The finite element analysis was carried out for a composite vertical axis wind turbine with lift-drag combined starting structures to ensure the structure safety of a vertical axis wind turbine(VAWT).The static and mo...The finite element analysis was carried out for a composite vertical axis wind turbine with lift-drag combined starting structures to ensure the structure safety of a vertical axis wind turbine(VAWT).The static and modal analysis of rotor of a composite vertical axis wind turbine was conducted by using ANSYS software.The relevant contour sketch of stress and deformation was obtained.The analysis was made for static structural mechanics,modal analysis of rotor and the total deformation and vibration profile to evaluate the influence on the working capability of the rotor.The analysis results show that the various structure parameters lie in the safety range of structural mechanics in the relative standards.The analysis showing the design safe to operate the rotor of a vertical axis wind turbine.The methods used in this study can be used as a good reference for the structural mechanics′analysis of VAWTs.展开更多
The ductile-to-brittle transition temperature(DBTT)of high strength steels can be optimized by tailoring microstructure and crystallographic orientation characteristics,where the start cooling temperature plays a key ...The ductile-to-brittle transition temperature(DBTT)of high strength steels can be optimized by tailoring microstructure and crystallographic orientation characteristics,where the start cooling temperature plays a key role.In this work,X70 steels with different start cooling temperatures were prepared through thermo-mechanical control process.The quasi-polygonal ferrite(QF),granular bainite(GB),bainitic ferrite(BF)and martensite-austenite constituents were formed at the start cooling temperatures of 780℃(C1),740℃(C2)and 700℃(C3).As start cooling temperature decreased,the amount of GB decreased,the microstructure of QF and BF increased.Microstructure characteristics of the three samples,such as high-angle grain boundaries(HAGBs),MA constituents and crystallographic orientation,also varied with the start cooling temperatures.C2 sample had the lowest DBTT value(−86℃)for its highest fraction of HAGBs,highest content of<110>oriented grains and lowest content of<001>oriented grains parallel to TD.The high density of{332}<113>and low density of rotated cube{001}<110>textures also contributed to the best impact toughness of C2 sample.In addition,a modified model was used in this paper to quantitatively predict the approximate DBTT value of steels.展开更多
The author shows different opinion on the focal topic of “Green GDP” and considers that it is incorrect and unrealistic to worship EDP so much.Currently we should start from some foundational work of environmental a...The author shows different opinion on the focal topic of “Green GDP” and considers that it is incorrect and unrealistic to worship EDP so much.Currently we should start from some foundational work of environmental accounts.展开更多
针对我国水库防洪调度系统研究与应用的现状及存在问题,提出了基于D/S模式的水库防洪调度系统的解决方案,采用Java Web Start软件实现了D/S模式的整体架构、利用图论实现了水库群的集成,应用Hibernate框架解决了业务逻辑与数据库间强耦...针对我国水库防洪调度系统研究与应用的现状及存在问题,提出了基于D/S模式的水库防洪调度系统的解决方案,采用Java Web Start软件实现了D/S模式的整体架构、利用图论实现了水库群的集成,应用Hibernate框架解决了业务逻辑与数据库间强耦合关系,并利用设计模式增强了系统的可维护性和可复用性。展开更多
As a kind of mathematical model, grey systems predi ct ion model has been widely applied to economy, management and engineering technol ogy. In 1982, Professor Deng Ju-long presented GM prediction model. Then some o t...As a kind of mathematical model, grey systems predi ct ion model has been widely applied to economy, management and engineering technol ogy. In 1982, Professor Deng Ju-long presented GM prediction model. Then some o ther scholars made improvements on GM model. Of course, much still should be don e to develop it. What the scholars have done is to take the first component of X (1) as the starting conditions of the grey differential model. It occ urs that the new information can not be used enough. This paper is addressed to choose the nth component of X (1) as the starting conditions to improv e the models. The main results of the paper is given in Theorem 2: The time response function of the grey differential equation x (0)(k)+az (1)(k)=b is given by x (1)(k)=x (1)(n)-ba e -a(k-n )+ba. and Theorem4: The time response of the grey Verhulst model is given by (1)(k) =ax (1)(n)bx (1)(n)+(a-bx (1)(n))ae a(k-n). As the new information is fully used, the accuracy of prediction is improved gre atly. Therefore, the new model with a certain theoretical and practical value.展开更多
A flux linkage compensation field oriented control (FOC) method was proposed to suppress the speed and torque ripples of a brushless wound-field synchronous motor in its starting process. The starting process was anal...A flux linkage compensation field oriented control (FOC) method was proposed to suppress the speed and torque ripples of a brushless wound-field synchronous motor in its starting process. The starting process was analyzed and the model of wound-field synchronous electric machine was established. The change of field current of the electric machine was described mathematically for simplified exciter and rotate rectifier. Based on the traditional field control, the flux linkage compensation was introduced in d-axis current to counteract the flux ripple. Some simulation and preliminary experiments were implemented. The results show that the proposed method is feasible and effective.展开更多
