Using argon as the work gas, the effects and mechanisms of poly（tetrafluoroethylene） （PTFE） film surface modification were investigated in a low pressure plasma reactor. Results show that higher hydrophilicity wit...Using argon as the work gas, the effects and mechanisms of poly（tetrafluoroethylene） （PTFE） film surface modification were investigated in a low pressure plasma reactor. Results show that higher hydrophilicity with little degradation, in terms of the scanning electron microscopy （SEM）, was obtained after treatment, especially when the sample was placed in the post-discharge area. More polar functional groups and higher surface free energy, especially the polar component, formed on the PTFE surface were responsible for the modification. For the relatively high purity radicals and rare discharge particles in the post-discharge area, the etching was restrained and the introducing reactions were enhanced, and thus, a better modification occurred there.展开更多
Atmospheric pressure plasma jet shows great potential for polymer film processing. The electrode geometry is the key factor to determine discharge characteristics and film modification of jets. In this paper, we compa...Atmospheric pressure plasma jet shows great potential for polymer film processing. The electrode geometry is the key factor to determine discharge characteristics and film modification of jets. In this paper, we compared the discharge characteristics and the film modifications of atmospheric pressure plasma jets with needle-ring electrode(NRE) and doublering electrode(DRE). The results show that jet with NRE has stronger electric field intensity and higher discharge power,making it present more reactive oxygen particles and higher electron temperature, but its discharge stability is insufficient.In contrast, the jet with DRE has uniform electric field distribution of lower field intensity, which allows it to maintain stable discharge over a wide range of applied voltages. Besides, the modification results show that the treatment efficiency of PET film by NRE is higher than that by DRE. These results provide a suitable atmospheric pressure plasma jets device selection scheme for polymer film processing process.展开更多
In this paper,polyimide（PI）films are modified using an atmospheric pressure plasma generated by a dielectric barrier discharge（DBD）in argon.Surface performance of PI film and its dependence on exposure time from 0...In this paper,polyimide（PI）films are modified using an atmospheric pressure plasma generated by a dielectric barrier discharge（DBD）in argon.Surface performance of PI film and its dependence on exposure time from 0 s to 300 s are investigated by dynamic water contact angle（WCA）,field emission scanning electron microscopy（FESEM）,and Fourier transform infrared spectroscopy in attenuated total multiple reflection mode（FTIR-ATR）.The study demonstrates that dynamic WCA exhibits a minimum with 40 s plasma treatment,and evenly distributed nano-dots and shadow concaves appeared for 40 s and 12 s Ar plasma treatment individually.A short period of plasma modification can contribute to the scission of the imide ring and the introduction of C-O and C=O（-COOH）by detailed analysis of FTIR-ATR.展开更多
Three different low-temperature plasma-based methods were used to improve the surface hydrophilicity of polyethy- lene （PE） films, and all the modification processes were carried out by employing an atmospheric pres...Three different low-temperature plasma-based methods were used to improve the surface hydrophilicity of polyethy- lene （PE） films, and all the modification processes were carried out by employing an atmospheric pressure plasma jet （APPJ） system. （a） PE films were directly modified by APPJ using a gas mixture of He and 02. （b） Acrylic acid （AA） was introduced into the system and a polymer acrylic acid （PAA） coating was deposited onto the PE films. （c） AA was grafted onto the PE surface activated by plasma pre-treatment. It was found that the hydrophilicity of the PE films was significantly improved for all the three methods. However, the samples modified by Process （a） showed hydrophobicity recovery after a storage time of 20 days while no significant change was found in samples modified by Process （b） and Process （c）. The Fourier transform infrared spectroscopy （FTIR） results indicated that the most intensive C=O peak was detected on the PE surface modified by Process （c）. According to the X-ray photoelectron spectroscopy （XPS） analysis, the ratios of oxygen-containing polar groups for samples modified by Process （b） and Process （c） were higher than that modified by Process （a）.展开更多
To achieve an atmospheric pressure glow discharge（APGD）in air and modify the surface of polyester thread using plasma,the electric field distribution and discharge characteristics under different conditions were stu...To achieve an atmospheric pressure glow discharge（APGD）in air and modify the surface of polyester thread using plasma,the electric field distribution and discharge characteristics under different conditions were studied.We found that the region with a strong electric field,which was formed in a tiny gap between two electrodes constituting a line-line contact electrode structure,provided the initial electron for the entire discharge process.Thus,the discharge voltage was reduced.The dielectric barrier of the line-line contact electrodes can inhibit the generation of secondary electrons.Thus,the transient current pulse discharge was reduced significantly,and an APGD in air was achieved.We designed double layer line-line contact electrodes,which can generate the APGD on the surface of a material under treatment directly.A noticeable change in the surface morphology of polyester fiber was visualized with the aid of a scanning electron microscope（SEM）.Two electrode structures-the multi-row line-line and double-helix line-line contact electrodes-were designed.A large area of the APGD plasma with flat and curved surfaces can be formed in air using these contact electrodes.This can improve the efficiency of surface treatment and is significant for the application of the APGD plasma in industries.展开更多
为提高蛋清蛋白凝胶性,本研究以蛋清蛋白(Egg white protein,EWP)为研究对象,通过分析质构、持水率、分子作用力、傅里叶红外色谱、圆二色谱、粒径、电位、巯基含量、表面疏水力及扫描电镜的变化,探究超高压处理(Ultra-high pressure,U...为提高蛋清蛋白凝胶性,本研究以蛋清蛋白(Egg white protein,EWP)为研究对象,通过分析质构、持水率、分子作用力、傅里叶红外色谱、圆二色谱、粒径、电位、巯基含量、表面疏水力及扫描电镜的变化,探究超高压处理(Ultra-high pressure,UHP)、谷氨酰胺转胺酶处理(Transglutaminase,TG)及超高压协同TG酶处理(Ultra-high pressure synergistic Transglutaminase,UTG)的蛋清蛋白热诱导凝胶机理及结构的变化。结果表明:UHP-EWP、TG-EWP、UTG-EWP的硬度、弹性和持水性均有所提高,疏水相互作用力是维持凝胶的主要作用力;UHP-EWP、TG-EWP、UTG-EWP的α-螺旋含量均不同程度下降、β-折叠含量均上升;UHP-EWP的平均粒径值下降、电位绝对值下降,TG-EWP、UTG-EWP的变化与之相反;UHP-EWP、TG-EWP、UTG-EWP的游离巯基含量上升、总巯基含量下降、表面疏水性升高;凝胶结构更加致密光滑,平整度提高。本研究为蛋清蛋白热诱导凝胶改性提供了理论基础及研究思路。展开更多
基金supported by National Natural Science Foundation of China(No.21077084)the Foundational Research Fund of Xi'an Jiaotong University(No.08143023)
文摘Using argon as the work gas, the effects and mechanisms of poly（tetrafluoroethylene） （PTFE） film surface modification were investigated in a low pressure plasma reactor. Results show that higher hydrophilicity with little degradation, in terms of the scanning electron microscopy （SEM）, was obtained after treatment, especially when the sample was placed in the post-discharge area. More polar functional groups and higher surface free energy, especially the polar component, formed on the PTFE surface were responsible for the modification. For the relatively high purity radicals and rare discharge particles in the post-discharge area, the etching was restrained and the introducing reactions were enhanced, and thus, a better modification occurred there.
