Mountain tunnel crossing a normal fault in seismically active zone is easily affected by normal fault slip and earthquake. It is necessary to study tunnel dynamic response under action of normal fault slip and earthqu...Mountain tunnel crossing a normal fault in seismically active zone is easily affected by normal fault slip and earthquake. It is necessary to study tunnel dynamic response under action of normal fault slip and earthquake. In this paper, a three-dimensional normal fault sliding device was designed, and a shaking table test was carried out to study tunnel seismic performance under normal fault slip. The results show that peak acceleration of lining is dominated by an existence of fault and direction of seismic excitation, not normal fault slip. And the incremental strains of lining in critical zone with 1.7 times fault thickness and centered in faults induced by normal fault slip and seismic excitation are larger than ones only by seismic excitation. And the incremental strains in critical zone increase with the increase of normal fault slip magnitude ranging from 0 to 2 mm. And normal fault slip results in a significant reduction of overall tunnel stiffness subjected to an earthquake. These experimental results provide a scientific reference for prevention and control measurement of tunnel damage under earthquake and normal fault slip.展开更多
In order to meet the severe requirements of market and reduce production costs of high quality steels,advanced run-out table cooling based on ultra fast cooling(UFC) and laminar cooling(LC) was proposed and applied to...In order to meet the severe requirements of market and reduce production costs of high quality steels,advanced run-out table cooling based on ultra fast cooling(UFC) and laminar cooling(LC) was proposed and applied to industrial production.Cooling mechanism of UFC and LC was introduced first,and then the control system and control models were described.By using UFC and LC,low-cost Q345B strips had been produced in a large scale,and industrial trials of producing low-cost dual phase strips were completed successfully.Application results show that the ultra fast cooling is uniform along the strip width and length,and does not affect the flatness of strips.The run-out table cooling system runs stably with a high precision,and makes it possible for the user to develop more high quality steels with low costs.展开更多
The BeiDou software receiver uses the fast Fourier transform(FFT)to perform the acquisition.The Doppler shift estimation accuracy should be less than 500 Hz to ensure satellite signals to enter a locked state in the t...The BeiDou software receiver uses the fast Fourier transform(FFT)to perform the acquisition.The Doppler shift estimation accuracy should be less than 500 Hz to ensure satellite signals to enter a locked state in the tracking loop.Since the frequency step is usually 500 Hz or larger,the Doppler shift estimation accuracy cannot guarantee that satellite signals are brought into a stable tracking state.The straightforward solutions consist in increasing the sampling time and using zero-padding to improve the frequency resolution of the FFT.However,these solutions intensify the complexity and amount of computation.The contradiction between the acquisition accuracy and the computational load leads us to research for a more simple and effective algorithm,which achieves fine acquisition by a look-up table.After coarse acquisition using the parallel frequency acquisition(PFA)algorithm,the proposed algorithm optimizes the Doppler shift estimation through the look-up table method based on the FFT results to improve the acquisition accuracy of the Doppler shift with a minimal additional computing load.When the Doppler shift is within the queryable range of the table,the proposed algorithm can improve the Doppler shift estimation accuracy to 50 Hz for the BeiDou B1I signal.展开更多
When conducting dynamic tests of underground structure by a rigid container, reasonable boundary conditions are one of the essential factors related to the accuracy of test results, especially the artificial boundary ...When conducting dynamic tests of underground structure by a rigid container, reasonable boundary conditions are one of the essential factors related to the accuracy of test results, especially the artificial boundary perpendicular to the excitation direction. On the basis of numerous studies, shaking table tests with four different typical boundaries are performed in this study. The tests consider the seismic intensity and seismic wave types. Then, the simulation effects of the four boundary conditions are evaluated from four aspects as follows: the differential rate of peak acceleration, acceleration curve, similarity of Fourier frequency spectra, and uneven soil settlement in rigid containers. Results show that the simulation effects of the boundary conditions are not only affected by the nature of the boundary material but also related to the seismic intensity, types of seismic waves, and filter characteristic of the filling medium in containers. In comparison with the other three types of boundary condition, foamed polyethylene shows the best simulation effect and its effect decreases gradually with the increase in earthquake intensity. Finally, on the basis of existing studies, the evaluation criteria of boundary effect, the principle for the selection of boundary material type and the thickness of boundary material are discussed and summarized, and the corresponding design methods and suggestions are then provided.展开更多
