The double fire two stage method of underground coal gasification was suggested. On the basis of material balance, the ideal gasification parameters were calculated, and the field test process was briefly introduced. ...The double fire two stage method of underground coal gasification was suggested. On the basis of material balance, the ideal gasification parameters were calculated, and the field test process was briefly introduced. In addition, the cause for a middle to a high heat value of water gas was described. And the reasonableness and feasiblity of the method was proved, showing that the double fire two stage gasification is an important technique for commercialized production.展开更多
In situ coal gasification poses a potential environmental risk to groundwater pollution although it depends mainly on local hydrogeological conditions. In our investigation,the possible processes of groundwater pollut...In situ coal gasification poses a potential environmental risk to groundwater pollution although it depends mainly on local hydrogeological conditions. In our investigation,the possible processes of groundwater pollution origi-nating from underground coal gasification (UCG) were analyzed. Typical pollutants were identified and pollution con-trol measures are proposed. Groundwater pollution is caused by the diffusion and penetration of contaminants generated by underground gasification processes towards surrounding strata and the possible leaching of underground residue by natural groundwater flow after gasification. Typical organic pollutants include phenols,benzene,minor components such as PAHs and heterocyclics. Inorganic pollutants involve cations and anions. The natural groundwater flow after gasification through the seam is attributable to the migration of contaminants,which can be predicted by mathematical modeling. The extent and concentration of the groundwater pollution plume depend primarily on groundwater flow ve-locity,the degree of dispersion and the adsorption and reactions of the various contaminants. The adsorption function of coal and surrounding strata make a big contribution to the decrease of the contaminants over time and with the distance from the burn cavity. Possible pollution control measures regarding UCG include identifying a permanently,unsuitable zone,setting a hydraulic barrier and pumping contaminated water out for surface disposal. Mitigation measures during gasification processes and groundwater remediation after gasification are also proposed.展开更多
Two-stage underground coal gasification was studied to improve the caloric value of the syngas and to extend gas production times.A model test using the oxygen-enriched two-stage coal gasification method was carried o...Two-stage underground coal gasification was studied to improve the caloric value of the syngas and to extend gas production times.A model test using the oxygen-enriched two-stage coal gasification method was carried out.The composition of the gas produced,the time ratio of the two stages,and the role of the temperature field were analysed.The results show that oxygen-enriched two-stage gasification shortens the time of the first stage and prolongs the time of the second stage.Feed oxygen concentrations of 30%, 35%,40%,45%.60%,or 80%gave time ratios（first stage to second stage） of 1：0.12,1：0.21.1：0.51,1：0.64, 1：0.90.and 1：4.0 respectively.Cooling rates of the temperature field after steam injection decreased with time from about 19.1-27.4℃/min to 2.3-6.8℃/min.But this rate increased with increasing oxygen concentrations in the first stage.The caloric value of the syngas improves with increased oxygen concentration in the first stage.Injection of 80%oxygen-enriched air gave gas with the highest caloric value and also gave the longest production time.The caloric value of the gas obtained from the oxygenenriched two-stage gasification method lies in the range from 5.31 MJ/Nm^3 to 10.54 MJ/Nm^3.展开更多
To master theoretical calculation for dust removal efficiency of high pressure atomization in an underground coal mine, the corresponding atomization characteristics and dust removal efficiency were both comprehensive...To master theoretical calculation for dust removal efficiency of high pressure atomization in an underground coal mine, the corresponding atomization characteristics and dust removal efficiency were both comprehensively studied in theory by virtue of related theories of hydromechanics and aerosol.According to actual measurements of flow coefficients and atomization angles of X-type swirl nozzle,computational formula was derived for atomized particle sizes of such a nozzle in conjunction with relevant empirical equation. Moreover, a mathematical model for applying high pressure atomization to dust removal in underground coal mine was also established to deduce theoretical computation formula of fractional efficiency. Then, Matlab was adopted to portray the relation curve between fractional efficiency and influence factors. In addition, a theoretical formula was also set up for removal efficiency of respirable dust and total coal dust based on dust size and frequency distribution equations. In the end,impacts of dust characteristic parameters on various dust removal efficiencies were analyzed.展开更多
