In existing studies, most slope stability analyses concentrate on conditions with constant temperature, assuming the slope is intact, and employ the Mohr-Coulomb (M-C) failure criterion for saturated soil to character...In existing studies, most slope stability analyses concentrate on conditions with constant temperature, assuming the slope is intact, and employ the Mohr-Coulomb (M-C) failure criterion for saturated soil to characterize the strength of the backfill. However, the actual working temperature of slopes varies, and natural phenomena such as rainfall and groundwater infiltration commonly result in unsaturated soil conditions, with cracks typically present in cohesive slopes. This study introduces a novel approach for assessing the stability of unsaturated soil stepped slopes under varying temperatures, incorporating the effects of open and vertical cracks. Utilizing the kinematic approach and gravity increase method, we developed a three-dimensional (3D) rotational wedge failure mechanism to simulate slope collapse, enhancing the traditional two-dimensional analyses. We integrated temperature-dependent functions and nonlinear shear strength equations to evaluate the impact of temperature on four typical unsaturated soil types. A particle swarm optimization algorithm was employed to calculate the safety factor, ensuring our method’s accuracy by comparing it with existing studies. The results indicate that considering 3D effects yields a higher safety factor, while cracks reduce slope stability. Each unsaturated soil exhibits a distinctive temperature response curve, highlighting the importance of understanding soil types in the design phase.展开更多
High-performance graphite materials have important roles in aerospace and nuclear reactor technologies because of their outstanding chemical stability and high-temperature performance.Their traditional production meth...High-performance graphite materials have important roles in aerospace and nuclear reactor technologies because of their outstanding chemical stability and high-temperature performance.Their traditional production method relies on repeated impregnation-carbonization and graphitization,and is plagued by lengthy preparation cycles and high energy consumption.Phase transition-assisted self-pressurized selfsintering technology can rapidly produce high-strength graphite materials,but the fracture strain of the graphite materials produced is poor.To solve this problem,this study used a two-step sintering method to uniformly introduce micro-nano pores into natural graphite-based bulk graphite,achieving improved fracture strain of the samples without reducing their density and mechanical properties.Using natural graphite powder,micron-diamond,and nano-diamond as raw materials,and by precisely controlling the staged pressure release process,the degree of diamond phase transition expansion was effectively regulated.The strain-to-failure of the graphite samples reached 1.2%,a 35%increase compared to samples produced by fullpressure sintering.Meanwhile,their flexural strength exceeded 110 MPa,and their density was over 1.9 g/cm^(3).The process therefore produced both a high strength and a high fracture strain.The interface evolution and toughening mechanism during the two-step sintering process were investigated.It is believed that the micro-nano pores formed have two roles:as stress concentrators they induce yielding by shear and as multi-crack propagation paths they significantly lengthen the crack propagation path.The two-step sintering phase transition strategy introduces pores and provides a new approach for increasing the fracture strain of brittle materials.展开更多
A two-step leaching method in combination of acid and ethylene diaminetetraacetic acid disodium （EDTA-Na2） was applied to extract metals such as Cd, Cu, Fe, Pb and Zn from a zinc smelting slag. The results show that...A two-step leaching method in combination of acid and ethylene diaminetetraacetic acid disodium （EDTA-Na2） was applied to extract metals such as Cd, Cu, Fe, Pb and Zn from a zinc smelting slag. The results show that the extraction rates of Cd, Cu, Fe and Zn in slag reach 88.3%, 54.1%, 69.6% and 54.7%, respectively, while the extraction rate of Pb is only 0.05% leached with 1.25 mol/L sulfuric acid under the conditions of the ratio of slag to liquid of 100 g/L, 65 ℃ and 120 r/min for 2 h. However, Pb extraction rate from 1.25 mol/L sulfuric acid leached residue reaches as high as 66.5% by using 0.1 mol/L EDTA-Na2 solution. The results indicate that two-step sequential extraction procedure combining 1.25 mol/L sulfuric acid and 0.1 mol/L EDTA-Na2 solution can extensively extract Cd, Cu, Fe, Pb and Zn from zinc smelting slag.展开更多
For input saturated Hammerstein systems, the two-step predictive control strategy is adopted. The first step calculates the desired intermediate variable applying unconstrained linear modal and predictive control. The...For input saturated Hammerstein systems, the two-step predictive control strategy is adopted. The first step calculates the desired intermediate variable applying unconstrained linear modal and predictive control. The second step obtains the real-time control action by solving algebraic equation and desaturation. The case of immeasurable state is considered where the observer gain matrix is solved by Sylvester equation. The sufficient closed-loop stability condition is given and the designing and tuning algorithm for the domain of attraction is proposed. The theoretical results are validated by an example.展开更多
A two-step information extraction method is presented to capture the specific index-related information more accurately.In the first step,the overall process variables are separated into two sets based on Pearson corr...A two-step information extraction method is presented to capture the specific index-related information more accurately.In the first step,the overall process variables are separated into two sets based on Pearson correlation coefficient.One is process variables strongly related to the specific index and the other is process variables weakly related to the specific index.Through performing principal component analysis(PCA)on the two sets,the directions of latent variables have changed.In other words,the correlation between latent variables in the set with strong correlation and the specific index may become weaker.Meanwhile,the correlation between latent variables in the set with weak correlation and the specific index may be enhanced.In the second step,the two sets are further divided into a subset strongly related to the specific index and a subset weakly related to the specific index from the perspective of latent variables using Pearson correlation coefficient,respectively.Two subsets strongly related to the specific index form a new subspace related to the specific index.Then,a hybrid monitoring strategy based on predicted specific index using partial least squares(PLS)and T2statistics-based method is proposed for specific index-related process monitoring using comprehensive information.Predicted specific index reflects real-time information for the specific index.T2statistics are used to monitor specific index-related information.Finally,the proposed method is applied to Tennessee Eastman(TE).The results indicate the effectiveness of the proposed method.展开更多
