The mechanical properties of residual coal pillars under the influence of upward mining disturbances significantly affect the safety of residual mining activities on working faces.This study conducted low-frequency di...The mechanical properties of residual coal pillars under the influence of upward mining disturbances significantly affect the safety of residual mining activities on working faces.This study conducted low-frequency disturbance dynamic uniaxial compression tests on coal specimens using a self-developed dynamic-static load coupling electro-hydraulic servo system,and studied the strength evolutions,surface deformations,acoustic emission(AE)characteristic parameters,and the failure modes of coal specimens with different static preloading levels were studied.The disturbance damage is positively correlated with the coal specimen static preload level.Specifically,the cumulative AE count rates of the initial accelerated damage stage for the coal specimens with static preloading level of 60%and 70%of the uniaxial compressive strength(UCS)were 2.66 and 3.19 times that of the 50%UCS specimens,respectively.Macroscopically,this behaviour manifested as a decrease in the compressive strength,and the mean strengths of the disturbance-damaged coal specimens with 60%and 70%of UCS static preloading decreased by 8.53%and 9.32%,respectively,compared to those of the specimens under pure static loading.The crack sources,such as the primary fissures,strongly control the dynamic response of the coal specimen.The difference between the dynamic responses of the coal specimens and that of dense rocks is significant.展开更多
A simultaneous experimental and numerical study on crack propagation in the pre-cracked beams specimens(concrete-like materials) is carried out using three-point bending flexural test. The crack propagation and coales...A simultaneous experimental and numerical study on crack propagation in the pre-cracked beams specimens(concrete-like materials) is carried out using three-point bending flexural test. The crack propagation and coalescence paths of internal cracks in side beam specimens are experimentally studied by inserting double internal cracks. The effects of crack positions on the fracturing path in the bridge areas of the double cracked beam specimens are also studied. It has been observed that the breaking of concrete-like cracked beams specimens occurs mainly by the propagation of wing cracks emanating from the tips of the pre-existing cracks in the numerical and experimental analyses, respectively. The same specimens are numerically simulated by an indirect boundary element method(IBEM) known as displacement discontinuity method(DDM) using higher displacement discontinuity. These numerical results are compared with the existing experimental results. This comparison illustrates the higher accuracy of the results obtained by the indirect boundary element method by using only a small number of elements compared with the discrete element method(PFC2D code).展开更多
The mechanism of cracks propagation and cracks coalescence due to compressive loading of the brittle substances containing pre-existing cracks （flaws） was modeled experimentally using specially made rock-like specim...The mechanism of cracks propagation and cracks coalescence due to compressive loading of the brittle substances containing pre-existing cracks （flaws） was modeled experimentally using specially made rock-like specimens from Portland Pozzolana Cement （PPC）. The breakage process of the specimens was studied by inserting single and double flaws with different inclination angles at the center and applying uniaxial compressive stress at both ends of the specimen. The first crack was oriented at 50＆#176; from the horizontal direction and kept constant throughout the analysis while the orientation of the second crack was changed. It is experimentally observed that the wing cracks are produced at the first stage of loading and start their propagation toward the direction of uniaxial compressive loading. The secondary cracks may also be produced in form of quasi-coplanar and/or oblique cracks in a stable manner. The secondary cracks may eventually continue their propagation in the direction of maximum principle stress. These experimental works were also simulated numerically by a modified higher order displacement discontinuity method and the cracks propagation and cracks coalescence were studied based on Mode I and Mode II stress intensity factors （SIFs）. It is concluded that the wing cracks initiation stresses for the specimens change from 11.3 to 14.1 MPain the case of numerical simulations and from 7.3 to 13.8 MPa in the case of experimental works. It is observed that cracks coalescence stresses change from 21.8 to 25.3 MPa and from 19.5 to 21.8 MPa in the numerical and experimental analyses, respectively. Comparing some of the numerical and experimental results with those recently cited in the literature validates the results obtained by the proposed study. Finally, a numerical simulation was accomplished to study the effect of confining pressure on the crack propagation process, showing that the SIFs increase and the crack initiation angles change in this case.展开更多
