This paper describes numerical simulation on dispersion of the solid-liquid mixed fuel driven by explosion load. A model used in numerical calculation for dispersion of solid-liquid mixed fuel was established in this ...This paper describes numerical simulation on dispersion of the solid-liquid mixed fuel driven by explosion load. A model used in numerical calculation for dispersion of solid-liquid mixed fuel was established in this study. The concentration and turbulent intensity in the multiphase cloud of the solidliquid mixed fuel were obtained by numerical simulation. It was found that the fuel concentration tended to be 0.15 kg/m^3, the turbulence intensity tended to be 7 in 90 ms. The numerical results agree with those measured in the experiment.展开更多
Based on RNG k-ε turbulence model and sliding grid technique, solid-liquid two-phase three-dimensional(3-D) unsteady turbulence of full passage in slurry pump was simulated by means of Fluent software. The effects of...Based on RNG k-ε turbulence model and sliding grid technique, solid-liquid two-phase three-dimensional(3-D) unsteady turbulence of full passage in slurry pump was simulated by means of Fluent software. The effects of unsteady flow characteristics on solid-liquid two-phase flow and pump performance were researched under design condition. The results show that clocking effect has a significant influence on the flow in pump, and the fluctuation of flow velocity and pressure is obvious, particularly near the volute tongue, at the position of small sections of volute and within diffuser. Clocking effect has a more influence on liquid-phase than on solid-phase, and the wake-jet structure of relative velocity of solid-phase is less obvious than liquid-phase near the volute tongue and the impeller passage outlet. The fluctuation of relative velocity of solid-phase flow is 7.6% smaller than liquid-phase flow at the impeller outlet on circular path. Head and radial forces of the impeller are 8.1% and 85.7% of fluctuation, respectively. The results provide a theoretical basis for further research for turbulence, improving efficient, reducing the hydraulic losses and wear. Finally, field tests were carried out to verify the operation and wear of slurry pump.展开更多
The stratification phenomenon resulting from differences in the physical properties of solid-liquid components seriously affect the final combustion and explosion characteristics of mixed fuel under the action of osci...The stratification phenomenon resulting from differences in the physical properties of solid-liquid components seriously affect the final combustion and explosion characteristics of mixed fuel under the action of oscillation.The effects of oscillation on the physical stability of mixed fuel with two solid-liquid ratios and three liquid component distribution ratios have been investigated using a self-designed experimental system at oscillation frequencies of 60-300 r/min.The explosion characteristics of mixed fuel before and after oscillation are gained from a 20 L spherical explosion container system.When the mass ratio of liquid components is controlled at 66.9%,64.7%,62.6%the final explosion characteristics are stable,with a maximum difference of only 0.71%.The volume of liquid fuel precipitation increases with increasing oscillation frequency when the mass ratio of liquid components reaches 71.7%,69.6%,67.7%.The fuel explosion overpressure after oscillation decreases with increasing liquid precipitation volume,and the repeatability is poor,with a maximum standard deviation of 82.736,which is much higher than the ratio without stratification.Properly controlling the mass ratio of liquid components of the mixed fuel can effectively combat the impact of oscillation on the physical state and maintain the stability of the final explosion characteristics.展开更多
In this paper,super-thin free-standing diamond grains-nickel composite film in large area were prepared by using electrotyping method,which were used to make super-thin cutting blades.Scanning electron microscope(SEM)...In this paper,super-thin free-standing diamond grains-nickel composite film in large area were prepared by using electrotyping method,which were used to make super-thin cutting blades.Scanning electron microscope(SEM) were used to analyse the characteristics of the film.It was found that the agitation velocity and the place of impeller strongly affected the content and uniformity of diamond grains in deposited composite film when the other parameters were the same.The best film was deposited when agitation velocity was 180-220 r/m and the impeller was placed in the lower part of the solution.The obliquity of cathode strongly affected the content of diamond grains in the film,and the content reached maximum when the obliquity was kept at 45 degree.The hanging orientation of cathode strongly affected the uniformity of the thickness of the film,and uniform films were deposited when cathode was intermissively circumrotated by 90 degree in the plane itself during deposition.The fluid field in solid-liquid stirred electrolytic solution was analysed by using Computational Fluid Dynamics(CFD).And the influences of agitation velocity, the place of impeller and the obliquity of cathode on the content of diamond grains in the film were explained.With Euler-Lagrange model,the just-suspended speed of impeller in solid-liquid stirred electrolytic tank was predicted by using Zwietering formula,the predicted speed was and it was consistent with experimental result.展开更多
基金supported by National Key R&D Program of China(No.2016YFC0801800)the opening project of State Key Laboratory of Explosion Science and Technology(Beijing Institute ofTechnology)(No.KFJJ18-03M)
文摘This paper describes numerical simulation on dispersion of the solid-liquid mixed fuel driven by explosion load. A model used in numerical calculation for dispersion of solid-liquid mixed fuel was established in this study. The concentration and turbulent intensity in the multiphase cloud of the solidliquid mixed fuel were obtained by numerical simulation. It was found that the fuel concentration tended to be 0.15 kg/m^3, the turbulence intensity tended to be 7 in 90 ms. The numerical results agree with those measured in the experiment.