NASICON-type structured NaTi2(PO4)3 has been regarded as a promising anode material for non-aqueous and aqueous Na-ion batteries,whereas its sodium storage performance was greatly restricted by its inherent inferior e...NASICON-type structured NaTi2(PO4)3 has been regarded as a promising anode material for non-aqueous and aqueous Na-ion batteries,whereas its sodium storage performance was greatly restricted by its inherent inferior electronic conductivity.In the present work,a two-step carbon modification method using prefabricated carbon spheres as support and phenolic resin as carbon source was proposed to prepare advanced NaTi2(PO4)3/C.The as-prepared composite with carbon spheres displayed a much higher reversible capacity(126.7 mA?h/g vs 106.7 mA?h/g at 0.5C)than the control sample without carbon spheres.Superior rate capability with discharge capacities of 115.1,95.5,80.8 mAh/g at 1C,10C,20C,respectively and long-term cycling stability with capacity retention of 92.4%after 1000 cycles at 5C were also observed.Owing to the designing of two-step carbon modification,although the as-prepared sample shows much smaller surface area,it possesses much better conductive network and more uniform particle distribution,resulting in higher electronic conductivity and faster ionic conductivity,thereby superior sodium storage ability at high rate.展开更多
In this paper, a new numerical scheme of Total Variation Diminishing (TVD) MacCormack type for MagnetoHydroDynamic (MHD) equations is proposed by taking into account of the characteristics such as convergence, stabili...In this paper, a new numerical scheme of Total Variation Diminishing (TVD) MacCormack type for MagnetoHydroDynamic (MHD) equations is proposed by taking into account of the characteristics such as convergence, stability, resolution. This new scheme is established by solving the MHD equations with a TVD modified MacCormack scheme for the purpose of developing a scheme of quick convergence as well as of TVD property. To show the validation, simplicity and practicability of the scheme for modelling MHD problems, a self-similar Cauchy problem with the discontinuous initial data consisting of constant states, and the collision of two fast MHD shocks, and two-dimensional Orszag and Tang's MHD vortex problem are discussed with the numerical results conforming to the existing results obtained by the Roe type TVD, the high-order Godunov scheme,and Weighted Essentially Non-Oscillatory (WENO) scheme. The numerical tests show that this two-step TVD MacCormack numerical scheme for MHD system is of robust operation in the presence of very strong waves, thin shock fronts, thin contact and slip surface discontinuities.展开更多
Anodic aluminium oxide(AAO)porous films with an interpore distance of several hundred nanometers are of great interest due to their unique interaction with visible and near-infrared light,and high thermal stability up...Anodic aluminium oxide(AAO)porous films with an interpore distance of several hundred nanometers are of great interest due to their unique interaction with visible and near-infrared light,and high thermal stability up to 1500°C.These porous films are prepared by aluminium anodizing at high voltages in weak acids,leading to a slow kinetics of initial stages of porous structure formation.Here,we propose an approach to accelerate AAO formation in electrolytes based on weak acids such as phosphoric acid.Aluminium foils,pre-patterned using first anodizing under different conditions and subsequent selective dissolution of a sacrificial AAO layer,were utilized as substrates.The morphology of the aluminium surface,including surface roughness and height of pyramidal spikes,plays a crucial role in the pore nucleation and rearrangement process during the second anodizing.In particular,by first anodizing in strong acid electrolytes at low voltages(such as 0.3 mol·L^(-1)sulfuric acid at 25 V),it is possible to double the rate of pore nucleation and subsequent reach of the steady-state regime during second anodizing in phosphoric acid.As a result,about 2 hours can be saved during the two-step anodizing process in phosphoric acid if a strong acid electrolyte is used for the first anodizing to pre-pattern aluminium surface.展开更多
基金Project(51378510) supported by the National Natural Science Foundation of China。
文摘In existing studies, most slope stability analyses concentrate on conditions with constant temperature, assuming the slope is intact, and employ the Mohr-Coulomb (M-C) failure criterion for saturated soil to characterize the strength of the backfill. However, the actual working temperature of slopes varies, and natural phenomena such as rainfall and groundwater infiltration commonly result in unsaturated soil conditions, with cracks typically present in cohesive slopes. This study introduces a novel approach for assessing the stability of unsaturated soil stepped slopes under varying temperatures, incorporating the effects of open and vertical cracks. Utilizing the kinematic approach and gravity increase method, we developed a three-dimensional (3D) rotational wedge failure mechanism to simulate slope collapse, enhancing the traditional two-dimensional analyses. We integrated temperature-dependent functions and nonlinear shear strength equations to evaluate the impact of temperature on four typical unsaturated soil types. A particle swarm optimization algorithm was employed to calculate the safety factor, ensuring our method’s accuracy by comparing it with existing studies. The results indicate that considering 3D effects yields a higher safety factor, while cracks reduce slope stability. Each unsaturated soil exhibits a distinctive temperature response curve, highlighting the importance of understanding soil types in the design phase.
