Ab initio calculations are used to understand the fundamental mechanism of the solid solution softening/hardening of the Mo-binary system.The results reveal that the Mo-Ti,Mo-Ta,Mo-Nb,and Mo-W interactions are primari...Ab initio calculations are used to understand the fundamental mechanism of the solid solution softening/hardening of the Mo-binary system.The results reveal that the Mo-Ti,Mo-Ta,Mo-Nb,and Mo-W interactions are primarily attractive with negative heats of formation,while the interactions of Mo-Re,and Mo-Zr would be mainly repulsive with positive heats of formation.It is also shown that the addition of Re and Zr would cause the solid solution softening of Mo by the decrease of the unstable stacking fault energy and the increase of ductility.On the contrary,the elements of W,Ta,Ti,and Nb could bring about the solid-solution hardening of Mo through the impediment of the slip of the dislocation and the decrease of ductility.Electronic structures indicate that the weaker/stronger chemical bonding due to the alloying elements should fundamentally induce the solid solution softening/hardening of Mo.The results are discussed and compared with available evidence in literatures,which could deepen the fundamental understanding of the solid solution softening/hardening of the binary metallic system.展开更多
The effect of strain hardening and strain softening behavior of flow stress changing with temperature on welding residual stress, plastic strain and welding distortion of ATN0 1-T4 aluminum alloy was studied by finite...The effect of strain hardening and strain softening behavior of flow stress changing with temperature on welding residual stress, plastic strain and welding distortion of ATN0 1-T4 aluminum alloy was studied by finite simulation method. The simulation results show that the weld seam undergoes strain hardening in the temperature range of 180-250 ℃, however, it exhibits strain softening at temperature above 250 ℃ during welding heating and cooling process. As a result, the strain hardening and strain softening effects counteract each other, introducing slightly influence on the welding residual stress, residual plastic strain and distortion. The welding longitudinal residual stress was determined by ultrasonic stress measurement method for the flat plates of A7N01-T4 aluminum alloy. The simulation results are well accordant with test ones.展开更多
This study proposed a new and more flexible S-shaped rock damage evolution model from a phenomenological perspective based on an improved Logistic function to describe the characteristics of the rock strain softening ...This study proposed a new and more flexible S-shaped rock damage evolution model from a phenomenological perspective based on an improved Logistic function to describe the characteristics of the rock strain softening and damage process.Simultaneously,it established a constitutive model capable of describing the entire process of rock pre-peak compaction and post-peak strain softening deformation,considering the nonlinear effects of the initial compaction stage of rocks,combined with damage mechanics theory and effective medium theory.In addition,this research verified the rationality of the constructed damage constitutive model using results from uniaxial and conventional triaxial compression tests on Miluo granite,yellow sandstone,mudstone,and glutenite.The results indicate that based on the improved Logistic function,the theoretical damage model accurately describes the entire evolution of damage characteristics during rock compression deformation,from maintenance through gradual onset,accelerated development to deceleration and termination,in a simple and unified expression.At the same time,the constructed constitutive model can accurately simulate the stress-strain process of different rock types under uniaxial and conventional triaxial compression,and the theoretical model curve closely aligns with experimental data.Compared to existing constitutive models,the proposed model has significant advantages.The damage model parameters a,r and β have clear physical meanings and interact competitively,where the three parameters collectively determine the shape of the theoretical stress−strain curve.展开更多
Effect of Ti addition on the microstructure and strengthening behavior in press hardening steels(PHS)was analyzed by optical metallography(OM),scanning electron microscopy(SEM),transmission electron microscopy(TEM)and...Effect of Ti addition on the microstructure and strengthening behavior in press hardening steels(PHS)was analyzed by optical metallography(OM),scanning electron microscopy(SEM),transmission electron microscopy(TEM)and X-ray diffraction(XRD).The results show that the microstructure of PHS is martensite,and two sizes of particles disperse in the martensite matrix during the forming and quenching process.The size of the bigger particles is between 100 and 200 nm,and the small particles are nanometer-sized.The quantity of the particles has a positive relation with the Ti content.More importantly,the microstructure and strengthening mechanism are affected by the precipitating behavior of the particles.Besides the prior austenite grain,martensite packet,block and lath are refined by Ti addition.The steels are strengthened by the fine grains,martensite substructure and precipitates.The uniformly distributed dislocation in the martensite lath,the density of which is between 3.0?10^(14) cm^(–2) and 5.0?10^(14) cm^(–2),strengthens the steels through associating with fine carbide particles.展开更多
A set of analytical equations for the variation of the axial force along depth and the pile-top load-settle-ment curve were established, using tri-linear softening model to pile-side soil and bilinear hardening model ...A set of analytical equations for the variation of the axial force along depth and the pile-top load-settle-ment curve were established, using tri-linear softening model to pile-side soil and bilinear hardening model to pile-end soil . Influences of the pile-side and pile-end soil behavior on the load-settlement curve were discussed, indica-ting that the lowering reason for the variation step degree of the axial force along depth is the softening of the pile-side soil to result in the side friction lowering when the pile-top load is increased. To verify the reliability of thismethod, the parameters used in calculation are obtained from the test in Zhuzhou area. The obtained results are thencompared with the tested results. Contrast shows that the calculated results and the tested values are very close,which illustrates that the proposed method is reliable.展开更多