In order to improve the process precision of an XY laser annealing table, a geometric error modeling, and an identification and compensation method were proposed. Based on multi-body system theory, a geometric error m...In order to improve the process precision of an XY laser annealing table, a geometric error modeling, and an identification and compensation method were proposed. Based on multi-body system theory, a geometric error model for the laser annealing table was established. It supports the identification of 7 geometric errors affecting the annealing accuracy. An original identification method was presented to recognize these geometric errors. Positioning errors of 5 lines in the workspace were measured by a laser interferometer, and the 7 geometric errors were identified by the proposed algorithm. Finally, a software-based error compensation method was adopted, and a compensation mechanism was developed in a postprocessor based on LabVIEW. The identified geometric errors can be compensated by converting ideal NC codes to actual NC codes. A validation experiment has been conducted on the laser annealing table, and the results indicate that positioning errors of two validation lines decreased from ±37 μm and ±33 μm to ±5 μm and ±4.5 μm, respectively. The geometric error modeling, identification and compensation method presented in this work can be straightforwardly extended to any configurations of 2-dimensional worktable.展开更多
As far as the weighted digraph is considered, an optimal directed spanning tree algorithm called table based algorithm (TBA) is proposed in the paper based on the table instead of the weighted digraph. The optimality ...As far as the weighted digraph is considered, an optimal directed spanning tree algorithm called table based algorithm (TBA) is proposed in the paper based on the table instead of the weighted digraph. The optimality is proved, and a numerical example is demonstrated.展开更多
As far as the weight digraph is considered, based on the table instead of the weightdigraph, an optimal spanning tree method called the Table Operations Method (TOM) is proposed.And the optimality is proved and a nume...As far as the weight digraph is considered, based on the table instead of the weightdigraph, an optimal spanning tree method called the Table Operations Method (TOM) is proposed.And the optimality is proved and a numerical example is demonstrated.展开更多
The stability and reliability of a tilting index table should be considered at the design stage. A design method for the lightweight and improvement of the stability of the structure in a tilting index table was propo...The stability and reliability of a tilting index table should be considered at the design stage. A design method for the lightweight and improvement of the stability of the structure in a tilting index table was proposed using a commercial analysis program, ANSYS Workbench 12, by analyzing the static-thermal characteristics of the developed high-accuracy tilting index table at its design stage. The results of the performed structural analysis show that the maximum stress is generated at the stock tail part. An optimum design for the stock tail part was carried out to reduce the maximum stress and deformation. Also, the design variables were determined by considering the support of the stock tail part for the C-axis body. In the comparison of the results before and after the optimization, the maximum deformation and stress are improved by 2.8% and 8%, respectively.展开更多
In this paper we propose procedures to enhance testability by adding transitions of undefined states to state transition tables. In these procedures, transitions about undefined states, which are not described in stat...In this paper we propose procedures to enhance testability by adding transitions of undefined states to state transition tables. In these procedures, transitions about undefined states, which are not described in state transition tables but exist in a synthesized gate level circuit, are added to a state transition table. Experimental results for MCNC benchmarks are shown.展开更多
A new two-stage soft real-time scheduling algorithm based on priority table was proposed for task dispatch and selection in cluster systems with inaccurate parameters. The inaccurate characteristics of the system were...A new two-stage soft real-time scheduling algorithm based on priority table was proposed for task dispatch and selection in cluster systems with inaccurate parameters. The inaccurate characteristics of the system were modeled through probability analysis. By taking into account the multiple important system parameters, including task deadline, priority, session integrity and memory access locality, the algorithm is expected to achieve high quality of service. Lots of simulation results collected under different load conditions demonstrate that the algorithm can not only effectively overcome the inaccuracy of the system state, but also optimize the task rejected ratio, value realized ratio, differentiated service guaranteed ratio, and session integrity ensured ratio with the average improvement of 3.5%, 5.8%, 7.6% and 5. 5%, respectively. Compared with many existing schemes that cannen deal with the inaccurate parameters of the system, the proposed scheme can achieve the best system performance by carefully adjusting scheduling probability. The algorithm is expected to be promising in systems with soft real-time scheduling requirement such as E-commerce applications.展开更多
基金Project(51674287)supported by the National Natural Science Foundation of China。
文摘Mountain tunnel crossing a normal fault in seismically active zone is easily affected by normal fault slip and earthquake. It is necessary to study tunnel dynamic response under action of normal fault slip and earthquake. In this paper, a three-dimensional normal fault sliding device was designed, and a shaking table test was carried out to study tunnel seismic performance under normal fault slip. The results show that peak acceleration of lining is dominated by an existence of fault and direction of seismic excitation, not normal fault slip. And the incremental strains of lining in critical zone with 1.7 times fault thickness and centered in faults induced by normal fault slip and seismic excitation are larger than ones only by seismic excitation. And the incremental strains in critical zone increase with the increase of normal fault slip magnitude ranging from 0 to 2 mm. And normal fault slip results in a significant reduction of overall tunnel stiffness subjected to an earthquake. These experimental results provide a scientific reference for prevention and control measurement of tunnel damage under earthquake and normal fault slip.
