A widely-wavelength-tunable Brillouin fiber laser(BFL)with improved optical signal-to-noise ratio(OSNR)based on parity-time(PT)symmetric and saturable absorption(SA)effect is present.This novel BFL realizes PT symmetr...A widely-wavelength-tunable Brillouin fiber laser(BFL)with improved optical signal-to-noise ratio(OSNR)based on parity-time(PT)symmetric and saturable absorption(SA)effect is present.This novel BFL realizes PT symmetry and SA effect through polarization-maintaining erbium-doped fiber(PM-EDF)Sagnac loop,which is composed of a PM-EDF,a coupler and two polarization controllers(PCs).By using the inherent birefringence characteristic of PM-EDF,two feedback loops in orthogonal polarization state are formed when the Strokes signal in injected.One of these loops provides gain in the clockwise direction with in the Sagnac loop,while the other loop generates loss in the counterclockwise direction.By adjusting the PCs to control the polarization state of the PM-EDF,a single-longitudinal-mode(SLM)BFL can be achieved,as the PT symmetry is broken when the SA participating stimulated Brillouin scattering(SBS)gain and loss are well-matched and the gain surpasses the coupling coefficient.Compared to previous BFLs,the proposed BFL has a more streamlined structure and a wider wavelength tunable range,at the same time,it is not being limited by the bandwidth of the erbium-doped fiber amplifier while still maintaining narrow linewidth SLM output.Additionally,thanks to SA effect of the PM-EDF,the PT symmetric SBS gain contract is enhanced,resulting in a higher optical signal-to-noise(OSNR).The experimental results show that the laser has a wide tunable range of 1526.088 nm to 1565.498 nm,an improved OSNR of 77 dB,and a fine linewidth as small as 140.5 Hz.展开更多
Large calculation error can be formed by directly employing the conventional Yee’s grid to curve surfaces.In order to alleviate such condition,unconditionally stable CrankNicolson Douglas-Gunn(CNDG)algorithm with is ...Large calculation error can be formed by directly employing the conventional Yee’s grid to curve surfaces.In order to alleviate such condition,unconditionally stable CrankNicolson Douglas-Gunn(CNDG)algorithm with is proposed for rotationally symmetric multi-scale problems in anisotropic magnetized plasma.Within the CNDG algorithm,an alternative scheme for the simulation of anisotropic plasma is proposed in body-of-revolution domains.Convolutional perfectly matched layer(CPML)formulation is proposed to efficiently solve the open region problems.Numerical example is carried out for the illustration of effectiveness including the efficiency,resources,and absorption.Through the results,it can be concluded that the proposed scheme shows considerable performance during the simulation.展开更多
The micro-Doppler effect of moving targets may suffer from aliasing and Doppler migration due to the translational motion, which affects the application in real-time target identification. A new compensating method fo...The micro-Doppler effect of moving targets may suffer from aliasing and Doppler migration due to the translational motion, which affects the application in real-time target identification. A new compensating method for the rotationally symmetric target is proposed and demonstrated. By utilizing the micro-Doppler symmetry cancellation effect, the method can accurately compensate the translation effect, meanwhile, it behaves well in noise restraint. Computer simulations verify the high accuracy and efficiency of this method.展开更多
A symmetrically alternative rotating flow pattern was designed for flocculation process in order to produce large and dense flocs. The special effects of a symmetrically alternative rotating flow on the diameter and d...A symmetrically alternative rotating flow pattern was designed for flocculation process in order to produce large and dense flocs. The special effects of a symmetrically alternative rotating flow on the diameter and density of flocs were investigated. The results show that under the new fluid conditions, the primary particles on the outer part of the formed flocs may be cut down and the flocs contract at the end of the original rotating direction; then fluid changes its rotating direction, an opposite shearing is imposed to the flocs and makes some primary particles slide along the floc surface, leading to a denser floc; meanwhile, the broken and unflocculated particles on the trajectory may have opportunities to penetrate into or cohere to the flocs. Compared with the conventional rotating flow, the new-designed flow pattern can not only keep the floc size (even enlarge the floc diameter if a suitable flow is chosen) but also increase the floc density effectively.展开更多