本文综合 ActiveX、Java Applet、Java Web Start以及一些知名公司的软件发布方法,提出了新的城域网考试系统发布策略,使城域网考试系统的发布大大简化,采用三层发布技术和替代容器,使网络带宽占用减少90％以上,并且客户端可以脱离浏览...本文综合 ActiveX、Java Applet、Java Web Start以及一些知名公司的软件发布方法,提出了新的城域网考试系统发布策略,使城域网考试系统的发布大大简化,采用三层发布技术和替代容器,使网络带宽占用减少90％以上,并且客户端可以脱离浏览器运行。对于开发高效率B/S体系的应用程序的发布来说,很有参考价值和借鉴意义。展开更多
The instantaneous variations of the hydraulic characteristics take place in centrifugal pumps during their start-up,shutdown and other variable speed operations.In this paper,the variable speed method was proposed to ...The instantaneous variations of the hydraulic characteristics take place in centrifugal pumps during their start-up,shutdown and other variable speed operations.In this paper,the variable speed method was proposed to simulate the transient internal flow field and the external performance of the pump during starting and stopping periods.The terms of accelerations due to variable speeds in the flow governing equations were analyzed in a multiple reference of frame(MRF).A transient CFD simulation was performed for a typical centrifugal pump by using ANSYS-CFX with the standard k-εturbulence model.The entire simulation process was composed of four stages:start-up,normal run,shutdown and post-shutdown.The function of rotating speed with regard to time was set by CEL language directly into the impeller domain in the pre-processor of the software to conduct variable speed simulation.The variations of the flow field in the centrifugal pump were obtained from the transient simulation.The changing laws of flow rate,head and other performance parameters over time were also analyzed and summarized.展开更多
Based on the results of triaxial compressive creep tests for five kinds of rock under the different stress loading,unloading and cycle-loading-unloading conditions,the creep deformation is not only a function of stres...Based on the results of triaxial compressive creep tests for five kinds of rock under the different stress loading,unloading and cycle-loading-unloading conditions,the creep deformation is not only a function of stress and time,but also it has the corresponding relations to the triaxial stress-strain curves of rock.The deformation properties of soften-strain,harden-strain and ideal plasticity presented by conventional triaxial compressive test curves under the different stress states were utilized,and the creep characteristics,the creep starting stress and the different entire creep process curves of rock were studied systematically according to creep experiment results,and the relations of the triaxial stress-strain curves to the creeping starting stress,the terminating curve,the different creep processes,and the different creep fracture properties were established.The relations presented in this paper were verified partially by the creep experiment results of five types of rock.展开更多
文摘The finite element analysis was carried out for a composite vertical axis wind turbine with lift-drag combined starting structures to ensure the structure safety of a vertical axis wind turbine(VAWT).The static and modal analysis of rotor of a composite vertical axis wind turbine was conducted by using ANSYS software.The relevant contour sketch of stress and deformation was obtained.The analysis was made for static structural mechanics,modal analysis of rotor and the total deformation and vibration profile to evaluate the influence on the working capability of the rotor.The analysis results show that the various structure parameters lie in the safety range of structural mechanics in the relative standards.The analysis showing the design safe to operate the rotor of a vertical axis wind turbine.The methods used in this study can be used as a good reference for the structural mechanics′analysis of VAWTs.
基金Project(2018XK2301) supported by the Change-Zhu-Tan National Independent Innavation Demonstration Zone Special Program,China。
文摘The ductile-to-brittle transition temperature(DBTT)of high strength steels can be optimized by tailoring microstructure and crystallographic orientation characteristics,where the start cooling temperature plays a key role.In this work,X70 steels with different start cooling temperatures were prepared through thermo-mechanical control process.The quasi-polygonal ferrite(QF),granular bainite(GB),bainitic ferrite(BF)and martensite-austenite constituents were formed at the start cooling temperatures of 780℃(C1),740℃(C2)and 700℃(C3).As start cooling temperature decreased,the amount of GB decreased,the microstructure of QF and BF increased.Microstructure characteristics of the three samples,such as high-angle grain boundaries(HAGBs),MA constituents and crystallographic orientation,also varied with the start cooling temperatures.C2 sample had the lowest DBTT value(−86℃)for its highest fraction of HAGBs,highest content of<110>oriented grains and lowest content of<001>oriented grains parallel to TD.The high density of{332}<113>and low density of rotated cube{001}<110>textures also contributed to the best impact toughness of C2 sample.In addition,a modified model was used in this paper to quantitatively predict the approximate DBTT value of steels.