A new technique, involving tool making, clearing, staining, cutting and mounting specimens on slides, was described for studying Collembola taxonomy. It could resolve the problem of observing Collembola glass specimen...A new technique, involving tool making, clearing, staining, cutting and mounting specimens on slides, was described for studying Collembola taxonomy. It could resolve the problem of observing Collembola glass specimens under standard optical microscopy, because the phase-contrast microscope has not been available for all researchers. A type of micro cutting probe （about 1 μm in tip diameter） was designed, and it made the cutting method go from two-handed to one-handed, which was a huge step forward in the cutting method of Collembola. The micro cutting probe was custom designed for Collembola using two electric grinders, followed by ferric tannate staining with a stable blue color, mounting in specialized solutions and sealing with a neutral quick-drying gum. We also described a method to make glass capillary extractor and glass capillary brush to make sure a better condition of cleared specimens.展开更多
Crystal of barium boric oxide(BBO) crystallizes in trigollal system. Imperfections in two specimens of(001)plates (one being transparent and the other containing inclusions)in the crystals have been identified by X-ra...Crystal of barium boric oxide(BBO) crystallizes in trigollal system. Imperfections in two specimens of(001)plates (one being transparent and the other containing inclusions)in the crystals have been identified by X-ray topography.展开更多
In order to verify the validity of finite element numerical simulation method for asphalt mixture, which consists of aggregates, mastic （where mastic is a kind of fine mixture composed of asphalt binder mixed with fi...In order to verify the validity of finite element numerical simulation method for asphalt mixture, which consists of aggregates, mastic （where mastic is a kind of fine mixture composed of asphalt binder mixed with fines and fine aggregates） and air voids, based on three-dimensional （3D） heterogeneous specimen, X-ray computerized tomography （X-ray CT） was used to scan the asphalt specimens to obtain the real internal microstrnctures of asphalt mixture. CT images were reconstructed to build up 3D digital specimen, and the viscoelastic properties of mastic were described with Burgers model The uniaxial creep numerical simulations of three different levels of aggregate gradation were conducted. The simulation results agree well with the experimental results. The numerical simulation of asphalt mixture incorporated with real 3D microstructure based on finite element method is a promising application to conduct research of asphalt concrete. Additionally, this method can increase the mechanistic understanding of global viscoelastic properties of asphalt mixtures by linking the real 3D microstructure.展开更多
The asymmetric semi-circular bend(ASCB)specimen has been proposed to investigate the cracking behavior in different geo and construction materials and attracted the attention of researchers due to its advantages.Howev...The asymmetric semi-circular bend(ASCB)specimen has been proposed to investigate the cracking behavior in different geo and construction materials and attracted the attention of researchers due to its advantages.However,there are few studies on the fracture toughness determination of rock materials.In this work,a series of fracture tests were performed with the ASCB specimens made of granite.The onset of fracture,crack initiation angle and crack propagating trajectory was analyzed in detail combined with several mixed mode fracture criteria.The influence of the crack length on the mode Ⅰ/Ⅱ fracture toughness was studied.A comparison between the fracture toughness ratios predicted by varying criteria and experimental results was conducted.The relationship between experimentally determined crack initiation angles and curves of the generalized maximum tangential stress(GMTS)criterion was obtained.The fracture process of the specimen was recorded with the high-speed camera.The shortcomings of the ASCB specimens for the fracture toughness determination of rock materials were discussed.The results may provide a reference for analysis of mixed mode I and II fracture behavior of brittle materials.展开更多