From an analysis of the status of coal mine underground wireless communication, the application of UWB wireless communication system to underground coal mine is proposed. The basic composition of an UWB communication ...From an analysis of the status of coal mine underground wireless communication, the application of UWB wireless communication system to underground coal mine is proposed. The basic composition of an UWB communication system and application in underground coal mines are introduced. The analyses show that, because of the transmission power being non-limitted in underground coal mines, the use of UWB in coal mines cannot only realize wireless access services of short distance high rate application for transmission of video monitoring signals, but also realize wireless access services of long distance low rate applications for mobile telephones in underground coal mines and parameters of working conditions monitoring, etc. It is emphasized on the simulation of a TH-PPM UWB communication system with traditional underground broadband model and ground CM1, CM3 model. It is shown that the traditional underground broadband model and ground CM1, CM3 models are not applicable to the UWB communication system in underground coal mines. It is necessary to conduct research on the propagation characteristics of UWB in coal mine tunnels, given the characteristics of the underground environment and to find the appropriate UWB model for underground coal mines.展开更多
Underground coal gasification （UCG） is one of the clean technologies to collect heat energy and gases （hydrogen, methane, etc.） in an underground coal seam. It is necessary to further developing environ- mentally ...Underground coal gasification （UCG） is one of the clean technologies to collect heat energy and gases （hydrogen, methane, etc.） in an underground coal seam. It is necessary to further developing environ- mentally friendly UCG system construction. One of the most important UCG＇s problems is underground control of combustion area for efficient gas production, estimation of subsidence and gas leakage to the surface. For this objective, laboratory experiments were conducted according to the UCG model to iden- ti[y the process of combustion cavity development by monitoring the electrical resistivity activity on the coal samples to setup fundamental data for the technology engineering to evaluate combustion area. While burning coal specimens, that had been sampled from various coal deposits, electrical resistivity was monitored. Symmetric four electrodes system （ABMN） of direct and low-frequency current electric resistance method was used for laboratory resistivity measurement of rock samples. Made research and the results suggest that front-end of electro conductivity activity during heating and combusting of coal specimen depended on heating temperature. Combusting coal electro conductivity has compli- cated multistage type of change. Electrical resistivity method is expected to be a useful geophysical tool to for evaluation of combustion volume and its migration in the coal seam.展开更多
Based on the quasi-steady-state approximation, the dynamic equation of char combustion in the oxidation zone of underground coal gasification (UCG) was derived. The parameters of the dynamic equation were determined a...Based on the quasi-steady-state approximation, the dynamic equation of char combustion in the oxidation zone of underground coal gasification (UCG) was derived. The parameters of the dynamic equation were determined at 900℃ using a thermo-gravimetric (TG) analyzer connected to a flue gas analyzer and this equation. The equation was simplified for specific coals, including high ash content, low ash content, and low ash fusibility ones. The results show that 1) the apparent reaction rate constant increases with an increase in volatile matter value as dry ash-free basis,2) the effective coefficient of diffusion decreases with an increase in ash as dry basis, and 3) the mass transfer coefficient is independent of coal quality on the whole. The apparent reaction rate constant, mass-transfer coefficient and effective coefficient of diffusion of six char samples range from 7.51×104 m/s to 8.98×104 m/s, 3.05×106 m/s to 3.23×106 m/s and 5.36×106 m2/s to 8.23×106 m2/s at 900℃, respectively.展开更多
To define the diffusion behavior of harmful exhaust substances from diesel vehicles and support safety risk assessments of underground coal mines,we performed a multi-species coupling calculation of the emission and d...To define the diffusion behavior of harmful exhaust substances from diesel vehicles and support safety risk assessments of underground coal mines,we performed a multi-species coupling calculation of the emission and diffusion of harmful substances from a trackless rubber-wheel diesel vehicle.A computational fluid dynamics(CFD)model of the diffusion of harmful emissions was hence established and verified.From the perspective of risk analysis,the diffusion behavior and distribution of hazardous substances emitted by the diesel vehicle were studied under 4 different conditions;moreover,we identified areas characterized by hazardous levels of emissions.When the vehicle idled upwind in the roadway,high-risk areas formed behind and to the right of the vehicle:particularly high concentrations of pollutants were measured near the rear floor of the vehicle and within 5 m behind the vehicle.When the vehicle idled downwind,high-risk areas formed in front of it:particularly high concentrations of pollutants were measured near the floor and within 5 m from the front of the vehicle.In the above cases,the driver would not breathe highly polluted air and would be relatively safe.When the vehicle idled into the chamber,however,high-risk areas formed on both sides of the vehicle and near the upper roof.Forward entry of the vehicle caused a greater increase in the concentration of pollutants in the chamber and in the driver’s breathing zone compared with reverse entry.展开更多