文摘The author shows different opinion on the focal topic of “Green GDP” and considers that it is incorrect and unrealistic to worship EDP so much.Currently we should start from some foundational work of environmental accounts.
文摘针对我国水库防洪调度系统研究与应用的现状及存在问题,提出了基于D/S模式的水库防洪调度系统的解决方案,采用Java Web Start软件实现了D/S模式的整体架构、利用图论实现了水库群的集成,应用Hibernate框架解决了业务逻辑与数据库间强耦合关系,并利用设计模式增强了系统的可维护性和可复用性。
文摘As a kind of mathematical model, grey systems predi ct ion model has been widely applied to economy, management and engineering technol ogy. In 1982, Professor Deng Ju-long presented GM prediction model. Then some o ther scholars made improvements on GM model. Of course, much still should be don e to develop it. What the scholars have done is to take the first component of X (1) as the starting conditions of the grey differential model. It occ urs that the new information can not be used enough. This paper is addressed to choose the nth component of X (1) as the starting conditions to improv e the models. The main results of the paper is given in Theorem 2: The time response function of the grey differential equation x (0)(k)+az (1)(k)=b is given by x (1)(k)=x (1)(n)-ba e -a(k-n )+ba. and Theorem4: The time response of the grey Verhulst model is given by (1)(k) =ax (1)(n)bx (1)(n)+(a-bx (1)(n))ae a(k-n). As the new information is fully used, the accuracy of prediction is improved gre atly. Therefore, the new model with a certain theoretical and practical value.
基金Sponsored by the NSFC General Project (51177135)the Key Project of Natural Science Foundation of Shaanxi Province (2011GZ013)
文摘A flux linkage compensation field oriented control (FOC) method was proposed to suppress the speed and torque ripples of a brushless wound-field synchronous motor in its starting process. The starting process was analyzed and the model of wound-field synchronous electric machine was established. The change of field current of the electric machine was described mathematically for simplified exciter and rotate rectifier. Based on the traditional field control, the flux linkage compensation was introduced in d-axis current to counteract the flux ripple. Some simulation and preliminary experiments were implemented. The results show that the proposed method is feasible and effective.
文摘本文综合 ActiveX、Java Applet、Java Web Start以及一些知名公司的软件发布方法,提出了新的城域网考试系统发布策略,使城域网考试系统的发布大大简化,采用三层发布技术和替代容器,使网络带宽占用减少90％以上,并且客户端可以脱离浏览器运行。对于开发高效率B/S体系的应用程序的发布来说,很有参考价值和借鉴意义。
文摘The instantaneous variations of the hydraulic characteristics take place in centrifugal pumps during their start-up,shutdown and other variable speed operations.In this paper,the variable speed method was proposed to simulate the transient internal flow field and the external performance of the pump during starting and stopping periods.The terms of accelerations due to variable speeds in the flow governing equations were analyzed in a multiple reference of frame(MRF).A transient CFD simulation was performed for a typical centrifugal pump by using ANSYS-CFX with the standard k-εturbulence model.The entire simulation process was composed of four stages:start-up,normal run,shutdown and post-shutdown.The function of rotating speed with regard to time was set by CEL language directly into the impeller domain in the pre-processor of the software to conduct variable speed simulation.The variations of the flow field in the centrifugal pump were obtained from the transient simulation.The changing laws of flow rate,head and other performance parameters over time were also analyzed and summarized.
基金Project(50774090) supported by the National Natural Science Foundation of China
文摘Based on the results of triaxial compressive creep tests for five kinds of rock under the different stress loading,unloading and cycle-loading-unloading conditions,the creep deformation is not only a function of stress and time,but also it has the corresponding relations to the triaxial stress-strain curves of rock.The deformation properties of soften-strain,harden-strain and ideal plasticity presented by conventional triaxial compressive test curves under the different stress states were utilized,and the creep characteristics,the creep starting stress and the different entire creep process curves of rock were studied systematically according to creep experiment results,and the relations of the triaxial stress-strain curves to the creeping starting stress,the terminating curve,the different creep processes,and the different creep fracture properties were established.The relations presented in this paper were verified partially by the creep experiment results of five types of rock.