The former studies indicate that loading rates significantly affect dynamic behavior of brittle materials,for instance,the dynamic compressive and tensile strength increase with loading rates.However,there still are m...The former studies indicate that loading rates significantly affect dynamic behavior of brittle materials,for instance,the dynamic compressive and tensile strength increase with loading rates.However,there still are many unknown or partially unknown aspects.For example,whether loading rates have effect on crack dynamic propagating behavior(propagation toughness,velocity and arrest,etc).To further explore the effect of loading rates on crack dynamic responses,a large-size single-cleavage trapezoidal open(SCTO)specimen was proposed,and impacting tests using the SCTO specimen under drop plate impact were conducted.Crack propagation gauges(CPGs)were employed in measuring impact loads,crack propagation time and velocities.In order to verify the testing result,the corresponding numerical model was established using explicit dynamic software AUTODYN,and the simulation result is basically consistent with the experimental results.The ABAQUS software was used to calculate the dynamic SIFs.The universal function was calculated by fractal method.The experimental-numerical method was employed in determining initiation toughness and propagation toughness.The results indicate that crack propagating velocities,dynamic fracture toughness and energy release rates increase with loading rates;crack delayed initiation time decreases with loading rates.展开更多
Anti symmetric four point bending specimens with different thickness, without and with guiding grooves, were used to conduct Mode Ⅱ fracture test and study the effect of specimen thickness on Mode Ⅱ fracture toughne...Anti symmetric four point bending specimens with different thickness, without and with guiding grooves, were used to conduct Mode Ⅱ fracture test and study the effect of specimen thickness on Mode Ⅱ fracture toughness of rock. Numerical calculations show that the occurrence of Mode Ⅱ fracture in the specimens without guiding grooves (when the inner and outer loading points are moved close to the notch plane) and with guiding grooves is attributed to a favorable stress condition created for Mode Ⅱ fracture, i.e. tensile stress at the notch tip is depressed to be lower than the tensile strength or to be compressive stress, and the ratio of shear stress to tensile stress at notch tip is very high. The measured value of Mode Ⅱ fracture toughness K ⅡC decreases with the increase of the specimen thickness or the net thickness of specimen. This is because a thick specimen promotes a plane strain state and thus results in a relatively small fracture toughness.展开更多
Surface strain fields of the designed compact tension(CT)specimens were investigated by digital image correlation(DIC)method.An integrative computer program was developed based on DIC algorithms to characterize the st...Surface strain fields of the designed compact tension(CT)specimens were investigated by digital image correlation(DIC)method.An integrative computer program was developed based on DIC algorithms to characterize the strain fields accurately and graphically.Strain distribution of the CT specimen was predicted by finite element method(FEM).Good agreement is observed between the surface strain fields measured by DIC and predicted by FEM,which reveals that the proposed method is practical and effective to determine the strain fields of CT specimens.Moreover,strain fields of the CT specimens with various compressive loads and notch diameters were studied by DIC.The experimental results can provide effective reference to usage of CT specimens in triaxial creep test by appropriately selecting specimen and experiment parameters.展开更多
Pressure plate instrument is employed during drying, and unconfined compressive strength test is performed on the unsaturated specimen. Curves of shear force versus shear displacement, and curves of saturation degree ...Pressure plate instrument is employed during drying, and unconfined compressive strength test is performed on the unsaturated specimen. Curves of shear force versus shear displacement, and curves of saturation degree versus time are investigated. The results show that the specimens with similar curves of saturation degree versus time have nearly identical mechanical behavior. In particular, the uniform specimens should be chosen within the lower equilibrium saturation degree because steady test results are presented. Further, the conclusion is verified by the repeated test. Thus, the method for distinguishing the uniform unsaturated specimen is obtained. In the light of the method, an improved test process is proposed. The uniform specimens should be chosen by this method under the specific matric suction, and then shear tests are carried out on the chosen unsaturated specimen. Namely, initial value of unsaturated soil is not zero matric suction but a specific suction.展开更多
