Lead magnesium niobate-lead titanate(PMN-PT)piezoelectric single crystals are widely utilized due to their outstanding performance,with varying compositions significantly impacting their properties.While application o...Lead magnesium niobate-lead titanate(PMN-PT)piezoelectric single crystals are widely utilized due to their outstanding performance,with varying compositions significantly impacting their properties.While application of PMN-PT in high-power settings is rapidly evolving,material parameters are typically tested under low signal conditions(1 V),and effects of different PT(PbTiO_(3))contents on the performance of PMN-PT single crystals under high-power conditions remain unclear.This study developed a comprehensive high-power testing platform using the constant voltage method to evaluate performance of PMN-PT single crystals with different PT contents under high-power voltage stimulation.Using crystals sized at 10 mm×3 mm×0.5 mm as an example,this research explored changes in material parameters.The results exhibit that while trend of the parameter changes under high-power excitation was consistent across different PT contents,degree of the change varied significantly.For instance,a PMN-PT single crystal with 26%(in mol)PT content exhibited a 25%increase in the piezoelectric coefficient d_(31),a 13%increase in the elastic compliance coefficient s_(11)^(E),a 17%increase in the electromechanical coupling coefficient k_(31),and a 73%decrease in the mechanical quality factor Q_(m) when the power reached 7.90 W.As the PT content increased,the PMN-PT materials became more susceptible to temperature influences,significantly reducing the power tolerance and more readily reaching the depolarization temperatures.This led to loss of piezoelectric performance.Based on these findings,a clearer understanding of impact of PT content on performance of PMN-PT single crystals under high-power applications has been established,providing reliable data to support design of sensors or transducers using PMN-PT as the sensitive element.展开更多
In this paper,we investigate the periodic traveling wave solutions problem for a single population model with advection and distributed delay.By the bifurcation analysis method,we can obtain periodic traveling wave so...In this paper,we investigate the periodic traveling wave solutions problem for a single population model with advection and distributed delay.By the bifurcation analysis method,we can obtain periodic traveling wave solutions for this model under the influence of advection term and distributed delay.The obtained results indicate that weak kernel and strong kernel can both deduce the existence of periodic traveling wave solutions.Finally,we apply the main results in this paper to Logistic model and Nicholson’s blowflies model.展开更多
Organic semiconductor materials have shown unique advantages in the development of optoelectronic devices due to their ease of preparation,low cost,lightweight,and flexibility.In this work,we explored the application ...Organic semiconductor materials have shown unique advantages in the development of optoelectronic devices due to their ease of preparation,low cost,lightweight,and flexibility.In this work,we explored the application of the organic semiconductor Y6-1O single crystal in photodetection devices.Firstly,Y6-1O single crystal material was prepared on a silicon substrate using solution droplet casting method.The optical properties of Y6-1O material were characterized by polarized optical microscopy,fluorescence spectroscopy,etc.,confirming its highly single crystalline performance and emission properties in the near-infrared region.Phototransistors based on Y6-1O materials with different thicknesses were then fabricated and tested.It was found that the devices exhibited good visible to near-infrared photoresponse,with the maximum photoresponse in the near-infrared region at 785 nm.The photocurrent on/off ratio reaches 10^(2),and photoresponsivity reaches 16 mA/W.It was also found that the spectral response of the device could be regulated by gate voltage as well as the material thickness,providing important conditions for optimizing the performance of near-infrared photodetectors.This study not only demonstrates the excellent performance of organic phototransistors based on Y6-1O single crystal material in near-infrared detection but also provides new ideas and directions for the future development of infrared detectors.展开更多
Electrocatalytic reduction of carbon dioxide(CO_(2))to carbon monoxide(CO)is an effective strategy to achieve carbon neutrality.High selective and low-cost catalysts for the electrocatalytic reduction of CO_(2)have re...Electrocatalytic reduction of carbon dioxide(CO_(2))to carbon monoxide(CO)is an effective strategy to achieve carbon neutrality.High selective and low-cost catalysts for the electrocatalytic reduction of CO_(2)have received increasing attention.In contrast to the conventional tube furnace method,the high-temperature shock(HTS)method enables ultra-fast thermal processing,superior atomic efficiency,and a streamlined synthesis protocol,offering a simplified method for the preparation of high-performance single-atom catalysts(SACs).The reports have shown that nickel-based SACs can be synthesized quickly and conveniently using the HTS method,making their application in CO_(2)reduction reactions(CO_(2)RR)a viable and promising avenue for further exploration.In this study,the effect of heating temperature,metal loading and different nitrogen(N)sources on the catalyst morphology,coordination environment and electrocatalytic performance were investigated.Under optimal conditions,0.05Ni-DCD-C-1050 showed excellent performance in reducing CO_(2)to CO,with CO selectivity close to 100%(−0.7 to−1.0 V vs RHE)and current density as high as 130 mA/cm^(2)(−1.1 V vs RHE)in a flow cell under alkaline environment.展开更多