Based on the framework of critical state soil mechanics,a subloading surface plastic model for sand, being applicable to cyclic loading, was proposed. The model can be used to describe strain softening behaviour of sa...Based on the framework of critical state soil mechanics,a subloading surface plastic model for sand, being applicable to cyclic loading, was proposed. The model can be used to describe strain softening behaviour of sand under monotonic loading when the similarity-ratio equals to unity. The characteristics of the model are as follows: 1) A reverse bullet-shaped yield surface is adopted to ensure accurate prediction of the behavior of sand, instead of bullet-shaped or elliptical yield surface in Cam-Clay model. 2) No unique relationship between void ratio and the mean normal stress for sand prevents the direct coupling of yield surface size to void ratio, so incremental deviatoric strain hardening rule is used. 3) The model combines the concept of state-dependent dilatancy by incorporating state parameter in Rowe's stress dilatancy equation, which accounts for the dependence of dilatancy on the stress state and the material internal state. A single set of model constants, which is calibrated, can simulate stress-strain response under different initial void ratios and different confine pressures. The model is validated true by comparing predicted results with experimental results under monotonic and cyclic loading conditions.展开更多
Firstly, using the damage model for rock based on Lemaitre hypothesis about strain equivalence, a new technique for measuring strength of rock micro-cells by adopting the Mohr-Coulomb criterion was developed, and a st...Firstly, using the damage model for rock based on Lemaitre hypothesis about strain equivalence, a new technique for measuring strength of rock micro-cells by adopting the Mohr-Coulomb criterion was developed, and a statistical damage evolution equation was established based on the property that strength of micro-cells is consistent with normal distribution function, through discussing the characteristics of random distributions for strength of micro-cells, then a statistical damage constitutive model that can simulate the full process of rock strain softening under specific confining pressure was set up. Secondly, a new method to determine the model parameters which can be applied to the situations under different confining pressures was proposed, by deeply studying the relations between the model parameters and characteristic parameters of the full stress-strain curve under different confining pressures. Therefore, a unified statistical damage constitutive model for rock softening which can reflect the effect of different confining pressures was set up. This model makes the physical property of model parameters explicit, contains only conventional mechanical parameters, and leads its application more convenient. Finally, the rationality of this model and its parameters-determining method were identified via comparative analyses between theoretical and experimental curves.展开更多
A new method was proposed to predict the limited compaction grouting pressure for the soft soils. Theoretical basis of the method considered the conical shear failure above the grout bulb. Using the Mohr-Coulomb yield...A new method was proposed to predict the limited compaction grouting pressure for the soft soils. Theoretical basis of the method considered the conical shear failure above the grout bulb. Using the Mohr-Coulomb yield criterion as the initial yield function, the limited compaction grouting pressure was determined, according to the softening elastic-plastic model based on the conventional triaxial compression tests to simulate the strain softening soils. The small strain in the elastic zone and large stain in the plastic zone and the rational yield function for the strain softening phase stage, the analytical solutions to the compaction grouting pressure were presented. The results indicate reasonable agreement and show a good potential of the proposed method for rationally optimizing the design of compaction grouting operations.展开更多
Considering the influence of strain softening, the solutions of stress, displacement, plastic softening region radius and plastic residual region radius were derived for circular openings in nonlinear rock masses subj...Considering the influence of strain softening, the solutions of stress, displacement, plastic softening region radius and plastic residual region radius were derived for circular openings in nonlinear rock masses subjected to seepage. The radial stress distribution curve, ground reaction curve, and relation curve between plastic softening region radius and supporting force in three different conditions were drawn respectively. From the comparisons among these results for different conditions, it is found that when the supporting force is the same, the displacement of tunnel wall considering both seepage and strain softening is 85.71% greater than that only considering seepage. The increase values of radial displacement at 0.95 m and plastic softening region radius at 6.6 m show that the seepage and strain softening have the most unfavorable effects on circular opening stability in strain softening rock masses.展开更多
