According to different damage modes,warheads are roughly divided into three types:fragmentation warheads,shaped charge warheads,and penetrating warheads.Due to limitations in material and structural manufacturing,trad...According to different damage modes,warheads are roughly divided into three types:fragmentation warheads,shaped charge warheads,and penetrating warheads.Due to limitations in material and structural manufacturing,traditional manufacturing methods make it difficult to fully utilize the damage ability of the warhead.Additive manufacturing(AM)technology can fabricate complex structures,with classified materials composition and customized components,while achieving low cost,high accuracy,and rapid production of the parts.The maturity of AM technology has brought about a new round of revolution in the field of warheads.In this paper,we first review the principles,classifications,and characteristics of different AM technologies.The development trends of AM technologies are pointed out,including multi-material AM technology,hybrid AM technology,and smart AM technology.From our survey,PBF,DED,and EBM technologies are mainly used to manufacture warhead damage elements.FDM and DIW technologies are mainly used to manufacture warhead charges.Then,the research on the application of AM technology in three types of warhead and warhead charges was reviewed and the existing problems and progress of AM technologies in each warhead were analyzed.Finally,we summarized the typical applications and look forward to the application prospects of AM technology in the field of warheads.展开更多
A measurement system for the scattering characteristics of warhead fragments based on high-speed imaging systems offers advantages such as simple deployment,flexible maneuverability,and high spatiotemporal resolution,...A measurement system for the scattering characteristics of warhead fragments based on high-speed imaging systems offers advantages such as simple deployment,flexible maneuverability,and high spatiotemporal resolution,enabling the acquisition of full-process data of the fragment scattering process.However,mismatches between camera frame rates and target velocities can lead to long motion blur tails of high-speed fragment targets,resulting in low signal-to-noise ratios and rendering conventional detection algorithms ineffective in dynamic strong interference testing environments.In this study,we propose a detection framework centered on dynamic strong interference disturbance signal separation and suppression.We introduce a mixture Gaussian model constrained under a joint spatialtemporal-transform domain Dirichlet process,combined with total variation regularization to achieve disturbance signal suppression.Experimental results demonstrate that the proposed disturbance suppression method can be integrated with certain conventional motion target detection tasks,enabling adaptation to real-world data to a certain extent.Moreover,we provide a specific implementation of this process,which achieves a detection rate close to 100%with an approximate 0%false alarm rate in multiple sets of real target field test data.This research effectively advances the development of the field of damage parameter testing.展开更多
The lethality of a semi-preformed fragment warhead is closely related to the expand velocity and spatial distribution of the fragments from ruptured metal casing. The topic of how to improve the utilization of charge ...The lethality of a semi-preformed fragment warhead is closely related to the expand velocity and spatial distribution of the fragments from ruptured metal casing. The topic of how to improve the utilization of charge of have been drawing great attention from researchers and designer in this filed. In present paper,in order to investigate the influence of charge initiation manners on the scattering characteristics of semi-preformed fragment warhead, the numerical simulations and experimental test are conducted.Firstly, the influence of grid density on numerical results is investigated, and a proper numerical model with relatively high accuracy and effectiveness is determined. Then. numerical simulations of three kinds of different initiation position of a semi-preformed fragment warhead are carried out. An experimental test of the explosion of a semi-preformed fragment warhead is carried out. By comparing and analyzing the numerical results and experimental data, it is found that the initiation manners have great influence on scattering characteristics of semi-preformed fragment warhead. The researcher work of this paper would provide an effective alternative method to optimize the design of warhead.展开更多
New advanced numerical computer model enabling accurate simulation of fragmentation parameters of large Length over Diameter(L/D)explosively driven metal shells has been developed and validated.The newly developed lar...New advanced numerical computer model enabling accurate simulation of fragmentation parameters of large Length over Diameter(L/D)explosively driven metal shells has been developed and validated.The newly developed large L/D multi-region model links three-dimensional axisymmetric high strain high strain-rate hydrocode analyses with the conventional set of Picatinny Arsenal FRAGmentation(PAFRAG)simulation routines.The standard PAFRAG modeling technique is based on the Mott's theory of break-up of idealized cylindrical"ring-bombs",in which the length of the average fragment is a function of the radius and velocity of the shell at the moment of break-up,and the mechanical properties of the metal.In the newly developed multi-region model,each of the shell region,the break-up is assumed to occur instantaneously,whereas the entire shell is modeled to fragment at multiple times,according to the number of the regions considered.According to PAFRAG methodology,the required input for both the natural and the controlled fragmentation models including the geometry and the velocity of the shell at moment of break-up had been provided from the hydrocode analyses and validated with available experimental data.The newly developed large L/D multi-region PAFRAG model has been shown to accurately reproduce available experimental fragmentation data.展开更多
