The kinetic characteristics of plasma-assisted oxidative pyrolysis of ammonia are studied by using the global/fluid models hybrid solution method.Firstly,the stable products of plasma-assisted oxidative pyrolysis of a...The kinetic characteristics of plasma-assisted oxidative pyrolysis of ammonia are studied by using the global/fluid models hybrid solution method.Firstly,the stable products of plasma-assisted oxidative pyrolysis of ammonia are measured.The results show that the consumption of NH_(3)/O_(2)and the production of N_(2)/H_(2)change linearly with the increase of voltage,which indicates the decoupling of nonequilibrium molecular excitation and oxidative pyrolysis of ammonia at low temperatures.Secondly,the detailed reaction kinetics mechanism of ammonia oxidative pyrolysis stimulated by a nanosecond pulse voltage at low pressure and room temperature is established.Based on the reaction path analysis,the simplified mechanism is obtained.The detailed and simplified mechanism simulation results are compared with experimental data to verify the accuracy of the simplified mechanism.Finally,based on the simplified mechanism,the fluid model of ammonia oxidative pyrolysis stimulated by the nanosecond pulse plasma is established to study the pre-sheath/sheath behavior and the resultant consumption and formation of key species.The results show that the generation,development,and propagation of the pre-sheath have a great influence on the formation and consumption of species.The consumption of NH_(3)by the cathode pre-sheath is greater than that by the anode pre-sheath,but the opposite is true for OH and O(1S).However,within the sheath,almost all reactions do not occur.Further,by changing the parameters of nanosecond pulse power supply voltage,it is found that the electron number density,electron current density,and applied peak voltages are not the direct reasons for the structural changes of the sheath and pre-sheath.Furthermore,the discharge interval has little effect on the sheath structure and gas mixture breakdown.The research results of this paper not only help to understand the kinetic promotion of non-equilibrium excitation in the process of oxidative pyrolysis but also help to explore the influence of transport and chemical reaction kinetics on the oxidative pyrolysis of ammonia.展开更多
The Euler-Euler model is less effective in capturing the free surface of flow film in the spiral separator,and thus a Eulerian multi-fluid volume of fluid(VOF)model was first proposed to describe the particulate flow ...The Euler-Euler model is less effective in capturing the free surface of flow film in the spiral separator,and thus a Eulerian multi-fluid volume of fluid(VOF)model was first proposed to describe the particulate flow in spiral separators.In order to improve the applicability of the model in the high solid concentration system,the Bagnold effect was incorporated into the modelling framework.The capability of the proposed model in terms of predicting the flow film shape in a LD9 spiral separator was evaluated via comparison with measured flow film thicknesses reported in literature.Results showed that sharp air–water and air-pulp interfaces can be obtained using the proposed model,and the shapes of the predicted flow films before and after particle addition were reasonably consistent with the observations reported in literature.Furthermore,the experimental and numerical simulation of the separation of quartz and hematite were performed in a laboratory-scale spiral separator.When the Bagnold lift force model was considered,predictions of the grade of iron and solid concentration by mass for different trough lengths were more consistent with experimental data.In the initial development stage,the quartz particles at the bottom of the flow layer were more possible to be lifted due to the Bagnold force.Thus,a better predicted vertical stratification between quartz and hematite particles was obtained,which provided favorable conditions for subsequent radial segregation.展开更多
A three-dimensional model for gas-solid flow in a circulating fluidized bed（CFB） riser was developed based on computational particle fluid dynamics（CPFD）.The model was used to simulate the gas-solid flow behavior ...A three-dimensional model for gas-solid flow in a circulating fluidized bed（CFB） riser was developed based on computational particle fluid dynamics（CPFD）.The model was used to simulate the gas-solid flow behavior inside a circulating fluidized bed riser operating at various superficial gas velocities and solids mass fluxes in two fluidization regimes,a dilute phase transport（DPT） regime and a fast fluidization（FF） regime.The simulation results were evaluated based on comparison with experimental data of solids velocity and holdup,obtained from non-invasive automated radioactive particle tracking and gamma-ray tomography techniques,respectively.The agreement of the predicted solids velocity and holdup with experimental data validated the CPFD model for the CFB riser.The model predicted the main features of the gas-solid flows in the two regimes;the uniform dilute phase in the DPT regime,and the coexistence of the dilute phase in the upper region and the dense phase in the lower region in the FF regime.The clustering and solids back mixing in the FF regime were stronger than those in the DPT regime.展开更多