基金Project supported by the National Natural Science Foundation of China (Grant No. 11565003)the Jiangxi Province Academic Degree and Postgraduate Education and Teaching Reform Research Project (Grant No. JXYJG-2022-180)the Scientific Research Base Project of Gannan Normal University (Grant No. 22wdxt01)。
文摘Atmospheric pressure plasma jet shows great potential for polymer film processing. The electrode geometry is the key factor to determine discharge characteristics and film modification of jets. In this paper, we compared the discharge characteristics and the film modifications of atmospheric pressure plasma jets with needle-ring electrode(NRE) and doublering electrode(DRE). The results show that jet with NRE has stronger electric field intensity and higher discharge power,making it present more reactive oxygen particles and higher electron temperature, but its discharge stability is insufficient.In contrast, the jet with DRE has uniform electric field distribution of lower field intensity, which allows it to maintain stable discharge over a wide range of applied voltages. Besides, the modification results show that the treatment efficiency of PET film by NRE is higher than that by DRE. These results provide a suitable atmospheric pressure plasma jets device selection scheme for polymer film processing process.
文摘In this paper,polyimide（PI）films are modified using an atmospheric pressure plasma generated by a dielectric barrier discharge（DBD）in argon.Surface performance of PI film and its dependence on exposure time from 0 s to 300 s are investigated by dynamic water contact angle（WCA）,field emission scanning electron microscopy（FESEM）,and Fourier transform infrared spectroscopy in attenuated total multiple reflection mode（FTIR-ATR）.The study demonstrates that dynamic WCA exhibits a minimum with 40 s plasma treatment,and evenly distributed nano-dots and shadow concaves appeared for 40 s and 12 s Ar plasma treatment individually.A short period of plasma modification can contribute to the scission of the imide ring and the introduction of C-O and C=O（-COOH）by detailed analysis of FTIR-ATR.
基金Project supported by the National Natural Science Foundation of China(Grant No.11175157)the Zhejiang Provincial Key Innovation Team,China(Grant No.2012R10038)the 521 Talent Project of Zhejiang Sci-Tech University,China
文摘Three different low-temperature plasma-based methods were used to improve the surface hydrophilicity of polyethy- lene （PE） films, and all the modification processes were carried out by employing an atmospheric pressure plasma jet （APPJ） system. （a） PE films were directly modified by APPJ using a gas mixture of He and 02. （b） Acrylic acid （AA） was introduced into the system and a polymer acrylic acid （PAA） coating was deposited onto the PE films. （c） AA was grafted onto the PE surface activated by plasma pre-treatment. It was found that the hydrophilicity of the PE films was significantly improved for all the three methods. However, the samples modified by Process （a） showed hydrophobicity recovery after a storage time of 20 days while no significant change was found in samples modified by Process （b） and Process （c）. The Fourier transform infrared spectroscopy （FTIR） results indicated that the most intensive C=O peak was detected on the PE surface modified by Process （c）. According to the X-ray photoelectron spectroscopy （XPS） analysis, the ratios of oxygen-containing polar groups for samples modified by Process （b） and Process （c） were higher than that modified by Process （a）.
文摘To achieve an atmospheric pressure glow discharge（APGD）in air and modify the surface of polyester thread using plasma,the electric field distribution and discharge characteristics under different conditions were studied.We found that the region with a strong electric field,which was formed in a tiny gap between two electrodes constituting a line-line contact electrode structure,provided the initial electron for the entire discharge process.Thus,the discharge voltage was reduced.The dielectric barrier of the line-line contact electrodes can inhibit the generation of secondary electrons.Thus,the transient current pulse discharge was reduced significantly,and an APGD in air was achieved.We designed double layer line-line contact electrodes,which can generate the APGD on the surface of a material under treatment directly.A noticeable change in the surface morphology of polyester fiber was visualized with the aid of a scanning electron microscope（SEM）.Two electrode structures-the multi-row line-line and double-helix line-line contact electrodes-were designed.A large area of the APGD plasma with flat and curved surfaces can be formed in air using these contact electrodes.This can improve the efficiency of surface treatment and is significant for the application of the APGD plasma in industries.