The exact shape and size of the gasification channel during underground coal gasification(UGC) are of vital importance for the safety and stability of the upper parts of the geological formation.In practice existing g...The exact shape and size of the gasification channel during underground coal gasification(UGC) are of vital importance for the safety and stability of the upper parts of the geological formation.In practice existing geological measurements are insufficient to obtain such information because the coal seam is typically deeply buried and the geological conditions are often complex.This paper introduces a cylindrical model for the gasification channel.The rock and soil masses are assumed to be homogeneous and isotropic and the effect of seepage on the temperature field was neglected.The theory of heat conduction was used to write the equation predicting the temperature field around the gasification channel.The idea of an excess temperature was introduced to solve the equations.Applying this model to UCG in the field for an influence radius,r,of 70 m gave the model parameters,u1,2,3...,of 2.4,5.5,8.7...By adjusting the radius(2,4,or 6 m) reasonable temperatures of the gasification channel were found for 4 m.The temperature distribution in the vertical direction,and the combustion volume,were also calculated.Comparison to field measurements shows that the results obtained from the proposed model are very close to practice.展开更多
The problem of the high-level processing of coal into synthetic motor fuels assumes worldwide actual meaning nowadays. Thereat, it is important especially for countries and regions which possess extensive coal resourc...The problem of the high-level processing of coal into synthetic motor fuels assumes worldwide actual meaning nowadays. Thereat, it is important especially for countries and regions which possess extensive coal resources and are forced to be guided by the import of liquid and gas hydrocarbons. However, a greater emphasis is paid to the given issue in Russia-The development of the federal program for highlevel processing of coal into synthetic motor fuels was initiated. This article describes options of underground coal gasification (UCG) use for the generation of hydrocarbons from UCG gas in the process of the Fischer-Tropsch synthesis (FTS). The technical and economic analysis of the integrated UCG-FTS powerchemical factories has detected their investment attractiveness and practicability of experimental-industrial testing at coal deposits of the Russian Federation.展开更多
We studied underground pressure and its mechanism during back-gully mining in a shallow coal seam under a bedrock gully slope,by means of physical simulation,numerical modeling and field monitoring.The results show th...We studied underground pressure and its mechanism during back-gully mining in a shallow coal seam under a bedrock gully slope,by means of physical simulation,numerical modeling and field monitoring.The results show that the intensity of underground pressure is related to its relative position at the coalface.The underground pressure is intensive and the support resistance reaches a maximum when the coalface is at the bottom of the gully,whereas the underground pressure is moderate and decreases gradually when the coalface passes the gully.The mechanism of these changes is analyzed when the slope rotated in a reversed direction to the slope dip during back-gully mining and form an unstable,multilateral block hinged structure,due to slipping.The subsidence of multilateral blocks is considerable when the block fragmentation is small,resulting in enormous changes in the underground pressure.With an increase in the mass of the block body,the block displacement will be reduced in conjunction with an increased clamp effect by both the unbroken rocks and broken rocks in the goaf,resulting in a decrease of the underground pressure.展开更多
A coal burst occurred on 15 April, 2014 at the Austar Coal Mine, located west of Newcastle, NSW,Australia. The burst resulted in fatal injuries to two men working as part of the mining crew at the development face. At...A coal burst occurred on 15 April, 2014 at the Austar Coal Mine, located west of Newcastle, NSW,Australia. The burst resulted in fatal injuries to two men working as part of the mining crew at the development face. At the time, a continuous miner was being used to mine a longwall development gate road through heavily structured coal, at a depth of approximately 550 m. A number of pre-cursor bumps had occurred on previous shifts, emanating from the coal ribs of the roadway, in proximity to the coal face.This paper reviews the geological, geotechnical and mining conditions and circumstances leading up to the coal burst event; and presents and discusses the available evidence and possible interpretations relating to the geomechanical behaviour mechanisms that may have been critical factors in this incident. The paper also discusses some key technical and operational considerations of ground support systems and mining practices and strategies needed for operating in such conditions in the future.展开更多
Underground coal gasification is one of the clean technologies of in-situ coal utilization.Hydrogen production from underground gasification of lignite was investigated in this study based on simulation experiments.Py...Underground coal gasification is one of the clean technologies of in-situ coal utilization.Hydrogen production from underground gasification of lignite was investigated in this study based on simulation experiments.Pyrolysis of lignite, gasification activity, oxygen-steam gasification and the effect of groundwater influx were studied.As well, the advantages of lignite for stable underground gasification were analyzed.The results indicate that lignite has a high activity for gasification.Coal pyrolysis is an important source of hydrogen emission.Under special heating conditions, hydrogen is released from coal seams at temperatures above 350 °C and reaches its maximum value between 725 and 825 °C.Gas with a hydrogen concentration of 40% to 50% can be continuously obtained by oxygen-steam injection at an optimum ratio of steam to oxygen, while lignite properties will ensure stable gasification.Groundwater influx can be utilized for hydrogen preparation under certain geological conditions through pressure control.Therefore, enhanced-hydrogen gas production through underground gasification of lignite has experimentally been proved.展开更多