Based on the fluid flow time-delayed model proposed by Misra et al in internet congestion control, one modified time-delayed model is presented, where the influence of the communication delay on the router queue lengt...Based on the fluid flow time-delayed model proposed by Misra et al in internet congestion control, one modified time-delayed model is presented, where the influence of the communication delay on the router queue length is investigated in detail. The main advantage of the new model is that its stability domain is larger even without an extra controller. By linear stability analysis and numerical simulation, tbe effectiveness and feasibility of the novel model in internet congestion control are verified.展开更多
A deep understanding of the internal ballistic process and the factors affecting it is of primary importance to efficiently design a gun system and ensure its safe management. One of the main goals of internal ballist...A deep understanding of the internal ballistic process and the factors affecting it is of primary importance to efficiently design a gun system and ensure its safe management. One of the main goals of internal ballistics is to estimate the gas pressure into the combustion chamber and the projectile muzzle velocity in order to use the propellant to its higher efficiency while avoiding over-pressure phenomena. Dealing with the internal ballistic problem is a complex undertaking since it requires handling the interaction between different constituents during a transient time lapse with very steep rise of pressure and temperature. Several approaches have been proposed in the literature, based on different assumptions and techniques. Generally, depending on the used mathematical framework, they can be classified into two categories: computational fluid dynamics-based models and lumped-parameter ones. By focusing on gun systems, this paper offers a review of the main contributions in the field by mentioning their advantages and drawbacks. An insight into the limitations of the currently available modelling strategies is provided,as well as some considerations on the choice of one model over another. Lumped-parameter models, for example, are a good candidate for performing parametric analysis and optimisation processes of gun systems, given their minimum requirements of computer resources. Conversely, CFD-based models have a better capacity to address more sophisticated phenomena like pressure waves and turbulent flow effects. The performed review also reveals that too little attention has been given to small calibre guns since the majority of currently available models are conceived for medium and large calibre gun systems.Similarly, aspects like wear phenomena, bore deformations or projectile-barrel interactions still need to be adequately addressed and our suggestion is to dedicate more effort on it.展开更多
The electron energy distribution function （EEDF）, predicted by the Boltzmann equation solver BOLSIG＋ based on the two-term approximation, is introduced into the fluid model for simulating the high-power microwave ...The electron energy distribution function （EEDF）, predicted by the Boltzmann equation solver BOLSIG＋ based on the two-term approximation, is introduced into the fluid model for simulating the high-power microwave （HPM） breakdown in argon, nitrogen, and air, and its validity is examined by comparing with the results of particle-in-cell Monte Carlo collision （PIC/MCC） simulations as well as the experimental data. Numerical results show that, the breakdown time of the fluid model with the Maxwellian EEDF matches that of the PIC/MCC simulations in nitrogen; however, in argon under high pressures, the results from the Maxwellian EEDF were poor. This is due to an overestimation of the energy tail of the Maxwellian EEDF in argon breakdown. The prediction of the fluid model with the BOLSIG＋ EEDF, however, agrees very well with the PIC/MCC prediction in nitrogen and argon over a wide range of pressures. The accuracy of the fluid model with the BOLSIG＋ EEDF is also verified by the experimental results of the air breakdown.展开更多
In this article, we are concerned with the strong solutions for the incompress- ible fluid models of Korteweg type in a bounded domain Ω СR^3. We prove the existence and uniqueness of local strong solutions to the i...In this article, we are concerned with the strong solutions for the incompress- ible fluid models of Korteweg type in a bounded domain Ω СR^3. We prove the existence and uniqueness of local strong solutions to the initial boundary value problem. We point out that in this article we allow the existence of initial vacuum provided initial data satisfy a compatibility condition.展开更多
为高效精确模拟航空动力系统的液态燃料横向射流多尺度雾化过程,分别采用离散相模型(discrete phase model,DPM)、流体体积(volume of fluid,VOF)法耦合DPM(VOF-DPM)对横向射流雾化过程进行数值模拟,对比2种模型对横向射流雾化过程的仿...为高效精确模拟航空动力系统的液态燃料横向射流多尺度雾化过程,分别采用离散相模型(discrete phase model,DPM)、流体体积(volume of fluid,VOF)法耦合DPM(VOF-DPM)对横向射流雾化过程进行数值模拟,对比2种模型对横向射流雾化过程的仿真结果,并研究模型转换直径与破碎模型对横向射流雾化过程仿真结果的影响。仿真结果表明:相比DPM,VOF-DPM仿真得到的射流穿透深度更接近试验结果,射流雾化过程更真实,并且能够捕捉到更详细的流场信息;当模型转换直径较小时,不能转换为离散相颗粒的液滴相对较多,这些液滴仍由VOF求解,并阻挡气流导致在其周围产生小涡团;添加破碎模型对射流穿透深度和流场结构几乎没有影响,但导致离散相颗粒继续破碎成更多更小的颗粒。展开更多
A two-phase wedge-sliding model is developed based on the micro-cellular structure and minimum entropy theory of a stable system, and it is used to describe the ingredient distribution of a mixed fluid in a non-unifor...A two-phase wedge-sliding model is developed based on the micro-cellular structure and minimum entropy theory of a stable system, and it is used to describe the ingredient distribution of a mixed fluid in a non-uniform stress field and to analyse its phase drift phenomenon. In the model, the drift-inhibition angle and the expansion-inhibition angle are also deduced and used as evaluating indexes to describe the drifting trend of different ingredients among the mixed fluids. For solving above two indexes of the model, a new calculation method is developed and used to compute the phase distributions of multiphase fluid at peak stress and gradient area stress, respectively. As an example, the flow process of grease in a pipe is analysed by simulation method and used to verify the validity of the model.展开更多
