Two modifications for the basic Barcelona model(BBM) are present. One is the replacement of the net stress by the average skeleton stress in unsaturated soil modeling, and the other is the adoption of an expression fo...Two modifications for the basic Barcelona model(BBM) are present. One is the replacement of the net stress by the average skeleton stress in unsaturated soil modeling, and the other is the adoption of an expression for the load-collapse(LC) yield surface that can match flexibly the normal compression lines at different suctions. The predictions of the modified BBM for the controlled-suction triaxial test on the unsaturated compacted clay are presented and compared with the experimental results. A good agreement between the predicted and experimental results demonstrates the reasonability of the modified BBM. On this basis, the coupled processes of groundwater flow and soil deformation in a homogeneous soil slope under a long heavy rainfall are simulated with the proposed elasto-plastic model. The numerical results reveal that the failure of a slope under rainfall infiltration is due to both the reduction of soil suction and the significant rise in groundwater table. The evolution of the displacements is greatly related to the change of suction. The maximum collapse deformation happens near the surface of slope where infiltrated rainwater can quickly reach. The results may provide a helpful reference for hazard assessment and control of rainfall-induced landslides.展开更多
Rainfall, as one of the most significant factors triggering the residual soil slope failure, leads to not only the reduction of soil shear strength, but also the increase of soil weight and the decrease of matric suct...Rainfall, as one of the most significant factors triggering the residual soil slope failure, leads to not only the reduction of soil shear strength, but also the increase of soil weight and the decrease of matric suction as well. All these modifications in soil properties have important influence on the slope stability. The water infiltration and redistribution inside the slope are the preconditions of the slope stability under rainfall conditions. Based on the numerical simulation via finite element method, the water infiltration process under rainfall conditions was studied in the present work. The emphases are the formation, distribution and dissipation of transient saturated zone. As for the calculation parameters, the SWCC and the saturated permeability have been determined by pressure plate test and variable head test respectively. The entire process(formation, development, dissipation) of the transient saturated zone was studied in detail. The variations of volumetric water content, matric suction and hydraulic gradient inside the slope, and the eventually raise of groundwater table were characterized and discussed, too. The results show that the major cause of the formation of transient saturated zone is ascribed to the fact that the exudation velocity of rainwater on the wetting front is less than the infiltration velocity of rainfall; as a result, the water content of the soil increases. On the other hand, the formation and extension of transient saturated zone have a close relationship with rainfall intensity and duration. The results can help the geotechnical engineers for the deeper understanding of the failure of residual slope under rainfall condition. It is also suggested that the proper drainage system in the slope may be the cost-effective slope failure mitigation method.展开更多
In order to study the safety factor and instability process of cohesive soil slope, the discrete element method(DEM) was applied. DEM software PFC2 D was used to simulate the triaxial test to study the influence of th...In order to study the safety factor and instability process of cohesive soil slope, the discrete element method(DEM) was applied. DEM software PFC2 D was used to simulate the triaxial test to study the influence of the particle micro parameters on the macroscopic characteristics of cohesive soil and calibrate the micro parameters of DEM model on this basis. Embankment slope stability analysis was carried out by strength reduction and gravity increase method, it is shown that the safety factor obtained by strength reduction method is more conservative, and the arc-shaped feature of the sliding surface under the gravity increase method is more obvious. Throughout the progressive failure process, the failure trends, maximum displacements, and velocity changes obtained by the two methods were consistent. When slope was destroyed, the upper part was cracked, the middle part was sheared, and the lower part was destroyed by extrusion. The conclusions of this paper can be applied to the safety factor calculation of cohesive soil slopes and the analysis of the instability process.展开更多
Soils are actually unsaturated in nature. In the present study, a stability analysis of a geosynthetic-reinforced slope in unsaturated soils subjected to various steady flow conditions is conducted based on limit anal...Soils are actually unsaturated in nature. In the present study, a stability analysis of a geosynthetic-reinforced slope in unsaturated soils subjected to various steady flow conditions is conducted based on limit analysis. Work rate by apparent cohesion due to matric suction is calculated based on the effective stress-based equation. Analytical expression of the required cohesion/stability number of slope is derived from the energy balance equation. An optimization code is programmed to capture the optimized solution of the stability number. Comparison is made to verify the present work and a parametric analysis is conducted to investigate the effects of soil type, infilitration rate, reinforcement strength and soil suction on slope stability afterwards. A set of numerical solutions is presented at the end of the paper for preliminary design purposes.展开更多