基金Project(50634030) supported by the National Natural Science Foundation of China
文摘In order to meet the severe requirements of market and reduce production costs of high quality steels,advanced run-out table cooling based on ultra fast cooling(UFC) and laminar cooling(LC) was proposed and applied to industrial production.Cooling mechanism of UFC and LC was introduced first,and then the control system and control models were described.By using UFC and LC,low-cost Q345B strips had been produced in a large scale,and industrial trials of producing low-cost dual phase strips were completed successfully.Application results show that the ultra fast cooling is uniform along the strip width and length,and does not affect the flatness of strips.The run-out table cooling system runs stably with a high precision,and makes it possible for the user to develop more high quality steels with low costs.
基金the Open Project of State Key Laboratory of Automotive Simulation and Control,Jilin University(20161108)the National Natural Science Foundation of China(51505221)the Fundamental Research Funds for the Central Universities(NS2019022).
文摘The BeiDou software receiver uses the fast Fourier transform(FFT)to perform the acquisition.The Doppler shift estimation accuracy should be less than 500 Hz to ensure satellite signals to enter a locked state in the tracking loop.Since the frequency step is usually 500 Hz or larger,the Doppler shift estimation accuracy cannot guarantee that satellite signals are brought into a stable tracking state.The straightforward solutions consist in increasing the sampling time and using zero-padding to improve the frequency resolution of the FFT.However,these solutions intensify the complexity and amount of computation.The contradiction between the acquisition accuracy and the computational load leads us to research for a more simple and effective algorithm,which achieves fine acquisition by a look-up table.After coarse acquisition using the parallel frequency acquisition(PFA)algorithm,the proposed algorithm optimizes the Doppler shift estimation through the look-up table method based on the FFT results to improve the acquisition accuracy of the Doppler shift with a minimal additional computing load.When the Doppler shift is within the queryable range of the table,the proposed algorithm can improve the Doppler shift estimation accuracy to 50 Hz for the BeiDou B1I signal.
基金Projects(51978669,U1734208)supported by the National Natural Science Foundation of ChinaProject(2018JJ3657)supported by the Natural Science Foundation of Hunan Province,China
文摘When conducting dynamic tests of underground structure by a rigid container, reasonable boundary conditions are one of the essential factors related to the accuracy of test results, especially the artificial boundary perpendicular to the excitation direction. On the basis of numerous studies, shaking table tests with four different typical boundaries are performed in this study. The tests consider the seismic intensity and seismic wave types. Then, the simulation effects of the four boundary conditions are evaluated from four aspects as follows: the differential rate of peak acceleration, acceleration curve, similarity of Fourier frequency spectra, and uneven soil settlement in rigid containers. Results show that the simulation effects of the boundary conditions are not only affected by the nature of the boundary material but also related to the seismic intensity, types of seismic waves, and filter characteristic of the filling medium in containers. In comparison with the other three types of boundary condition, foamed polyethylene shows the best simulation effect and its effect decreases gradually with the increase in earthquake intensity. Finally, on the basis of existing studies, the evaluation criteria of boundary effect, the principle for the selection of boundary material type and the thickness of boundary material are discussed and summarized, and the corresponding design methods and suggestions are then provided.