In this article an attempt to determine the influence of mining factors on the seismic activity during the longwall mining of the upper layer of coal seam no.405/2 in one of the Polish hard coal mines in the Upper Sil...In this article an attempt to determine the influence of mining factors on the seismic activity during the longwall mining of the upper layer of coal seam no.405/2 in one of the Polish hard coal mines in the Upper Silesian Coal Basin was conducted.Two longwall panels were mined in analogous geological conditions and based on the same mining system and technology.However,there was significant difference with regards to the mining factors,which was reflected in the observed seismic activity.Some tools used in mining seismology were applied to illustrate the aforementioned influence of mining factors,e.g.the frequency-energy distribution,the frequency-magnitude distribution,the 2 D distribution of released seismic energy,the relationship between released seismic energy and the volume of mined coal,the Benioff strain release,and the Gutenberg-Richter(GR)b coefficient distribution(b is the proportion between high and low energy tremors).Concerning the Benioff strain release,a new solution,based on the slope of a fitted line in a moving time window,is proposed.展开更多
The global trends of increasing oil and gas costs have compelled coal possessing countries to start long term underground coal gasification （UCG） projects. These enhance national energy security and are among the cl...The global trends of increasing oil and gas costs have compelled coal possessing countries to start long term underground coal gasification （UCG） projects. These enhance national energy security and are among the cleanest, ecologically safest coal utilization technologies. This paper delineates the major characteristics of such technologies and analyzes technical solutions. Highlighting the desire to develop large scale industrial UCG plants, pilot level projects are presented using a new UCG method developed in Russia by Joint Stock Company Gazprom Promgaz. This method is distinct for its high controllability, stability, and energy efficiency. New, efficient technical solutions have been developed over the last 10-15 years and are patented in Russia. They guarantee controllability and stability of UCG gas produc- tion. Over one hundred iniection and gas production wells have been operated simultaneously.展开更多
Coal seam pyrolysis occurs during coal seam fires and during underground coal gasification. This is an important source of polycyclic aromatic hydrocarbon （PAH） emission in China. Pyrolysis in a coal seam was simula...Coal seam pyrolysis occurs during coal seam fires and during underground coal gasification. This is an important source of polycyclic aromatic hydrocarbon （PAH） emission in China. Pyrolysis in a coal seam was simulated in a tubular furnace. The 16 US Environmental Protection Agency priority controlled PAHs were analyzed by HPLC. The effects of temperature, heating rate, pyrolysis atmosphere, and coal size were investigated. The results indicate that the 3-ring PAHs AcP and AcPy are the main species in the pyrolysis gas. The 2-ring NaP and the 4-ring Pyr are also of concern. Increasing temperature caused the total PAH yield to go through a minimum. The lowest value was obtained at the temperature of 600℃. Higher heating rates promote PAH formation, especially formation of the lower molecular weight PAHs. The typical heating rate in a coal seam, 5 ℃/min, results in intermediate yields of PAHs. The total PAHs yield in an atmosphere of N2 is about 1.81 times that seen without added N2, which indicates that an air flow through the coal seam accelerates the formation of PAHs. An increase in coal particle size reduces the total PAHs emission but promotes the formation of 5- and f-ring PAHs.展开更多
Ground subsidence induced by extraction of coal seam belowground brings about changes in surface environment leading to trough and pot-hole subsidence.Pot-hole subsidence is extremely hazardous and does not give any p...Ground subsidence induced by extraction of coal seam belowground brings about changes in surface environment leading to trough and pot-hole subsidence.Pot-hole subsidence is extremely hazardous and does not give any prior indication before its occurrence.In India,several pot-holes have occurred in the coal mines of South Eastern Coalfields Limited triggering the need for in-depth studies.In line with the requirement,literature review and field investigations were conducted to develop an in-depth understanding of various parameters influencing the occurrence of pot-holes.The critical parameters identified were rock to soil ratio,depth to height of extraction ratio,brittleness index of rock and rock density.Risk assessment of pot-hole subsidence has been done by developing an empirical rating approach named as pot-hole subsidence rating(PHSR),involving the critical parameters with suitable corrections for certain structural and mining conditions to obtain corrected PHSR(CPHSR).CPHSR was then applied for all the 34pot-holes studied and it was found that all the pot-holes fall under Class I and Class II category of risk representing a very high to high risk class.An effort was made for the estimation of pot-hole depth utilizing the developed CPHSR in both the development and depillaring cases.The developed approach was found to yield consistent results in pot-hole depth prediction.展开更多
基金Supported by National Natural Science Foundation of China(5 990 60 14 )
文摘The double fire two stage method of underground coal gasification was suggested. On the basis of material balance, the ideal gasification parameters were calculated, and the field test process was briefly introduced. In addition, the cause for a middle to a high heat value of water gas was described. And the reasonableness and feasiblity of the method was proved, showing that the double fire two stage gasification is an important technique for commercialized production.