A tetranuclear Ln(Ⅲ)-based complex:[Dy_(4)(dbm)_(4)(L)_(6)(μ_(3)-OH)_(2)]·CH_(3)CN(1)(HL=5-[(4-methylbenzylidene)amino]quinolin-8-ol,Hdbm=dibenzoylmethane)was manufactured and its structure was characterized in...A tetranuclear Ln(Ⅲ)-based complex:[Dy_(4)(dbm)_(4)(L)_(6)(μ_(3)-OH)_(2)]·CH_(3)CN(1)(HL=5-[(4-methylbenzylidene)amino]quinolin-8-ol,Hdbm=dibenzoylmethane)was manufactured and its structure was characterized in detail.Xray diffraction analysis shows that complex 1 belongs to the monoclinic crystal system and its space group is P2_1/n,which contains a rhombic Dy_(4)core.Magnetic measurements of 1 suggest it possesses extraordinary single-molecule magnet(SMM)behavior.Its energy barrier U_(eff)/k_(B)was 116.7 K,and the pre-exponential coefficient τ_(0)=1.05×10~(-8)s.CCDC:2359322.展开更多
As a typical solid waste from the iron and steel,the mechanical properties of steel slag are regarded as the core basis for realizing its resource recycling.To explore the influence of shape and external loading speed...As a typical solid waste from the iron and steel,the mechanical properties of steel slag are regarded as the core basis for realizing its resource recycling.To explore the influence of shape and external loading speed on the crushing characteristics of steel slag,single particle crushing tests were carried out.The research focuses on the correlation between parameters such as the load−displacement relationship of single particles,crushing mode,crushing energy,and Weibull modulus,as well as external loading rate and quantified morphological parameters.The results show that the single particle crushing modes of steel slag mainly consist of three modes:through-splitting,complete fragmentation and local cutting;Compared with natural aggregates or recycled materials,steel slag particles are found to potentially exhibit higher compressive strength and the increase in loading rate further accelerates the occurrence of particle crushing behavior;Significant impacts on the crushing mode and characteristic stress of steel slag particles are exerted by their shape differences,and the energy release mode is jointly regulated by shape and loading rate.This research provides theoretical guidance and technical support for the diversified utilization of steel slag single particles,a new type of solid waste resource.展开更多
An analysis of the interaction mechanisms between a Shaped Charge Jet(SCJ) and a single Moving Plate(MP) is proposed in this article using both experimental and numerical approaches. First, an experimental set-up is p...An analysis of the interaction mechanisms between a Shaped Charge Jet(SCJ) and a single Moving Plate(MP) is proposed in this article using both experimental and numerical approaches. First, an experimental set-up is presented. Four collision tests have been performed: two tests in Backward Moving Plate(BMP) configuration, where the plate moves in opposition to jet, and two tests in Forward Moving Plate(FMP) configuration, where the plate moves alongside the jet. Based on the virtual origin approximation,a methodology(the Virtual Origin Method, VOM) is developed to extract quantities from the X-ray images, which serve as comparative data. γSPH simulations are carried out to complete the analysis, as they well capture the disturbance dynamics observed in the experiments. Based on these complementary experimental and numerical results, a new physical description is proposed through a detailed analysis of the interaction. It is shown that the SCJ/MP interaction is driven at first order by the contact geometry. Thus, BMP and FMP configurations do not generate the same disturbances because their local flow geometries are different. In the collision point frame of reference, the BMP flows in the same direction as the jet, causing its overall deflection. On the contrary, the FMP flow opposes that of the jet leading to an alternative creation of fragments and ligaments. An in-depth study, using the VOM shows that deflection angles, fragment-ligament creation frequencies, and deflection velocities evolve as the interaction progresses through slower jet elements.展开更多
Although real-world experiences show that preparing one image per person is more convenient, most of the appearance-based face recognition methods degrade or fail to work if there is only a single sample per person(SS...Although real-world experiences show that preparing one image per person is more convenient, most of the appearance-based face recognition methods degrade or fail to work if there is only a single sample per person(SSPP). In this work, we introduce a novel supervised learning method called supervised locality preserving multimanifold(SLPMM) for face recognition with SSPP. In SLPMM, two graphs: within-manifold graph and between-manifold graph are made to represent the information inside every manifold and the information among different manifolds, respectively. SLPMM simultaneously maximizes the between-manifold scatter and minimizes the within-manifold scatter which leads to discriminant space by adopting locality preserving projection(LPP) concept. Experimental results on two widely used face databases FERET and AR face database are presented to prove the efficacy of the proposed approach.展开更多