基金Projects(2012ZX04010-011,2009ZX02037-02) supported by the Key National Science and Technology Project of China
文摘In order to improve the process precision of an XY laser annealing table, a geometric error modeling, and an identification and compensation method were proposed. Based on multi-body system theory, a geometric error model for the laser annealing table was established. It supports the identification of 7 geometric errors affecting the annealing accuracy. An original identification method was presented to recognize these geometric errors. Positioning errors of 5 lines in the workspace were measured by a laser interferometer, and the 7 geometric errors were identified by the proposed algorithm. Finally, a software-based error compensation method was adopted, and a compensation mechanism was developed in a postprocessor based on LabVIEW. The identified geometric errors can be compensated by converting ideal NC codes to actual NC codes. A validation experiment has been conducted on the laser annealing table, and the results indicate that positioning errors of two validation lines decreased from ±37 μm and ±33 μm to ±5 μm and ±4.5 μm, respectively. The geometric error modeling, identification and compensation method presented in this work can be straightforwardly extended to any configurations of 2-dimensional worktable.
基金the National Natural Science Foundation of China (No. 79870030).
文摘As far as the weighted digraph is considered, an optimal directed spanning tree algorithm called table based algorithm (TBA) is proposed in the paper based on the table instead of the weighted digraph. The optimality is proved, and a numerical example is demonstrated.
文摘As far as the weight digraph is considered, based on the table instead of the weightdigraph, an optimal spanning tree method called the Table Operations Method (TOM) is proposed.And the optimality is proved and a numerical example is demonstrated.
基金Project(70004782) supported by the Regional Strategic Technology Development Program of the Ministry of Knowledge Economy(MKE) of KoreaProject(2011-0017407) supported by the National Research Foundation of Korea (NRF) Funded by the Korea Government (MEST)
文摘The stability and reliability of a tilting index table should be considered at the design stage. A design method for the lightweight and improvement of the stability of the structure in a tilting index table was proposed using a commercial analysis program, ANSYS Workbench 12, by analyzing the static-thermal characteristics of the developed high-accuracy tilting index table at its design stage. The results of the performed structural analysis show that the maximum stress is generated at the stock tail part. An optimum design for the stock tail part was carried out to reduce the maximum stress and deformation. Also, the design variables were determined by considering the support of the stock tail part for the C-axis body. In the comparison of the results before and after the optimization, the maximum deformation and stress are improved by 2.8% and 8%, respectively.
文摘In this paper we propose procedures to enhance testability by adding transitions of undefined states to state transition tables. In these procedures, transitions about undefined states, which are not described in state transition tables but exist in a synthesized gate level circuit, are added to a state transition table. Experimental results for MCNC benchmarks are shown.
基金Project(60573127) supported by the National Natural Science Foundation of China project(05JJ40131) supported by theNatural Science Foundation of Hunan Province
文摘A new two-stage soft real-time scheduling algorithm based on priority table was proposed for task dispatch and selection in cluster systems with inaccurate parameters. The inaccurate characteristics of the system were modeled through probability analysis. By taking into account the multiple important system parameters, including task deadline, priority, session integrity and memory access locality, the algorithm is expected to achieve high quality of service. Lots of simulation results collected under different load conditions demonstrate that the algorithm can not only effectively overcome the inaccuracy of the system state, but also optimize the task rejected ratio, value realized ratio, differentiated service guaranteed ratio, and session integrity ensured ratio with the average improvement of 3.5%, 5.8%, 7.6% and 5. 5%, respectively. Compared with many existing schemes that cannen deal with the inaccurate parameters of the system, the proposed scheme can achieve the best system performance by carefully adjusting scheduling probability. The algorithm is expected to be promising in systems with soft real-time scheduling requirement such as E-commerce applications.
基金the National Natural Science Foundation of China under Grant Nos.60673167 90412011 (国家自然科学基金)the National Basic Research Program of China under Grant No.2005CB321801 (国家重点基础研究发展计划(973))
文摘基于网络资源的"成长性"、"自治性"和"多样性",近年来,人们提出以通用DHT(distributed Hash table)信息服务的形式实现网络资源信息的发布和查询.然而,现有的资源信息服务在通用性、易用性和自适应性等方面仍存在不足.针对虚拟计算环境iVCE(Internet-based virtual computingen vironment)的资源聚合需求,提出构建可扩展的分布式资源信息服务SDIRIS(scalable distributed resource information service).首先,提出采用自适应DHT(adaptive FissionE,简称A-FissionE)底层架构,以对上层应用透明的方式适应不同的系统规模和稳定性;其次,基于自适应DHT提出高效的多属性区间搜索算法(multiple-attribute range FissionE,简称MR-FissionE).理论分析和模拟结果表明,SDIRIS能够高效地实现资源信息的发布与查询功能.
