To investigate the influence of the activated carbon pore structure on the adsorption of volatile organic compounds （VOCs）, three commercial activated carbon samples were chosen. The fixed-bed thermostatic adsorptio...To investigate the influence of the activated carbon pore structure on the adsorption of volatile organic compounds （VOCs）, three commercial activated carbon samples were chosen. The fixed-bed thermostatic adsorption experiments were conducted under certain conditions, where toluene, acetone, and 1, 2-dichloroethane acted as adsorbents. Then, the incidence relation between the experimental results and the activated carbon pore structure was analyzed. After that, the results of the correlation analysis were verified in accordance with fractal theory and adsorption characteristic curve analysis. The results show that the pore diameter gradient is helpful for strengthening the intemal diffusion. Under the same condition, the adsorption of organic gases tends to be selective, and the positions of toluene, acetone and 1, 2-dichloroethane adsorbed on the activated carbon are mainly in the ranges of 1.27-1.49 nm, 0.67-0.84 nm and 1.39-1.75 nm, respectively. The relationship between adsorption capacity and activated carbon pore volume can accurately explain the spreading process of the adsorbents in the activated carbon.展开更多
A novel 0.1% Pd-0.05% （mass fraction） Pt/stainless steel wire mesh catalyst was prepared for volatile organic compounds （VOCs） elimination. The catalyst was synthesized by stainless steel wire mesh as support and ...A novel 0.1% Pd-0.05% （mass fraction） Pt/stainless steel wire mesh catalyst was prepared for volatile organic compounds （VOCs） elimination. The catalyst was synthesized by stainless steel wire mesh as support and then treated by anodic oxidation technology to develop a porous membrane on the support. During the anodic oxidation process, various electrolytes were used to investigate the formation of porous membrane. And the catalytic performance of the catalysts was tested by using toluene and acetone combustion as model reaction. The temperatures of complete toluene and acetone conversion were decreased to 180℃ and 240 ℃, respectively. The morphologies of the stainless steel wire mesh supports and catalysts were characterized by means of scanning electron microscopy （SEM） and temperature-programmed reduction （TPR）.展开更多
基金Projects(20976200)supported by the National Natural Science Foundation of China
文摘To investigate the influence of the activated carbon pore structure on the adsorption of volatile organic compounds （VOCs）, three commercial activated carbon samples were chosen. The fixed-bed thermostatic adsorption experiments were conducted under certain conditions, where toluene, acetone, and 1, 2-dichloroethane acted as adsorbents. Then, the incidence relation between the experimental results and the activated carbon pore structure was analyzed. After that, the results of the correlation analysis were verified in accordance with fractal theory and adsorption characteristic curve analysis. The results show that the pore diameter gradient is helpful for strengthening the intemal diffusion. Under the same condition, the adsorption of organic gases tends to be selective, and the positions of toluene, acetone and 1, 2-dichloroethane adsorbed on the activated carbon are mainly in the ranges of 1.27-1.49 nm, 0.67-0.84 nm and 1.39-1.75 nm, respectively. The relationship between adsorption capacity and activated carbon pore volume can accurately explain the spreading process of the adsorbents in the activated carbon.
基金Project(2009C21001)supported by the Science and Technology Program of Zhejiang Province,China
文摘A novel 0.1% Pd-0.05% （mass fraction） Pt/stainless steel wire mesh catalyst was prepared for volatile organic compounds （VOCs） elimination. The catalyst was synthesized by stainless steel wire mesh as support and then treated by anodic oxidation technology to develop a porous membrane on the support. During the anodic oxidation process, various electrolytes were used to investigate the formation of porous membrane. And the catalytic performance of the catalysts was tested by using toluene and acetone combustion as model reaction. The temperatures of complete toluene and acetone conversion were decreased to 180℃ and 240 ℃, respectively. The morphologies of the stainless steel wire mesh supports and catalysts were characterized by means of scanning electron microscopy （SEM） and temperature-programmed reduction （TPR）.