In national economy and national defense, a lot of ma chine components become worthless early because of wear and tear and corrode. It leads to huge loss of resource and material. Surface hardening of the steel cou ld...In national economy and national defense, a lot of ma chine components become worthless early because of wear and tear and corrode. It leads to huge loss of resource and material. Surface hardening of the steel cou ld form a hard, wearable, corrode-resisting layer on the surface to enhance the mechanical property of the machine component. From 1980s, there is a new method of surface hardening that is heating with plasma arc. It overcomes the shortage of old methods and is adopted in automotive product industry. The plasma equipm ent is small and easy to be controlled, so it could be installed on a robot and moved everywhere. This paper analyzed the character of the plasma at first, then studied the plasm a arc as Guess distribution circular heat source to create the surface hardening temperature field and heating process. The method of the plasma arc surface har dening technology is given. This paper describes hardware design of the plasma arc surface-hardening robot and analyzes its kinematics. This robot is a humanoid form robot with a mobile p latform, a 7 DOF redundancy arm and a 2 DOF trunk. The footprint is an important feature for the robot that has to move in a cluttered environment. Thus the mob ile platform of the plasma arc robot is an omni-directional mobile robot with o rthogonal-wheel assemblies. The trunk is important for keep balance of the robo t. Thus a series spring is fixed in the trunk to provide accurate force feedback at each direction and insulate the shock loads from arm and mobile platform. Th e redundancy arm configuration is similar to a broadly simplified model of the h uman arm with 7 DOF. The maximum radius is about 1 m with a maximum load of abou t 1 kg. The redundancy of the 7 DOF allows the handling of situation in whic h additional movement constraints have to meet and avoids static or dynamic obst acles. It has better adaptation to typical human environment and to allow for hu man-like behavioral strategies in solving complex tasks. This robot will be applied widely in shipbuilding industry, mining industry and automotive product industry.展开更多
The closed form solutions of the stress and displacement in strain softening rock mass around a newly formed cavity are derived with a three step-wise elasto-plastic model. Hoek-Brown criterion is adopted as the yield...The closed form solutions of the stress and displacement in strain softening rock mass around a newly formed cavity are derived with a three step-wise elasto-plastic model. Hoek-Brown criterion is adopted as the yielding criterion of rock mass. Damage factors are proposed to account for degradation of the material parameters to reflect the degree of strain softening. The surrounding rock mass around the cavity is divided into three regions: elastic region, strain softening region and residual state region. The analytical solutions of stress, strain, displacement and radius of each region are obtained. The effects of the strain softening and shear dilatancy behavior on the results are investigated with parametric studies. The results show that the radii of the residual state region and strain softening region in the surrounding rock mass with higher damage degree are larger. The radii of the residual state region and strain softening region are 1-2 times and 1.5-3 times of the cavity radius, respectively. The radial and tangential stresses decrease with the increase of the damage factor. The displacement of the cavity wall for the case with maximum plastic bulk strain is nearly twice than that with no dilation. Rock mass moves more toward the center for the case with larger damage factor and shear dilation. The area of the plastic region is larger when the damage factors are considered. The displacements in the surrounding rock mass increase with the increase of the damage factors and shear dilation factors. The solutions can be applied to the stability analysis and support design of the underground excavation.展开更多
A modified plastic strain energy as hardening state parameter for dense sand was proposed, based on the results front a series of drained plane strain tests on saturated dense Japanese Toyoura sand with precise stress...A modified plastic strain energy as hardening state parameter for dense sand was proposed, based on the results front a series of drained plane strain tests on saturated dense Japanese Toyoura sand with precise stress and strain measurements along many stress paths. In addition, a unique hardening function between the plastic strain energy and the instantaneous stress path was also presented, which was independent of stress history. The proposed state parameter and hardening function was directly verified by the simple numerical integration method. It is shown that the proposed hardening function is independent of stress history and stress path and is appropriate to be used as the hardening rule in constitutive modeling for dense sand, and it is also capable of simulating the effects on the de-formation characteristics of stress history and stress path for dense sand.展开更多
In the industrial production, the dynamic cooling pre-aging treatment was employed to replace the isothermal pre-aging during the continuous heat treatment production of Al-Mg-Si alloy automotive sheets. The effects o...In the industrial production, the dynamic cooling pre-aging treatment was employed to replace the isothermal pre-aging during the continuous heat treatment production of Al-Mg-Si alloy automotive sheets. The effects of dynamic cooling pre-aging treatment on mechanical properties and paint-bake hardening behavior of an Al-Mg-Si alloy sheet are proposed in this study. The scanning electron microscopy, transmission electron microscopy, tensile test, Vickers hardness test, and differential scanning calorimetry were conducted for the purpose. It was found that the dynamic cooling pre-aging treatment at low temperature region led to the decreasing of cluster II, resulting in the deterioration of the ability of the paint-bake hardening. With the increase of the cooling pre-aging temperature, the increasing of cluster II effectively improved the stability against natural aging and the paint-bake hardening ability. The optimized dynamic cooling pre-aging temperature was ~150 ℃. In this condition, the hardness increase of the alloy sheet with pre-aging treatment is low during storage at room temperature. The high yield strength increment is obtained after paint-bake hardening.展开更多