A mixed subgrid-scale（SGS） model based on coherent structures and temporal approximate deconvolution（MCT） is proposed for turbulent drag-reducing flows of viscoelastic fluids. The main idea of the MCT SGS model is...A mixed subgrid-scale（SGS） model based on coherent structures and temporal approximate deconvolution（MCT） is proposed for turbulent drag-reducing flows of viscoelastic fluids. The main idea of the MCT SGS model is to perform spatial filtering for the momentum equation and temporal filtering for the conformation tensor transport equation of turbulent flow of viscoelastic fluid, respectively. The MCT model is suitable for large eddy simulation（LES） of turbulent dragreducing flows of viscoelastic fluids in engineering applications since the model parameters can be easily obtained. The LES of forced homogeneous isotropic turbulence（FHIT） with polymer additives and turbulent channel flow with surfactant additives based on MCT SGS model shows excellent agreements with direct numerical simulation（DNS） results. Compared with the LES results using the temporal approximate deconvolution model（TADM） for FHIT with polymer additives, this mixed SGS model MCT behaves better, regarding the enhancement of calculating parameters such as the Reynolds number.For scientific and engineering research, turbulent flows at high Reynolds numbers are expected, so the MCT model can be a more suitable model for the LES of turbulent drag-reducing flows of viscoelastic fluid with polymer or surfactant additives.展开更多
We investigate the asymptotic behavior of solutions to the initial boundary value problem for the micropolar fluid model in a half line R+:=(0,∞).Inspired by the relationship between a micropolar fluid model and Navi...We investigate the asymptotic behavior of solutions to the initial boundary value problem for the micropolar fluid model in a half line R+:=(0,∞).Inspired by the relationship between a micropolar fluid model and Navier-Stokes equations,we prove that the composite wave consisting of the transonic boundary layer solution,the 1-rarefaction wave,the viscous 2-contact wave and the 3-rarefaction wave for the inflow problem on the micropolar fluid model is time-asymptotic ally stable under some smallness conditions.Meanwhile,we obtain the global existence of solutions based on the basic energy method.展开更多
基于Volume of Fluid(VOF)模型对二维溃坝经典案例进行模拟,通过与实验值进行对比,验证VOF模型的计算精度。针对二维溃坝下游有障碍物的情况,研究不同时刻的流场变化情况,与实验结果比较分析,并对障碍物所受到的压力进行分析。通过更改...基于Volume of Fluid(VOF)模型对二维溃坝经典案例进行模拟,通过与实验值进行对比,验证VOF模型的计算精度。针对二维溃坝下游有障碍物的情况,研究不同时刻的流场变化情况,与实验结果比较分析,并对障碍物所受到的压力进行分析。通过更改障碍物的位置,研究不同障碍物位置对溃坝水流的影响,不同障碍物位置所受到的压力。结果表明:VOF可以很好地模拟溃坝水流。对于下游有障碍物的溃坝模型,障碍物的最低点所受到的压力最大,最高点所受到的压力最小。障碍物位置距离溃坝水流越远,受到的压力越大,液面变化越剧烈,溃坝水流撞击障碍物行成的水舌高度越高,飞溅的水体也相应增加,水舌撞击右壁面的高度越大。展开更多
The surface wave generated by flow around a ship hull moving near free surface of water is simulated numerically in this study. The three-dimensional implicit finite volume method （FVM） is applied to solve Reynolds ...The surface wave generated by flow around a ship hull moving near free surface of water is simulated numerically in this study. The three-dimensional implicit finite volume method （FVM） is applied to solve Reynolds averaged Navier-Stokes （RANS） equation. The realizable k-e turbulence model has been implemented to capture turbulent flow around the ship hull in the free surface zone. The volume of fluid （VOF） method coupled with the Stokes wave theory has been used to determine the free surface effect of water. By using is a six degrees of freedom model, the ship hull＇s movement is numerically solved with the Stokes wave together. Under the action of Stokes waves on the sea, the interface between the air and water waves at the same regular pattem and so does the pressure and the vertical velocity. The ship hull moves in the same way as the wave. The amplitude of the ship hull＇s heave is less than the wave height because of the viscosity damping. This method could provide an important reference for the study of ships＇ movement, wave and hydrodynamics.展开更多
The relationship between the extensional viscosity and material parameters was studied through the analytical formulas of stress and extensional viscosity. The differential equations were solved to obtain the relation...The relationship between the extensional viscosity and material parameters was studied through the analytical formulas of stress and extensional viscosity. The differential equations were solved to obtain the relationship between extensional viscosity and strain rates. The results obtained qualitatively agree with the experimental results. The study makes it practicable to simulate the rheologic behaviors of spinning flow of liquid crystalline polymer using co-rotational Oldroyd fluid B model.展开更多
