-I-0423G01)the Fund of Pro-spective Layout of Scientific Research for Nanjing University of Aeronautics and Astronauticsthe Priority Academic Program Development of Jiangsu Higher Education Institu-tions of China.
文摘Carbon fiber-reinforced polymer(CFRP)is widely used in aerospace applications.This kind of material may face the threat of high-velocity impact in the process of dedicated service,and the relevant research mainly considers the impact resistance of the material,and lacks the high-velocity impact damage monitoring research of CFRP.To solve this problem,a real high-velocity impact damage experiment and structural health monitoring(SHM)method of CFRP plate based on piezoelectric guided wave is proposed.The results show that CFRP has obvious perforation damage and fiber breakage when high-velocity impact occurs.It is also proved that guided wave SHM technology can be effectively used in the monitoring of such damage,and the damage can be reflected by quantifying the signal changes and damage index(DI).It provides a reference for further research on guided wave structure monitoring of high/hyper-velocity impact damage of CFRP.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11474361,11474093 and 11274388
文摘The effect of second-harmonic generation （SHG） by primary （fundamental） circumferential guided wave （CGW） propagation is investigated from a numerical standpoint. To enable that the second harmonic of the primary CGW mode can accumulate along the circumferential direction, an appropriate mode pair of primary and double frequency CGWs is chosen. Finite element simulations and evaluations of nonlinear CGW propagation are analyzed for the selected CGW mode pair. The numerical simulations performed directly demonstrate that the response of SHG is completely generated by the desired primary CGW mode that satisfies the condition of phase velocity matching at a specific driving frequency, and that the second harmonic of the primary CGW mode does have a cumulative effect with circumferential angles. The numerical perspective obtained yields an insight into the complicated physical process of SHG of primary CGW propagation unavailable previously.
基金Project supported by the National Natural Science Foundation of China(Grant No.51977044).
文摘Using periodic permanent magnet(PPM)electromagnetic acoustic transducers(EMATs),different shear horizontal(SH)guided wave modes can form simultaneously in some situations,which can interfere with the inspection.The main cause of this phenomenon(typically named multiple modes)is related to the frequency bandwidth of excitation signals and the transducer spatial bandwidth.Simply narrowing the frequency bandwidth cannot effectively limit the number of different SH modes.Previous researches showed that unnecessary SH wave modes can be eliminated by using dual EMATs.However,in practical applications,it is more convenient to change the excitation frequency than to use dual EMATs.In this paper,the stress boundary conditions of the PPM-EMAT are analyzed,the analytical expression of SH guided wave is established,and the magnitude of SH guided wave mode under continuous tone and tone-burst input is obtained.A method to generate a single SH mode by re-selecting an operating point is proposed.Furthermore,the influence of the frequency bandwidth of the tone-burst signal is analyzed.Finally,a single SH mode excitation is achieved with tone-burst input.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.40974067,40674059 and 10534040)the State Key Laboratory of Acoustics,Chinese Academy of Sciences(Grant No.200807)Scientific Forefront and Interdisciplinary Innovation Project of Jilin University(Grant No.200903319)
文摘The property of acoustic guided waves generated in a fluid-filled borehole surrounded by a non-Newtonian （Maxwell） fluid-saturated porous formation with a permeable wall is investigated. The influence of non-Newtonian effects on acoustic guided waves such as Stoneley waves, pseudo-Rayleigh waves, flexural waves, and screw waves propagations in a fluid-filled borehole is demonstrated based on the generalized Biot-Tsiklauri model by calculating their velocity dispersion and attenuation coefficients. The corresponding acoustic waveforms illustrate their properties in time domain. The results are also compared with those based on generalized Biot＇s theory. The results show that the influence of non-Newtonian effect on acoustic guided wave, especially on the attenuation coefficient of guided wave propagation in borehole is noticeable.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11474361 and 11274388
文摘The experimental observation of cumulative second-harmonic generation of the primary circumferential guided wave propagation is reported. A pair of wedge transducers is used to generate the primary circumferential guided wave desired and to detect its fundamental-frequency and second-harmonic amplitudes on the outside surface of the circular tube. The amplitudes of the fundamental waves and the second harmonics of the circumferential guided wave propagation are measured for different separations between the two wedge transducers. At the driving frequency where the primary and the double-frequency circumferential guided waves have the same linear phase velocities, the clear second-harmonic signals can be observed. The quantitative relationships between the second-harmonic amplitudes and circumferential angle are analyzed. It is experimentally verified that the second harmonics of primary circumferential guided waves do have a cumulative growth effect with the circumferential angle.
基金Project supported by National Natural Science Foundation of China(Grant Nos.11474361,51405405,and 11622430)
文摘Considering the high sensitivity of the nonlinear ultrasonic measurement technique and great advantages of the guided wave testing method, the use of nonlinear ultrasonic guided waves provides a promising means for evaluating and characterizing the hidden and/or inaccessible damage/degradation in solid media. Increasing attention on the development of the testing method based on nonlinear ultrasonic guided waves is largely attributed to the theoretical advances of nonlinear guided waves propagation in solid media. One of the typical acoustic nonlinear responses is the generation of second harmonics that can be used to effectively evaluate damage/degradation in materials/structures. In this paper, the theoretical progress of second-harmonic generation（SHG） of ultrasonic guided wave propagation in solid media is reviewed. The advances and developments of theoretical investigations on the effect of SHG of ultrasonic guided wave propagation in different structures are addressed. Some obscure understandings and the ideas in dispute are also discussed.