A single bubble trapped at an antinode of an acoustic standing wave field in water can emit 50ps-140ps light pulses, called “single bubble sonoluminescence” (SBSL). It arouses much interest in physical acoustics bec...A single bubble trapped at an antinode of an acoustic standing wave field in water can emit 50ps-140ps light pulses, called “single bubble sonoluminescence” (SBSL). It arouses much interest in physical acoustics because of its highly non-linear characteristics, high concentration of energy, and stable cavitation behavior. In this paper, bubble stability, the dynamic behavior of bubbles, non-invasive measurement of driving acoustic pressure and Mie scattering method are introduced.展开更多
A Bayesian estimation method to separate multicomponent signals with single channel observation is presented in this paper. By using the basis function projection, the component separation becomes a problem of limited...A Bayesian estimation method to separate multicomponent signals with single channel observation is presented in this paper. By using the basis function projection, the component separation becomes a problem of limited parameter estimation. Then, a Bayesian model for estimating parameters is set up. The reversible jump MCMC （Monte Carlo Markov Chain） algorithmis adopted to perform the Bayesian computation. The method can jointly estimate the parameters of each component and the component number. Simulation results demonstrate that the method has low SNR threshold and better performance.展开更多
Focusing on the single machine scheduling problem which minimizes the total completion time in the presence of dynamic job arrivals, a rolling optimization scheduling algorithm is proposed based on the analysis of the...Focusing on the single machine scheduling problem which minimizes the total completion time in the presence of dynamic job arrivals, a rolling optimization scheduling algorithm is proposed based on the analysis of the character and structure of scheduling. An optimal scheduling strategy in collision window is presented. Performance evaluation of this algorithm is given. Simulation indicates that the proposed algorithm is better than other common heuristic algorithms on both the total performance and stability.展开更多
A new method based on phase difference analysis is proposed for the single-channel mixed signal separation of single-channel radar fuze.This method is used to estimate the mixing coefficients of de-noised signals thro...A new method based on phase difference analysis is proposed for the single-channel mixed signal separation of single-channel radar fuze.This method is used to estimate the mixing coefficients of de-noised signals through the cumulants of mixed signals,solve the candidate data set by the mixing coefficients and signal analytical form,and resolve the problem of vector ambiguity by analyzing the phase differences.The signal separation is realized by exchanging data of the solutions.The waveform similarity coefficients are calculated,and the time鈥攆requency distributions of separated signals are analyzed.The results show that the proposed method is effective.展开更多
Based on the theory of the passive hydrogen maser, along with the technology of frequency modulation and modulation transfer spectroscopy, the theoretical expression of the single frequency modulation for the passive ...Based on the theory of the passive hydrogen maser, along with the technology of frequency modulation and modulation transfer spectroscopy, the theoretical expression of the single frequency modulation for the passive hydrogen maser and the function of the cavity and H line error signals separation are derived, which are basically coincident with the experiment. The absorption and dispersion spectrum curves with different resonance widths show that the cavity and hydrogen transition serve as discriminators, and the two error signals can be separated. Through the calculations of the two error signals in the passive hydrogen maser, it analyzes the traditional method of the two error signals separation, and then describes a new improved method for the passive hydrogen servo loops consisting in the use of a single modulation frequency and frequency discrimination. A null interaction of the two error signals for the new selection of the phase setting is deduced theoretically and validated by the simulation. The preliminary experimental result confirms the feasibility of this new approach, which can reduce the influence from the cavity frequency variety on the crystal oscillator and contribute significantly to the long term performance of the passive hydrogen maser.展开更多