A three-dimensional fluid model is developed to investigate the radio-frequency inductively coupled H2 plasma in a reactor with a rectangular expansion chamber and a cylindrical driver chamber,for neutral beam injecti...A three-dimensional fluid model is developed to investigate the radio-frequency inductively coupled H2 plasma in a reactor with a rectangular expansion chamber and a cylindrical driver chamber,for neutral beam injection system in CFETR.In this model,the electron effective collision frequency and the ion mobility at high E-fields are employed,for accurate simulation of discharges at low pressures(0.3 Pa-2 Pa)and high powers(40 kW-100 kW).The results indicate that when the high E-field ion mobility is taken into account,the electron density is about four times higher than the value in the low E-field case.In addition,the influences of the magnetic field,pressure and power on the electron density and electron temperature are demonstrated.It is found that the electron density and electron temperature in the xz-plane along permanent magnet side become much more asymmetric when magnetic field enhances.However,the plasma parameters in the yz-plane without permanent magnet side are symmetric no matter the magnetic field is applied or not.Besides,the maximum of the electron density first increases and then decreases with magnetic field,while the electron temperature at the bottom of the expansion region first decreases and then almost keeps constant.As the pressure increases from 0.3 Pa to 2 Pa,the electron density becomes higher,with the maximum moving upwards to the driver region,and the symmetry of the electron temperature in the xz-plane becomes much better.As power increases,the electron density rises,whereas the spatial distribution is similar.It can be summarized that the magnetic field and gas pressure have great influence on the symmetry of the plasma parameters,while the power only has little effect.展开更多
Fluid catalytic cracking(FCC)is a vitally important refinery process.The fractionation,absorption,and stabilization system in the FCC process is a significant way to obtain key products,and its parameters will directl...Fluid catalytic cracking(FCC)is a vitally important refinery process.The fractionation,absorption,and stabilization system in the FCC process is a significant way to obtain key products,and its parameters will directly affect the quality of the products.In this work,using industrial data from an actual FCC process,a model of the FCC fractionation,absorption,and stabilization system was developed using process simulation software.The sequence quadratic program algorithm was then used to identify the parameters of each tower,increasing the accuracy of the simulation results.Next,using this improved model,a sensitivity analysis was performed to examine the effects of different operating conditions.The pattern-search method was then used to optimize the operating parameters of the system.The results showed that the optimized model has good prediction accuracy,and using the model,it was found that changing the operation parameters could result in a 1.84%improvement in economic benefits.As such,the developed model was demonstrated to be usefully applicable to the optimization of the process operation of an FCC fractionation,absorption,and stabilization system.展开更多
The numerical modeling of oil displacement by nanofluid based on three-dimensional micromodel of cores with different permeability was carried out by the volume of fluid(VOF)method with experimentally measured values ...The numerical modeling of oil displacement by nanofluid based on three-dimensional micromodel of cores with different permeability was carried out by the volume of fluid(VOF)method with experimentally measured values of interfacial tension,contact angle and viscosity.Water-based suspensions of SiO_(2) nanoparticles with a concentration of 0–1%and different particle sizes were considered to study the effect of concentration and size of nanoparticles,displacement fluid flow rate,oil viscosity and core permeability on the efficiency of oil displacement by nanofluid.The oil recovery factor(ORF)increases with the increase of mass fraction of nanoparticles.An increase in nanoparticles’concentration to 0.5% allows an increase in ORF by about 19% compared to water flooding.The ORF increases with the decrease of nanoparticle size,and declines with the increase of displacing rate.It has been shown that the use of nanosuspensions for enhanced oil recovery is most effective for low-permeable reservoirs with highly viscous oil in injection modes with capillary number close to the immobilization threshold,and the magnitude of oil recovery enhancement decreases with the increase of displacement speed.The higher the oil viscosity,the lower the reservoir rock permeability,the higher the ORF improved by nanofluids will be.展开更多
A radio-frequency(RF) inductively coupled negative hydrogen ion source(NHIS) has been adopted in the China Fusion Engineering Test Reactor(CFETR) to generate negative hydrogen ions.By incorporating the level-lumping m...A radio-frequency(RF) inductively coupled negative hydrogen ion source(NHIS) has been adopted in the China Fusion Engineering Test Reactor(CFETR) to generate negative hydrogen ions.By incorporating the level-lumping method into a three-dimensional fluid model,the volume production and transportation of H^(-) in the NHIS,which consists of a cylindrical driver region and a rectangular expansion chamber,are investigated self-consistently at a large input power(40 k W) and different pressures(0.3–2.0 Pa).The results indicate that with the increase of pressure,the H^(-) density at the bottom of the expansion region first increases and then decreases.In addition,the effect of the magnetic filter is examined.It is noteworthy that a significant increase in the H^(-) density is observed when the magnetic filter is introduced.As the permanent magnets move towards the driver region,the H^(-) density decreases monotonically and the asymmetry is enhanced.This study contributes to the understanding of H-distribution under various conditions and facilitates the optimization of volume production of negative hydrogen ions in the NHIS.展开更多