基金Projects 20207014 and 50674084 supported by the National Natural Science Foundation of China
文摘In situ coal gasification poses a potential environmental risk to groundwater pollution although it depends mainly on local hydrogeological conditions. In our investigation,the possible processes of groundwater pollution origi-nating from underground coal gasification (UCG) were analyzed. Typical pollutants were identified and pollution con-trol measures are proposed. Groundwater pollution is caused by the diffusion and penetration of contaminants generated by underground gasification processes towards surrounding strata and the possible leaching of underground residue by natural groundwater flow after gasification. Typical organic pollutants include phenols,benzene,minor components such as PAHs and heterocyclics. Inorganic pollutants involve cations and anions. The natural groundwater flow after gasification through the seam is attributable to the migration of contaminants,which can be predicted by mathematical modeling. The extent and concentration of the groundwater pollution plume depend primarily on groundwater flow ve-locity,the degree of dispersion and the adsorption and reactions of the various contaminants. The adsorption function of coal and surrounding strata make a big contribution to the decrease of the contaminants over time and with the distance from the burn cavity. Possible pollution control measures regarding UCG include identifying a permanently,unsuitable zone,setting a hydraulic barrier and pumping contaminated water out for surface disposal. Mitigation measures during gasification processes and groundwater remediation after gasification are also proposed.
基金financial support of the National Natural Science Foundation of China(No.50876112)the Fundamental Research Funds for the Central Universities (No.2009QH13)the Program of International S&T Cooperation (No.2009DFR60180,No.2010DFR60610)
文摘Two-stage underground coal gasification was studied to improve the caloric value of the syngas and to extend gas production times.A model test using the oxygen-enriched two-stage coal gasification method was carried out.The composition of the gas produced,the time ratio of the two stages,and the role of the temperature field were analysed.The results show that oxygen-enriched two-stage gasification shortens the time of the first stage and prolongs the time of the second stage.Feed oxygen concentrations of 30%, 35%,40%,45%.60%,or 80%gave time ratios（first stage to second stage） of 1：0.12,1：0.21.1：0.51,1：0.64, 1：0.90.and 1：4.0 respectively.Cooling rates of the temperature field after steam injection decreased with time from about 19.1-27.4℃/min to 2.3-6.8℃/min.But this rate increased with increasing oxygen concentrations in the first stage.The caloric value of the syngas improves with increased oxygen concentration in the first stage.Injection of 80%oxygen-enriched air gave gas with the highest caloric value and also gave the longest production time.The caloric value of the gas obtained from the oxygenenriched two-stage gasification method lies in the range from 5.31 MJ/Nm^3 to 10.54 MJ/Nm^3.
基金Financial provided by the National Natural Science Foundation of China (Nos. 51574123 and U1361118)the China Postdoctoral Science Foundation (No. 2015M 582118)
文摘To master theoretical calculation for dust removal efficiency of high pressure atomization in an underground coal mine, the corresponding atomization characteristics and dust removal efficiency were both comprehensively studied in theory by virtue of related theories of hydromechanics and aerosol.According to actual measurements of flow coefficients and atomization angles of X-type swirl nozzle,computational formula was derived for atomized particle sizes of such a nozzle in conjunction with relevant empirical equation. Moreover, a mathematical model for applying high pressure atomization to dust removal in underground coal mine was also established to deduce theoretical computation formula of fractional efficiency. Then, Matlab was adopted to portray the relation curve between fractional efficiency and influence factors. In addition, a theoretical formula was also set up for removal efficiency of respirable dust and total coal dust based on dust size and frequency distribution equations. In the end,impacts of dust characteristic parameters on various dust removal efficiencies were analyzed.