The evaluation system of smart ammunition warhead overall efficiency has been established in this paper. Allkinds of evaluation methods have been analyzed. Having led the concept of hierarchical structure into techniq...The evaluation system of smart ammunition warhead overall efficiency has been established in this paper. Allkinds of evaluation methods have been analyzed. Having led the concept of hierarchical structure into technique for orderpreference by similarity to ideal solution (TOPSIS) method, we put forward the step TOPSIS method which is suitable forevaluating the overall efficiency of smart ammunition warheads. In the calculation of index weight, the graded weight cal-culus is put forward which hardly relies on the subjectivity of decision-makers and can reflect the sensitivity and compatibili-ty of the index. In the graded weight calculation, the proportional-arithmetic weight value calculus and sensitivity-compati-bility weight value calculus are given respectively.展开更多
With respect to the problems of that the shaped charge warhead currently uses a cover method to improve the penetration power, a method using an explosive network technology as the detonation mode of shaped charge war...With respect to the problems of that the shaped charge warhead currently uses a cover method to improve the penetration power, a method using an explosive network technology as the detonation mode of shaped charge warhead is proposed. In the context of some shaped charge warhead, a synchronous explosive network prototype is designed according to some charge structure parameters, such as the liner and main grain. From the performance comparison test, it can be known that the explosive network not only stably detonates, but also largely improves the penetration power and stability. Experimental results show that explosive network technology is an effective method for improving the penetration power. The results lay a solid foundation for the engineering application of the technology in the shaped charge warhead.展开更多
A projectile system is proposed to improve efficiency and effectiveness of damage done by anti-tank weapon system on its target by designing a ballistic projectile that can split into multiple warheads and engage a ta...A projectile system is proposed to improve efficiency and effectiveness of damage done by anti-tank weapon system on its target by designing a ballistic projectile that can split into multiple warheads and engage a target at the same time. This idea has been developed in interest of saving time consumed from the process of reloading and additional number of rounds wasted on target during an attack. The proposed system is achieved in three steps: Firstly, a mathematical model is prepared using the basic equations of motion. Second, An Ejection Mechanism of proposed warhead is explained with the help of schematics. Third, a part of numerical simulation which is done using the MATLAB software. The final result shows various ranges and times when split can be effectively achieved. With the new system,impact points are increased and hence it has a better probability of hitting a target.展开更多
For the characterization of the behaviors of a metal material in events like expanding warheads, it is necessary to know its strength and ductility at high strain rates, around 104e105/s. The flyer plate impact testin...For the characterization of the behaviors of a metal material in events like expanding warheads, it is necessary to know its strength and ductility at high strain rates, around 104e105/s. The flyer plate impact testing produces the uniform stress and strain rates but the testing is expensive. The Taylor test is relatively inexpensive but produces non-uniform stress and strain fields, and the results are not so easily inferred for material modeling. In the split-Hopkinson bar(SHB), which may be used in compression, tension and torsion testing, the strain rates never exceeds 103/s. In the present work, we use the expanding ring test where the strain rate is 104e105/s. A streak camera is used to examine the expanding ring velocity, and a water tank is used to collect the fragments. The experimental results are compared with the numerical simulations using the hydrocodes AUTODYN, IMPETUS Afea and a regularized smooth particle(RSPH) software. The number of fragments increases with the increase in the expansion velocity of the rings. The number of fragments is similar to the experimental results. The RSPH software shows much the same results as the AUTODYN where the Lagrangian solver is used for the ring. The IMPETUS Afea solver shows a somewhat different fragmentation characteristic due to the node splitting algorithm that induces pronounced tensile splitting.展开更多
The response characteristics of the warhead under thermal stimuli conditions are important to the safety improvement.The goal of this study is to obtain data on the warhead in the fast cook-off process.In this paper,a...The response characteristics of the warhead under thermal stimuli conditions are important to the safety improvement.The goal of this study is to obtain data on the warhead in the fast cook-off process.In this paper,a numerical calculation method is proposed,whose reliability is supported by comparison with experimental results.Through the numerical calculation,the temperature distribution,temperature change,and ignition time are acquired.The numerical results show that the ignition time is 76 s after the warhead started to burn and that the maximum temperature of the explosive’s outer surface is 238.3℃ at the ignition time.The fast cook-off experiment of the warhead is implemented so as to get the flame temperature and reaction grades that are not available through numerical calculation.The experimental results show that the overpressure fails to reach the preset minimumvalue which is equivalent to 6 kg of TNT and that the reaction grade is deflagration.The research results have reference value for the design of the warhead and the reduction of detonation risks.展开更多