During the grinding of optical glass, the abrasion directly affects the morphology and depth of subsurface cracks(SSC). The effect of dynamic impact of grinding abrasives on optical glass is an important issue in the ...During the grinding of optical glass, the abrasion directly affects the morphology and depth of subsurface cracks(SSC). The effect of dynamic impact of grinding abrasives on optical glass is an important issue in the field of optics manufacturing. In this work, a single diamond scratch was used to grind optical glass, and grinding parameters were collaboratively controlled to ensure that the cutting layer remained constant. A dynamometer was used to record the duration of the impact process, and the cross-section of the test piece was polished for scanning electron microscopy(SEM) to determine the depth of the SSCs. The experimental results show that as wheel speed increases, SSC depth tends to decrease. When the wheel speed gradually increases from 500 r/min to 2500 r/min, the probability distribution curve for the maximum SSC depth shifts downward by around 80 μm. The effect of the dynamic impact of single diamond scratch is found to be an important cause of SSC formation in optical glass during grinding, i.e., the faster the grinding, the shallower the SSCs.展开更多
The single machine scheduling problem which involves uncertain job due dates is one of the most important issues in the real make-to-order environment. To deal with the uncertainty, this paper establishes a robust opt...The single machine scheduling problem which involves uncertain job due dates is one of the most important issues in the real make-to-order environment. To deal with the uncertainty, this paper establishes a robust optimization model by minimizing the maximum tardiness in the worst case scenario over all jobs. Unlike the traditional stochastic programming model which requires exact distributions, our model only needs the information of due date intervals. The worst case scenario for a given sequence that belongs to a set containing only n scenarios is proved, where n is the number of jobs. Then, the model is simplified and reformulated as an equivalent mixed 0-1 integer linear programming(MILP) problem. To solve the MILP problems efficiently, a heuristic approach is proposed based on a robust dominance rule. The experimental results show that the proposed method has the advantages of robustness and high calculating efficiency, and it is feasible for large-scale problems.展开更多
Low cost and miniaturized rotary encoders are important in automatic and precise production. Presented here is a code called Single Track Cyclic Gray Code (STCGC) that is an image etched on a single circular track of ...Low cost and miniaturized rotary encoders are important in automatic and precise production. Presented here is a code called Single Track Cyclic Gray Code (STCGC) that is an image etched on a single circular track of a rotary encoder disk read by a group of even spread reading heads to provide a unique codeword for every angular position and features such that every two adjacent words differ in exactly one component, thus avoiding coarse error. The existing construction or combination methods are helpful but not sufficient in determining the period of the STCGC of large word length and the theoretical approach needs further development to extend the word length. Three principles, such as the seed combination, short code removal and ergodicity examination were put forward that suffice determination of the optimal period for such absolute rotary encoders using STCGC with even spread heads. The optimal periods of STCGC in 3 through 29 bit length were determined and listed.展开更多
基金Research and Development Project on Voltage Sensors by China Southern Power Grid Digital Research Institute(210000KK52220017)。
文摘Lead magnesium niobate-lead titanate(PMN-PT)piezoelectric single crystals are widely utilized due to their outstanding performance,with varying compositions significantly impacting their properties.While application of PMN-PT in high-power settings is rapidly evolving,material parameters are typically tested under low signal conditions(1 V),and effects of different PT(PbTiO_(3))contents on the performance of PMN-PT single crystals under high-power conditions remain unclear.This study developed a comprehensive high-power testing platform using the constant voltage method to evaluate performance of PMN-PT single crystals with different PT contents under high-power voltage stimulation.Using crystals sized at 10 mm×3 mm×0.5 mm as an example,this research explored changes in material parameters.The results exhibit that while trend of the parameter changes under high-power excitation was consistent across different PT contents,degree of the change varied significantly.For instance,a PMN-PT single crystal with 26%(in mol)PT content exhibited a 25%increase in the piezoelectric coefficient d_(31),a 13%increase in the elastic compliance coefficient s_(11)^(E),a 17%increase in the electromechanical coupling coefficient k_(31),and a 73%decrease in the mechanical quality factor Q_(m) when the power reached 7.90 W.As the PT content increased,the PMN-PT materials became more susceptible to temperature influences,significantly reducing the power tolerance and more readily reaching the depolarization temperatures.This led to loss of piezoelectric performance.Based on these findings,a clearer understanding of impact of PT content on performance of PMN-PT single crystals under high-power applications has been established,providing reliable data to support design of sensors or transducers using PMN-PT as the sensitive element.