基金Natural Science Foundation of Shanghai(24ZR1400800)he Natural Science Foundation of China(U23A20685,52073058,91963204)+1 种基金the National Key R&D Program of China(2021YFB3701400)Shanghai Sailing Program(23YF1400200)。
文摘High-performance graphite materials have important roles in aerospace and nuclear reactor technologies because of their outstanding chemical stability and high-temperature performance.Their traditional production method relies on repeated impregnation-carbonization and graphitization,and is plagued by lengthy preparation cycles and high energy consumption.Phase transition-assisted self-pressurized selfsintering technology can rapidly produce high-strength graphite materials,but the fracture strain of the graphite materials produced is poor.To solve this problem,this study used a two-step sintering method to uniformly introduce micro-nano pores into natural graphite-based bulk graphite,achieving improved fracture strain of the samples without reducing their density and mechanical properties.Using natural graphite powder,micron-diamond,and nano-diamond as raw materials,and by precisely controlling the staged pressure release process,the degree of diamond phase transition expansion was effectively regulated.The strain-to-failure of the graphite samples reached 1.2%,a 35%increase compared to samples produced by fullpressure sintering.Meanwhile,their flexural strength exceeded 110 MPa,and their density was over 1.9 g/cm^(3).The process therefore produced both a high strength and a high fracture strain.The interface evolution and toughening mechanism during the two-step sintering process were investigated.It is believed that the micro-nano pores formed have two roles:as stress concentrators they induce yielding by shear and as multi-crack propagation paths they significantly lengthen the crack propagation path.The two-step sintering phase transition strategy introduces pores and provides a new approach for increasing the fracture strain of brittle materials.
基金Project(2011SK3262) supported by Science and Technology Program of Hunan Province,China
文摘A two-step leaching method in combination of acid and ethylene diaminetetraacetic acid disodium （EDTA-Na2） was applied to extract metals such as Cd, Cu, Fe, Pb and Zn from a zinc smelting slag. The results show that the extraction rates of Cd, Cu, Fe and Zn in slag reach 88.3%, 54.1%, 69.6% and 54.7%, respectively, while the extraction rate of Pb is only 0.05% leached with 1.25 mol/L sulfuric acid under the conditions of the ratio of slag to liquid of 100 g/L, 65 ℃ and 120 r/min for 2 h. However, Pb extraction rate from 1.25 mol/L sulfuric acid leached residue reaches as high as 66.5% by using 0.1 mol/L EDTA-Na2 solution. The results indicate that two-step sequential extraction procedure combining 1.25 mol/L sulfuric acid and 0.1 mol/L EDTA-Na2 solution can extensively extract Cd, Cu, Fe, Pb and Zn from zinc smelting slag.
文摘For input saturated Hammerstein systems, the two-step predictive control strategy is adopted. The first step calculates the desired intermediate variable applying unconstrained linear modal and predictive control. The second step obtains the real-time control action by solving algebraic equation and desaturation. The case of immeasurable state is considered where the observer gain matrix is solved by Sylvester equation. The sufficient closed-loop stability condition is given and the designing and tuning algorithm for the domain of attraction is proposed. The theoretical results are validated by an example.
