Different bilayer structures of HfO_(x)/Ti(TiO_(x)) are designed for hafnium-based memory to investigate the switching characteristics. The chemical states in the films and near the interface are characterized by x-ra...Different bilayer structures of HfO_(x)/Ti(TiO_(x)) are designed for hafnium-based memory to investigate the switching characteristics. The chemical states in the films and near the interface are characterized by x-ray photoelectron spectroscopy,and the oxygen vacancies are analyzed. Highly improved on/off ratio(~104) and much uniform switching parameters are observed for bilayer structures compared to single layer HfO_(x) sample, which can be attributed to the modulation of oxygen vacancies at the interface and better control of the growth of filaments. Furthermore, the reliability of the prepared samples is investigated. The carrier conduction behaviors of HfO_(x)-based samples can be attributed to the trapping and de-trapping process of oxygen vacancies and a filamentary model is proposed. In addition, the rupture of filaments during the reset process for the bilayer structures occur at the weak points near the interface by the recovery of oxygen vacancies accompanied by the variation of barrier height. The re-formation of fixed filaments due to the residual filaments as lightning rods results in the better switching performance of the bilayer structure.展开更多
Memory access fast switching structures in cluster are studied,and three kinds of fast switching structures（ FS,LR2 SS,and LAPS） are proposed. A mixed simulation test bench is constructed and used for statistic of d...Memory access fast switching structures in cluster are studied,and three kinds of fast switching structures（ FS,LR2 SS,and LAPS） are proposed. A mixed simulation test bench is constructed and used for statistic of data access delay among these three structures in various cases. Finally these structures are realized on Xilinx FPGA development board and DCT,FFT,SAD,IME,FME,and de-blocking filtering algorithms are mapped onto the structures. Compared with available architectures,our proposed structures have lower data access delay and lower area.展开更多
In this paper, we present the design and optimization of a side-coupled accelerating structure with an energy switch. The beam parameters are optimized, and the electric field asymmetry in the first cell is analyzed. ...In this paper, we present the design and optimization of a side-coupled accelerating structure with an energy switch. The beam parameters are optimized, and the electric field asymmetry in the first cell is analyzed. The new structure we designed has an improvement of 10 times in the accelerating field symmetry. Thermo-mechanical analysis is performed based on the electromagnetic results. The highest temperature is 72.5 ℃ at the nose cone, and the maximal deformation is 73 μm at the outer edge of the coupling cavity.展开更多
Wavelength selective switch(WSS)is the crucial component in the reconfigurable optical add/drop multiplexer(ROADM),which plays a pivotal role in the next-generation all-optical networks.We present a compact architectu...Wavelength selective switch(WSS)is the crucial component in the reconfigurable optical add/drop multiplexer(ROADM),which plays a pivotal role in the next-generation all-optical networks.We present a compact architecture of twin 1×40 liquid crystal on silicon(LCoS)-based WSS,which can be regarded as a 4f system in the wavelength direction and a 2f system in the switching direction.It is designed with theoretical analysis and simulation investigation.Polarization multiplexing is employed for two sources of twin WSS by polarization con-version before the common optical path.The WSS system attains a coupling efficacy exceeding 96%for 90%of the ports through simulation optimization.The 3 dB bandwidth can be achieved by more than 44 GHz at a 50 GHz grid for all 120 channels at all deflection ports.This work establishes a solid foundation for developing high-performance WSS with larger port counts.展开更多
In this work, a dual-side parabolic structural(DSPS) multimode interference(MMI) thermo–optic(TO) waveguide switch is designed and fabricated by using novel low-loss fluorinated photopolymer materials. Comparing with...In this work, a dual-side parabolic structural(DSPS) multimode interference(MMI) thermo–optic(TO) waveguide switch is designed and fabricated by using novel low-loss fluorinated photopolymer materials. Comparing with the traditional dual-side linear structural(DSLS) MMI device, the effective length of the MMI coupling region proposed can be effectively reduced by 40%. The thermal stability of the waveguide material is analyzed, and the optical characteristics of the switching chip are simulated. The actual performances of the entire MMI switch are measured with an insertion loss of7 dB, switching power of 15 m W and an extinction ratio of 28 dB. In contrast to the traditional MMI optical switch, the new type of parabolic structural MMI TO waveguide switch exhibits lower power consumption and larger extinction ratio. The compact fluorinated polymer MMI TO switches are suitable well for realizing miniaturization, high-properties, and lower cost of photonic integrated circuits.展开更多
基金financially supported by the National Natural Science Foundation of China (Grant No.51802025)the Natural Science Basic Research Plan in Shaanxi Province of China (Grant No.2020JQ-384)。
文摘Different bilayer structures of HfO_(x)/Ti(TiO_(x)) are designed for hafnium-based memory to investigate the switching characteristics. The chemical states in the films and near the interface are characterized by x-ray photoelectron spectroscopy,and the oxygen vacancies are analyzed. Highly improved on/off ratio(~104) and much uniform switching parameters are observed for bilayer structures compared to single layer HfO_(x) sample, which can be attributed to the modulation of oxygen vacancies at the interface and better control of the growth of filaments. Furthermore, the reliability of the prepared samples is investigated. The carrier conduction behaviors of HfO_(x)-based samples can be attributed to the trapping and de-trapping process of oxygen vacancies and a filamentary model is proposed. In addition, the rupture of filaments during the reset process for the bilayer structures occur at the weak points near the interface by the recovery of oxygen vacancies accompanied by the variation of barrier height. The re-formation of fixed filaments due to the residual filaments as lightning rods results in the better switching performance of the bilayer structure.