基金Supported by the National Natural Science Foundation of China(12261050)Science and Technology Project of Department of Education of Jiangxi Province(GJJ2201612 and GJJ211027)Natural Science Foundation of Jiangxi Province of China(20212BAB202021)。
文摘In this paper,we investigate the periodic traveling wave solutions problem for a single population model with advection and distributed delay.By the bifurcation analysis method,we can obtain periodic traveling wave solutions for this model under the influence of advection term and distributed delay.The obtained results indicate that weak kernel and strong kernel can both deduce the existence of periodic traveling wave solutions.Finally,we apply the main results in this paper to Logistic model and Nicholson’s blowflies model.
基金Supported by the National Key Research and Development Program of China(2021YFB2012601)National Natural Science Foundation of China(12204109)+1 种基金Science and Technology Innovation Plan of Shanghai Science and Technology Commission(21JC1400200)Higher Education Indus⁃try Support Program of Gansu Province(2022CYZC-06)。
文摘Organic semiconductor materials have shown unique advantages in the development of optoelectronic devices due to their ease of preparation,low cost,lightweight,and flexibility.In this work,we explored the application of the organic semiconductor Y6-1O single crystal in photodetection devices.Firstly,Y6-1O single crystal material was prepared on a silicon substrate using solution droplet casting method.The optical properties of Y6-1O material were characterized by polarized optical microscopy,fluorescence spectroscopy,etc.,confirming its highly single crystalline performance and emission properties in the near-infrared region.Phototransistors based on Y6-1O materials with different thicknesses were then fabricated and tested.It was found that the devices exhibited good visible to near-infrared photoresponse,with the maximum photoresponse in the near-infrared region at 785 nm.The photocurrent on/off ratio reaches 10^(2),and photoresponsivity reaches 16 mA/W.It was also found that the spectral response of the device could be regulated by gate voltage as well as the material thickness,providing important conditions for optimizing the performance of near-infrared photodetectors.This study not only demonstrates the excellent performance of organic phototransistors based on Y6-1O single crystal material in near-infrared detection but also provides new ideas and directions for the future development of infrared detectors.
基金supported by the National Key R&D Program of China(2024YFB4106400)National Natural Science Foundation of China(22209200,52302331)。
文摘Electrocatalytic reduction of carbon dioxide(CO_(2))to carbon monoxide(CO)is an effective strategy to achieve carbon neutrality.High selective and low-cost catalysts for the electrocatalytic reduction of CO_(2)have received increasing attention.In contrast to the conventional tube furnace method,the high-temperature shock(HTS)method enables ultra-fast thermal processing,superior atomic efficiency,and a streamlined synthesis protocol,offering a simplified method for the preparation of high-performance single-atom catalysts(SACs).The reports have shown that nickel-based SACs can be synthesized quickly and conveniently using the HTS method,making their application in CO_(2)reduction reactions(CO_(2)RR)a viable and promising avenue for further exploration.In this study,the effect of heating temperature,metal loading and different nitrogen(N)sources on the catalyst morphology,coordination environment and electrocatalytic performance were investigated.Under optimal conditions,0.05Ni-DCD-C-1050 showed excellent performance in reducing CO_(2)to CO,with CO selectivity close to 100%(−0.7 to−1.0 V vs RHE)and current density as high as 130 mA/cm^(2)(−1.1 V vs RHE)in a flow cell under alkaline environment.
文摘A tetranuclear Ln(Ⅲ)-based complex:[Dy_(4)(dbm)_(4)(L)_(6)(μ_(3)-OH)_(2)]·CH_(3)CN(1)(HL=5-[(4-methylbenzylidene)amino]quinolin-8-ol,Hdbm=dibenzoylmethane)was manufactured and its structure was characterized in detail.Xray diffraction analysis shows that complex 1 belongs to the monoclinic crystal system and its space group is P2_1/n,which contains a rhombic Dy_(4)core.Magnetic measurements of 1 suggest it possesses extraordinary single-molecule magnet(SMM)behavior.Its energy barrier U_(eff)/k_(B)was 116.7 K,and the pre-exponential coefficient τ_(0)=1.05×10~(-8)s.CCDC:2359322.