基金Fundamental Research Funds for the Central Universities(M23JBZY00050)National Natural Science Foundation of China(22278032)。
文摘The kinetic characteristics of plasma-assisted oxidative pyrolysis of ammonia are studied by using the global/fluid models hybrid solution method.Firstly,the stable products of plasma-assisted oxidative pyrolysis of ammonia are measured.The results show that the consumption of NH_(3)/O_(2)and the production of N_(2)/H_(2)change linearly with the increase of voltage,which indicates the decoupling of nonequilibrium molecular excitation and oxidative pyrolysis of ammonia at low temperatures.Secondly,the detailed reaction kinetics mechanism of ammonia oxidative pyrolysis stimulated by a nanosecond pulse voltage at low pressure and room temperature is established.Based on the reaction path analysis,the simplified mechanism is obtained.The detailed and simplified mechanism simulation results are compared with experimental data to verify the accuracy of the simplified mechanism.Finally,based on the simplified mechanism,the fluid model of ammonia oxidative pyrolysis stimulated by the nanosecond pulse plasma is established to study the pre-sheath/sheath behavior and the resultant consumption and formation of key species.The results show that the generation,development,and propagation of the pre-sheath have a great influence on the formation and consumption of species.The consumption of NH_(3)by the cathode pre-sheath is greater than that by the anode pre-sheath,but the opposite is true for OH and O(1S).However,within the sheath,almost all reactions do not occur.Further,by changing the parameters of nanosecond pulse power supply voltage,it is found that the electron number density,electron current density,and applied peak voltages are not the direct reasons for the structural changes of the sheath and pre-sheath.Furthermore,the discharge interval has little effect on the sheath structure and gas mixture breakdown.The research results of this paper not only help to understand the kinetic promotion of non-equilibrium excitation in the process of oxidative pyrolysis but also help to explore the influence of transport and chemical reaction kinetics on the oxidative pyrolysis of ammonia.
基金the National Natural Science Foundation of China(Nos.51974065 and 52274257)the Open Foundation of State Key Laboratory of Mineral Processing(No.BGRIMMKJSKL-2020-13)the Fundamental Research Funds for the Central Universities(Nos.N2201008 and N2201004).
文摘The Euler-Euler model is less effective in capturing the free surface of flow film in the spiral separator,and thus a Eulerian multi-fluid volume of fluid(VOF)model was first proposed to describe the particulate flow in spiral separators.In order to improve the applicability of the model in the high solid concentration system,the Bagnold effect was incorporated into the modelling framework.The capability of the proposed model in terms of predicting the flow film shape in a LD9 spiral separator was evaluated via comparison with measured flow film thicknesses reported in literature.Results showed that sharp air–water and air-pulp interfaces can be obtained using the proposed model,and the shapes of the predicted flow films before and after particle addition were reasonably consistent with the observations reported in literature.Furthermore,the experimental and numerical simulation of the separation of quartz and hematite were performed in a laboratory-scale spiral separator.When the Bagnold lift force model was considered,predictions of the grade of iron and solid concentration by mass for different trough lengths were more consistent with experimental data.In the initial development stage,the quartz particles at the bottom of the flow layer were more possible to be lifted due to the Bagnold force.Thus,a better predicted vertical stratification between quartz and hematite particles was obtained,which provided favorable conditions for subsequent radial segregation.
基金support by the National Basic Research Program (Grant No. 2010CB226906,and 2012CB215000)
文摘A three-dimensional model for gas-solid flow in a circulating fluidized bed（CFB） riser was developed based on computational particle fluid dynamics（CPFD）.The model was used to simulate the gas-solid flow behavior inside a circulating fluidized bed riser operating at various superficial gas velocities and solids mass fluxes in two fluidization regimes,a dilute phase transport（DPT） regime and a fast fluidization（FF） regime.The simulation results were evaluated based on comparison with experimental data of solids velocity and holdup,obtained from non-invasive automated radioactive particle tracking and gamma-ray tomography techniques,respectively.The agreement of the predicted solids velocity and holdup with experimental data validated the CPFD model for the CFB riser.The model predicted the main features of the gas-solid flows in the two regimes;the uniform dilute phase in the DPT regime,and the coexistence of the dilute phase in the upper region and the dense phase in the lower region in the FF regime.The clustering and solids back mixing in the FF regime were stronger than those in the DPT regime.