基金the National Natural Science Foundation of China(Grant No.12034005)in part by the Program of Shanghai Academic Research Leader(Grant No.19XD1400500)in part by the China Postdoctoral Science Foundation(Grant No.2019M661334)。
文摘Ultrasonic guided waves(UGWs),which propagate throughout the entire thickness of cortical bone,are attractive for the early diagnosis of osteoporosis.However,this is challenging due to the impact of soft tissue and the inherent difficulties related to multiparametric inversion of cortical bone quality factors,such as cortical thickness and bulk wave velocity.Therefore,in this research,a UGW-based multi-parameter inversion algorithm is developed to predict strength-related factors.In simulation,a free plate(cortical bone)and a bilayer plate(soft tissue and cortical bone)are used to validate the proposed method.The inversed cortical thickness(CTh),longitudinal velocity(V_(L))and transverse velocity(V_(T))are in accordance with the true values.Then four bovine cortical bone plates were used in in vitro experiments.Compared with the reference values,the relative errors for cortical thickness were 3.96%,0.83%,2.87%,and 4.25%,respectively.In the in vivo measurements,UGWs are collected from the tibias of 10 volunteers.The theoretical dispersion curves depicted by the estimated parameters(V_(T),V_(L),CTh)match well with the extracted experimental ones.In comparison with dual-energy x-ray absorptiometry,our results show that the estimated transverse velocity and cortical thickness are highly sensitive to osteoporosis.Therefore,these two parameters(CTh and V_(T))of long bones have potential to be used for diagnosis of bone status in clinical applications.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11474195,11274226,51478258 and 51405287
文摘We investigate the three-dimensional （3D） scattering problem of an incident plane shear horizontal wave by a partly through-thickness hole in an isotropic plate, in which the Lamb wave modes are also included due to the mode conversions by the scattering obstacle in the 3D problem. An analytical model is presented such that the wave fields are expanded in all of propagating and evanescent SH modes and Lamb modes, and the scattered far-fields of three fundamental guided wave modes are analyzed numerically for different sizes of the holes and frequencies. The numerical results are verified by comparing with those obtained by using the approximate Poisson/Mindlin plate model for small hole radius and low frequency. It is also found that the scattering patterns are different from those of the SO wave incidence. Our work is useful for quantitative evaluation of the plate-like structure by ultrasonic guided waves.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.12074050,11834008,and 11704410).
文摘The feasibility of using the nonlinear effect of primary circumferential guided wave(CGW)propagation for characterizing the change of inner layer thickness of a composite circular tube(CCT)has been investigated.An appropriate mode pair of the fundamental and double-frequency CGWs(DFCGWs)has been selected to enable the second harmonics of primary wave mode in the given CCT to accumulate along the circumferential direction.When changes in the inner layer thickness(described as the equivalent inner layer thickness)take place,the corresponding nonlinear CGW measurements are conducted.It is found that there is a direct correlation between change of equivalent inner layer thickness of the CCT and the relative acoustic nonlinearity parameter(Δβ)measured with CGWs propagating through one full circumference,and that the effect of second-harmonic generation(SHG)is very sensitive to change in the inner layer thickness.The experimental result obtained demonstrates the feasibility for quantitatively assessing the change of equivalent inner layer thickness in CCTs using the effect of SHG by primary CGW propagation.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11474195,11274226 and 61171145
文摘We present a theoretical investigation of the scattering of high frequency S0 Lamb mode from a circular blind hole defect in a plate based on the 3D theory. The SO wave is incident at the frequency above the A1 mode cut-off frequency, in which the popular approximate plate theories are inapplicable. Due to the non-symmetric blind hole defect, the scattered fields will contain higher order converted modes in addition to the fundamental SO and AO modes. The far-field scattering amplitudes of various propagating Lamb modes for different hole sizes are inspected. The results are compared with those of lower frequencies and some different phenomena are found. Two-dimensional Fourier transform （2DFT） results of transient scattered Lamb and SH wave signals agree well with the analytical dispersion curves, which check the validity of the solutions from another point of view.
基金financial support from National Science Foundation China (No. 61775147)Australian Research Council (ARC) No. DP180103238
文摘The discovery of 2D organic semiconductors of atomically thin structures has attracted great attention due to their emerging optical, electronic, optoelectronic and mechatronic properties. Recent progress in such organic nanostructures has opened new opportunities for engineering material properties in many ways, such as, 0D/1D/2D nanoparticles hybridization, strain engineering, atomic doping etc. Moreover, 2D organic nanostructures exhibit a unique feature of bio–functionality and are highly sensitive to bio-analytes. Such peculiar behavior in 2D organics can be utilized to design highly-efficient bio-sensors. Also, a bio-molecular integrated electronic/optoelectronic device with enhanced performance can be attained. Furthermore, the bio-degradable, biocompatible, biometabolizable, non-toxic behaviour and natural origin of organic nanomaterials can address the current ecological concerns of increasing inorganic material based electronic waste. This review highlights the benefits of 2D organic semiconductors. Considering the importance of strategic techniques for growing thin 2D organic layers,this review summarizes progress towards this direction. The possible challenges for long-time stability and future research directions in 2D organic nano electronics/optoelectronics are also discussed. We believe that this review article provides immense research interests in organic 2D nanotechnology for exploiting green technologies in the future.
基金supported by National Natural Science Foundation of China(Nos.10775087 and51907190)the State Key Laboratory of NBC Protection for Civilian(SKLNBC 2019–16)。
文摘In this letter,the streamer propagation in the atmospheric pressure helium plasma jet with afloating electrode nozzle driven by the kHz AC power supply is investigated.The current signal induced by the space charges and the mean propagation velocity of the guided ionization waves are measured by the capacitive probe method in the discharge region.The space charges in the guided ionization waves are found to increase with the applied voltage,which enhances both the electric field near the streamer head and the propagation velocity.The applicability of the streamer mechanism to the propagation of the guided ionization waves is validated by this electrical diagnostic method.