A new "conceptual" design named "double pull" specimen was proposed in order to measure the bond-slip(δ-τ) relationship of fiber reinforced polymer(FRP)-to-concrete interface more accurately.A fi...A new "conceptual" design named "double pull" specimen was proposed in order to measure the bond-slip(δ-τ) relationship of fiber reinforced polymer(FRP)-to-concrete interface more accurately.A finite element analysis(FEA) was performed for preliminarily evaluating the suitability of the proposed conceptual double pull specimen.Through the FEA,it was indicated that the FRP-to-concrete interface of the proposed conceptual specimen might subject to a much higher load level than that of the most commonly used simple shear specimen,showing a great potential for measuring δ-τ relationship more accurately.In the light of the conceptual specimen,a kind of "practical" double pull specimen was developed and proved to be more suitable for measuring δ-τ relationship through an exploratory experimental study with 20 specimens.Consequently,an experimental program with 10 double pull specimens was performed for measuring the ultimate slip δu which was difficult to capture by using the existing specimens.It is shown that the range of δu is 0.31-0.52 mm based on the test results.The suggestion for improving the measure method is also put forward.展开更多
John Clare is widely known as a nature poet in British romantic literature.Critics often focus quite exclusively on his poetic works therefore,most of his natural prose writings have been constantly neglected.In fact,...John Clare is widely known as a nature poet in British romantic literature.Critics often focus quite exclusively on his poetic works therefore,most of his natural prose writings have been constantly neglected.In fact,in addition to presenting the artistic values,Clare' s poems and prose also jointly contribute to the scientific values from the aspect of natural history studies.Through comparative studies with the contemporary nature writers,one can grasp Clare' s contribution concerning botanical and zoological aspects respectively,This paper aims at demonstrating the linking role between scientific studies and homeland protection in the typical "Clarean" nature writing.展开更多
In the measurement of damping material's dynamic mechanical performance(DMP) using flexural resonating cantilever beam method,the specimen's adhesive characteristic influences the test precision and accuracy. ...In the measurement of damping material's dynamic mechanical performance(DMP) using flexural resonating cantilever beam method,the specimen's adhesive characteristic influences the test precision and accuracy. Taking its effect into account,the improved measurement equations based on the resonance method are presented. The simulated results show that,for the sake of weakening the adhesive's influence on the measured results,the adhesive should be spreaded as thin as possible when specimen is prepared,the adhesive's density and loss factor should be selected as small as possible also,and its Young's modulus should be selected according to the damping material being measured;the same adhesion condition effects differently on the test results of different damping materials,i.e. the error due to the adhesive is more inconspicuous if the damping layer has bigger thickness,modulus,loss factor and a certain density according to the damping material being measured. These conclusions provide theoretical basis for selecting adhesive,improving adhesion technology,and designing specimen.展开更多
基金Projects(51925402,52334005,52304094)supported by the National Natural Science Foundation of ChinaProject(20201102004)supported by the Shanxi Science and Technology Major Project,China。
文摘The mechanical properties of residual coal pillars under the influence of upward mining disturbances significantly affect the safety of residual mining activities on working faces.This study conducted low-frequency disturbance dynamic uniaxial compression tests on coal specimens using a self-developed dynamic-static load coupling electro-hydraulic servo system,and studied the strength evolutions,surface deformations,acoustic emission(AE)characteristic parameters,and the failure modes of coal specimens with different static preloading levels were studied.The disturbance damage is positively correlated with the coal specimen static preload level.Specifically,the cumulative AE count rates of the initial accelerated damage stage for the coal specimens with static preloading level of 60%and 70%of the uniaxial compressive strength(UCS)were 2.66 and 3.19 times that of the 50%UCS specimens,respectively.Macroscopically,this behaviour manifested as a decrease in the compressive strength,and the mean strengths of the disturbance-damaged coal specimens with 60%and 70%of UCS static preloading decreased by 8.53%and 9.32%,respectively,compared to those of the specimens under pure static loading.The crack sources,such as the primary fissures,strongly control the dynamic response of the coal specimen.The difference between the dynamic responses of the coal specimens and that of dense rocks is significant.