Polymer bonded explosive(PBX)formulations were successfully prepared in the laboratory scale containing 1,1-diamino-2,2-dinitroethene(FOX-7)and hexogen(RDX)as brisant high explosives and different binder types of poly...Polymer bonded explosive(PBX)formulations were successfully prepared in the laboratory scale containing 1,1-diamino-2,2-dinitroethene(FOX-7)and hexogen(RDX)as brisant high explosives and different binder types of polyurethane(PU)based on glycidyl azide polymer(GAP) and hydroxyl-terminated polybutadiene(HTPB) as an energetic and inert polymeric binder respectively.Casting technique was used for the preparation of different PBX formulations based on FOX-7/RDX and PU(GAP/HTPB)with 14% binder.The sensitivity to different initial impulses and performance characteristics of the explosive and lethal zone of the tested controlled fragmentation warhead by the fragmentation warhead assessment test(arena test)were studied,in which the arena test was carried out with a controlled fragmentation warhead made from Ck45 steel,with dimensions(100 mm length,30 mm outer diameter and 3 mm thickness).Results show that PBXGF4 has lower sensitivity to impact and heat than those of PBXGR4 by 188.4% and 3.2% respectively.Its friction sensitivity is the same as that of PBXGR4.It has better performance,in which detonation velocity increases by 2.1% and brisance increases by 0.5% when compared with those of PBXGR4.It was concluded that PBXGF4 which based on FOX-7 bonded with PU/GAP matrix has good characteristics as PBX,specially in the sensitivity to impact and can be applied for replacing PBXs based on RDX in the advanced PBXs for low sensitive fragmentation warheads.展开更多
A novel simulation method for fuze warhead system (FWS) at very low altitude flight is proposed to solve adaptability issues of the traditional one in the naval battle. Firstly, a simulation system framework is presen...A novel simulation method for fuze warhead system (FWS) at very low altitude flight is proposed to solve adaptability issues of the traditional one in the naval battle. Firstly, a simulation system framework is presented. Then the detailed implementation of a novel general fuze model, a novel sea echo model and a novel warhead dynamic effectiveness power field algorithm including the simulation system are presented. Finally, simulation results show good performance of the proposed method. The proposed method can simulate the echo signal when the complex fuze antennas detect target and the sea at the same time, and can truly reflect the target positions hit by the warhead fragments. The proposed method can solve the existing problems in the FWS simulation system.展开更多
There has been increasing interest in numerical simulations of fragmentation of expanding warheads in 3D.Accordingly there is a pressure on developers of leading commercial codes,such as LS-DYNA.AUTODYN and IMPETUS Af...There has been increasing interest in numerical simulations of fragmentation of expanding warheads in 3D.Accordingly there is a pressure on developers of leading commercial codes,such as LS-DYNA.AUTODYN and IMPETUS Afea.to implement the reliable fracture models and the efficient solution techniques.The applicability of the Johnson—Cook strength and fracture model is evaluated by comparing the fracture behaviour of an expanding steel casing of a warhead with experiments.The numerical codes and different numerical solution techniques,such as Eulerian,Lagrangian.Smooth particle hydrodynamics(SPH).and the corpuscular models recently implemented in IMPETUS Afea are compared.For the same solution techniques and material models we find that the codes give similar results.The SPH technique and the corpuscular technique are superior to the Eulerian technique and the Lagrangian technique(with erosion) when it is applied to materials that have fluid like behaviour such as the explosive and the tracer.The Eulerian technique gives much larger calculation time and both the Lagrangian and Eulerian techniques seem to give less agreement with our measurements.To more correctly simulate the fracture behaviours of the expanding steel casing,we applied that ductility decreases with strain rate.The phenomena may be explained by the realization of adiabatic shear bands.An implemented node splitting algorithm in IMPETUS Afea seems very promising.展开更多
The double casing warhead with sandwiched charge is a novel fragmentation warhead that can produce two groups of fragments with different velocity,and the previous work has presented a calculation formula to determine...The double casing warhead with sandwiched charge is a novel fragmentation warhead that can produce two groups of fragments with different velocity,and the previous work has presented a calculation formula to determine the maximum fragment velocity.The current work builds on the published formula to further develop a formula for calculating the axial distribution characteristics of the fragment velocity.For this type of warhead,the simulation of the dispersion characteristics of the detonation products at different positions shows that the detonation products at the ends have a much larger axial velocity than those in the middle,and the detonation products have a greater axial dispersion velocity when they are closer to the central axis.The loading process and the fragment velocity vary with the axial position for both casing layers,and the total velocity of the fragments is the vector sum of the radial velocity and the axial velocity.At the same axial position,the acceleration time of the inner casing is greater than that of the outer casing.For the same casing,the fragments generated at the ends have a longer acceleration time than the fragments from the middle.The proposed formula is validated with the X-ray radiography results of the four warheads previously tested experimentally and the 3D smoothedparticle hydrodynamics numerical simulation results of several series of new warheads with different configurations.The formula can accurately and reliably calculate the fragment velocity when the lengthto-diameter ratio of the charge is greater than 1.5 and the thickness of the casing is less than 20%its inner radius.This work thus provides a key reference for the theoretical analysis and the design of warheads with multiple casings.展开更多