基金Project(52025085)supported by the National Science Foundation for Distinguished Young Scholars of ChinaProjects(52208421,52408394)supported by the National Natural Science Foundation of China+2 种基金Project(2023JJ40050)supported by the Hunan Provincial Natural Science Foundation,ChinaProject(2024JJ1001)supported by the Science Fund for Creative Research Groups of Hunan Provincial Natural Science Foundation,ChinaProject(kfj210201)supported by the Open Fund of the Key Laboratory of Highway Engineering of Ministry of Education(Changsha University of Science&Technology),China。
文摘As a typical solid waste from the iron and steel,the mechanical properties of steel slag are regarded as the core basis for realizing its resource recycling.To explore the influence of shape and external loading speed on the crushing characteristics of steel slag,single particle crushing tests were carried out.The research focuses on the correlation between parameters such as the load−displacement relationship of single particles,crushing mode,crushing energy,and Weibull modulus,as well as external loading rate and quantified morphological parameters.The results show that the single particle crushing modes of steel slag mainly consist of three modes:through-splitting,complete fragmentation and local cutting;Compared with natural aggregates or recycled materials,steel slag particles are found to potentially exhibit higher compressive strength and the increase in loading rate further accelerates the occurrence of particle crushing behavior;Significant impacts on the crushing mode and characteristic stress of steel slag particles are exerted by their shape differences,and the energy release mode is jointly regulated by shape and loading rate.This research provides theoretical guidance and technical support for the diversified utilization of steel slag single particles,a new type of solid waste resource.
基金supported by the Ministère des Armées,and the Agence de l'Innovation de Défense(AID).
文摘An analysis of the interaction mechanisms between a Shaped Charge Jet(SCJ) and a single Moving Plate(MP) is proposed in this article using both experimental and numerical approaches. First, an experimental set-up is presented. Four collision tests have been performed: two tests in Backward Moving Plate(BMP) configuration, where the plate moves in opposition to jet, and two tests in Forward Moving Plate(FMP) configuration, where the plate moves alongside the jet. Based on the virtual origin approximation,a methodology(the Virtual Origin Method, VOM) is developed to extract quantities from the X-ray images, which serve as comparative data. γSPH simulations are carried out to complete the analysis, as they well capture the disturbance dynamics observed in the experiments. Based on these complementary experimental and numerical results, a new physical description is proposed through a detailed analysis of the interaction. It is shown that the SCJ/MP interaction is driven at first order by the contact geometry. Thus, BMP and FMP configurations do not generate the same disturbances because their local flow geometries are different. In the collision point frame of reference, the BMP flows in the same direction as the jet, causing its overall deflection. On the contrary, the FMP flow opposes that of the jet leading to an alternative creation of fragments and ligaments. An in-depth study, using the VOM shows that deflection angles, fragment-ligament creation frequencies, and deflection velocities evolve as the interaction progresses through slower jet elements.
文摘Although real-world experiences show that preparing one image per person is more convenient, most of the appearance-based face recognition methods degrade or fail to work if there is only a single sample per person(SSPP). In this work, we introduce a novel supervised learning method called supervised locality preserving multimanifold(SLPMM) for face recognition with SSPP. In SLPMM, two graphs: within-manifold graph and between-manifold graph are made to represent the information inside every manifold and the information among different manifolds, respectively. SLPMM simultaneously maximizes the between-manifold scatter and minimizes the within-manifold scatter which leads to discriminant space by adopting locality preserving projection(LPP) concept. Experimental results on two widely used face databases FERET and AR face database are presented to prove the efficacy of the proposed approach.
文摘A single bubble trapped at an antinode of an acoustic standing wave field in water can emit 50ps-140ps light pulses, called “single bubble sonoluminescence” (SBSL). It arouses much interest in physical acoustics because of its highly non-linear characteristics, high concentration of energy, and stable cavitation behavior. In this paper, bubble stability, the dynamic behavior of bubbles, non-invasive measurement of driving acoustic pressure and Mie scattering method are introduced.
文摘A Bayesian estimation method to separate multicomponent signals with single channel observation is presented in this paper. By using the basis function projection, the component separation becomes a problem of limited parameter estimation. Then, a Bayesian model for estimating parameters is set up. The reversible jump MCMC （Monte Carlo Markov Chain） algorithmis adopted to perform the Bayesian computation. The method can jointly estimate the parameters of each component and the component number. Simulation results demonstrate that the method has low SNR threshold and better performance.