文摘A simultaneous experimental and numerical study on crack propagation in the pre-cracked beams specimens(concrete-like materials) is carried out using three-point bending flexural test. The crack propagation and coalescence paths of internal cracks in side beam specimens are experimentally studied by inserting double internal cracks. The effects of crack positions on the fracturing path in the bridge areas of the double cracked beam specimens are also studied. It has been observed that the breaking of concrete-like cracked beams specimens occurs mainly by the propagation of wing cracks emanating from the tips of the pre-existing cracks in the numerical and experimental analyses, respectively. The same specimens are numerically simulated by an indirect boundary element method(IBEM) known as displacement discontinuity method(DDM) using higher displacement discontinuity. These numerical results are compared with the existing experimental results. This comparison illustrates the higher accuracy of the results obtained by the indirect boundary element method by using only a small number of elements compared with the discrete element method(PFC2D code).
文摘The mechanism of cracks propagation and cracks coalescence due to compressive loading of the brittle substances containing pre-existing cracks （flaws） was modeled experimentally using specially made rock-like specimens from Portland Pozzolana Cement （PPC）. The breakage process of the specimens was studied by inserting single and double flaws with different inclination angles at the center and applying uniaxial compressive stress at both ends of the specimen. The first crack was oriented at 50＆#176; from the horizontal direction and kept constant throughout the analysis while the orientation of the second crack was changed. It is experimentally observed that the wing cracks are produced at the first stage of loading and start their propagation toward the direction of uniaxial compressive loading. The secondary cracks may also be produced in form of quasi-coplanar and/or oblique cracks in a stable manner. The secondary cracks may eventually continue their propagation in the direction of maximum principle stress. These experimental works were also simulated numerically by a modified higher order displacement discontinuity method and the cracks propagation and cracks coalescence were studied based on Mode I and Mode II stress intensity factors （SIFs）. It is concluded that the wing cracks initiation stresses for the specimens change from 11.3 to 14.1 MPain the case of numerical simulations and from 7.3 to 13.8 MPa in the case of experimental works. It is observed that cracks coalescence stresses change from 21.8 to 25.3 MPa and from 19.5 to 21.8 MPa in the numerical and experimental analyses, respectively. Comparing some of the numerical and experimental results with those recently cited in the literature validates the results obtained by the proposed study. Finally, a numerical simulation was accomplished to study the effect of confining pressure on the crack propagation process, showing that the SIFs increase and the crack initiation angles change in this case.
文摘A new technique, involving tool making, clearing, staining, cutting and mounting specimens on slides, was described for studying Collembola taxonomy. It could resolve the problem of observing Collembola glass specimens under standard optical microscopy, because the phase-contrast microscope has not been available for all researchers. A type of micro cutting probe （about 1 μm in tip diameter） was designed, and it made the cutting method go from two-handed to one-handed, which was a huge step forward in the cutting method of Collembola. The micro cutting probe was custom designed for Collembola using two electric grinders, followed by ferric tannate staining with a stable blue color, mounting in specialized solutions and sealing with a neutral quick-drying gum. We also described a method to make glass capillary extractor and glass capillary brush to make sure a better condition of cleared specimens.
文摘Crystal of barium boric oxide(BBO) crystallizes in trigollal system. Imperfections in two specimens of(001)plates (one being transparent and the other containing inclusions)in the crystals have been identified by X-ray topography.
基金Project(51038004) supported by the National Natural Science Foundation of China
文摘In order to verify the validity of finite element numerical simulation method for asphalt mixture, which consists of aggregates, mastic （where mastic is a kind of fine mixture composed of asphalt binder mixed with fines and fine aggregates） and air voids, based on three-dimensional （3D） heterogeneous specimen, X-ray computerized tomography （X-ray CT） was used to scan the asphalt specimens to obtain the real internal microstrnctures of asphalt mixture. CT images were reconstructed to build up 3D digital specimen, and the viscoelastic properties of mastic were described with Burgers model The uniaxial creep numerical simulations of three different levels of aggregate gradation were conducted. The simulation results agree well with the experimental results. The numerical simulation of asphalt mixture incorporated with real 3D microstructure based on finite element method is a promising application to conduct research of asphalt concrete. Additionally, this method can increase the mechanistic understanding of global viscoelastic properties of asphalt mixtures by linking the real 3D microstructure.