基金supported by the National Natural Science Foundation of China (Grant No 70571017)the Research Foundation from Provincial Education Department of Zhejiang of China (Grant No 21186000507)
文摘Based on the fluid flow time-delayed model proposed by Misra et al in internet congestion control, one modified time-delayed model is presented, where the influence of the communication delay on the router queue length is investigated in detail. The main advantage of the new model is that its stability domain is larger even without an extra controller. By linear stability analysis and numerical simulation, tbe effectiveness and feasibility of the novel model in internet congestion control are verified.
基金the support provided by the Royal Higher Institute for Defence (RHID) of the Belgian Defence, which has contributed to the progress of this ongoing research.
文摘A deep understanding of the internal ballistic process and the factors affecting it is of primary importance to efficiently design a gun system and ensure its safe management. One of the main goals of internal ballistics is to estimate the gas pressure into the combustion chamber and the projectile muzzle velocity in order to use the propellant to its higher efficiency while avoiding over-pressure phenomena. Dealing with the internal ballistic problem is a complex undertaking since it requires handling the interaction between different constituents during a transient time lapse with very steep rise of pressure and temperature. Several approaches have been proposed in the literature, based on different assumptions and techniques. Generally, depending on the used mathematical framework, they can be classified into two categories: computational fluid dynamics-based models and lumped-parameter ones. By focusing on gun systems, this paper offers a review of the main contributions in the field by mentioning their advantages and drawbacks. An insight into the limitations of the currently available modelling strategies is provided,as well as some considerations on the choice of one model over another. Lumped-parameter models, for example, are a good candidate for performing parametric analysis and optimisation processes of gun systems, given their minimum requirements of computer resources. Conversely, CFD-based models have a better capacity to address more sophisticated phenomena like pressure waves and turbulent flow effects. The performed review also reveals that too little attention has been given to small calibre guns since the majority of currently available models are conceived for medium and large calibre gun systems.Similarly, aspects like wear phenomena, bore deformations or projectile-barrel interactions still need to be adequately addressed and our suggestion is to dedicate more effort on it.
基金Project supported by the National Basic Research Program of China(Grant No.2013CB328904)the Fundamental Research Funds for the Central Universities,Chinathe Open Research Fund of Key Laboratory of Cognitive Radio and Information Processing of Ministry of Education of China
文摘The electron energy distribution function （EEDF）, predicted by the Boltzmann equation solver BOLSIG＋ based on the two-term approximation, is introduced into the fluid model for simulating the high-power microwave （HPM） breakdown in argon, nitrogen, and air, and its validity is examined by comparing with the results of particle-in-cell Monte Carlo collision （PIC/MCC） simulations as well as the experimental data. Numerical results show that, the breakdown time of the fluid model with the Maxwellian EEDF matches that of the PIC/MCC simulations in nitrogen; however, in argon under high pressures, the results from the Maxwellian EEDF were poor. This is due to an overestimation of the energy tail of the Maxwellian EEDF in argon breakdown. The prediction of the fluid model with the BOLSIG＋ EEDF, however, agrees very well with the PIC/MCC prediction in nitrogen and argon over a wide range of pressures. The accuracy of the fluid model with the BOLSIG＋ EEDF is also verified by the experimental results of the air breakdown.
基金Supported by NSF (10531020) of Chinathe Programof 985 Innovation Engineering on Information in Xiamen University (2004-2007) and NCETXMU
文摘In this article, we are concerned with the strong solutions for the incompress- ible fluid models of Korteweg type in a bounded domain Ω СR^3. We prove the existence and uniqueness of local strong solutions to the initial boundary value problem. We point out that in this article we allow the existence of initial vacuum provided initial data satisfy a compatibility condition.
文摘为高效精确模拟航空动力系统的液态燃料横向射流多尺度雾化过程,分别采用离散相模型(discrete phase model,DPM)、流体体积(volume of fluid,VOF)法耦合DPM(VOF-DPM)对横向射流雾化过程进行数值模拟,对比2种模型对横向射流雾化过程的仿真结果,并研究模型转换直径与破碎模型对横向射流雾化过程仿真结果的影响。仿真结果表明:相比DPM,VOF-DPM仿真得到的射流穿透深度更接近试验结果,射流雾化过程更真实,并且能够捕捉到更详细的流场信息;当模型转换直径较小时,不能转换为离散相颗粒的液滴相对较多,这些液滴仍由VOF求解,并阻挡气流导致在其周围产生小涡团;添加破碎模型对射流穿透深度和流场结构几乎没有影响,但导致离散相颗粒继续破碎成更多更小的颗粒。
基金Project supported by the National Natural Science Foundation of China (Grant No. 51075311)
文摘A two-phase wedge-sliding model is developed based on the micro-cellular structure and minimum entropy theory of a stable system, and it is used to describe the ingredient distribution of a mixed fluid in a non-uniform stress field and to analyse its phase drift phenomenon. In the model, the drift-inhibition angle and the expansion-inhibition angle are also deduced and used as evaluating indexes to describe the drifting trend of different ingredients among the mixed fluids. For solving above two indexes of the model, a new calculation method is developed and used to compute the phase distributions of multiphase fluid at peak stress and gradient area stress, respectively. As an example, the flow process of grease in a pipe is analysed by simulation method and used to verify the validity of the model.