Most of the natural and compacted fine-grained soil slopes that are in saturated or unsaturated condition undergo a large deformation prior to reaching failure conditions.Such slopes should be designed taking account ...Most of the natural and compacted fine-grained soil slopes that are in saturated or unsaturated condition undergo a large deformation prior to reaching failure conditions.Such slopes should be designed taking account of their strain-softening behavior using the residual shear strength (RSS) parameters.In this paper,the slope stability of a recently reactivated Outang landslide near the Three Gorges Dam in China is analyzed based on the RSS parameters of unsaturated soils.In addition,comparisons are provided in the FOS values of slope using both the peak shear strength (PSS) and RSS parameters.Firstly,a series of site investigations of the hydrologic and geologic conditions,ground surface displacements and cracks were described.The PSS and RSS behaviors of the sliding soils derived from a series of direct shear test results performed on saturated and unsaturated soil specimens are summarized.Secondly,a series of slope stability analysis were conducted considering the precipitation and Yangtze River water level variation within a representative period of 7 months,based on the PSS and the RSS properties.In this study,three different scenarios were considered,which include: i) considering only the precipitation with a constant water level;ii) considering only the decrease in water level without rainfall;iii) considering the combination of precipitation and decrease in water level.In each scenario,four steps were included to calculate the values of factor of safety (FOS) at different times.1) A steady-state seepage analysis was conducted with a constant total head at 525 m on the left boundary and 175 m on the slope surface below the Yangtze River water level.The initial pore water pressures were simulated in the slope under no precipitation and variation of water level.2) A specific boundary condition was applied on the slope surface to model the precipitation and Yangtze River water level variation.A transient seepage analysis was conducted to calculate pore water pressures at different times based on the initial pore water pressures.3) The FOS values at different times were calculated by the Morgenstern-Price method taking account of the variation of pore water pressures at different times,using the peak shear strength (PSS) parameters.4) The last step was repeated replacing PSS parameters with RSS parameters.The RSS parameters were lower than the peak values from laboratory’s direct shear test results for the soils in the sliding zones.The reduction in shear strength from peak to residual state under unsaturated soil condition was greater than that for a saturated soil.The FOS decreased almost linearly with time for the scenario in which only the influence of rainfall infiltration was considered.However,the total reduction in the FOS was relatively small.The FOS decreased rapidly at a linear rate with respect to time with a decrease in water level for the scenario in which Yangtze River water level decrease was considered.The FOS reached to a relatively constant value after Yangtze River water level reached the lowest value.The decrease in Yangtze River water level was the dominant factor that contributed to a reduction in the FOS.The FOS was strongly dependent on the development of the phreatic line after the Yangtze River water level reached the lowest value.The FOS calculated by RSS (i.e.FOSR) is less than unity;they were approximately 16% lower in comparison to that calculated by PSS (FOSP).If PSS parameters were used,the slope would still be stable even under the combined influence of precipitation and Yangtze River water level decrease.These results are inconsistent with the field observations.For this reason,the RSS parameters should be taken into account to evaluate reliably the slope stability of the Outang landslide.展开更多
基金Project(1301015A)supported by the Post-doctoral Research Fund of Jiangsu Province,ChinaProject Funded by the Priority Academic Program of Jiangsu Higher Education Institution,China+1 种基金Project(2014M561566)supported by China Postdoctoral Science FoundationProject(YK913007)supported by Key Laboratory of Earth-Rock Dam Failure Mechanism and Safety Control Technologies,China
文摘Two modifications for the basic Barcelona model(BBM) are present. One is the replacement of the net stress by the average skeleton stress in unsaturated soil modeling, and the other is the adoption of an expression for the load-collapse(LC) yield surface that can match flexibly the normal compression lines at different suctions. The predictions of the modified BBM for the controlled-suction triaxial test on the unsaturated compacted clay are presented and compared with the experimental results. A good agreement between the predicted and experimental results demonstrates the reasonability of the modified BBM. On this basis, the coupled processes of groundwater flow and soil deformation in a homogeneous soil slope under a long heavy rainfall are simulated with the proposed elasto-plastic model. The numerical results reveal that the failure of a slope under rainfall infiltration is due to both the reduction of soil suction and the significant rise in groundwater table. The evolution of the displacements is greatly related to the change of suction. The maximum collapse deformation happens near the surface of slope where infiltrated rainwater can quickly reach. The results may provide a helpful reference for hazard assessment and control of rainfall-induced landslides.
