期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
A novel adsorbent of three-dimensional ordered macro/mesoporous carbon for removal of malachite green dye 被引量:5
1
作者 WAGN Jie HOU Guang-ya +3 位作者 WU Lian-kui CAO Hua-zhen ZHENG Guo-qu TANG Yi-ping 《Journal of Central South University》 SCIE EI CAS CSCD 2020年第2期388-402,共15页
Three-dimensional ordered macro/mesoporous carbon(3DOM/m-C)with high specific surface area was synthesized by colloid crystal template method with chemical activation by KOH and used as the adsorbent for removing mala... Three-dimensional ordered macro/mesoporous carbon(3DOM/m-C)with high specific surface area was synthesized by colloid crystal template method with chemical activation by KOH and used as the adsorbent for removing malachite green(MG)in aqueous solution.The microstructures of the adsorbents were characterized by FESEM,TEM and BET,and the effects of initial dye concentration,contact time,solution pH,and temperature on adsorption performance were investigated.The results show that the 3DOM/m-C exhibits extremely high adsorption capacity of 3541.1 mg/g within 2 h,which could be attributed to the novel ordered hierarchical structure with mesopores on three-dimensional ordered macroporous carbon walls.And the adsorption behavior conforms to the pseudo-second-order kinetic and Langmuir adsorption isotherm.3DOM/m-C can be recycled after being desorbed by absolute ethanol,and still maintains a high capacity of 2762.06 mg/g after 5 cycles. 展开更多
关键词 malachite green adsorption three-dimensional ordered macroporous MESOPOROUS thermodynamics kinetics DESORPTION
在线阅读 下载PDF
三维有序大孔间规聚苯乙烯的制备及其功能化 被引量:3
2
作者 杨惠芳 张旭 闫卫东 《功能材料》 EI CAS CSCD 北大核心 2009年第7期1159-1162,共4页
利用通过种子乳液的方法制备的粒径为1100nm的二氧化硅胶体晶为模板,采用配位聚合方式制备了孔径为1000nm的三维有序大孔间规聚苯乙烯材料,进而对其进行了氯甲基孔壁功能化。利用核磁共振、红外光谱、扫描电镜对产物进行了表征分析,结... 利用通过种子乳液的方法制备的粒径为1100nm的二氧化硅胶体晶为模板,采用配位聚合方式制备了孔径为1000nm的三维有序大孔间规聚苯乙烯材料,进而对其进行了氯甲基孔壁功能化。利用核磁共振、红外光谱、扫描电镜对产物进行了表征分析,结果表明间规结构的聚苯乙烯骨架结构表面引入了氯甲基基团,并且氯甲基化以后依然保持了原有大孔材料孔径均一、结构有序的特点。采用热重-滴定分析测定了相对氯含量为2.3mmol/g。 展开更多
关键词 三维有序大孔聚合物 间规聚苯乙烯 功能化 氯甲基化
在线阅读 下载PDF
三维有序交联聚苯乙烯大孔材料的制备及其功能化
3
作者 杨惠芳 张旭 闫卫东 《材料导报》 EI CAS CSCD 北大核心 2009年第10期79-82,共4页
利用二氧化硅模板法,采用苯乙烯-二乙烯基苯自由基共聚方法制备了孔径在200~1020nm的三维有序交联聚苯乙烯大孔材料,并在此基础上通过氯甲基化反应对所制备的有序孔材料进行孔壁功能化。对所制备的三位有序交联聚苯乙烯孔材料及氯甲基... 利用二氧化硅模板法,采用苯乙烯-二乙烯基苯自由基共聚方法制备了孔径在200~1020nm的三维有序交联聚苯乙烯大孔材料,并在此基础上通过氯甲基化反应对所制备的有序孔材料进行孔壁功能化。对所制备的三位有序交联聚苯乙烯孔材料及氯甲基化后的形貌进行了扫描电子显微镜表征。结果表明,所制备的有序孔材料孔径均一、结构有序,氯甲基化后的孔材料保持了原有孔材料的有序结构。红外光谱分析表明氯甲基基团已被成功地引入了有序孔材料,并且主要发生在苯环的对位。通过热重-滴定分析方法确定了引入到有序孔材料的氯相对含量为5.52mmol/g。 展开更多
关键词 三维有序大孔材料 交联聚苯乙烯 功能化 氯甲基化反应
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部