基金Project OC4501 supported by the Scientific Research Fund of China University of Mining & Technology
文摘From an analysis of the status of coal mine underground wireless communication, the application of UWB wireless communication system to underground coal mine is proposed. The basic composition of an UWB communication system and application in underground coal mines are introduced. The analyses show that, because of the transmission power being non-limitted in underground coal mines, the use of UWB in coal mines cannot only realize wireless access services of short distance high rate application for transmission of video monitoring signals, but also realize wireless access services of long distance low rate applications for mobile telephones in underground coal mines and parameters of working conditions monitoring, etc. It is emphasized on the simulation of a TH-PPM UWB communication system with traditional underground broadband model and ground CM1, CM3 model. It is shown that the traditional underground broadband model and ground CM1, CM3 models are not applicable to the UWB communication system in underground coal mines. It is necessary to conduct research on the propagation characteristics of UWB in coal mine tunnels, given the characteristics of the underground environment and to find the appropriate UWB model for underground coal mines.
基金provided by the Ministry of EducationScience of Russian Federation (No. P1679),Far Eastern Federal University
文摘Underground coal gasification （UCG） is one of the clean technologies to collect heat energy and gases （hydrogen, methane, etc.） in an underground coal seam. It is necessary to further developing environ- mentally friendly UCG system construction. One of the most important UCG＇s problems is underground control of combustion area for efficient gas production, estimation of subsidence and gas leakage to the surface. For this objective, laboratory experiments were conducted according to the UCG model to iden- ti[y the process of combustion cavity development by monitoring the electrical resistivity activity on the coal samples to setup fundamental data for the technology engineering to evaluate combustion area. While burning coal specimens, that had been sampled from various coal deposits, electrical resistivity was monitored. Symmetric four electrodes system （ABMN） of direct and low-frequency current electric resistance method was used for laboratory resistivity measurement of rock samples. Made research and the results suggest that front-end of electro conductivity activity during heating and combusting of coal specimen depended on heating temperature. Combusting coal electro conductivity has compli- cated multistage type of change. Electrical resistivity method is expected to be a useful geophysical tool to for evaluation of combustion volume and its migration in the coal seam.
基金Projects 59906014, 50276066 and 20207014 supported by National Natural Science Foundation of China
文摘Based on the quasi-steady-state approximation, the dynamic equation of char combustion in the oxidation zone of underground coal gasification (UCG) was derived. The parameters of the dynamic equation were determined at 900℃ using a thermo-gravimetric (TG) analyzer connected to a flue gas analyzer and this equation. The equation was simplified for specific coals, including high ash content, low ash content, and low ash fusibility ones. The results show that 1) the apparent reaction rate constant increases with an increase in volatile matter value as dry ash-free basis,2) the effective coefficient of diffusion decreases with an increase in ash as dry basis, and 3) the mass transfer coefficient is independent of coal quality on the whole. The apparent reaction rate constant, mass-transfer coefficient and effective coefficient of diffusion of six char samples range from 7.51×104 m/s to 8.98×104 m/s, 3.05×106 m/s to 3.23×106 m/s and 5.36×106 m2/s to 8.23×106 m2/s at 900℃, respectively.
基金supported by the National Natural Science Foundation of China(Nos.52174191 and 51874191)the National Key R&D Program of China(No.2017YFC0805201)+1 种基金Qingchuang Science and Technology Project of Shandong Province University(No.2020KJD002)Taishan Scholars Project Special Funding(No.TS20190935).
文摘To define the diffusion behavior of harmful exhaust substances from diesel vehicles and support safety risk assessments of underground coal mines,we performed a multi-species coupling calculation of the emission and diffusion of harmful substances from a trackless rubber-wheel diesel vehicle.A computational fluid dynamics(CFD)model of the diffusion of harmful emissions was hence established and verified.From the perspective of risk analysis,the diffusion behavior and distribution of hazardous substances emitted by the diesel vehicle were studied under 4 different conditions;moreover,we identified areas characterized by hazardous levels of emissions.When the vehicle idled upwind in the roadway,high-risk areas formed behind and to the right of the vehicle:particularly high concentrations of pollutants were measured near the rear floor of the vehicle and within 5 m behind the vehicle.When the vehicle idled downwind,high-risk areas formed in front of it:particularly high concentrations of pollutants were measured near the floor and within 5 m from the front of the vehicle.In the above cases,the driver would not breathe highly polluted air and would be relatively safe.When the vehicle idled into the chamber,however,high-risk areas formed on both sides of the vehicle and near the upper roof.Forward entry of the vehicle caused a greater increase in the concentration of pollutants in the chamber and in the driver’s breathing zone compared with reverse entry.