基金Projects(51508040,51578079,51678074,51678073)supported by the National Natural Science Foundation of ChinaProject(KFJ160601)supported by the Open Fund of Engineering Laboratory of Spatial Information Technology of Highway Geological Disaster Early Warning in Hunan Province(Changsha University of Science and Technology),China
文摘Rainfall, as one of the most significant factors triggering the residual soil slope failure, leads to not only the reduction of soil shear strength, but also the increase of soil weight and the decrease of matric suction as well. All these modifications in soil properties have important influence on the slope stability. The water infiltration and redistribution inside the slope are the preconditions of the slope stability under rainfall conditions. Based on the numerical simulation via finite element method, the water infiltration process under rainfall conditions was studied in the present work. The emphases are the formation, distribution and dissipation of transient saturated zone. As for the calculation parameters, the SWCC and the saturated permeability have been determined by pressure plate test and variable head test respectively. The entire process(formation, development, dissipation) of the transient saturated zone was studied in detail. The variations of volumetric water content, matric suction and hydraulic gradient inside the slope, and the eventually raise of groundwater table were characterized and discussed, too. The results show that the major cause of the formation of transient saturated zone is ascribed to the fact that the exudation velocity of rainwater on the wetting front is less than the infiltration velocity of rainfall; as a result, the water content of the soil increases. On the other hand, the formation and extension of transient saturated zone have a close relationship with rainfall intensity and duration. The results can help the geotechnical engineers for the deeper understanding of the failure of residual slope under rainfall condition. It is also suggested that the proper drainage system in the slope may be the cost-effective slope failure mitigation method.
基金Project(51808116) supported by the National Natural Science Foundation of ChinaProject(BK20180404) supported by the Natural Science Foundation of Jiangsu Province, China+1 种基金Project(KFJ170106) supported by the Changsha University of Science & Technology via Open Fund of National Engineering Laboratory of Highway Maintenance Technology,ChinaProject(242020R40133) supported by Fundamental Research Funds for the Central Universities, China。
文摘In order to study the safety factor and instability process of cohesive soil slope, the discrete element method(DEM) was applied. DEM software PFC2 D was used to simulate the triaxial test to study the influence of the particle micro parameters on the macroscopic characteristics of cohesive soil and calibrate the micro parameters of DEM model on this basis. Embankment slope stability analysis was carried out by strength reduction and gravity increase method, it is shown that the safety factor obtained by strength reduction method is more conservative, and the arc-shaped feature of the sliding surface under the gravity increase method is more obvious. Throughout the progressive failure process, the failure trends, maximum displacements, and velocity changes obtained by the two methods were consistent. When slope was destroyed, the upper part was cracked, the middle part was sheared, and the lower part was destroyed by extrusion. The conclusions of this paper can be applied to the safety factor calculation of cohesive soil slopes and the analysis of the instability process.