In order to meet the demands of new-generation electric vehicles that require high power output(over 15 kW/kg),it is crucial to increase the energy density of car-bon-based supercapacitors to a level comparable to tha...In order to meet the demands of new-generation electric vehicles that require high power output(over 15 kW/kg),it is crucial to increase the energy density of car-bon-based supercapacitors to a level comparable to that of batteries,while maintaining a high power density.We re-port a porous carbon material produced by immersing pop-lar wood(PW)sawdust in a solution of KOH and graphene oxide(GO),followed by carbonization.The resulting mater-ial has exceptional properties as an electrode for high-en-ergy supercapacitors.Compared to the material prepared by the direct carbonization of PW,its electrical conductivity was in-creased from 0.36 to 26.3 S/cm.Because of this and a high microporosity of over 80%,which provides fast electron channels and a large ion storage surface,when used as the electrodes for a symmetric supercapacitor,it gave a high energy density of 27.9 Wh/kg@0.95 kW/kg in an aqueous electrolyte of 1.0 mol/L Na_(2)SO_(4).The device also had battery-level energy storage with maximum energy densities of 73.9 Wh/kg@2.0 kW/kg and 67.6 Wh/kg@40 kW/kg,an ultrahigh power density,in an organic electrolyte of 1.0 mol/L TEABF4/AN.These values are comparable to those of 30−45 Wh/kg for Pb-acid batteries and 30−55 Wh/kg for aqueous lithium batteries.This work indicates a way to prepare carbon materials that can be used in supercapacit-ors with ultrahigh energy and power densities.展开更多
Heat-resistant energetic materials refer to a type of energetic materials that possess a high melting point,high stability and operational safety. By studying the structures of these energetic materials has showed tha...Heat-resistant energetic materials refer to a type of energetic materials that possess a high melting point,high stability and operational safety. By studying the structures of these energetic materials has showed that the thermal stability can be enhanced by introducing amino groups to form intra/inter-molecular hydrogen bonds, constructing conjugate systems and designing symmetrical structures. This article aims to review the physical and chemical properties of ultra-high temperature heat-resistant energetic compounds and provide valuable theoretical insights for the preparation of ultra-high temperature heatresistant energetic materials. We also analyze the selected 20 heat-resistant energetic materials with decomposition temperatures higher than 350℃, serving as templates for the synthesis of various highperformance heat-resistant energetic materials.展开更多
The intelligent press forming of sheet metal is a completely new and comprehensive technology that combines control-science, computer science, material science and metal forming theory. Although the technology origina...The intelligent press forming of sheet metal is a completely new and comprehensive technology that combines control-science, computer science, material science and metal forming theory. Although the technology originated in 1980s from America, it was focused on the spring-back of V-shaped bending. Not until 1990s was some pioneering research conducted on the intellectualized control of cup-deep drawing. The research field is expanded to the axis-symmetric part and non-axis symmetric part. After a series of theoretical and experimental research, an intellectualized control system on the deep drawing processing of sheet metal is developed. The common general feature of sheet metal on the process of deep drawing is analyzed and a completely mechanical model is concluded and the deep drawing intellectualized control of sheet metal is finally realized.展开更多
An advanced configuration for multilevel voltage source converters is proposed. The proposed converter is able to apply asymmetrical DC sources. The configuration of the proposed inverter is well designed in order to ...An advanced configuration for multilevel voltage source converters is proposed. The proposed converter is able to apply asymmetrical DC sources. The configuration of the proposed inverter is well designed in order to provide the maximum number of voltage levels in output terminals using lower number of circuit devices. The authority of the proposed inverter versus the conventional H-bridge cascaded inverter and the most recently introduced ones, is verified with a provided comparison study. The proposed inverter is able to generate the desired voltage levels using a lower number of circuit devices including power semi-conductor switches, IGBTs, diodes, related gate driver circuits of switches and DC voltage sources. As a result, the total cost and installation area are considerably reduced and the control scheme gets simpler. To confirm the feasibility of the proposed multilevel structure, both the simulation and experimental results are provided and compared which shows good agreements.展开更多
A numerical optimization approach based on the finite element(FE) simulation was used to design the optimum irregular gourd-shaped pattern parameters for generating the highest hydrodynamic pressure. Then the optimum ...A numerical optimization approach based on the finite element(FE) simulation was used to design the optimum irregular gourd-shaped pattern parameters for generating the highest hydrodynamic pressure. Then the optimum parameters of the gourd-shaped surface texture were determined and the textures were processed on the stainless steel surface by the laser technology. The tribological performance of gourd-shaped surface texture was analyzed using the type of UMT2 tester, and compared with that of the regular circle surface texture and none-texture surface by considering the effect of sliding speeds and applied loads on the tribological performance. The results show that the compound factor n, the diameter ratio Dr and the texture depth Hd are more significant parameters and the optimum values are 0.618, 2.0 and 4 μm, respectively. In addition, irregular gourd-shaped surface texture with optimum parameters is the most effective in the friction reduction among the patterns investigated under different speeds and applied loads in this work. Moreover, better coordination and combination effect can be obtained by gourd-shaped surface texture. The main reason responsible for the results is the irregular symmetric nature of the gourd-shaped texture along the direction of lubricants flowing which can generate the higher fluid dynamic pressure.展开更多