基金supported by a grant from the Major State Basic Research and Development Program of China (No. 2007CB714102)sponsored by the Fundamental Research Funds for the Central Universities (No. 2009B00714)
文摘The exact shape and size of the gasification channel during underground coal gasification(UGC) are of vital importance for the safety and stability of the upper parts of the geological formation.In practice existing geological measurements are insufficient to obtain such information because the coal seam is typically deeply buried and the geological conditions are often complex.This paper introduces a cylindrical model for the gasification channel.The rock and soil masses are assumed to be homogeneous and isotropic and the effect of seepage on the temperature field was neglected.The theory of heat conduction was used to write the equation predicting the temperature field around the gasification channel.The idea of an excess temperature was introduced to solve the equations.Applying this model to UCG in the field for an influence radius,r,of 70 m gave the model parameters,u1,2,3...,of 2.4,5.5,8.7...By adjusting the radius(2,4,or 6 m) reasonable temperatures of the gasification channel were found for 4 m.The temperature distribution in the vertical direction,and the combustion volume,were also calculated.Comparison to field measurements shows that the results obtained from the proposed model are very close to practice.
文摘The problem of the high-level processing of coal into synthetic motor fuels assumes worldwide actual meaning nowadays. Thereat, it is important especially for countries and regions which possess extensive coal resources and are forced to be guided by the import of liquid and gas hydrocarbons. However, a greater emphasis is paid to the given issue in Russia-The development of the federal program for highlevel processing of coal into synthetic motor fuels was initiated. This article describes options of underground coal gasification (UCG) use for the generation of hydrocarbons from UCG gas in the process of the Fischer-Tropsch synthesis (FTS). The technical and economic analysis of the integrated UCG-FTS powerchemical factories has detected their investment attractiveness and practicability of experimental-industrial testing at coal deposits of the Russian Federation.
基金financial support for this work,provided by the National Natural Science Foundation of China(Nos.51004101 and 50904063)the Science Foundation for Young Scholars of China University of Mining & Technology(Nos.2008A003 and 2009A001 )the Graduate Student Scientific Research Innovation in the University of Jiangsu Province(No.CX07B_149z).
文摘We studied underground pressure and its mechanism during back-gully mining in a shallow coal seam under a bedrock gully slope,by means of physical simulation,numerical modeling and field monitoring.The results show that the intensity of underground pressure is related to its relative position at the coalface.The underground pressure is intensive and the support resistance reaches a maximum when the coalface is at the bottom of the gully,whereas the underground pressure is moderate and decreases gradually when the coalface passes the gully.The mechanism of these changes is analyzed when the slope rotated in a reversed direction to the slope dip during back-gully mining and form an unstable,multilateral block hinged structure,due to slipping.The subsidence of multilateral blocks is considerable when the block fragmentation is small,resulting in enormous changes in the underground pressure.With an increase in the mass of the block body,the block displacement will be reduced in conjunction with an increased clamp effect by both the unbroken rocks and broken rocks in the goaf,resulting in a decrease of the underground pressure.
文摘A coal burst occurred on 15 April, 2014 at the Austar Coal Mine, located west of Newcastle, NSW,Australia. The burst resulted in fatal injuries to two men working as part of the mining crew at the development face. At the time, a continuous miner was being used to mine a longwall development gate road through heavily structured coal, at a depth of approximately 550 m. A number of pre-cursor bumps had occurred on previous shifts, emanating from the coal ribs of the roadway, in proximity to the coal face.This paper reviews the geological, geotechnical and mining conditions and circumstances leading up to the coal burst event; and presents and discusses the available evidence and possible interpretations relating to the geomechanical behaviour mechanisms that may have been critical factors in this incident. The paper also discusses some key technical and operational considerations of ground support systems and mining practices and strategies needed for operating in such conditions in the future.
基金Projects 50876112 and 50674084 supported by the National Natural Science Foundation of China
文摘Underground coal gasification is one of the clean technologies of in-situ coal utilization.Hydrogen production from underground gasification of lignite was investigated in this study based on simulation experiments.Pyrolysis of lignite, gasification activity, oxygen-steam gasification and the effect of groundwater influx were studied.As well, the advantages of lignite for stable underground gasification were analyzed.The results indicate that lignite has a high activity for gasification.Coal pyrolysis is an important source of hydrogen emission.Under special heating conditions, hydrogen is released from coal seams at temperatures above 350 °C and reaches its maximum value between 725 and 825 °C.Gas with a hydrogen concentration of 40% to 50% can be continuously obtained by oxygen-steam injection at an optimum ratio of steam to oxygen, while lignite properties will ensure stable gasification.Groundwater influx can be utilized for hydrogen preparation under certain geological conditions through pressure control.Therefore, enhanced-hydrogen gas production through underground gasification of lignite has experimentally been proved.