The new numerical approach for analysis of the warhead transportations is suggested.This approach allows to control the warhead operability before its experimental analysis.The approach is implemented by the adequate ...The new numerical approach for analysis of the warhead transportations is suggested.This approach allows to control the warhead operability before its experimental analysis.The approach is implemented by the adequate models for the software ANSYS.Analysis of the loads at land operations and transportations of the warhead by natural roads,water and aviation allows to obtain the maximal values of loads,which are used in numerical simulations of the warhead.These loads give an opportunity to analyze the operability and the fatigue strength of the cartridge warhead.The numerical simulations of the attachments of the warhead combat elements are performed on the basis of the suggested method.The data of the numerical simulations verifies the operability of the fastener system of the warhead combat elements.展开更多
Natural fragmentation of warheads that detonates causes the casing of the warhead to split into various sized fragments through shear or radial fractures depending on the toughness,density,and grain size of the materi...Natural fragmentation of warheads that detonates causes the casing of the warhead to split into various sized fragments through shear or radial fractures depending on the toughness,density,and grain size of the material.The best known formula for the prediction of the size distribution is the Mott formulae,which is further examined by Grady and Kipp by investigating more carefully the statistical most random way of portioning a given area into a number of entities.We examine the fragmentation behavior of radially expanding steel rings cut from a 25 mm warhead by using an in house smooth particle hydrodynamic(SPH) simulation code called REGULUS.Experimental results were compared with numerical results applying varying particle size and stochastic fracture strain.The numerically obtained number of fragments was consistent with experimental results.Increasing expansion velocity of the rings increases the number of fragments.Statistical variation of the material parameters influences the fragment characteristics,especially for low expansion velocities.A least square regression fit to the cumulative number of fragments by applying a generalized Mott distribution shows that the shape parameter is around 4 for the rings,which is in contrast to the Mott distribution with a shape parameter of 1/2.For initially polar distributed particles,we see signs of a bimodal cumulative fragment distribution.Adding statistical variation in material parameters of the fracture model causes the velocity numerical solutions to become less sensitive to changes in resolution for Cartesian distributed particles.展开更多
Tactical Ballistic Missile(TBM) class target neutralization by the fragment spray of a Fragment Generator Warhead(FGW) calls for quantification of fragment projection angle scatter to finalize the end game engagement ...Tactical Ballistic Missile(TBM) class target neutralization by the fragment spray of a Fragment Generator Warhead(FGW) calls for quantification of fragment projection angle scatter to finalize the end game engagement logic.For conventional axi-symmetric warhead,dispersion is assumed to be normal with a standard deviation of 3~O.However,such information is not available in case of FGW.Hence,a set of experiments are conducted to determine the dispersion of fragments.The experiments are conducted with a specific configuration of FGW in an identical arena to quantify the scatter and then verified its applicability to other configurations having a range of L/D and C/M ratios,and contoured fragmenting discs.From the experimental study,it is concluded that the scatter in projection angle follows normal distribution with a standard deviation of 0.75° at Chi-square significance level of 0.01(x_(0.99)~2).展开更多
With this communication we want to suggest the system ZrW2,a high-density and very hard intermetallic compound that reacts/burns highly exothermic with air at high temperature.This intermetallic phase should provide a...With this communication we want to suggest the system ZrW2,a high-density and very hard intermetallic compound that reacts/burns highly exothermic with air at high temperature.This intermetallic phase should provide a very suitable reactive material for warhead applications.展开更多
This paper presents a variational method for the fuse-warhead coordination design of an air-faced missile, which takes the distribution density of fragments for a variable and the totalprobability of kill of single mi...This paper presents a variational method for the fuse-warhead coordination design of an air-faced missile, which takes the distribution density of fragments for a variable and the totalprobability of kill of single missile against an air-target for an objective function.展开更多