基金Projects(52004182,51804110,51904101)supported by the National Natural Science Foundation of ChinaProject(2020JJ5188)supported by the Natural Science Foundation of Hunan Province,China。
文摘The asymmetric semi-circular bend(ASCB)specimen has been proposed to investigate the cracking behavior in different geo and construction materials and attracted the attention of researchers due to its advantages.However,there are few studies on the fracture toughness determination of rock materials.In this work,a series of fracture tests were performed with the ASCB specimens made of granite.The onset of fracture,crack initiation angle and crack propagating trajectory was analyzed in detail combined with several mixed mode fracture criteria.The influence of the crack length on the mode Ⅰ/Ⅱ fracture toughness was studied.A comparison between the fracture toughness ratios predicted by varying criteria and experimental results was conducted.The relationship between experimentally determined crack initiation angles and curves of the generalized maximum tangential stress(GMTS)criterion was obtained.The fracture process of the specimen was recorded with the high-speed camera.The shortcomings of the ASCB specimens for the fracture toughness determination of rock materials were discussed.The results may provide a reference for analysis of mixed mode I and II fracture behavior of brittle materials.
基金Projects(11672194,U19A2098)supported by the National Natural Science Foundation of ChinaProject(2018SCU12047)supported by Fundamental Research Funds for the Central Universities,ChinaProject(2018JZ0036)supported by the Project of Science and Technology of Sichuan Province,China。
文摘The former studies indicate that loading rates significantly affect dynamic behavior of brittle materials,for instance,the dynamic compressive and tensile strength increase with loading rates.However,there still are many unknown or partially unknown aspects.For example,whether loading rates have effect on crack dynamic propagating behavior(propagation toughness,velocity and arrest,etc).To further explore the effect of loading rates on crack dynamic responses,a large-size single-cleavage trapezoidal open(SCTO)specimen was proposed,and impacting tests using the SCTO specimen under drop plate impact were conducted.Crack propagation gauges(CPGs)were employed in measuring impact loads,crack propagation time and velocities.In order to verify the testing result,the corresponding numerical model was established using explicit dynamic software AUTODYN,and the simulation result is basically consistent with the experimental results.The ABAQUS software was used to calculate the dynamic SIFs.The universal function was calculated by fractal method.The experimental-numerical method was employed in determining initiation toughness and propagation toughness.The results indicate that crack propagating velocities,dynamic fracture toughness and energy release rates increase with loading rates;crack delayed initiation time decreases with loading rates.
基金TheNationalNaturalScienceFoundationofChina (No :496 72 16 4)
文摘Anti symmetric four point bending specimens with different thickness, without and with guiding grooves, were used to conduct Mode Ⅱ fracture test and study the effect of specimen thickness on Mode Ⅱ fracture toughness of rock. Numerical calculations show that the occurrence of Mode Ⅱ fracture in the specimens without guiding grooves (when the inner and outer loading points are moved close to the notch plane) and with guiding grooves is attributed to a favorable stress condition created for Mode Ⅱ fracture, i.e. tensile stress at the notch tip is depressed to be lower than the tensile strength or to be compressive stress, and the ratio of shear stress to tensile stress at notch tip is very high. The measured value of Mode Ⅱ fracture toughness K ⅡC decreases with the increase of the specimen thickness or the net thickness of specimen. This is because a thick specimen promotes a plane strain state and thus results in a relatively small fracture toughness.