基金Project supported by the China Postdoctoral Science Foundation(Grant No.2011M500652)the National Natural Science Foundation of China(Grant Nos.51276046 and 51206033)the Specialized Research Fund for the Doctoral Program of Higher Education of China(Grant No.20112302110020)
文摘A mixed subgrid-scale（SGS） model based on coherent structures and temporal approximate deconvolution（MCT） is proposed for turbulent drag-reducing flows of viscoelastic fluids. The main idea of the MCT SGS model is to perform spatial filtering for the momentum equation and temporal filtering for the conformation tensor transport equation of turbulent flow of viscoelastic fluid, respectively. The MCT model is suitable for large eddy simulation（LES） of turbulent dragreducing flows of viscoelastic fluids in engineering applications since the model parameters can be easily obtained. The LES of forced homogeneous isotropic turbulence（FHIT） with polymer additives and turbulent channel flow with surfactant additives based on MCT SGS model shows excellent agreements with direct numerical simulation（DNS） results. Compared with the LES results using the temporal approximate deconvolution model（TADM） for FHIT with polymer additives, this mixed SGS model MCT behaves better, regarding the enhancement of calculating parameters such as the Reynolds number.For scientific and engineering research, turbulent flows at high Reynolds numbers are expected, so the MCT model can be a more suitable model for the LES of turbulent drag-reducing flows of viscoelastic fluid with polymer or surfactant additives.
基金The research was supported by the National Natural Science Foundation of China(11601164,11971183)the Fundamental Research Funds for the Central Universities(ZQN-701)the Natural Science Foundation of Fujian Province of China(2020J01071).
文摘We investigate the asymptotic behavior of solutions to the initial boundary value problem for the micropolar fluid model in a half line R+:=(0,∞).Inspired by the relationship between a micropolar fluid model and Navier-Stokes equations,we prove that the composite wave consisting of the transonic boundary layer solution,the 1-rarefaction wave,the viscous 2-contact wave and the 3-rarefaction wave for the inflow problem on the micropolar fluid model is time-asymptotic ally stable under some smallness conditions.Meanwhile,we obtain the global existence of solutions based on the basic energy method.
文摘基于Volume of Fluid(VOF)模型对二维溃坝经典案例进行模拟,通过与实验值进行对比,验证VOF模型的计算精度。针对二维溃坝下游有障碍物的情况,研究不同时刻的流场变化情况,与实验结果比较分析,并对障碍物所受到的压力进行分析。通过更改障碍物的位置,研究不同障碍物位置对溃坝水流的影响,不同障碍物位置所受到的压力。结果表明:VOF可以很好地模拟溃坝水流。对于下游有障碍物的溃坝模型,障碍物的最低点所受到的压力最大,最高点所受到的压力最小。障碍物位置距离溃坝水流越远,受到的压力越大,液面变化越剧烈,溃坝水流撞击障碍物行成的水舌高度越高,飞溅的水体也相应增加,水舌撞击右壁面的高度越大。
基金Foundation item： Supported by National Natural Science Foundation of China （51409031）, Fundamental Research Funds for the Central Universities （3132015203） and China Postdoctoral Science Foundation （2014M561216）.
文摘The surface wave generated by flow around a ship hull moving near free surface of water is simulated numerically in this study. The three-dimensional implicit finite volume method （FVM） is applied to solve Reynolds averaged Navier-Stokes （RANS） equation. The realizable k-e turbulence model has been implemented to capture turbulent flow around the ship hull in the free surface zone. The volume of fluid （VOF） method coupled with the Stokes wave theory has been used to determine the free surface effect of water. By using is a six degrees of freedom model, the ship hull＇s movement is numerically solved with the Stokes wave together. Under the action of Stokes waves on the sea, the interface between the air and water waves at the same regular pattem and so does the pressure and the vertical velocity. The ship hull moves in the same way as the wave. The amplitude of the ship hull＇s heave is less than the wave height because of the viscosity damping. This method could provide an important reference for the study of ships＇ movement, wave and hydrodynamics.
文摘The relationship between the extensional viscosity and material parameters was studied through the analytical formulas of stress and extensional viscosity. The differential equations were solved to obtain the relationship between extensional viscosity and strain rates. The results obtained qualitatively agree with the experimental results. The study makes it practicable to simulate the rheologic behaviors of spinning flow of liquid crystalline polymer using co-rotational Oldroyd fluid B model.
基金Project supported by the National Key Research and Development Program of China(Grant No.2017YFE0300106)the National Natural Science Foundation of China(Grant No.12075049)the Fundamental Research Funds for the Central Universities,China(Grant Nos.DUT20LAB201 and DUT21LAB110).