Multiplicative multifractal process could well modal video traffic. The multiplier distributions in the multiplicatire multifractal model for video traffic are investigated and it is found that Gaussian is not suitabl...Multiplicative multifractal process could well modal video traffic. The multiplier distributions in the multiplicatire multifractal model for video traffic are investigated and it is found that Gaussian is not suitable for describing the multipliers on the small time scales. A new statistical distribution-symmetric Pareto distribution is introduced. It is applied instead of Gaussian for the multipliers on those scales. Based on that, the algorithm is updated so that symmetric pareto distribution and Gaussian distribution are used to model video traffic but on different time scales. The simulation results demonstrate that the algorithm could model video traffic more accurately.展开更多
Nano magnetic composite is a kind of heterogeneous material. Scientists found the symmetrical and dual symmetrical phenomena in its structure previously and we find the generalized dual symmetry mechanical performance...Nano magnetic composite is a kind of heterogeneous material. Scientists found the symmetrical and dual symmetrical phenomena in its structure previously and we find the generalized dual symmetry mechanical performance in Nano Magnetic Composite and further establish the theory. The applicable nano magnetic composite structure is analyzed thoroughly and systematically. Such phenomena as serration and step dispersing distribution of bending stress and mirror reflection of interlaminar stress are thus found. Therefore, starting from the physical features of materials, Nano Magnetic Composite are analyzed on the basis of the understanding and application of the generalized dual symmetry mechanical performance. In addition, the design parameter is optimized to attain the goal of maximizing the use of materials, which is quite meaningful.展开更多
In this paper we investigate the complexity of several problems concerning 2CNF formulas. At first, we show that the minimal unsatisfiability problem for 2CNF formulas can be solved in linear time. Then we prove that ...In this paper we investigate the complexity of several problems concerning 2CNF formulas. At first, we show that the minimal unsatisfiability problem for 2CNF formulas can be solved in linear time. Then we prove that the problem determining if a 2CNF formula can be transformed to a minimal unsatisfiable formula is also solvable in linear time. Thirdly, we show the polynomial solvability of the satisfiability problem for symmetric monotone formulas in which all clauses has length 2 or ? n - k ( n is the ...展开更多
A globally optimal solution to vector quantization (VQ) index assignment on noisy channel, the evolutionary algorithm based index assignment algorithm (EAIAA), is presented. The algorithm yields a significant reductio...A globally optimal solution to vector quantization (VQ) index assignment on noisy channel, the evolutionary algorithm based index assignment algorithm (EAIAA), is presented. The algorithm yields a significant reduction in average distortion due to channel errors, over conventional arbitrary index assignment, as confirmed by experimental results over the memoryless binary symmetric channel (BSC) for any bit error.展开更多
文摘A widely-wavelength-tunable Brillouin fiber laser(BFL)with improved optical signal-to-noise ratio(OSNR)based on parity-time(PT)symmetric and saturable absorption(SA)effect is present.This novel BFL realizes PT symmetry and SA effect through polarization-maintaining erbium-doped fiber(PM-EDF)Sagnac loop,which is composed of a PM-EDF,a coupler and two polarization controllers(PCs).By using the inherent birefringence characteristic of PM-EDF,two feedback loops in orthogonal polarization state are formed when the Strokes signal in injected.One of these loops provides gain in the clockwise direction with in the Sagnac loop,while the other loop generates loss in the counterclockwise direction.By adjusting the PCs to control the polarization state of the PM-EDF,a single-longitudinal-mode(SLM)BFL can be achieved,as the PT symmetry is broken when the SA participating stimulated Brillouin scattering(SBS)gain and loss are well-matched and the gain surpasses the coupling coefficient.Compared to previous BFLs,the proposed BFL has a more streamlined structure and a wider wavelength tunable range,at the same time,it is not being limited by the bandwidth of the erbium-doped fiber amplifier while still maintaining narrow linewidth SLM output.Additionally,thanks to SA effect of the PM-EDF,the PT symmetric SBS gain contract is enhanced,resulting in a higher optical signal-to-noise(OSNR).The experimental results show that the laser has a wide tunable range of 1526.088 nm to 1565.498 nm,an improved OSNR of 77 dB,and a fine linewidth as small as 140.5 Hz.
