The technology for green and macro-conversion of solid waste biomass to prepare high-quality activated carbon demands urgent development.This study proposes a technique for synthesizing carbon adsorbents using trace K...The technology for green and macro-conversion of solid waste biomass to prepare high-quality activated carbon demands urgent development.This study proposes a technique for synthesizing carbon adsorbents using trace KOH-catalyzed CO_(2) activation.Comprehensive investigations were conducted on three aspects:physicochemical structure evolution of biochar,mechanistic understanding of trace KOH-facilitated CO_(2) activation processes,and application characteristics for CO_(2) adsorption.Results demonstrate that biochar activated by trace KOH(<10%)and CO_(2) achieves comparable specific surface area(1244.09 m^(2)/g)to that obtained with 100%KOH activation(1425.10 m^(2)/g).The pore structure characteristics(specific surface area and pore volume)are governed by CO and CH4 generated through K-salt catalyzed reactions between CO_(2) and biochar.The optimal CO_(2) adsorption capacities of KBC adsorbent reached 4.70 mmol/g(0℃)and 7.25 mmol/g(25℃),representing the maximum values among comparable carbon adsorbents.The 5%KBC-CO_(2) sample exhibited CO_(2) adsorption capacities of 3.19 and 5.01 mmol/g under respective conditions,attaining current average performance levels.Notably,CO_(2)/N_(2) selectivity(85∶15,volume ratio)reached 64.71 at 0.02 bar with robust cycling stability.Molecular dynamics simulations revealed that oxygen-containing functional groups accelerate CO_(2) adsorption kinetics and enhance micropore storage capacity.This technical route offers simplicity,environmental compatibility,and scalability,providing critical references for large-scale preparation of high-quality carbon materials.展开更多
Identifying potential hazards is crucial for maintaining the structural stability of opencast mining area.To address the limitations of irregular structure and sparse microseismic events in opencast mining monitoring,...Identifying potential hazards is crucial for maintaining the structural stability of opencast mining area.To address the limitations of irregular structure and sparse microseismic events in opencast mining monitoring,this paper proposes an active-source imaging method for identifying potential hazards precisely based on velocity structure.This method innovatively divides the irregular structure into unstructured grids and introduces a damping and smoothing regularization operator into the inversion process,mitigating the ill-posedness caused by the sparse distribution of events and rays.Numerical and laboratory experiments were conducted to verify the reliability and effectiveness of the proposed method.The results demonstrate the competitive performance of the method in identifying hazard areas of varying sizes and numbers.The proposed method shows potential for meeting hazard identification requirements in the complex opencast mining structure.Furthermore,field experiments were conducted on an rare earth mine slope.It confirms that the proposed method provides a more concrete and intuitive scheme for stability monitoring for the microseismic monitoring system.This paper not only demonstrates the application of acoustic structure velocity imaging technology in detecting unstructured potential hazard regions but also provides valuable insights into the construction and maintenance of stable opencast mining area.展开更多
Linear minimum mean square error(MMSE)detection has been shown to achieve near-optimal performance for massive multiple-input multiple-output(MIMO)systems but inevitably involves complicated matrix inversion,which ent...Linear minimum mean square error(MMSE)detection has been shown to achieve near-optimal performance for massive multiple-input multiple-output(MIMO)systems but inevitably involves complicated matrix inversion,which entails high complexity.To avoid the exact matrix inversion,a considerable number of implicit and explicit approximate matrix inversion based detection methods is proposed.By combining the advantages of both the explicit and the implicit matrix inversion,this paper introduces a new low-complexity signal detection algorithm.Firstly,the relationship between implicit and explicit techniques is analyzed.Then,an enhanced Newton iteration method is introduced to realize an approximate MMSE detection for massive MIMO uplink systems.The proposed improved Newton iteration significantly reduces the complexity of conventional Newton iteration.However,its complexity is still high for higher iterations.Thus,it is applied only for first two iterations.For subsequent iterations,we propose a novel trace iterative method(TIM)based low-complexity algorithm,which has significantly lower complexity than higher Newton iterations.Convergence guarantees of the proposed detector are also provided.Numerical simulations verify that the proposed detector exhibits significant performance enhancement over recently reported iterative detectors and achieves close-to-MMSE performance while retaining the low-complexity advantage for systems with hundreds of antennas.展开更多