文摘A three-dimensional fluid model is developed to investigate the radio-frequency inductively coupled H2 plasma in a reactor with a rectangular expansion chamber and a cylindrical driver chamber,for neutral beam injection system in CFETR.In this model,the electron effective collision frequency and the ion mobility at high E-fields are employed,for accurate simulation of discharges at low pressures(0.3 Pa-2 Pa)and high powers(40 kW-100 kW).The results indicate that when the high E-field ion mobility is taken into account,the electron density is about four times higher than the value in the low E-field case.In addition,the influences of the magnetic field,pressure and power on the electron density and electron temperature are demonstrated.It is found that the electron density and electron temperature in the xz-plane along permanent magnet side become much more asymmetric when magnetic field enhances.However,the plasma parameters in the yz-plane without permanent magnet side are symmetric no matter the magnetic field is applied or not.Besides,the maximum of the electron density first increases and then decreases with magnetic field,while the electron temperature at the bottom of the expansion region first decreases and then almost keeps constant.As the pressure increases from 0.3 Pa to 2 Pa,the electron density becomes higher,with the maximum moving upwards to the driver region,and the symmetry of the electron temperature in the xz-plane becomes much better.As power increases,the electron density rises,whereas the spatial distribution is similar.It can be summarized that the magnetic field and gas pressure have great influence on the symmetry of the plasma parameters,while the power only has little effect.
基金supported by the National Key Research&Development Program-Intergovernmental International Science and Technology Innovation Cooperation Project (Grant No.2021YFE0112800)National Natural Science Foundation of China (Grant Nos.61973124+2 种基金61873093)the SINOPEC Research Program (Grant No.119030-2)Shanghai AI Lab
文摘Fluid catalytic cracking(FCC)is a vitally important refinery process.The fractionation,absorption,and stabilization system in the FCC process is a significant way to obtain key products,and its parameters will directly affect the quality of the products.In this work,using industrial data from an actual FCC process,a model of the FCC fractionation,absorption,and stabilization system was developed using process simulation software.The sequence quadratic program algorithm was then used to identify the parameters of each tower,increasing the accuracy of the simulation results.Next,using this improved model,a sensitivity analysis was performed to examine the effects of different operating conditions.The pattern-search method was then used to optimize the operating parameters of the system.The results showed that the optimized model has good prediction accuracy,and using the model,it was found that changing the operation parameters could result in a 1.84%improvement in economic benefits.As such,the developed model was demonstrated to be usefully applicable to the optimization of the process operation of an FCC fractionation,absorption,and stabilization system.
文摘The numerical modeling of oil displacement by nanofluid based on three-dimensional micromodel of cores with different permeability was carried out by the volume of fluid(VOF)method with experimentally measured values of interfacial tension,contact angle and viscosity.Water-based suspensions of SiO_(2) nanoparticles with a concentration of 0–1%and different particle sizes were considered to study the effect of concentration and size of nanoparticles,displacement fluid flow rate,oil viscosity and core permeability on the efficiency of oil displacement by nanofluid.The oil recovery factor(ORF)increases with the increase of mass fraction of nanoparticles.An increase in nanoparticles’concentration to 0.5% allows an increase in ORF by about 19% compared to water flooding.The ORF increases with the decrease of nanoparticle size,and declines with the increase of displacing rate.It has been shown that the use of nanosuspensions for enhanced oil recovery is most effective for low-permeable reservoirs with highly viscous oil in injection modes with capillary number close to the immobilization threshold,and the magnitude of oil recovery enhancement decreases with the increase of displacement speed.The higher the oil viscosity,the lower the reservoir rock permeability,the higher the ORF improved by nanofluids will be.
基金supported by the National Key R&D Program of China (No. 2017YFE0300106)National Natural Science Foundation of China (Nos. 11935005 and 12075049)the Fundamental Research Funds for the Central Universities(Nos. DUT21TD104 and DUT21LAB110)。
文摘A radio-frequency(RF) inductively coupled negative hydrogen ion source(NHIS) has been adopted in the China Fusion Engineering Test Reactor(CFETR) to generate negative hydrogen ions.By incorporating the level-lumping method into a three-dimensional fluid model,the volume production and transportation of H^(-) in the NHIS,which consists of a cylindrical driver region and a rectangular expansion chamber,are investigated self-consistently at a large input power(40 k W) and different pressures(0.3–2.0 Pa).The results indicate that with the increase of pressure,the H^(-) density at the bottom of the expansion region first increases and then decreases.In addition,the effect of the magnetic filter is examined.It is noteworthy that a significant increase in the H^(-) density is observed when the magnetic filter is introduced.As the permanent magnets move towards the driver region,the H^(-) density decreases monotonically and the asymmetry is enhanced.This study contributes to the understanding of H-distribution under various conditions and facilitates the optimization of volume production of negative hydrogen ions in the NHIS.