基金Projects(51575347,51405297,51204107)supported by the National Natural Science Foundation of China
文摘Surface strain fields of the designed compact tension(CT)specimens were investigated by digital image correlation(DIC)method.An integrative computer program was developed based on DIC algorithms to characterize the strain fields accurately and graphically.Strain distribution of the CT specimen was predicted by finite element method(FEM).Good agreement is observed between the surface strain fields measured by DIC and predicted by FEM,which reveals that the proposed method is practical and effective to determine the strain fields of CT specimens.Moreover,strain fields of the CT specimens with various compressive loads and notch diameters were studied by DIC.The experimental results can provide effective reference to usage of CT specimens in triaxial creep test by appropriately selecting specimen and experiment parameters.
基金Project(51179023) supported by the National Natural Science Foundation of China
文摘Pressure plate instrument is employed during drying, and unconfined compressive strength test is performed on the unsaturated specimen. Curves of shear force versus shear displacement, and curves of saturation degree versus time are investigated. The results show that the specimens with similar curves of saturation degree versus time have nearly identical mechanical behavior. In particular, the uniform specimens should be chosen within the lower equilibrium saturation degree because steady test results are presented. Further, the conclusion is verified by the repeated test. Thus, the method for distinguishing the uniform unsaturated specimen is obtained. In the light of the method, an improved test process is proposed. The uniform specimens should be chosen by this method under the specific matric suction, and then shear tests are carried out on the chosen unsaturated specimen. Namely, initial value of unsaturated soil is not zero matric suction but a specific suction.
基金Project(2006BAJ03A07) supported by the National Key Technologies R & D Program of ChinaProject(5008283) supported by the Natural Science Foundation of Guangdong Province, China
文摘A new "conceptual" design named "double pull" specimen was proposed in order to measure the bond-slip(δ-τ) relationship of fiber reinforced polymer(FRP)-to-concrete interface more accurately.A finite element analysis(FEA) was performed for preliminarily evaluating the suitability of the proposed conceptual double pull specimen.Through the FEA,it was indicated that the FRP-to-concrete interface of the proposed conceptual specimen might subject to a much higher load level than that of the most commonly used simple shear specimen,showing a great potential for measuring δ-τ relationship more accurately.In the light of the conceptual specimen,a kind of "practical" double pull specimen was developed and proved to be more suitable for measuring δ-τ relationship through an exploratory experimental study with 20 specimens.Consequently,an experimental program with 10 double pull specimens was performed for measuring the ultimate slip δu which was difficult to capture by using the existing specimens.It is shown that the range of δu is 0.31-0.52 mm based on the test results.The suggestion for improving the measure method is also put forward.
文摘John Clare is widely known as a nature poet in British romantic literature.Critics often focus quite exclusively on his poetic works therefore,most of his natural prose writings have been constantly neglected.In fact,in addition to presenting the artistic values,Clare' s poems and prose also jointly contribute to the scientific values from the aspect of natural history studies.Through comparative studies with the contemporary nature writers,one can grasp Clare' s contribution concerning botanical and zoological aspects respectively,This paper aims at demonstrating the linking role between scientific studies and homeland protection in the typical "Clarean" nature writing.
基金Sponsored by the New Century Excellent Talent Project(NCET-06-0883)
文摘In the measurement of damping material's dynamic mechanical performance(DMP) using flexural resonating cantilever beam method,the specimen's adhesive characteristic influences the test precision and accuracy. Taking its effect into account,the improved measurement equations based on the resonance method are presented. The simulated results show that,for the sake of weakening the adhesive's influence on the measured results,the adhesive should be spreaded as thin as possible when specimen is prepared,the adhesive's density and loss factor should be selected as small as possible also,and its Young's modulus should be selected according to the damping material being measured;the same adhesion condition effects differently on the test results of different damping materials,i.e. the error due to the adhesive is more inconspicuous if the damping layer has bigger thickness,modulus,loss factor and a certain density according to the damping material being measured. These conclusions provide theoretical basis for selecting adhesive,improving adhesion technology,and designing specimen.