基金Project(2019M650011)supported by China Postdoctoral Science FoundationProject(51421005)supported by the Science Fund for Creative Research Groups of the National Natural Science Foundation of ChinaProject(2015CB057902)supported by the National Basic Research Program of China
文摘Soils are actually unsaturated in nature. In the present study, a stability analysis of a geosynthetic-reinforced slope in unsaturated soils subjected to various steady flow conditions is conducted based on limit analysis. Work rate by apparent cohesion due to matric suction is calculated based on the effective stress-based equation. Analytical expression of the required cohesion/stability number of slope is derived from the energy balance equation. An optimization code is programmed to capture the optimized solution of the stability number. Comparison is made to verify the present work and a parametric analysis is conducted to investigate the effects of soil type, infilitration rate, reinforcement strength and soil suction on slope stability afterwards. A set of numerical solutions is presented at the end of the paper for preliminary design purposes.
文摘Most of the natural and compacted fine-grained soil slopes that are in saturated or unsaturated condition undergo a large deformation prior to reaching failure conditions.Such slopes should be designed taking account of their strain-softening behavior using the residual shear strength (RSS) parameters.In this paper,the slope stability of a recently reactivated Outang landslide near the Three Gorges Dam in China is analyzed based on the RSS parameters of unsaturated soils.In addition,comparisons are provided in the FOS values of slope using both the peak shear strength (PSS) and RSS parameters.Firstly,a series of site investigations of the hydrologic and geologic conditions,ground surface displacements and cracks were described.The PSS and RSS behaviors of the sliding soils derived from a series of direct shear test results performed on saturated and unsaturated soil specimens are summarized.Secondly,a series of slope stability analysis were conducted considering the precipitation and Yangtze River water level variation within a representative period of 7 months,based on the PSS and the RSS properties.In this study,three different scenarios were considered,which include: i) considering only the precipitation with a constant water level;ii) considering only the decrease in water level without rainfall;iii) considering the combination of precipitation and decrease in water level.In each scenario,four steps were included to calculate the values of factor of safety (FOS) at different times.1) A steady-state seepage analysis was conducted with a constant total head at 525 m on the left boundary and 175 m on the slope surface below the Yangtze River water level.The initial pore water pressures were simulated in the slope under no precipitation and variation of water level.2) A specific boundary condition was applied on the slope surface to model the precipitation and Yangtze River water level variation.A transient seepage analysis was conducted to calculate pore water pressures at different times based on the initial pore water pressures.3) The FOS values at different times were calculated by the Morgenstern-Price method taking account of the variation of pore water pressures at different times,using the peak shear strength (PSS) parameters.4) The last step was repeated replacing PSS parameters with RSS parameters.The RSS parameters were lower than the peak values from laboratory’s direct shear test results for the soils in the sliding zones.The reduction in shear strength from peak to residual state under unsaturated soil condition was greater than that for a saturated soil.The FOS decreased almost linearly with time for the scenario in which only the influence of rainfall infiltration was considered.However,the total reduction in the FOS was relatively small.The FOS decreased rapidly at a linear rate with respect to time with a decrease in water level for the scenario in which Yangtze River water level decrease was considered.The FOS reached to a relatively constant value after Yangtze River water level reached the lowest value.The decrease in Yangtze River water level was the dominant factor that contributed to a reduction in the FOS.The FOS was strongly dependent on the development of the phreatic line after the Yangtze River water level reached the lowest value.The FOS calculated by RSS (i.e.FOSR) is less than unity;they were approximately 16% lower in comparison to that calculated by PSS (FOSP).If PSS parameters were used,the slope would still be stable even under the combined influence of precipitation and Yangtze River water level decrease.These results are inconsistent with the field observations.For this reason,the RSS parameters should be taken into account to evaluate reliably the slope stability of the Outang landslide.