文摘Focusing on the single machine scheduling problem which minimizes the total completion time in the presence of dynamic job arrivals, a rolling optimization scheduling algorithm is proposed based on the analysis of the character and structure of scheduling. An optimal scheduling strategy in collision window is presented. Performance evaluation of this algorithm is given. Simulation indicates that the proposed algorithm is better than other common heuristic algorithms on both the total performance and stability.
文摘A new method based on phase difference analysis is proposed for the single-channel mixed signal separation of single-channel radar fuze.This method is used to estimate the mixing coefficients of de-noised signals through the cumulants of mixed signals,solve the candidate data set by the mixing coefficients and signal analytical form,and resolve the problem of vector ambiguity by analyzing the phase differences.The signal separation is realized by exchanging data of the solutions.The waveform similarity coefficients are calculated,and the time鈥攆requency distributions of separated signals are analyzed.The results show that the proposed method is effective.
基金supported by the Next Generation of Beidou Navigation Satellite(GFZX0301020104)
文摘Based on the theory of the passive hydrogen maser, along with the technology of frequency modulation and modulation transfer spectroscopy, the theoretical expression of the single frequency modulation for the passive hydrogen maser and the function of the cavity and H line error signals separation are derived, which are basically coincident with the experiment. The absorption and dispersion spectrum curves with different resonance widths show that the cavity and hydrogen transition serve as discriminators, and the two error signals can be separated. Through the calculations of the two error signals in the passive hydrogen maser, it analyzes the traditional method of the two error signals separation, and then describes a new improved method for the passive hydrogen servo loops consisting in the use of a single modulation frequency and frequency discrimination. A null interaction of the two error signals for the new selection of the phase setting is deduced theoretically and validated by the simulation. The preliminary experimental result confirms the feasibility of this new approach, which can reduce the influence from the cavity frequency variety on the crystal oscillator and contribute significantly to the long term performance of the passive hydrogen maser.
基金Project(51175126)supported by National Natural Science Foundation of China(NSFC)Project(2011CB013202)supported by the National Basic Research Program(973 Program)of China
文摘During the grinding of optical glass, the abrasion directly affects the morphology and depth of subsurface cracks(SSC). The effect of dynamic impact of grinding abrasives on optical glass is an important issue in the field of optics manufacturing. In this work, a single diamond scratch was used to grind optical glass, and grinding parameters were collaboratively controlled to ensure that the cutting layer remained constant. A dynamometer was used to record the duration of the impact process, and the cross-section of the test piece was polished for scanning electron microscopy(SEM) to determine the depth of the SSCs. The experimental results show that as wheel speed increases, SSC depth tends to decrease. When the wheel speed gradually increases from 500 r/min to 2500 r/min, the probability distribution curve for the maximum SSC depth shifts downward by around 80 μm. The effect of the dynamic impact of single diamond scratch is found to be an important cause of SSC formation in optical glass during grinding, i.e., the faster the grinding, the shallower the SSCs.
基金supported by the National Natural Science Foundation of China(61503211,U1660202)。
文摘The single machine scheduling problem which involves uncertain job due dates is one of the most important issues in the real make-to-order environment. To deal with the uncertainty, this paper establishes a robust optimization model by minimizing the maximum tardiness in the worst case scenario over all jobs. Unlike the traditional stochastic programming model which requires exact distributions, our model only needs the information of due date intervals. The worst case scenario for a given sequence that belongs to a set containing only n scenarios is proved, where n is the number of jobs. Then, the model is simplified and reformulated as an equivalent mixed 0-1 integer linear programming(MILP) problem. To solve the MILP problems efficiently, a heuristic approach is proposed based on a robust dominance rule. The experimental results show that the proposed method has the advantages of robustness and high calculating efficiency, and it is feasible for large-scale problems.
基金Project(JX2004J0170) supported by the Foundation of Beijing Jiaotong University, China
文摘Low cost and miniaturized rotary encoders are important in automatic and precise production. Presented here is a code called Single Track Cyclic Gray Code (STCGC) that is an image etched on a single circular track of a rotary encoder disk read by a group of even spread reading heads to provide a unique codeword for every angular position and features such that every two adjacent words differ in exactly one component, thus avoiding coarse error. The existing construction or combination methods are helpful but not sufficient in determining the period of the STCGC of large word length and the theoretical approach needs further development to extend the word length. Three principles, such as the seed combination, short code removal and ergodicity examination were put forward that suffice determination of the optimal period for such absolute rotary encoders using STCGC with even spread heads. The optimal periods of STCGC in 3 through 29 bit length were determined and listed.