Various trace elements, especially potential toxic trace elements such as As, Cd, Cr, Cu, Hg, Pb, Ni, Se, Tl, Zn, would be concentrated in processing of coal. Determination of these elements in coal is very important ...Various trace elements, especially potential toxic trace elements such as As, Cd, Cr, Cu, Hg, Pb, Ni, Se, Tl, Zn, would be concentrated in processing of coal. Determination of these elements in coal is very important for identification of coal quality. A method is developed for determination of 49 trace elements in coal by high resolution inductively coupled plasma mass spectrometry (HR-ICPMS). Microwave acid digestion and low-temperature airproof acid digestion for sample preparation were investigated. It is shown that the low-temperature airproof acid digestion method is of lower blank, and more suitalbe for the coal sample preparation. The on-line internal standard (Rh) sample introduction is applied to compensate matrix effects in measurement by ICPMS. The method gives low detection limits (0.002-1.60 μg/g) and better relative standard deviations (0.60%-4.78%) for the determined 49 elements in coal.展开更多
Determination of thirty four trace metal elements in electronic high purity hydrochloric acid by ICP-MS (Standard Condition, Plasma Screen Condition) with membrane desolvation was described. Matrix effects were compen...Determination of thirty four trace metal elements in electronic high purity hydrochloric acid by ICP-MS (Standard Condition, Plasma Screen Condition) with membrane desolvation was described. Matrix effects were compensated by adding rhodium as the internal standard. Detection limits is 0.1 to 100 ng/L; the recovery of the method is 90%-110%. Long term RSD was less than 5%. The results from ICP and ICP-MS are correspondent. ICP-MS improves the accuracy and efficiency of analyses.展开更多
zack et al.(2004a)、Watson et al.(2006)以及Tomkins et al.(2007)(在2GPa条件下)的金红石中锆含量温度计计算结果显示,徐淮地区中生代侵入杂岩所含榴辉岩类包体所经历的榴辉岩相变质的温度范围分别为776～1099℃(平均898℃)、663～92...zack et al.(2004a)、Watson et al.(2006)以及Tomkins et al.(2007)(在2GPa条件下)的金红石中锆含量温度计计算结果显示,徐淮地区中生代侵入杂岩所含榴辉岩类包体所经历的榴辉岩相变质的温度范围分别为776～1099℃(平均898℃)、663～923℃(平均750℃)和714～981℃(平均804℃),这些温度结果可能并非榴辉岩相峰期变质温度;其角闪岩相退变质作用过程中保存的温度范围分别为555～777℃(平均697℃)、541～663℃(平均617℃)和588～714℃(平均667℃),这些结果不能代表角闪岩相退变质再平衡后的温度,而只能代表角闪岩相退变质作用过程中某一阶段的温度。微量元素地球化学特征研究表明,榴辉岩类包体所含金红石中的某些微量元素(如Nb、Ta、Cr、Fe、V等)含量与其原岩有继承和对应关系,其原岩主要为镁铁质岩石;榴辉岩类包体与其寄主岩石中部分高价态/高场强元素(HFSE)呈相互消长的关系。榴辉岩的形成与扬子地块和华北地块之间的俯冲-碰撞作用有关。展开更多
基金supported by the National Natural Science Foundation of China(52376103,542B2081).
文摘The technology for green and macro-conversion of solid waste biomass to prepare high-quality activated carbon demands urgent development.This study proposes a technique for synthesizing carbon adsorbents using trace KOH-catalyzed CO_(2) activation.Comprehensive investigations were conducted on three aspects:physicochemical structure evolution of biochar,mechanistic understanding of trace KOH-facilitated CO_(2) activation processes,and application characteristics for CO_(2) adsorption.Results demonstrate that biochar activated by trace KOH(<10%)and CO_(2) achieves comparable specific surface area(1244.09 m^(2)/g)to that obtained with 100%KOH activation(1425.10 m^(2)/g).The pore structure characteristics(specific surface area and pore volume)are governed by CO and CH4 generated through K-salt catalyzed reactions between CO_(2) and biochar.The optimal CO_(2) adsorption capacities of KBC adsorbent reached 4.70 mmol/g(0℃)and 7.25 mmol/g(25℃),representing the maximum values among comparable carbon adsorbents.The 5%KBC-CO_(2) sample exhibited CO_(2) adsorption capacities of 3.19 and 5.01 mmol/g under respective conditions,attaining current average performance levels.Notably,CO_(2)/N_(2) selectivity(85∶15,volume ratio)reached 64.71 at 0.02 bar with robust cycling stability.Molecular dynamics simulations revealed that oxygen-containing functional groups accelerate CO_(2) adsorption kinetics and enhance micropore storage capacity.This technical route offers simplicity,environmental compatibility,and scalability,providing critical references for large-scale preparation of high-quality carbon materials.