文摘In this article an attempt to determine the influence of mining factors on the seismic activity during the longwall mining of the upper layer of coal seam no.405/2 in one of the Polish hard coal mines in the Upper Silesian Coal Basin was conducted.Two longwall panels were mined in analogous geological conditions and based on the same mining system and technology.However,there was significant difference with regards to the mining factors,which was reflected in the observed seismic activity.Some tools used in mining seismology were applied to illustrate the aforementioned influence of mining factors,e.g.the frequency-energy distribution,the frequency-magnitude distribution,the 2 D distribution of released seismic energy,the relationship between released seismic energy and the volume of mined coal,the Benioff strain release,and the Gutenberg-Richter(GR)b coefficient distribution(b is the proportion between high and low energy tremors).Concerning the Benioff strain release,a new solution,based on the slope of a fitted line in a moving time window,is proposed.
文摘The global trends of increasing oil and gas costs have compelled coal possessing countries to start long term underground coal gasification （UCG） projects. These enhance national energy security and are among the cleanest, ecologically safest coal utilization technologies. This paper delineates the major characteristics of such technologies and analyzes technical solutions. Highlighting the desire to develop large scale industrial UCG plants, pilot level projects are presented using a new UCG method developed in Russia by Joint Stock Company Gazprom Promgaz. This method is distinct for its high controllability, stability, and energy efficiency. New, efficient technical solutions have been developed over the last 10-15 years and are patented in Russia. They guarantee controllability and stability of UCG gas produc- tion. Over one hundred iniection and gas production wells have been operated simultaneously.
基金provided by the National Natural Science Foundation of China (No. 50876112)the Fundamental Research Funds for the Central Universities (No. 2009QH13)the International Scientific and Technological Cooperation Project(No. 2010DFR60610)
文摘Coal seam pyrolysis occurs during coal seam fires and during underground coal gasification. This is an important source of polycyclic aromatic hydrocarbon （PAH） emission in China. Pyrolysis in a coal seam was simulated in a tubular furnace. The 16 US Environmental Protection Agency priority controlled PAHs were analyzed by HPLC. The effects of temperature, heating rate, pyrolysis atmosphere, and coal size were investigated. The results indicate that the 3-ring PAHs AcP and AcPy are the main species in the pyrolysis gas. The 2-ring NaP and the 4-ring Pyr are also of concern. Increasing temperature caused the total PAH yield to go through a minimum. The lowest value was obtained at the temperature of 600℃. Higher heating rates promote PAH formation, especially formation of the lower molecular weight PAHs. The typical heating rate in a coal seam, 5 ℃/min, results in intermediate yields of PAHs. The total PAHs yield in an atmosphere of N2 is about 1.81 times that seen without added N2, which indicates that an air flow through the coal seam accelerates the formation of PAHs. An increase in coal particle size reduces the total PAHs emission but promotes the formation of 5- and f-ring PAHs.
基金Financial support for this work is provided by M/s SECL,CIL,India
文摘Ground subsidence induced by extraction of coal seam belowground brings about changes in surface environment leading to trough and pot-hole subsidence.Pot-hole subsidence is extremely hazardous and does not give any prior indication before its occurrence.In India,several pot-holes have occurred in the coal mines of South Eastern Coalfields Limited triggering the need for in-depth studies.In line with the requirement,literature review and field investigations were conducted to develop an in-depth understanding of various parameters influencing the occurrence of pot-holes.The critical parameters identified were rock to soil ratio,depth to height of extraction ratio,brittleness index of rock and rock density.Risk assessment of pot-hole subsidence has been done by developing an empirical rating approach named as pot-hole subsidence rating(PHSR),involving the critical parameters with suitable corrections for certain structural and mining conditions to obtain corrected PHSR(CPHSR).CPHSR was then applied for all the 34pot-holes studied and it was found that all the pot-holes fall under Class I and Class II category of risk representing a very high to high risk class.An effort was made for the estimation of pot-hole depth utilizing the developed CPHSR in both the development and depillaring cases.The developed approach was found to yield consistent results in pot-hole depth prediction.