The multiple cracking and deflection hardening performance of polyvinyl alcohol fiber reinforced engineered cementitious composites(PVA-ECC)under four-point flexural loading have been investigated.Matrices with differ...The multiple cracking and deflection hardening performance of polyvinyl alcohol fiber reinforced engineered cementitious composites(PVA-ECC)under four-point flexural loading have been investigated.Matrices with different binder combinations and W/B ratios(from 0.44 to 0.78)providing satisfactory PVA fiber dispersion were specially designed.Effect of pre-existing flaw size distribution modification on deflection hardening behavior was comparatively studied by adding 3 mm diameter polyethylene beads into the mixtures(6%by total volume).Natural flaw size distributions of composites without beads were determined by cross sectional analysis.The crack number and crack width distributions of specimens after flexural loading were characterized and the possible causes of changes in multiple cracking and deflection hardening behavior by flaw size distribution modification were discussed.Promising results from the view point of deflection hardening behavior were obtained from metakaolin incorporated and flaw size distribution modified PVA-ECCs prepared with W/B=0.53.The dual roles of W/B ratio and superplasticizer content on flaw size distribution,cracking potential and fiber-matrix bond behavior were evaluated.Flaw size distribution modification is found beneficial in terms of ductility improvement at an optimized W/B ratio.展开更多
In order to study the effect of dynamic recrystallization on the metal flow behavior during thermal deformation,the elevated temperature compression experiments of CuCrZr alloy and 35CrMo steel are carried out using G...In order to study the effect of dynamic recrystallization on the metal flow behavior during thermal deformation,the elevated temperature compression experiments of CuCrZr alloy and 35CrMo steel are carried out using Gleeble-3810 thermal simulator.It is proved that the samples underwent obvious dynamic recrystallization behavior during thermal deformation by microstructure observation of deformed specimens.The size of recrystallized grains increases as the temperature improved and the strain rate decreased.Meanwhile,the net softening rate caused by dynamic recrystallization is determined based on the stress-dislocation relationship.It can be found that the value of net softening rate increases quadratically as the Z parameter decreases,and the dynamic recrystallization net softening rate of CuCrZr alloy and 35CrMo steel are calculated to be 21.9%and 29.8%,respectively.Based on the dynamic recrystallization softening effect proposed,the novel elevated temperature flow constitutive models of two different alloys are proposed,and the related parameters are well defined and solved in detail.The predicted values of the obtained models are agreed well with the experimental values.展开更多
In order to investigate and predict the material properties of curved surface AISI 1045 steel component during spot continual induction hardening(SCIH),a 3D model for curved surface workpieces which coupled electromag...In order to investigate and predict the material properties of curved surface AISI 1045 steel component during spot continual induction hardening(SCIH),a 3D model for curved surface workpieces which coupled electromagnetic,temperature and phase transformation fields was built by finite element software ANSYS.A small size inductor and magnetizer were used in this model,which can move along the top surface of workpiece flexibly.The effect of inductor moving velocity and workpiece radius on temperature field was analyzed and the heating delay phenomenon was found through comparing the simulated results.The temperature field results indicate that the heating delay phenomenon is more obvious under high inductor moving velocity condition.This trend becomes more obvious if the workpiece radius becomes larger.The predictions of microstructure and micro-hardness distribution were also carried out via this model.The predicted results show that the inductor moving velocity is the dominated factor for the distribution of 100% martensite region and phase transformation region.The influencing factor of workpiece radius on 100% martensite region and phase transformation region distribution is obvious under relatively high inductor moving velocity but inconspicuous under relatively low inductor moving velocity.展开更多
To study the mechanics of work-hardening and annealing-softening, a series of experiments were conducted on samples of 304 austenitic stainless steel sheets. In addition, transmission electron microscopy （TEM）, scan...To study the mechanics of work-hardening and annealing-softening, a series of experiments were conducted on samples of 304 austenitic stainless steel sheets. In addition, transmission electron microscopy （TEM）, scanning electron microscopy （SEM）, and tensile testing were carried out to study changes and mechanisms of the stainless steel structures and properties during work-hardening and annealing-softening. The results indicate that annealing at low temperatures （100-500 ~C） can only remove partial residual stresses in the sample and the softening via annealing is not obvious. Bright annealing and rapid cooling in a protective atmosphere can completely soften the cold-worked material. In addition, the low-temperature sample without a protective atmosphere only has a little oxidation on the surface, but at higher temperature the oxidized layer is very thick. Thus, high-temperature annealing should include bright annealing.展开更多
Most conventional ceramic based aluminum metal matrix composites(MMCs) are either heavy,costly or combination of both. In order to reduce cost and weight,while at the same time maintaining quality,cow horn particles(C...Most conventional ceramic based aluminum metal matrix composites(MMCs) are either heavy,costly or combination of both. In order to reduce cost and weight,while at the same time maintaining quality,cow horn particles(CHp) was used with aluminum alloy A356 to produce MMC for brake drum application and other engineering uses. The aim of this research is to model the age hardening process of the produced composite using response surface methodology(RSM) and artificial neural network(ANN),and to use the developed ANN as fitness function for a simulated annealing optimization algorithm(SA-NN system) for optimization of age hardening process parameters. The results show that ANN modeled the age hardening data excellently and better than RSM with a correlation coefficient of experimental response with ANN predictions being 0.9921 as against 0.9583 for the RSM. The SA-NN system optimized process parameters were in very close agreement with the experimental values with the maximum relative error of 1.2%,minimum of 0.35% and average of 0.71%.展开更多
