Roof pre-splitting is an effective method to control the roof with potential rock burst risk.In this study,three-point bending tests were carried out by using fine sandstone specimens with different pre-cracked length...Roof pre-splitting is an effective method to control the roof with potential rock burst risk.In this study,three-point bending tests were carried out by using fine sandstone specimens with different pre-cracked lengths as test objects,and digital speckle correlation method(DSCM)and acoustic emission(AE)technology were used to track the entire process of crack propagation.The effect of pre-cracks on the fracture of rock beams was evaluated,and the mechanical mechanism of the rock beam fracture process was analyzed.The rock beam pre-splitting design method was developed,and the application effect of the method was proved by the microseismic monitoring data obtained from the 10303 working face of Jining No.2 coal mine in China.The results show that the loading time history curve of pre-cracked beams exhibits obvious residual characteristics.Compared with the intact rock beam,the tensile strength,and maximum tensile strain of 35 mm pre-cracked rock beam are decreased by 32.4% and 33.1%,respectively and the acoustic emission b value is increased by 30.2%.According to the pre-splitting design method of rock beam,the maximum and average microseismic energy of the 10303 working face after pre-splitting construction are reduced by 25.6% and 6.4%,respectively,with excellent prevention and control effect of thick roof.展开更多
The three-point bending experiments were applied to investigating effects of loading rates on fracture toughness of Huanglong limestone. The fracture toughness of Huanglong limestone was measured over a wide range of ...The three-point bending experiments were applied to investigating effects of loading rates on fracture toughness of Huanglong limestone. The fracture toughness of Huanglong limestone was measured over a wide range of loading rates from 9 × 10-4 to 1.537 MPa.m1/2/s. According to the approximate relationship between static and dynamic fracture toughness of Huanglong limestone, relationship between the growth velocity of crack and dynamic fracture toughness was obtained. The main conclusions are summarized as follows. （1） When the loading rate is higher than 0.027 MPa-ml/2/s, the fracture toughness of Huanglong limestone increases markedly with increasing loading rate. However, when loading rate is lower than 0.027 MPa-ml/2/s, fracture toughness slightly increases with an increase in loading rate. （2） It is found from experimental results that fracture toughness is linearly proportional to the logarithmic expression of loading rate. （3） For Huanglong limestone, when the growth velocity of crack is lower than 100 m/s, the energy release rate slightly decreases with increasing the growth velocity of crack. However, when the growth velocity of crack is higher than 1 000 m/s, the energy release rate dramatically decreases with an increase in the crack growth velocity.展开更多
Critical crack tip opening displacement (CTODc) of concrete using experimental and analytical evaluation with seven different compressive strengths ranging from 30 up to 150 MPa was studied based on two types of fract...Critical crack tip opening displacement (CTODc) of concrete using experimental and analytical evaluation with seven different compressive strengths ranging from 30 up to 150 MPa was studied based on two types of fracture tests:three-point bending (TPB) and wedge splitting (WS).In the tests,the values of CTODc were experimentally recorded using a novel technique,in which fiber Bragg grating (FBG) sensors were used,and two traditional techniques,in which strain gauges and clip gauges were deployed.The values of CTODc of tested concrete were also predicted using two existing analytical formulae proposed by JENQ & SHAH and XU,respectively.It is found that the values of CTODc obtained by both experimental measurements and analytical formulae exhibit a negligible variation as the compressive strength of concrete increases,and the test geometry adopted has little impact on the value of CTODc.Regarding the experimental measurement of CTODc,the clip gauge method generally leads to a larger value of CTODc and shows a more significant scatter as compared with the other two methods,while the strain gauge method leads to a slightly lower CTODc as compared with the FBG sensor method.The analytical formula proposed by JENQ and SHAH is found to generally lead to an overestimation,while the analytical formula proposed by XU shows a good accuracy.展开更多