High speed photography technique is potentially the most effective way to measure the motion parameter of warhead fragment benefiting from its advantages of high accuracy,high resolution and high efficiency.However,it...High speed photography technique is potentially the most effective way to measure the motion parameter of warhead fragment benefiting from its advantages of high accuracy,high resolution and high efficiency.However,it faces challenge in dense objects tracking and 3D trajectories reconstruction due to the characteristics of small size and dense distribution of fragment swarm.To address these challenges,this work presents a warhead fragments motion trajectories tracking and spatio-temporal distribution reconstruction method based on high-speed stereo photography.Firstly,background difference algorithm is utilized to extract the center and area of each fragment in the image sequence.Subsequently,a multi-object tracking(MOT)algorithm using Kalman filtering and Hungarian optimal assignment is developed to realize real-time and robust trajectories tracking of fragment swarm.To reconstruct 3D motion trajectories,a global stereo trajectories matching strategy is presented,which takes advantages of epipolar constraint and continuity constraint to correctly retrieve stereo correspondence followed by 3D trajectories refinement using polynomial fitting.Finally,the simulation and experimental results demonstrate that the proposed method can accurately track the motion trajectories and reconstruct the spatio-temporal distribution of 1.0×10^(3)fragments in a field of view(FOV)of 3.2 m×2.5 m,and the accuracy of the velocity estimation can achieve 98.6%.展开更多
The warhead of a ballistic missile may precess due to lateral moments during release. The resulting micro-Doppler effect is determined by parameters such as the target's motion state and size. A three-dimensional ...The warhead of a ballistic missile may precess due to lateral moments during release. The resulting micro-Doppler effect is determined by parameters such as the target's motion state and size. A three-dimensional reconstruction method for the precession warhead via the micro-Doppler analysis and inverse Radon transform(IRT) is proposed in this paper. The precession parameters are extracted by the micro-Doppler analysis from three radars, and the IRT is used to estimate the size of targe. The scatterers of the target can be reconstructed based on the above parameters. Simulation experimental results illustrate the effectiveness of the proposed method in this paper.展开更多
基金sponsored by the National Key Research and Development Program of China(Grant No.2022YFC3320500)the National Natural Science Foundation of China(Grant Nos.12372333,12221002 and 12072037)。
文摘According to different damage modes,warheads are roughly divided into three types:fragmentation warheads,shaped charge warheads,and penetrating warheads.Due to limitations in material and structural manufacturing,traditional manufacturing methods make it difficult to fully utilize the damage ability of the warhead.Additive manufacturing(AM)technology can fabricate complex structures,with classified materials composition and customized components,while achieving low cost,high accuracy,and rapid production of the parts.The maturity of AM technology has brought about a new round of revolution in the field of warheads.In this paper,we first review the principles,classifications,and characteristics of different AM technologies.The development trends of AM technologies are pointed out,including multi-material AM technology,hybrid AM technology,and smart AM technology.From our survey,PBF,DED,and EBM technologies are mainly used to manufacture warhead damage elements.FDM and DIW technologies are mainly used to manufacture warhead charges.Then,the research on the application of AM technology in three types of warhead and warhead charges was reviewed and the existing problems and progress of AM technologies in each warhead were analyzed.Finally,we summarized the typical applications and look forward to the application prospects of AM technology in the field of warheads.
文摘A measurement system for the scattering characteristics of warhead fragments based on high-speed imaging systems offers advantages such as simple deployment,flexible maneuverability,and high spatiotemporal resolution,enabling the acquisition of full-process data of the fragment scattering process.However,mismatches between camera frame rates and target velocities can lead to long motion blur tails of high-speed fragment targets,resulting in low signal-to-noise ratios and rendering conventional detection algorithms ineffective in dynamic strong interference testing environments.In this study,we propose a detection framework centered on dynamic strong interference disturbance signal separation and suppression.We introduce a mixture Gaussian model constrained under a joint spatialtemporal-transform domain Dirichlet process,combined with total variation regularization to achieve disturbance signal suppression.Experimental results demonstrate that the proposed disturbance suppression method can be integrated with certain conventional motion target detection tasks,enabling adaptation to real-world data to a certain extent.Moreover,we provide a specific implementation of this process,which achieves a detection rate close to 100%with an approximate 0%false alarm rate in multiple sets of real target field test data.This research effectively advances the development of the field of damage parameter testing.
基金supported by the Joint Foundation project for Young Scientists of Ministry of Education(6141A02033108)National Natural Science Foundation of China(11502180)
文摘The lethality of a semi-preformed fragment warhead is closely related to the expand velocity and spatial distribution of the fragments from ruptured metal casing. The topic of how to improve the utilization of charge of have been drawing great attention from researchers and designer in this filed. In present paper,in order to investigate the influence of charge initiation manners on the scattering characteristics of semi-preformed fragment warhead, the numerical simulations and experimental test are conducted.Firstly, the influence of grid density on numerical results is investigated, and a proper numerical model with relatively high accuracy and effectiveness is determined. Then. numerical simulations of three kinds of different initiation position of a semi-preformed fragment warhead are carried out. An experimental test of the explosion of a semi-preformed fragment warhead is carried out. By comparing and analyzing the numerical results and experimental data, it is found that the initiation manners have great influence on scattering characteristics of semi-preformed fragment warhead. The researcher work of this paper would provide an effective alternative method to optimize the design of warhead.