The plane structure of bars jointed to a rigid-body is a complex and universal structure.Some other structure of bars can be considered as its special cases. Many material have different stress-strain relation in tens...The plane structure of bars jointed to a rigid-body is a complex and universal structure.Some other structure of bars can be considered as its special cases. Many material have different stress-strain relation in tension and compression, generally the relation is nonlinear. In this paper,we use the constitutive model of linearly elastic and power hardening of strength difference to analyze plane structure of bars. The displacement method is used to derive the universal expression of calculating stress and strain. The nonlinear equations for computing displacements of the rigid-body has been given and general computing program has been worked out. This problem has been solved satisfactorily.展开更多
基金Project(51801129)supported by the National Natural Science Foundation of ChinaProject supported by the State Key Laboratory of Powder Metallurgy,China。
文摘Ab initio calculations are used to understand the fundamental mechanism of the solid solution softening/hardening of the Mo-binary system.The results reveal that the Mo-Ti,Mo-Ta,Mo-Nb,and Mo-W interactions are primarily attractive with negative heats of formation,while the interactions of Mo-Re,and Mo-Zr would be mainly repulsive with positive heats of formation.It is also shown that the addition of Re and Zr would cause the solid solution softening of Mo by the decrease of the unstable stacking fault energy and the increase of ductility.On the contrary,the elements of W,Ta,Ti,and Nb could bring about the solid-solution hardening of Mo through the impediment of the slip of the dislocation and the decrease of ductility.Electronic structures indicate that the weaker/stronger chemical bonding due to the alloying elements should fundamentally induce the solid solution softening/hardening of Mo.The results are discussed and compared with available evidence in literatures,which could deepen the fundamental understanding of the solid solution softening/hardening of the binary metallic system.
基金Project(2007DFR70070) supported by China-Russia Government-to-Government Scientific and Technical Cooperation Foundation
文摘The effect of strain hardening and strain softening behavior of flow stress changing with temperature on welding residual stress, plastic strain and welding distortion of ATN0 1-T4 aluminum alloy was studied by finite simulation method. The simulation results show that the weld seam undergoes strain hardening in the temperature range of 180-250 ℃, however, it exhibits strain softening at temperature above 250 ℃ during welding heating and cooling process. As a result, the strain hardening and strain softening effects counteract each other, introducing slightly influence on the welding residual stress, residual plastic strain and distortion. The welding longitudinal residual stress was determined by ultrasonic stress measurement method for the flat plates of A7N01-T4 aluminum alloy. The simulation results are well accordant with test ones.
基金Project(52074299)supported by the National Natural Science Foundation of ChinaProjects(2023JCCXSB02,BBJ2024083)supported by the Fundamental Research Funds for the Central Universities,China。
文摘This study proposed a new and more flexible S-shaped rock damage evolution model from a phenomenological perspective based on an improved Logistic function to describe the characteristics of the rock strain softening and damage process.Simultaneously,it established a constitutive model capable of describing the entire process of rock pre-peak compaction and post-peak strain softening deformation,considering the nonlinear effects of the initial compaction stage of rocks,combined with damage mechanics theory and effective medium theory.In addition,this research verified the rationality of the constructed damage constitutive model using results from uniaxial and conventional triaxial compression tests on Miluo granite,yellow sandstone,mudstone,and glutenite.The results indicate that based on the improved Logistic function,the theoretical damage model accurately describes the entire evolution of damage characteristics during rock compression deformation,from maintenance through gradual onset,accelerated development to deceleration and termination,in a simple and unified expression.At the same time,the constructed constitutive model can accurately simulate the stress-strain process of different rock types under uniaxial and conventional triaxial compression,and the theoretical model curve closely aligns with experimental data.Compared to existing constitutive models,the proposed model has significant advantages.The damage model parameters a,r and β have clear physical meanings and interact competitively,where the three parameters collectively determine the shape of the theoretical stress−strain curve.
基金Project(U1460101)supported by the National Natural Science Foundation of ChinaProject(20120006120002)supported by Specialized Research Fund for the Doctoral Program of Higher Education,China
文摘Effect of Ti addition on the microstructure and strengthening behavior in press hardening steels(PHS)was analyzed by optical metallography(OM),scanning electron microscopy(SEM),transmission electron microscopy(TEM)and X-ray diffraction(XRD).The results show that the microstructure of PHS is martensite,and two sizes of particles disperse in the martensite matrix during the forming and quenching process.The size of the bigger particles is between 100 and 200 nm,and the small particles are nanometer-sized.The quantity of the particles has a positive relation with the Ti content.More importantly,the microstructure and strengthening mechanism are affected by the precipitating behavior of the particles.Besides the prior austenite grain,martensite packet,block and lath are refined by Ti addition.The steels are strengthened by the fine grains,martensite substructure and precipitates.The uniformly distributed dislocation in the martensite lath,the density of which is between 3.0?10^(14) cm^(–2) and 5.0?10^(14) cm^(–2),strengthens the steels through associating with fine carbide particles.