基金Project(2019SDZY02)supported by Major Scientific and Technological Innovation Project of Shandong Provincial Key Research Development Program,ChinaProject(ZR2019ZD13)supported by Major Program of Shandong Provincial Natural Science Foundation,ChinaProject(52274086)supported by the National Natural Science Foundation of China。
文摘Roof pre-splitting is an effective method to control the roof with potential rock burst risk.In this study,three-point bending tests were carried out by using fine sandstone specimens with different pre-cracked lengths as test objects,and digital speckle correlation method(DSCM)and acoustic emission(AE)technology were used to track the entire process of crack propagation.The effect of pre-cracks on the fracture of rock beams was evaluated,and the mechanical mechanism of the rock beam fracture process was analyzed.The rock beam pre-splitting design method was developed,and the application effect of the method was proved by the microseismic monitoring data obtained from the 10303 working face of Jining No.2 coal mine in China.The results show that the loading time history curve of pre-cracked beams exhibits obvious residual characteristics.Compared with the intact rock beam,the tensile strength,and maximum tensile strain of 35 mm pre-cracked rock beam are decreased by 32.4% and 33.1%,respectively and the acoustic emission b value is increased by 30.2%.According to the pre-splitting design method of rock beam,the maximum and average microseismic energy of the 10303 working face after pre-splitting construction are reduced by 25.6% and 6.4%,respectively,with excellent prevention and control effect of thick roof.
基金Projects(50490275, 50621403, 50778184) supported by the National Natural Science Foundation of ChinaProject(NCET-07-0911) supported by Program of New Century Talents of Ministry of EducationProject(CSTC, 2009BA4046) supported by the Natural Science Foundation of CQ CSTC
文摘The three-point bending experiments were applied to investigating effects of loading rates on fracture toughness of Huanglong limestone. The fracture toughness of Huanglong limestone was measured over a wide range of loading rates from 9 × 10-4 to 1.537 MPa.m1/2/s. According to the approximate relationship between static and dynamic fracture toughness of Huanglong limestone, relationship between the growth velocity of crack and dynamic fracture toughness was obtained. The main conclusions are summarized as follows. （1） When the loading rate is higher than 0.027 MPa-ml/2/s, the fracture toughness of Huanglong limestone increases markedly with increasing loading rate. However, when loading rate is lower than 0.027 MPa-ml/2/s, fracture toughness slightly increases with an increase in loading rate. （2） It is found from experimental results that fracture toughness is linearly proportional to the logarithmic expression of loading rate. （3） For Huanglong limestone, when the growth velocity of crack is lower than 100 m/s, the energy release rate slightly decreases with increasing the growth velocity of crack. However, when the growth velocity of crack is higher than 1 000 m/s, the energy release rate dramatically decreases with an increase in the crack growth velocity.
基金Project(50438010) supported by the Key Program of the National Natural Science Foundation of ChinaProject(JGZXJJ2006-13) supported by the Research and Application Programs of Key Technologies for Major Constructions in the South-North Water Transfer Project Construction in China
文摘Critical crack tip opening displacement (CTODc) of concrete using experimental and analytical evaluation with seven different compressive strengths ranging from 30 up to 150 MPa was studied based on two types of fracture tests:three-point bending (TPB) and wedge splitting (WS).In the tests,the values of CTODc were experimentally recorded using a novel technique,in which fiber Bragg grating (FBG) sensors were used,and two traditional techniques,in which strain gauges and clip gauges were deployed.The values of CTODc of tested concrete were also predicted using two existing analytical formulae proposed by JENQ & SHAH and XU,respectively.It is found that the values of CTODc obtained by both experimental measurements and analytical formulae exhibit a negligible variation as the compressive strength of concrete increases,and the test geometry adopted has little impact on the value of CTODc.Regarding the experimental measurement of CTODc,the clip gauge method generally leads to a larger value of CTODc and shows a more significant scatter as compared with the other two methods,while the strain gauge method leads to a slightly lower CTODc as compared with the FBG sensor method.The analytical formula proposed by JENQ and SHAH is found to generally lead to an overestimation,while the analytical formula proposed by XU shows a good accuracy.