文摘New advanced numerical computer model enabling accurate simulation of fragmentation parameters of large Length over Diameter(L/D)explosively driven metal shells has been developed and validated.The newly developed large L/D multi-region model links three-dimensional axisymmetric high strain high strain-rate hydrocode analyses with the conventional set of Picatinny Arsenal FRAGmentation(PAFRAG)simulation routines.The standard PAFRAG modeling technique is based on the Mott's theory of break-up of idealized cylindrical"ring-bombs",in which the length of the average fragment is a function of the radius and velocity of the shell at the moment of break-up,and the mechanical properties of the metal.In the newly developed multi-region model,each of the shell region,the break-up is assumed to occur instantaneously,whereas the entire shell is modeled to fragment at multiple times,according to the number of the regions considered.According to PAFRAG methodology,the required input for both the natural and the controlled fragmentation models including the geometry and the velocity of the shell at moment of break-up had been provided from the hydrocode analyses and validated with available experimental data.The newly developed large L/D multi-region PAFRAG model has been shown to accurately reproduce available experimental fragmentation data.
文摘The evaluation system of smart ammunition warhead overall efficiency has been established in this paper. Allkinds of evaluation methods have been analyzed. Having led the concept of hierarchical structure into technique for orderpreference by similarity to ideal solution (TOPSIS) method, we put forward the step TOPSIS method which is suitable forevaluating the overall efficiency of smart ammunition warheads. In the calculation of index weight, the graded weight cal-culus is put forward which hardly relies on the subjectivity of decision-makers and can reflect the sensitivity and compatibili-ty of the index. In the graded weight calculation, the proportional-arithmetic weight value calculus and sensitivity-compati-bility weight value calculus are given respectively.
文摘With respect to the problems of that the shaped charge warhead currently uses a cover method to improve the penetration power, a method using an explosive network technology as the detonation mode of shaped charge warhead is proposed. In the context of some shaped charge warhead, a synchronous explosive network prototype is designed according to some charge structure parameters, such as the liner and main grain. From the performance comparison test, it can be known that the explosive network not only stably detonates, but also largely improves the penetration power and stability. Experimental results show that explosive network technology is an effective method for improving the penetration power. The results lay a solid foundation for the engineering application of the technology in the shaped charge warhead.
文摘A projectile system is proposed to improve efficiency and effectiveness of damage done by anti-tank weapon system on its target by designing a ballistic projectile that can split into multiple warheads and engage a target at the same time. This idea has been developed in interest of saving time consumed from the process of reloading and additional number of rounds wasted on target during an attack. The proposed system is achieved in three steps: Firstly, a mathematical model is prepared using the basic equations of motion. Second, An Ejection Mechanism of proposed warhead is explained with the help of schematics. Third, a part of numerical simulation which is done using the MATLAB software. The final result shows various ranges and times when split can be effectively achieved. With the new system,impact points are increased and hence it has a better probability of hitting a target.
文摘For the characterization of the behaviors of a metal material in events like expanding warheads, it is necessary to know its strength and ductility at high strain rates, around 104e105/s. The flyer plate impact testing produces the uniform stress and strain rates but the testing is expensive. The Taylor test is relatively inexpensive but produces non-uniform stress and strain fields, and the results are not so easily inferred for material modeling. In the split-Hopkinson bar(SHB), which may be used in compression, tension and torsion testing, the strain rates never exceeds 103/s. In the present work, we use the expanding ring test where the strain rate is 104e105/s. A streak camera is used to examine the expanding ring velocity, and a water tank is used to collect the fragments. The experimental results are compared with the numerical simulations using the hydrocodes AUTODYN, IMPETUS Afea and a regularized smooth particle(RSPH) software. The number of fragments increases with the increase in the expansion velocity of the rings. The number of fragments is similar to the experimental results. The RSPH software shows much the same results as the AUTODYN where the Lagrangian solver is used for the ring. The IMPETUS Afea solver shows a somewhat different fragmentation characteristic due to the node splitting algorithm that induces pronounced tensile splitting.
文摘The response characteristics of the warhead under thermal stimuli conditions are important to the safety improvement.The goal of this study is to obtain data on the warhead in the fast cook-off process.In this paper,a numerical calculation method is proposed,whose reliability is supported by comparison with experimental results.Through the numerical calculation,the temperature distribution,temperature change,and ignition time are acquired.The numerical results show that the ignition time is 76 s after the warhead started to burn and that the maximum temperature of the explosive’s outer surface is 238.3℃ at the ignition time.The fast cook-off experiment of the warhead is implemented so as to get the flame temperature and reaction grades that are not available through numerical calculation.The experimental results show that the overpressure fails to reach the preset minimumvalue which is equivalent to 6 kg of TNT and that the reaction grade is deflagration.The research results have reference value for the design of the warhead and the reduction of detonation risks.