基金Project (01B028) supported by Department of Education of Hunan Province
文摘A set of analytical equations for the variation of the axial force along depth and the pile-top load-settle-ment curve were established, using tri-linear softening model to pile-side soil and bilinear hardening model to pile-end soil . Influences of the pile-side and pile-end soil behavior on the load-settlement curve were discussed, indica-ting that the lowering reason for the variation step degree of the axial force along depth is the softening of the pile-side soil to result in the side friction lowering when the pile-top load is increased. To verify the reliability of thismethod, the parameters used in calculation are obtained from the test in Zhuzhou area. The obtained results are thencompared with the tested results. Contrast shows that the calculated results and the tested values are very close,which illustrates that the proposed method is reliable.
基金Project(07JCZDJC09800) supported by Tianjin Natural Science FoundationProject(07FDZDSF01200) supported by Tianjin Science and Technology Innovation Special Funds
文摘Based on the framework of critical state soil mechanics,a subloading surface plastic model for sand, being applicable to cyclic loading, was proposed. The model can be used to describe strain softening behaviour of sand under monotonic loading when the similarity-ratio equals to unity. The characteristics of the model are as follows: 1) A reverse bullet-shaped yield surface is adopted to ensure accurate prediction of the behavior of sand, instead of bullet-shaped or elliptical yield surface in Cam-Clay model. 2) No unique relationship between void ratio and the mean normal stress for sand prevents the direct coupling of yield surface size to void ratio, so incremental deviatoric strain hardening rule is used. 3) The model combines the concept of state-dependent dilatancy by incorporating state parameter in Rowe's stress dilatancy equation, which accounts for the dependence of dilatancy on the stress state and the material internal state. A single set of model constants, which is calibrated, can simulate stress-strain response under different initial void ratios and different confine pressures. The model is validated true by comparing predicted results with experimental results under monotonic and cyclic loading conditions.
基金Project (50378036) supported by the National Natural Science Foundation of China Project (03JJY5024) supported by the Natural Science Foundation of Hunan Province, China
文摘Firstly, using the damage model for rock based on Lemaitre hypothesis about strain equivalence, a new technique for measuring strength of rock micro-cells by adopting the Mohr-Coulomb criterion was developed, and a statistical damage evolution equation was established based on the property that strength of micro-cells is consistent with normal distribution function, through discussing the characteristics of random distributions for strength of micro-cells, then a statistical damage constitutive model that can simulate the full process of rock strain softening under specific confining pressure was set up. Secondly, a new method to determine the model parameters which can be applied to the situations under different confining pressures was proposed, by deeply studying the relations between the model parameters and characteristic parameters of the full stress-strain curve under different confining pressures. Therefore, a unified statistical damage constitutive model for rock softening which can reflect the effect of different confining pressures was set up. This model makes the physical property of model parameters explicit, contains only conventional mechanical parameters, and leads its application more convenient. Finally, the rationality of this model and its parameters-determining method were identified via comparative analyses between theoretical and experimental curves.
基金Project (200550) supported by the Foundation for the Author of National Excellent Doctoral Dissertation of ChinaProject (09JJ1008) supported by Hunan Provincial Natural Science Foundation of China
文摘A new method was proposed to predict the limited compaction grouting pressure for the soft soils. Theoretical basis of the method considered the conical shear failure above the grout bulb. Using the Mohr-Coulomb yield criterion as the initial yield function, the limited compaction grouting pressure was determined, according to the softening elastic-plastic model based on the conventional triaxial compression tests to simulate the strain softening soils. The small strain in the elastic zone and large stain in the plastic zone and the rational yield function for the strain softening phase stage, the analytical solutions to the compaction grouting pressure were presented. The results indicate reasonable agreement and show a good potential of the proposed method for rationally optimizing the design of compaction grouting operations.
基金Project(09JJ1008) supported by Hunan Provincial Science Foundation of ChinaProject(200550) supported by the Foundation for the Author of National Excellent Doctoral Dissertation of China
文摘Considering the influence of strain softening, the solutions of stress, displacement, plastic softening region radius and plastic residual region radius were derived for circular openings in nonlinear rock masses subjected to seepage. The radial stress distribution curve, ground reaction curve, and relation curve between plastic softening region radius and supporting force in three different conditions were drawn respectively. From the comparisons among these results for different conditions, it is found that when the supporting force is the same, the displacement of tunnel wall considering both seepage and strain softening is 85.71% greater than that only considering seepage. The increase values of radial displacement at 0.95 m and plastic softening region radius at 6.6 m show that the seepage and strain softening have the most unfavorable effects on circular opening stability in strain softening rock masses.
