In order to improve the detection accuracy of Doppler asymmetric spatial heterodyne(DASH)interferometer in harsh temperatures,an opto-mechanical-thermal integration analysis is carried out.Firstly,the correlation betw...In order to improve the detection accuracy of Doppler asymmetric spatial heterodyne(DASH)interferometer in harsh temperatures,an opto-mechanical-thermal integration analysis is carried out.Firstly,the correlation between the interference phase and temperature is established according to the working principle and the phase algorithm of the interferometer.Secondly,the optical mechanical thermal analysis model and thermal deformation data acquisition model are designed.The deformation data of the interference module and the imaging optical system at different temperatures are given by temperature load simulation analysis,and the phase error caused by thermal deformation is obtained by fitting.Finally,based on the wind speed error caused by thermal deformation of each component,a reasonable temperature control scheme is proposed.The results show that the interference module occupies the main cause,the temperature must be controlled within(20±0.05)℃,and the temperature control should be carried out for the temperature sensitive parts,and the wind speed error caused by the part is 3.8 m/s.The thermal drift between the magnification of the imaging optical system and the thermal drift of the relative position between the imaging optical system and the detector should occupy the secondary cause,which should be controlled within(20±2)℃,and the wind speed error caused by the part is 3.05 m/s.In summary,the wind measurement error caused by interference module,imaging optical system,and the relative position between the imaging optical system and the detector can be controlled within 6.85 m/s.The analysis and temperature control schemes presented in this paper can provide theoretical basis for DASH interferometer engineering applications.展开更多
长波红外差分干涉仪在低温工况下会因光学元件受到非均匀应力作用产生干涉条纹的畸变,从而降低干涉仪系统性能。本文为解决低温工况干涉条纹弯曲畸变问题,基于长波红外差分干涉仪光机系统进行了干涉条纹畸变影响因素分析,结合光-机-热...长波红外差分干涉仪在低温工况下会因光学元件受到非均匀应力作用产生干涉条纹的畸变,从而降低干涉仪系统性能。本文为解决低温工况干涉条纹弯曲畸变问题,基于长波红外差分干涉仪光机系统进行了干涉条纹畸变影响因素分析,结合光-机-热耦合分析方法,对干涉仪系统低温工作状态进行仿真。随后设计了针对影响条纹畸变的关键元件——光栅元件的低温微应力动态稳定支撑安装结构,结构优化后的光栅表面面形均方根(Root Mean Square,RMS)值为3.89×10^(-2) nm,面形峰谷值(Peak to Valley,PV)值为2.21×10^(-1) nm,分别较优化前初始系统的分析结果减小了5个数量级,系统仿真干涉条纹畸变小于1个探测器像元。全系统低温验证试验表明,优化结构可有效抑制干涉条纹畸变,畸变量小于2个探测器像元,试验与仿真计算结果一致性较好,验证了优化分析方法的有效性。该优化方案对提升反射式光学系统结构低温稳定性,提高系统工作能力有较大意义和价值。展开更多
文摘In order to improve the detection accuracy of Doppler asymmetric spatial heterodyne(DASH)interferometer in harsh temperatures,an opto-mechanical-thermal integration analysis is carried out.Firstly,the correlation between the interference phase and temperature is established according to the working principle and the phase algorithm of the interferometer.Secondly,the optical mechanical thermal analysis model and thermal deformation data acquisition model are designed.The deformation data of the interference module and the imaging optical system at different temperatures are given by temperature load simulation analysis,and the phase error caused by thermal deformation is obtained by fitting.Finally,based on the wind speed error caused by thermal deformation of each component,a reasonable temperature control scheme is proposed.The results show that the interference module occupies the main cause,the temperature must be controlled within(20±0.05)℃,and the temperature control should be carried out for the temperature sensitive parts,and the wind speed error caused by the part is 3.8 m/s.The thermal drift between the magnification of the imaging optical system and the thermal drift of the relative position between the imaging optical system and the detector should occupy the secondary cause,which should be controlled within(20±2)℃,and the wind speed error caused by the part is 3.05 m/s.In summary,the wind measurement error caused by interference module,imaging optical system,and the relative position between the imaging optical system and the detector can be controlled within 6.85 m/s.The analysis and temperature control schemes presented in this paper can provide theoretical basis for DASH interferometer engineering applications.
文摘长波红外差分干涉仪在低温工况下会因光学元件受到非均匀应力作用产生干涉条纹的畸变,从而降低干涉仪系统性能。本文为解决低温工况干涉条纹弯曲畸变问题,基于长波红外差分干涉仪光机系统进行了干涉条纹畸变影响因素分析,结合光-机-热耦合分析方法,对干涉仪系统低温工作状态进行仿真。随后设计了针对影响条纹畸变的关键元件——光栅元件的低温微应力动态稳定支撑安装结构,结构优化后的光栅表面面形均方根(Root Mean Square,RMS)值为3.89×10^(-2) nm,面形峰谷值(Peak to Valley,PV)值为2.21×10^(-1) nm,分别较优化前初始系统的分析结果减小了5个数量级,系统仿真干涉条纹畸变小于1个探测器像元。全系统低温验证试验表明,优化结构可有效抑制干涉条纹畸变,畸变量小于2个探测器像元,试验与仿真计算结果一致性较好,验证了优化分析方法的有效性。该优化方案对提升反射式光学系统结构低温稳定性,提高系统工作能力有较大意义和价值。