文摘Large calculation error can be formed by directly employing the conventional Yee’s grid to curve surfaces.In order to alleviate such condition,unconditionally stable CrankNicolson Douglas-Gunn(CNDG)algorithm with is proposed for rotationally symmetric multi-scale problems in anisotropic magnetized plasma.Within the CNDG algorithm,an alternative scheme for the simulation of anisotropic plasma is proposed in body-of-revolution domains.Convolutional perfectly matched layer(CPML)formulation is proposed to efficiently solve the open region problems.Numerical example is carried out for the illustration of effectiveness including the efficiency,resources,and absorption.Through the results,it can be concluded that the proposed scheme shows considerable performance during the simulation.
文摘The micro-Doppler effect of moving targets may suffer from aliasing and Doppler migration due to the translational motion, which affects the application in real-time target identification. A new compensating method for the rotationally symmetric target is proposed and demonstrated. By utilizing the micro-Doppler symmetry cancellation effect, the method can accurately compensate the translation effect, meanwhile, it behaves well in noise restraint. Computer simulations verify the high accuracy and efficiency of this method.
文摘A symmetrically alternative rotating flow pattern was designed for flocculation process in order to produce large and dense flocs. The special effects of a symmetrically alternative rotating flow on the diameter and density of flocs were investigated. The results show that under the new fluid conditions, the primary particles on the outer part of the formed flocs may be cut down and the flocs contract at the end of the original rotating direction; then fluid changes its rotating direction, an opposite shearing is imposed to the flocs and makes some primary particles slide along the floc surface, leading to a denser floc; meanwhile, the broken and unflocculated particles on the trajectory may have opportunities to penetrate into or cohere to the flocs. Compared with the conventional rotating flow, the new-designed flow pattern can not only keep the floc size (even enlarge the floc diameter if a suitable flow is chosen) but also increase the floc density effectively.
文摘In order to meet the demands of new-generation electric vehicles that require high power output(over 15 kW/kg),it is crucial to increase the energy density of car-bon-based supercapacitors to a level comparable to that of batteries,while maintaining a high power density.We re-port a porous carbon material produced by immersing pop-lar wood(PW)sawdust in a solution of KOH and graphene oxide(GO),followed by carbonization.The resulting mater-ial has exceptional properties as an electrode for high-en-ergy supercapacitors.Compared to the material prepared by the direct carbonization of PW,its electrical conductivity was in-creased from 0.36 to 26.3 S/cm.Because of this and a high microporosity of over 80%,which provides fast electron channels and a large ion storage surface,when used as the electrodes for a symmetric supercapacitor,it gave a high energy density of 27.9 Wh/kg@0.95 kW/kg in an aqueous electrolyte of 1.0 mol/L Na_(2)SO_(4).The device also had battery-level energy storage with maximum energy densities of 73.9 Wh/kg@2.0 kW/kg and 67.6 Wh/kg@40 kW/kg,an ultrahigh power density,in an organic electrolyte of 1.0 mol/L TEABF4/AN.These values are comparable to those of 30−45 Wh/kg for Pb-acid batteries and 30−55 Wh/kg for aqueous lithium batteries.This work indicates a way to prepare carbon materials that can be used in supercapacit-ors with ultrahigh energy and power densities.
基金supported by the National Natural Science Foundation of China(Grant Nos.21975127,22105102,and 22135003)Young Elite Scientist Sponsorship Program by CAST(Grant No.YESS20210074)the Fundamental Research Funds for the Central Universities(Grant No.30921011204)。
文摘Heat-resistant energetic materials refer to a type of energetic materials that possess a high melting point,high stability and operational safety. By studying the structures of these energetic materials has showed that the thermal stability can be enhanced by introducing amino groups to form intra/inter-molecular hydrogen bonds, constructing conjugate systems and designing symmetrical structures. This article aims to review the physical and chemical properties of ultra-high temperature heat-resistant energetic compounds and provide valuable theoretical insights for the preparation of ultra-high temperature heatresistant energetic materials. We also analyze the selected 20 heat-resistant energetic materials with decomposition temperatures higher than 350℃, serving as templates for the synthesis of various highperformance heat-resistant energetic materials.
