Fuel cell stacks as the automotive power source can be severely poisoned by a trace amount of NOx in atmosphere,which makes it necessary to provide clean air for fuel cell vehicles.In this work,activating commercial a...Fuel cell stacks as the automotive power source can be severely poisoned by a trace amount of NOx in atmosphere,which makes it necessary to provide clean air for fuel cell vehicles.In this work,activating commercial activated carbons with K2CO3 for the large enhancement of NO capture was studied.K2CO3 modified activated carbons(K2CO3 ACs)were prepared by impregnating activate carbons in K2CO3 solution under ultrasound treatment,followed by temperature programmed baking at 800 oC.The dynamic NO flow tests on K2CO3 ACs at room temperature indicated that NO adsorption capacity reached the maximum(96 mg/g)when K2CO3 loading was 19.5 wt%,which corresponded to a specific surface area of 1196.1 m2/g and total pore volume of 0.70 cm3/g.The ten-fold enhancement of NO adsorption on K2CO3 ACs compared to the unimpregnated activated carbon was mainly attributed to the formation of potassium nitrite,which was confirmed by FTIR and temperature programmed desorption measurements.Regeneration tests of NO adsorption on the optimum sample revealed that 76%of the NO adsorption capacity could be remained after the fourth cycle.展开更多
Co/Al2O3 Fischer-Tropsch synthesis catalysts with different cobalt loadings were prepared using incipient wetness impregnation method. The effects of cobalt loading on the properties of catalysts were studied by means...Co/Al2O3 Fischer-Tropsch synthesis catalysts with different cobalt loadings were prepared using incipient wetness impregnation method. The effects of cobalt loading on the properties of catalysts were studied by means of X-ray diffraction （XRD）, temperature programmed reduction （TPR）, hydrogen temperature programmed desorption （H2-TPD） and O2 titration. Co-support compound formation can be detected in catalyst system by XRD. For the Co/Al2O3 catalysts with low cobalt loading, CoAl2O4 phase appears visibly. Two different reduction regions can be presented for Co/Al2O3 catalysts, which belong to Co3O4 crystallites （reduction at 320 ℃） and cobalt oxide-alumina interaction species （reduction at above 400 ℃）. Increasing Co loading results in the increase of Co3O4 crystallite size. The reduced Co/Al2O3 catalysts have two adsorption sites, and cobalt loading greatly influences the adsorption behavior. With the increase of cobalt loading, the amount of low temperature adsorption is increased, the amount of high temperature adsorption is decreased, and the percentage reduction and cobalt crystallite size are increased.展开更多
基金Project(2018YFB0105303)supported by the Ministry of Science and Technology of ChinaProject(17DZ1200702)supported by the Shanghai Science and Technology Committee,China
文摘Fuel cell stacks as the automotive power source can be severely poisoned by a trace amount of NOx in atmosphere,which makes it necessary to provide clean air for fuel cell vehicles.In this work,activating commercial activated carbons with K2CO3 for the large enhancement of NO capture was studied.K2CO3 modified activated carbons(K2CO3 ACs)were prepared by impregnating activate carbons in K2CO3 solution under ultrasound treatment,followed by temperature programmed baking at 800 oC.The dynamic NO flow tests on K2CO3 ACs at room temperature indicated that NO adsorption capacity reached the maximum(96 mg/g)when K2CO3 loading was 19.5 wt%,which corresponded to a specific surface area of 1196.1 m2/g and total pore volume of 0.70 cm3/g.The ten-fold enhancement of NO adsorption on K2CO3 ACs compared to the unimpregnated activated carbon was mainly attributed to the formation of potassium nitrite,which was confirmed by FTIR and temperature programmed desorption measurements.Regeneration tests of NO adsorption on the optimum sample revealed that 76%of the NO adsorption capacity could be remained after the fourth cycle.
文摘Co/Al2O3 Fischer-Tropsch synthesis catalysts with different cobalt loadings were prepared using incipient wetness impregnation method. The effects of cobalt loading on the properties of catalysts were studied by means of X-ray diffraction （XRD）, temperature programmed reduction （TPR）, hydrogen temperature programmed desorption （H2-TPD） and O2 titration. Co-support compound formation can be detected in catalyst system by XRD. For the Co/Al2O3 catalysts with low cobalt loading, CoAl2O4 phase appears visibly. Two different reduction regions can be presented for Co/Al2O3 catalysts, which belong to Co3O4 crystallites （reduction at 320 ℃） and cobalt oxide-alumina interaction species （reduction at above 400 ℃）. Increasing Co loading results in the increase of Co3O4 crystallite size. The reduced Co/Al2O3 catalysts have two adsorption sites, and cobalt loading greatly influences the adsorption behavior. With the increase of cobalt loading, the amount of low temperature adsorption is increased, the amount of high temperature adsorption is decreased, and the percentage reduction and cobalt crystallite size are increased.