基金Supported by the National Natural Science Foundation of China(61272120,61634004,61602377)the Shaanxi Provincial Co-ordination Innovation Project of Science and Technology(2016KTZDGY02-04-02)Scientific Research Program Funded by Shannxi Provincial Education Department(17JK0689)
文摘Memory access fast switching structures in cluster are studied,and three kinds of fast switching structures（ FS,LR2 SS,and LAPS） are proposed. A mixed simulation test bench is constructed and used for statistic of data access delay among these three structures in various cases. Finally these structures are realized on Xilinx FPGA development board and DCT,FFT,SAD,IME,FME,and de-blocking filtering algorithms are mapped onto the structures. Compared with available architectures,our proposed structures have lower data access delay and lower area.
文摘In this paper, we present the design and optimization of a side-coupled accelerating structure with an energy switch. The beam parameters are optimized, and the electric field asymmetry in the first cell is analyzed. The new structure we designed has an improvement of 10 times in the accelerating field symmetry. Thermo-mechanical analysis is performed based on the electromagnetic results. The highest temperature is 72.5 ℃ at the nose cone, and the maximal deformation is 73 μm at the outer edge of the coupling cavity.
基金This work was supported by ZTE Industry⁃University⁃Institute Coopera⁃tion Funds under Grant No.IA20230614004.
文摘Wavelength selective switch(WSS)is the crucial component in the reconfigurable optical add/drop multiplexer(ROADM),which plays a pivotal role in the next-generation all-optical networks.We present a compact architecture of twin 1×40 liquid crystal on silicon(LCoS)-based WSS,which can be regarded as a 4f system in the wavelength direction and a 2f system in the switching direction.It is designed with theoretical analysis and simulation investigation.Polarization multiplexing is employed for two sources of twin WSS by polarization con-version before the common optical path.The WSS system attains a coupling efficacy exceeding 96%for 90%of the ports through simulation optimization.The 3 dB bandwidth can be achieved by more than 44 GHz at a 50 GHz grid for all 120 channels at all deflection ports.This work establishes a solid foundation for developing high-performance WSS with larger port counts.
基金Project supported by the National Key Research and Development Program of China(Grant No.2016YFB0402502)the National Natural Science Foundation of China(Grant Nos.61575076,61475061,61605057,and 61675087)the Jilin Provincial Industrial Innovation Special Fund Project,China(Grant No.2016C019)
文摘In this work, a dual-side parabolic structural(DSPS) multimode interference(MMI) thermo–optic(TO) waveguide switch is designed and fabricated by using novel low-loss fluorinated photopolymer materials. Comparing with the traditional dual-side linear structural(DSLS) MMI device, the effective length of the MMI coupling region proposed can be effectively reduced by 40%. The thermal stability of the waveguide material is analyzed, and the optical characteristics of the switching chip are simulated. The actual performances of the entire MMI switch are measured with an insertion loss of7 dB, switching power of 15 m W and an extinction ratio of 28 dB. In contrast to the traditional MMI optical switch, the new type of parabolic structural MMI TO waveguide switch exhibits lower power consumption and larger extinction ratio. The compact fluorinated polymer MMI TO switches are suitable well for realizing miniaturization, high-properties, and lower cost of photonic integrated circuits.