基金Projects(61374140,61673173)supported by the National Natural Science Foundation of ChinaProjects(222201717006,222201714031)supported by the Fundamental Research Funds for the Central Universities,China
文摘A two-step information extraction method is presented to capture the specific index-related information more accurately.In the first step,the overall process variables are separated into two sets based on Pearson correlation coefficient.One is process variables strongly related to the specific index and the other is process variables weakly related to the specific index.Through performing principal component analysis(PCA)on the two sets,the directions of latent variables have changed.In other words,the correlation between latent variables in the set with strong correlation and the specific index may become weaker.Meanwhile,the correlation between latent variables in the set with weak correlation and the specific index may be enhanced.In the second step,the two sets are further divided into a subset strongly related to the specific index and a subset weakly related to the specific index from the perspective of latent variables using Pearson correlation coefficient,respectively.Two subsets strongly related to the specific index form a new subspace related to the specific index.Then,a hybrid monitoring strategy based on predicted specific index using partial least squares(PLS)and T2statistics-based method is proposed for specific index-related process monitoring using comprehensive information.Predicted specific index reflects real-time information for the specific index.T2statistics are used to monitor specific index-related information.Finally,the proposed method is applied to Tennessee Eastman(TE).The results indicate the effectiveness of the proposed method.
基金Projects(21671200,21571189)supported by the National Natural Science Foundation of ChinaProjects(2016TP1007,2017TP1001)supported by the Hunan Provincial Science and Technology Plan Project of China+1 种基金Project(2017CL17)supported by the Opening Project of Material Corrosion and Protection Key Laboratory of Sichuan Province,ChinaProject(2016CXS009)supported by Innovation-Driven Project of Central South University,China
文摘NASICON-type structured NaTi2(PO4)3 has been regarded as a promising anode material for non-aqueous and aqueous Na-ion batteries,whereas its sodium storage performance was greatly restricted by its inherent inferior electronic conductivity.In the present work,a two-step carbon modification method using prefabricated carbon spheres as support and phenolic resin as carbon source was proposed to prepare advanced NaTi2(PO4)3/C.The as-prepared composite with carbon spheres displayed a much higher reversible capacity(126.7 mA?h/g vs 106.7 mA?h/g at 0.5C)than the control sample without carbon spheres.Superior rate capability with discharge capacities of 115.1,95.5,80.8 mAh/g at 1C,10C,20C,respectively and long-term cycling stability with capacity retention of 92.4%after 1000 cycles at 5C were also observed.Owing to the designing of two-step carbon modification,although the as-prepared sample shows much smaller surface area,it possesses much better conductive network and more uniform particle distribution,resulting in higher electronic conductivity and faster ionic conductivity,thereby superior sodium storage ability at high rate.
基金the National Natural Science Foundation of China(No.49925412,49990450),the National Basic Research Science Foundation(No.G2000078405)
文摘In this paper, a new numerical scheme of Total Variation Diminishing (TVD) MacCormack type for MagnetoHydroDynamic (MHD) equations is proposed by taking into account of the characteristics such as convergence, stability, resolution. This new scheme is established by solving the MHD equations with a TVD modified MacCormack scheme for the purpose of developing a scheme of quick convergence as well as of TVD property. To show the validation, simplicity and practicability of the scheme for modelling MHD problems, a self-similar Cauchy problem with the discontinuous initial data consisting of constant states, and the collision of two fast MHD shocks, and two-dimensional Orszag and Tang's MHD vortex problem are discussed with the numerical results conforming to the existing results obtained by the Roe type TVD, the high-order Godunov scheme,and Weighted Essentially Non-Oscillatory (WENO) scheme. The numerical tests show that this two-step TVD MacCormack numerical scheme for MHD system is of robust operation in the presence of very strong waves, thin shock fronts, thin contact and slip surface discontinuities.
基金Russian Science Foundation(Grant Number 25-29-00323)。
文摘Anodic aluminium oxide(AAO)porous films with an interpore distance of several hundred nanometers are of great interest due to their unique interaction with visible and near-infrared light,and high thermal stability up to 1500°C.These porous films are prepared by aluminium anodizing at high voltages in weak acids,leading to a slow kinetics of initial stages of porous structure formation.Here,we propose an approach to accelerate AAO formation in electrolytes based on weak acids such as phosphoric acid.Aluminium foils,pre-patterned using first anodizing under different conditions and subsequent selective dissolution of a sacrificial AAO layer,were utilized as substrates.The morphology of the aluminium surface,including surface roughness and height of pyramidal spikes,plays a crucial role in the pore nucleation and rearrangement process during the second anodizing.In particular,by first anodizing in strong acid electrolytes at low voltages(such as 0.3 mol·L^(-1)sulfuric acid at 25 V),it is possible to double the rate of pore nucleation and subsequent reach of the steady-state regime during second anodizing in phosphoric acid.As a result,about 2 hours can be saved during the two-step anodizing process in phosphoric acid if a strong acid electrolyte is used for the first anodizing to pre-pattern aluminium surface.