文摘Polymer bonded explosive(PBX)formulations were successfully prepared in the laboratory scale containing 1,1-diamino-2,2-dinitroethene(FOX-7)and hexogen(RDX)as brisant high explosives and different binder types of polyurethane(PU)based on glycidyl azide polymer(GAP) and hydroxyl-terminated polybutadiene(HTPB) as an energetic and inert polymeric binder respectively.Casting technique was used for the preparation of different PBX formulations based on FOX-7/RDX and PU(GAP/HTPB)with 14% binder.The sensitivity to different initial impulses and performance characteristics of the explosive and lethal zone of the tested controlled fragmentation warhead by the fragmentation warhead assessment test(arena test)were studied,in which the arena test was carried out with a controlled fragmentation warhead made from Ck45 steel,with dimensions(100 mm length,30 mm outer diameter and 3 mm thickness).Results show that PBXGF4 has lower sensitivity to impact and heat than those of PBXGR4 by 188.4% and 3.2% respectively.Its friction sensitivity is the same as that of PBXGR4.It has better performance,in which detonation velocity increases by 2.1% and brisance increases by 0.5% when compared with those of PBXGR4.It was concluded that PBXGF4 which based on FOX-7 bonded with PU/GAP matrix has good characteristics as PBX,specially in the sensitivity to impact and can be applied for replacing PBXs based on RDX in the advanced PBXs for low sensitive fragmentation warheads.
文摘A novel simulation method for fuze warhead system (FWS) at very low altitude flight is proposed to solve adaptability issues of the traditional one in the naval battle. Firstly, a simulation system framework is presented. Then the detailed implementation of a novel general fuze model, a novel sea echo model and a novel warhead dynamic effectiveness power field algorithm including the simulation system are presented. Finally, simulation results show good performance of the proposed method. The proposed method can simulate the echo signal when the complex fuze antennas detect target and the sea at the same time, and can truly reflect the target positions hit by the warhead fragments. The proposed method can solve the existing problems in the FWS simulation system.
文摘There has been increasing interest in numerical simulations of fragmentation of expanding warheads in 3D.Accordingly there is a pressure on developers of leading commercial codes,such as LS-DYNA.AUTODYN and IMPETUS Afea.to implement the reliable fracture models and the efficient solution techniques.The applicability of the Johnson—Cook strength and fracture model is evaluated by comparing the fracture behaviour of an expanding steel casing of a warhead with experiments.The numerical codes and different numerical solution techniques,such as Eulerian,Lagrangian.Smooth particle hydrodynamics(SPH).and the corpuscular models recently implemented in IMPETUS Afea are compared.For the same solution techniques and material models we find that the codes give similar results.The SPH technique and the corpuscular technique are superior to the Eulerian technique and the Lagrangian technique(with erosion) when it is applied to materials that have fluid like behaviour such as the explosive and the tracer.The Eulerian technique gives much larger calculation time and both the Lagrangian and Eulerian techniques seem to give less agreement with our measurements.To more correctly simulate the fracture behaviours of the expanding steel casing,we applied that ductility decreases with strain rate.The phenomena may be explained by the realization of adiabatic shear bands.An implemented node splitting algorithm in IMPETUS Afea seems very promising.
基金supported by the National Natural Science Foundation of China(Grant No.11872121)。
文摘The double casing warhead with sandwiched charge is a novel fragmentation warhead that can produce two groups of fragments with different velocity,and the previous work has presented a calculation formula to determine the maximum fragment velocity.The current work builds on the published formula to further develop a formula for calculating the axial distribution characteristics of the fragment velocity.For this type of warhead,the simulation of the dispersion characteristics of the detonation products at different positions shows that the detonation products at the ends have a much larger axial velocity than those in the middle,and the detonation products have a greater axial dispersion velocity when they are closer to the central axis.The loading process and the fragment velocity vary with the axial position for both casing layers,and the total velocity of the fragments is the vector sum of the radial velocity and the axial velocity.At the same axial position,the acceleration time of the inner casing is greater than that of the outer casing.For the same casing,the fragments generated at the ends have a longer acceleration time than the fragments from the middle.The proposed formula is validated with the X-ray radiography results of the four warheads previously tested experimentally and the 3D smoothedparticle hydrodynamics numerical simulation results of several series of new warheads with different configurations.The formula can accurately and reliably calculate the fragment velocity when the lengthto-diameter ratio of the charge is greater than 1.5 and the thickness of the casing is less than 20%its inner radius.This work thus provides a key reference for the theoretical analysis and the design of warheads with multiple casings.
文摘The new numerical approach for analysis of the warhead transportations is suggested.This approach allows to control the warhead operability before its experimental analysis.The approach is implemented by the adequate models for the software ANSYS.Analysis of the loads at land operations and transportations of the warhead by natural roads,water and aviation allows to obtain the maximal values of loads,which are used in numerical simulations of the warhead.These loads give an opportunity to analyze the operability and the fatigue strength of the cartridge warhead.The numerical simulations of the attachments of the warhead combat elements are performed on the basis of the suggested method.The data of the numerical simulations verifies the operability of the fastener system of the warhead combat elements.