文摘In national economy and national defense, a lot of ma chine components become worthless early because of wear and tear and corrode. It leads to huge loss of resource and material. Surface hardening of the steel cou ld form a hard, wearable, corrode-resisting layer on the surface to enhance the mechanical property of the machine component. From 1980s, there is a new method of surface hardening that is heating with plasma arc. It overcomes the shortage of old methods and is adopted in automotive product industry. The plasma equipm ent is small and easy to be controlled, so it could be installed on a robot and moved everywhere. This paper analyzed the character of the plasma at first, then studied the plasm a arc as Guess distribution circular heat source to create the surface hardening temperature field and heating process. The method of the plasma arc surface har dening technology is given. This paper describes hardware design of the plasma arc surface-hardening robot and analyzes its kinematics. This robot is a humanoid form robot with a mobile p latform, a 7 DOF redundancy arm and a 2 DOF trunk. The footprint is an important feature for the robot that has to move in a cluttered environment. Thus the mob ile platform of the plasma arc robot is an omni-directional mobile robot with o rthogonal-wheel assemblies. The trunk is important for keep balance of the robo t. Thus a series spring is fixed in the trunk to provide accurate force feedback at each direction and insulate the shock loads from arm and mobile platform. Th e redundancy arm configuration is similar to a broadly simplified model of the h uman arm with 7 DOF. The maximum radius is about 1 m with a maximum load of abou t 1 kg. The redundancy of the 7 DOF allows the handling of situation in whic h additional movement constraints have to meet and avoids static or dynamic obst acles. It has better adaptation to typical human environment and to allow for hu man-like behavioral strategies in solving complex tasks. This robot will be applied widely in shipbuilding industry, mining industry and automotive product industry.
基金Project(11102219) supported by the National Natural Science Foundation of ChinaProject(2013CB036405) supported by the National Basic Research Program of China
文摘The closed form solutions of the stress and displacement in strain softening rock mass around a newly formed cavity are derived with a three step-wise elasto-plastic model. Hoek-Brown criterion is adopted as the yielding criterion of rock mass. Damage factors are proposed to account for degradation of the material parameters to reflect the degree of strain softening. The surrounding rock mass around the cavity is divided into three regions: elastic region, strain softening region and residual state region. The analytical solutions of stress, strain, displacement and radius of each region are obtained. The effects of the strain softening and shear dilatancy behavior on the results are investigated with parametric studies. The results show that the radii of the residual state region and strain softening region in the surrounding rock mass with higher damage degree are larger. The radii of the residual state region and strain softening region are 1-2 times and 1.5-3 times of the cavity radius, respectively. The radial and tangential stresses decrease with the increase of the damage factor. The displacement of the cavity wall for the case with maximum plastic bulk strain is nearly twice than that with no dilation. Rock mass moves more toward the center for the case with larger damage factor and shear dilation. The area of the plastic region is larger when the damage factors are considered. The displacements in the surrounding rock mass increase with the increase of the damage factors and shear dilation factors. The solutions can be applied to the stability analysis and support design of the underground excavation.
文摘A modified plastic strain energy as hardening state parameter for dense sand was proposed, based on the results front a series of drained plane strain tests on saturated dense Japanese Toyoura sand with precise stress and strain measurements along many stress paths. In addition, a unique hardening function between the plastic strain energy and the instantaneous stress path was also presented, which was independent of stress history. The proposed state parameter and hardening function was directly verified by the simple numerical integration method. It is shown that the proposed hardening function is independent of stress history and stress path and is appropriate to be used as the hardening rule in constitutive modeling for dense sand, and it is also capable of simulating the effects on the de-formation characteristics of stress history and stress path for dense sand.
基金Project(2020YFF0218200) supported by the National Key R&D Program of China。
文摘In the industrial production, the dynamic cooling pre-aging treatment was employed to replace the isothermal pre-aging during the continuous heat treatment production of Al-Mg-Si alloy automotive sheets. The effects of dynamic cooling pre-aging treatment on mechanical properties and paint-bake hardening behavior of an Al-Mg-Si alloy sheet are proposed in this study. The scanning electron microscopy, transmission electron microscopy, tensile test, Vickers hardness test, and differential scanning calorimetry were conducted for the purpose. It was found that the dynamic cooling pre-aging treatment at low temperature region led to the decreasing of cluster II, resulting in the deterioration of the ability of the paint-bake hardening. With the increase of the cooling pre-aging temperature, the increasing of cluster II effectively improved the stability against natural aging and the paint-bake hardening ability. The optimized dynamic cooling pre-aging temperature was ~150 ℃. In this condition, the hardness increase of the alloy sheet with pre-aging treatment is low during storage at room temperature. The high yield strength increment is obtained after paint-bake hardening.
基金Project(114M246)supported by the Scientific and Technological Research Council of Turkey
文摘The multiple cracking and deflection hardening performance of polyvinyl alcohol fiber reinforced engineered cementitious composites(PVA-ECC)under four-point flexural loading have been investigated.Matrices with different binder combinations and W/B ratios(from 0.44 to 0.78)providing satisfactory PVA fiber dispersion were specially designed.Effect of pre-existing flaw size distribution modification on deflection hardening behavior was comparatively studied by adding 3 mm diameter polyethylene beads into the mixtures(6%by total volume).Natural flaw size distributions of composites without beads were determined by cross sectional analysis.The crack number and crack width distributions of specimens after flexural loading were characterized and the possible causes of changes in multiple cracking and deflection hardening behavior by flaw size distribution modification were discussed.Promising results from the view point of deflection hardening behavior were obtained from metakaolin incorporated and flaw size distribution modified PVA-ECCs prepared with W/B=0.53.The dual roles of W/B ratio and superplasticizer content on flaw size distribution,cracking potential and fiber-matrix bond behavior were evaluated.Flaw size distribution modification is found beneficial in terms of ductility improvement at an optimized W/B ratio.