基金Project(51375498)supported by the National Natural Science Foundation of China
文摘Based on RNG k-ε turbulence model and sliding grid technique, solid-liquid two-phase three-dimensional(3-D) unsteady turbulence of full passage in slurry pump was simulated by means of Fluent software. The effects of unsteady flow characteristics on solid-liquid two-phase flow and pump performance were researched under design condition. The results show that clocking effect has a significant influence on the flow in pump, and the fluctuation of flow velocity and pressure is obvious, particularly near the volute tongue, at the position of small sections of volute and within diffuser. Clocking effect has a more influence on liquid-phase than on solid-phase, and the wake-jet structure of relative velocity of solid-phase is less obvious than liquid-phase near the volute tongue and the impeller passage outlet. The fluctuation of relative velocity of solid-phase flow is 7.6% smaller than liquid-phase flow at the impeller outlet on circular path. Head and radial forces of the impeller are 8.1% and 85.7% of fluctuation, respectively. The results provide a theoretical basis for further research for turbulence, improving efficient, reducing the hydraulic losses and wear. Finally, field tests were carried out to verify the operation and wear of slurry pump.
文摘The stratification phenomenon resulting from differences in the physical properties of solid-liquid components seriously affect the final combustion and explosion characteristics of mixed fuel under the action of oscillation.The effects of oscillation on the physical stability of mixed fuel with two solid-liquid ratios and three liquid component distribution ratios have been investigated using a self-designed experimental system at oscillation frequencies of 60-300 r/min.The explosion characteristics of mixed fuel before and after oscillation are gained from a 20 L spherical explosion container system.When the mass ratio of liquid components is controlled at 66.9%,64.7%,62.6%the final explosion characteristics are stable,with a maximum difference of only 0.71%.The volume of liquid fuel precipitation increases with increasing oscillation frequency when the mass ratio of liquid components reaches 71.7%,69.6%,67.7%.The fuel explosion overpressure after oscillation decreases with increasing liquid precipitation volume,and the repeatability is poor,with a maximum standard deviation of 82.736,which is much higher than the ratio without stratification.Properly controlling the mass ratio of liquid components of the mixed fuel can effectively combat the impact of oscillation on the physical state and maintain the stability of the final explosion characteristics.
文摘In this paper,super-thin free-standing diamond grains-nickel composite film in large area were prepared by using electrotyping method,which were used to make super-thin cutting blades.Scanning electron microscope(SEM) were used to analyse the characteristics of the film.It was found that the agitation velocity and the place of impeller strongly affected the content and uniformity of diamond grains in deposited composite film when the other parameters were the same.The best film was deposited when agitation velocity was 180-220 r/m and the impeller was placed in the lower part of the solution.The obliquity of cathode strongly affected the content of diamond grains in the film,and the content reached maximum when the obliquity was kept at 45 degree.The hanging orientation of cathode strongly affected the uniformity of the thickness of the film,and uniform films were deposited when cathode was intermissively circumrotated by 90 degree in the plane itself during deposition.The fluid field in solid-liquid stirred electrolytic solution was analysed by using Computational Fluid Dynamics(CFD).And the influences of agitation velocity, the place of impeller and the obliquity of cathode on the content of diamond grains in the film were explained.With Euler-Lagrange model,the just-suspended speed of impeller in solid-liquid stirred electrolytic tank was predicted by using Zwietering formula,the predicted speed was and it was consistent with experimental result.