文摘Natural fragmentation of warheads that detonates causes the casing of the warhead to split into various sized fragments through shear or radial fractures depending on the toughness,density,and grain size of the material.The best known formula for the prediction of the size distribution is the Mott formulae,which is further examined by Grady and Kipp by investigating more carefully the statistical most random way of portioning a given area into a number of entities.We examine the fragmentation behavior of radially expanding steel rings cut from a 25 mm warhead by using an in house smooth particle hydrodynamic(SPH) simulation code called REGULUS.Experimental results were compared with numerical results applying varying particle size and stochastic fracture strain.The numerically obtained number of fragments was consistent with experimental results.Increasing expansion velocity of the rings increases the number of fragments.Statistical variation of the material parameters influences the fragment characteristics,especially for low expansion velocities.A least square regression fit to the cumulative number of fragments by applying a generalized Mott distribution shows that the shape parameter is around 4 for the rings,which is in contrast to the Mott distribution with a shape parameter of 1/2.For initially polar distributed particles,we see signs of a bimodal cumulative fragment distribution.Adding statistical variation in material parameters of the fracture model causes the velocity numerical solutions to become less sensitive to changes in resolution for Cartesian distributed particles.
文摘Tactical Ballistic Missile(TBM) class target neutralization by the fragment spray of a Fragment Generator Warhead(FGW) calls for quantification of fragment projection angle scatter to finalize the end game engagement logic.For conventional axi-symmetric warhead,dispersion is assumed to be normal with a standard deviation of 3~O.However,such information is not available in case of FGW.Hence,a set of experiments are conducted to determine the dispersion of fragments.The experiments are conducted with a specific configuration of FGW in an identical arena to quantify the scatter and then verified its applicability to other configurations having a range of L/D and C/M ratios,and contoured fragmenting discs.From the experimental study,it is concluded that the scatter in projection angle follows normal distribution with a standard deviation of 0.75° at Chi-square significance level of 0.01(x_(0.99)~2).
文摘With this communication we want to suggest the system ZrW2,a high-density and very hard intermetallic compound that reacts/burns highly exothermic with air at high temperature.This intermetallic phase should provide a very suitable reactive material for warhead applications.
文摘This paper presents a variational method for the fuse-warhead coordination design of an air-faced missile, which takes the distribution density of fragments for a variable and the totalprobability of kill of single missile against an air-target for an objective function.
基金Key Basic Research Project of Strengthening the Foundations Plan of China (Grant No.2019-JCJQ-ZD-360-12)National Defense Basic Scientific Research Program of China (Grant No.JCKY2021208B011)to provide fund for conducting experiments。
文摘High speed photography technique is potentially the most effective way to measure the motion parameter of warhead fragment benefiting from its advantages of high accuracy,high resolution and high efficiency.However,it faces challenge in dense objects tracking and 3D trajectories reconstruction due to the characteristics of small size and dense distribution of fragment swarm.To address these challenges,this work presents a warhead fragments motion trajectories tracking and spatio-temporal distribution reconstruction method based on high-speed stereo photography.Firstly,background difference algorithm is utilized to extract the center and area of each fragment in the image sequence.Subsequently,a multi-object tracking(MOT)algorithm using Kalman filtering and Hungarian optimal assignment is developed to realize real-time and robust trajectories tracking of fragment swarm.To reconstruct 3D motion trajectories,a global stereo trajectories matching strategy is presented,which takes advantages of epipolar constraint and continuity constraint to correctly retrieve stereo correspondence followed by 3D trajectories refinement using polynomial fitting.Finally,the simulation and experimental results demonstrate that the proposed method can accurately track the motion trajectories and reconstruct the spatio-temporal distribution of 1.0×10^(3)fragments in a field of view(FOV)of 3.2 m×2.5 m,and the accuracy of the velocity estimation can achieve 98.6%.
基金supported by the National Natural Science Foundation of China (61871146)the Fundamental Research Funds for the Central Universities (FRFCU5710093720)。
文摘The warhead of a ballistic missile may precess due to lateral moments during release. The resulting micro-Doppler effect is determined by parameters such as the target's motion state and size. A three-dimensional reconstruction method for the precession warhead via the micro-Doppler analysis and inverse Radon transform(IRT) is proposed in this paper. The precession parameters are extracted by the micro-Doppler analysis from three radars, and the IRT is used to estimate the size of targe. The scatterers of the target can be reconstructed based on the above parameters. Simulation experimental results illustrate the effectiveness of the proposed method in this paper.