基金Project(2019zzts525)supported by the Fundamental Research Funds for the Central Universities,ChinaProjects(U1837207,U1637601)supported by the National Natural Science Foundation of China
文摘In order to study the effect of dynamic recrystallization on the metal flow behavior during thermal deformation,the elevated temperature compression experiments of CuCrZr alloy and 35CrMo steel are carried out using Gleeble-3810 thermal simulator.It is proved that the samples underwent obvious dynamic recrystallization behavior during thermal deformation by microstructure observation of deformed specimens.The size of recrystallized grains increases as the temperature improved and the strain rate decreased.Meanwhile,the net softening rate caused by dynamic recrystallization is determined based on the stress-dislocation relationship.It can be found that the value of net softening rate increases quadratically as the Z parameter decreases,and the dynamic recrystallization net softening rate of CuCrZr alloy and 35CrMo steel are calculated to be 21.9%and 29.8%,respectively.Based on the dynamic recrystallization softening effect proposed,the novel elevated temperature flow constitutive models of two different alloys are proposed,and the related parameters are well defined and solved in detail.The predicted values of the obtained models are agreed well with the experimental values.
基金Project (51175392) supported by the National Natural Science Foundation of ChinaProject (2014BAA012) supported by the Key Project of Hubei Province Science & Technology Pillar Program,ChinaProjects (2012-IV-067,2013-VII-020) supported by the Fundamental Research Funds for the Central Universities of China
文摘In order to investigate and predict the material properties of curved surface AISI 1045 steel component during spot continual induction hardening(SCIH),a 3D model for curved surface workpieces which coupled electromagnetic,temperature and phase transformation fields was built by finite element software ANSYS.A small size inductor and magnetizer were used in this model,which can move along the top surface of workpiece flexibly.The effect of inductor moving velocity and workpiece radius on temperature field was analyzed and the heating delay phenomenon was found through comparing the simulated results.The temperature field results indicate that the heating delay phenomenon is more obvious under high inductor moving velocity condition.This trend becomes more obvious if the workpiece radius becomes larger.The predictions of microstructure and micro-hardness distribution were also carried out via this model.The predicted results show that the inductor moving velocity is the dominated factor for the distribution of 100% martensite region and phase transformation region.The influencing factor of workpiece radius on 100% martensite region and phase transformation region distribution is obvious under relatively high inductor moving velocity but inconspicuous under relatively low inductor moving velocity.
基金Project(2009D005002000003) supported by the Foundation for Fostering Outstanding Talents of Beijing,China
文摘To study the mechanics of work-hardening and annealing-softening, a series of experiments were conducted on samples of 304 austenitic stainless steel sheets. In addition, transmission electron microscopy （TEM）, scanning electron microscopy （SEM）, and tensile testing were carried out to study changes and mechanisms of the stainless steel structures and properties during work-hardening and annealing-softening. The results indicate that annealing at low temperatures （100-500 ~C） can only remove partial residual stresses in the sample and the softening via annealing is not obvious. Bright annealing and rapid cooling in a protective atmosphere can completely soften the cold-worked material. In addition, the low-temperature sample without a protective atmosphere only has a little oxidation on the surface, but at higher temperature the oxidized layer is very thick. Thus, high-temperature annealing should include bright annealing.
文摘Most conventional ceramic based aluminum metal matrix composites(MMCs) are either heavy,costly or combination of both. In order to reduce cost and weight,while at the same time maintaining quality,cow horn particles(CHp) was used with aluminum alloy A356 to produce MMC for brake drum application and other engineering uses. The aim of this research is to model the age hardening process of the produced composite using response surface methodology(RSM) and artificial neural network(ANN),and to use the developed ANN as fitness function for a simulated annealing optimization algorithm(SA-NN system) for optimization of age hardening process parameters. The results show that ANN modeled the age hardening data excellently and better than RSM with a correlation coefficient of experimental response with ANN predictions being 0.9921 as against 0.9583 for the RSM. The SA-NN system optimized process parameters were in very close agreement with the experimental values with the maximum relative error of 1.2%,minimum of 0.35% and average of 0.71%.
文摘The plane structure of bars jointed to a rigid-body is a complex and universal structure.Some other structure of bars can be considered as its special cases. Many material have different stress-strain relation in tension and compression, generally the relation is nonlinear. In this paper,we use the constitutive model of linearly elastic and power hardening of strength difference to analyze plane structure of bars. The displacement method is used to derive the universal expression of calculating stress and strain. The nonlinear equations for computing displacements of the rigid-body has been given and general computing program has been worked out. This problem has been solved satisfactorily.