基金Project(2021YFC2900500)supported by the National Key Research and Development Program of China。
文摘Identifying potential hazards is crucial for maintaining the structural stability of opencast mining area.To address the limitations of irregular structure and sparse microseismic events in opencast mining monitoring,this paper proposes an active-source imaging method for identifying potential hazards precisely based on velocity structure.This method innovatively divides the irregular structure into unstructured grids and introduces a damping and smoothing regularization operator into the inversion process,mitigating the ill-posedness caused by the sparse distribution of events and rays.Numerical and laboratory experiments were conducted to verify the reliability and effectiveness of the proposed method.The results demonstrate the competitive performance of the method in identifying hazard areas of varying sizes and numbers.The proposed method shows potential for meeting hazard identification requirements in the complex opencast mining structure.Furthermore,field experiments were conducted on an rare earth mine slope.It confirms that the proposed method provides a more concrete and intuitive scheme for stability monitoring for the microseismic monitoring system.This paper not only demonstrates the application of acoustic structure velocity imaging technology in detecting unstructured potential hazard regions but also provides valuable insights into the construction and maintenance of stable opencast mining area.
基金supported by National Natural Science Foundation of China(62371225,62371227)。
文摘Linear minimum mean square error(MMSE)detection has been shown to achieve near-optimal performance for massive multiple-input multiple-output(MIMO)systems but inevitably involves complicated matrix inversion,which entails high complexity.To avoid the exact matrix inversion,a considerable number of implicit and explicit approximate matrix inversion based detection methods is proposed.By combining the advantages of both the explicit and the implicit matrix inversion,this paper introduces a new low-complexity signal detection algorithm.Firstly,the relationship between implicit and explicit techniques is analyzed.Then,an enhanced Newton iteration method is introduced to realize an approximate MMSE detection for massive MIMO uplink systems.The proposed improved Newton iteration significantly reduces the complexity of conventional Newton iteration.However,its complexity is still high for higher iterations.Thus,it is applied only for first two iterations.For subsequent iterations,we propose a novel trace iterative method(TIM)based low-complexity algorithm,which has significantly lower complexity than higher Newton iterations.Convergence guarantees of the proposed detector are also provided.Numerical simulations verify that the proposed detector exhibits significant performance enhancement over recently reported iterative detectors and achieves close-to-MMSE performance while retaining the low-complexity advantage for systems with hundreds of antennas.
文摘Various trace elements, especially potential toxic trace elements such as As, Cd, Cr, Cu, Hg, Pb, Ni, Se, Tl, Zn, would be concentrated in processing of coal. Determination of these elements in coal is very important for identification of coal quality. A method is developed for determination of 49 trace elements in coal by high resolution inductively coupled plasma mass spectrometry (HR-ICPMS). Microwave acid digestion and low-temperature airproof acid digestion for sample preparation were investigated. It is shown that the low-temperature airproof acid digestion method is of lower blank, and more suitalbe for the coal sample preparation. The on-line internal standard (Rh) sample introduction is applied to compensate matrix effects in measurement by ICPMS. The method gives low detection limits (0.002-1.60 μg/g) and better relative standard deviations (0.60%-4.78%) for the determined 49 elements in coal.
文摘Determination of thirty four trace metal elements in electronic high purity hydrochloric acid by ICP-MS (Standard Condition, Plasma Screen Condition) with membrane desolvation was described. Matrix effects were compensated by adding rhodium as the internal standard. Detection limits is 0.1 to 100 ng/L; the recovery of the method is 90%-110%. Long term RSD was less than 5%. The results from ICP and ICP-MS are correspondent. ICP-MS improves the accuracy and efficiency of analyses.
文摘zack et al.(2004a)、Watson et al.(2006)以及Tomkins et al.(2007)(在2GPa条件下)的金红石中锆含量温度计计算结果显示,徐淮地区中生代侵入杂岩所含榴辉岩类包体所经历的榴辉岩相变质的温度范围分别为776～1099℃(平均898℃)、663～923℃(平均750℃)和714～981℃(平均804℃),这些温度结果可能并非榴辉岩相峰期变质温度;其角闪岩相退变质作用过程中保存的温度范围分别为555～777℃(平均697℃)、541～663℃(平均617℃)和588～714℃(平均667℃),这些结果不能代表角闪岩相退变质再平衡后的温度,而只能代表角闪岩相退变质作用过程中某一阶段的温度。微量元素地球化学特征研究表明,榴辉岩类包体所含金红石中的某些微量元素(如Nb、Ta、Cr、Fe、V等)含量与其原岩有继承和对应关系,其原岩主要为镁铁质岩石;榴辉岩类包体与其寄主岩石中部分高价态/高场强元素(HFSE)呈相互消长的关系。榴辉岩的形成与扬子地块和华北地块之间的俯冲-碰撞作用有关。