基金Projects(59875074 50375136) supported by the National Natural Science Foundation of China
文摘The intelligent press forming of sheet metal is a completely new and comprehensive technology that combines control-science, computer science, material science and metal forming theory. Although the technology originated in 1980s from America, it was focused on the spring-back of V-shaped bending. Not until 1990s was some pioneering research conducted on the intellectualized control of cup-deep drawing. The research field is expanded to the axis-symmetric part and non-axis symmetric part. After a series of theoretical and experimental research, an intellectualized control system on the deep drawing processing of sheet metal is developed. The common general feature of sheet metal on the process of deep drawing is analyzed and a completely mechanical model is concluded and the deep drawing intellectualized control of sheet metal is finally realized.
文摘An advanced configuration for multilevel voltage source converters is proposed. The proposed converter is able to apply asymmetrical DC sources. The configuration of the proposed inverter is well designed in order to provide the maximum number of voltage levels in output terminals using lower number of circuit devices. The authority of the proposed inverter versus the conventional H-bridge cascaded inverter and the most recently introduced ones, is verified with a provided comparison study. The proposed inverter is able to generate the desired voltage levels using a lower number of circuit devices including power semi-conductor switches, IGBTs, diodes, related gate driver circuits of switches and DC voltage sources. As a result, the total cost and installation area are considerably reduced and the control scheme gets simpler. To confirm the feasibility of the proposed multilevel structure, both the simulation and experimental results are provided and compared which shows good agreements.
基金Project(51305023) supported by the National Natural Science Foundation of ChinaProject(FRF-GF-17-B20) supported by the Fundamental Research Funds for the Central Universities of China
文摘A numerical optimization approach based on the finite element(FE) simulation was used to design the optimum irregular gourd-shaped pattern parameters for generating the highest hydrodynamic pressure. Then the optimum parameters of the gourd-shaped surface texture were determined and the textures were processed on the stainless steel surface by the laser technology. The tribological performance of gourd-shaped surface texture was analyzed using the type of UMT2 tester, and compared with that of the regular circle surface texture and none-texture surface by considering the effect of sliding speeds and applied loads on the tribological performance. The results show that the compound factor n, the diameter ratio Dr and the texture depth Hd are more significant parameters and the optimum values are 0.618, 2.0 and 4 μm, respectively. In addition, irregular gourd-shaped surface texture with optimum parameters is the most effective in the friction reduction among the patterns investigated under different speeds and applied loads in this work. Moreover, better coordination and combination effect can be obtained by gourd-shaped surface texture. The main reason responsible for the results is the irregular symmetric nature of the gourd-shaped texture along the direction of lubricants flowing which can generate the higher fluid dynamic pressure.
文摘Multiplicative multifractal process could well modal video traffic. The multiplier distributions in the multiplicatire multifractal model for video traffic are investigated and it is found that Gaussian is not suitable for describing the multipliers on the small time scales. A new statistical distribution-symmetric Pareto distribution is introduced. It is applied instead of Gaussian for the multipliers on those scales. Based on that, the algorithm is updated so that symmetric pareto distribution and Gaussian distribution are used to model video traffic but on different time scales. The simulation results demonstrate that the algorithm could model video traffic more accurately.
基金Supported by the National Natural Science Foundation of China (projects 50175057)
文摘Nano magnetic composite is a kind of heterogeneous material. Scientists found the symmetrical and dual symmetrical phenomena in its structure previously and we find the generalized dual symmetry mechanical performance in Nano Magnetic Composite and further establish the theory. The applicable nano magnetic composite structure is analyzed thoroughly and systematically. Such phenomena as serration and step dispersing distribution of bending stress and mirror reflection of interlaminar stress are thus found. Therefore, starting from the physical features of materials, Nano Magnetic Composite are analyzed on the basis of the understanding and application of the generalized dual symmetry mechanical performance. In addition, the design parameter is optimized to attain the goal of maximizing the use of materials, which is quite meaningful.
文摘In this paper we investigate the complexity of several problems concerning 2CNF formulas. At first, we show that the minimal unsatisfiability problem for 2CNF formulas can be solved in linear time. Then we prove that the problem determining if a 2CNF formula can be transformed to a minimal unsatisfiable formula is also solvable in linear time. Thirdly, we show the polynomial solvability of the satisfiability problem for symmetric monotone formulas in which all clauses has length 2 or ? n - k ( n is the ...
文摘A globally optimal solution to vector quantization (VQ) index assignment on noisy channel, the evolutionary algorithm based index assignment algorithm (EAIAA), is presented. The algorithm yields a significant reduction in average distortion due to channel errors, over conventional arbitrary index assignment, as confirmed by experimental results over the memoryless binary symmetric channel (BSC) for any bit error.
