Na +-montmorillonite(Na +-MMT) was converted to organic montmorillonite(OMMT) using modifier which was synthesized at authors’ laboratory. PA6/OMMT nanocomposite was prepared via in situ intercalative polymerization....Na +-montmorillonite(Na +-MMT) was converted to organic montmorillonite(OMMT) using modifier which was synthesized at authors’ laboratory. PA6/OMMT nanocomposite was prepared via in situ intercalative polymerization. The limiting oxygen index (LOI), UL 94V flame retardancy and thermal stability of PA6/OMMT using thermal gravity analysis (TGA) were measured. The Fourier transform infrared (FTIR) technique was used to analyze the pyrolytic residuum and the cone calorimeter (CONE) was applied to determine a number of combustion parameters which were closely related to fire safety, including heat release rate, mass loss rate, effective combustion heat, total heat release, specific extinction area and the time of ignition. In addition, the elemental composition of the surface pyrolytic residuum and the corresponding X-ray photoelectron spectroscopy (XPS) data were obtained, and the morphology of the residuum from CONE measurement was examined by scanning electron microscope (SEM).展开更多
Three types of mine gas samples were used in the solutions of tetrahydrofuran(THF),sodium dodecyl sulfate(SDS)and THF-SDS with/without MMT respectively to investigate the effect of montmorillonite(MMT)on separation ch...Three types of mine gas samples were used in the solutions of tetrahydrofuran(THF),sodium dodecyl sulfate(SDS)and THF-SDS with/without MMT respectively to investigate the effect of montmorillonite(MMT)on separation characteristics of methane recovered from mine gas based on hydrate method.The partition coefficient,separation factor and recovery rate were used to evaluate the effects of MMT,and the selection factor was primarily proposed to define the selectivity of mine gas hydrate in the relative target gases.The experimental results indicate that MMT could improve the following factors including hydration separation factor,the selection factor,the partition coefficient,and the recovery rate.Furthermore,the effect of SDS on the function of MMT is analyzed in the process of hydration separation.Finally,due to the results of the experiment,it is concluded that MMT hydration mechanism explores the effect of MMT enrichment methane from mine gas.展开更多
The effects of the cell parameter and chemical composition on the surface charge properties of five kinds of different colour montmorillonites were studied. The results indicate that the surface isoelectric point（IEP...The effects of the cell parameter and chemical composition on the surface charge properties of five kinds of different colour montmorillonites were studied. The results indicate that the surface isoelectric point（IEP） of the montmorillonite shows positive correlation with the mass fractions of Fe203 and K20, but it has little relation to the mass fractions of other chemical compositions. At around pH=6.8, the surface zeta potential of the montmorillonite shows the negative relationship with the mass fractions of Fe203 and MgO, but it does not linearly correlate to the mass fractions of other chemical compositions. Cell parameter（bo） of the montmorillonite expresses negative linear relationship with mass fractions of K2O and Na2O, so does cosinβ with mass fractions of SlOE and Fe2O3. And there is no specific relationship between bo and IEP of different montmorillonites, but there is positive correlation between cosinβ and IEP of different montmorillonite samples.展开更多
In this paper,organic montmorillonite(OMMT)was added into crumb rubber modified asphalt(CRMA)to improve its high temperature performance,anti-aging performance and storage stability.The effects of different OMMT conte...In this paper,organic montmorillonite(OMMT)was added into crumb rubber modified asphalt(CRMA)to improve its high temperature performance,anti-aging performance and storage stability.The effects of different OMMT content on properties of CRMA were studied.The rutting factor obtained by dynamic shear rheological(DSR)test was adopted to evaluate the high-temperature performance.The creep stiffness and m value determined by the bending beam rheometer(BBR)test were employed to evaluate the low-temperature performance.The softening point,ductility,rutting factor before and after rolling thin film ovens test(RTFOT)and pressure aging vessel test(PAV)were compared to characterize the aging properties.Moreover,the segregation test after being reserved for 48 h and 7 d was conducted,and the softening point and rutting factor of upper and lower layers of segregation pipe were adopted to evaluate the storage stability.The results indicated that the high-temperature performance and anti-aging performance were developed with the increasing content of OMMT,while the low-temperature performance deteriorated.The storage stability was improved with the increasing content of OMMT before the content exceeded 4%,after which the storage stability declined.Taking account of all factors,it is suggested that the optimum content of OMMT is 3%−4%.展开更多
Na-montruorillonite （Na-MMT） was exchanged with three quaternary atkylphosphonium salts： decyl tributylphosphonium bromide （DTBPBr）, dodecyl tributylphosphonium bromide （DDTBPBr） and hexadecyl tributylphosphoni...Na-montruorillonite （Na-MMT） was exchanged with three quaternary atkylphosphonium salts： decyl tributylphosphonium bromide （DTBPBr）, dodecyl tributylphosphonium bromide （DDTBPBr） and hexadecyl tributylphosphonium bromide （HDTBPBr）, to investigate the effects of phosphonium salts species and relative molecular mass on the characteristics, morphology, thermal stability and long-acting antibacterial property of phosphonium montmorillonites. The resulting modified montmorillonites were characterized by the FTIR, XRD, TEM, and TG/DTG techniques. And minimum inhibitory concentration （MIC） was used to investigate antibacterial activity. The results show that the phosphonium salts are intercalated into Na-MMT, and the basal spacing of P-MMTs is enlarged with the increase of phosphonium salt content or the growth of alkyl chain length. DDTBP-MMT-3 with 19.83% （mass fraction of dodecyl tributylphosphonium salts, displays excellent thermal stability and long-acting antibacterial activity.展开更多
Different composites of organomodified montmorillonite(OMMT)/bitumen were prepared by melt blending with hexadecyl dimethyl benzyl ammonium modified montmorillonite(HBM) and double octadecyl dimethyl ammonium modified...Different composites of organomodified montmorillonite(OMMT)/bitumen were prepared by melt blending with hexadecyl dimethyl benzyl ammonium modified montmorillonite(HBM) and double octadecyl dimethyl ammonium modified montmorillonite(DOM).The structures of two kinds of montmorillonite modified bitumen were characterized by X-ray diffraction(XRD).The effects of different montmorillonites on the dynamic rheological properties of the modified bitumens were investigated by dynamic shear rheometer(DSR).The XRD results show that DOM modified bitumen forms an intercalated structure,whereas the HBM modified bitumen forms an exfoliated structure.DSR results indicate that OMMT modified bitumens exhibit higher complex modulus,lower phase angle than pristine bitumen,which means that the resistance to rutting at high temperatures of pristine bitumen is improved due to the introduction of OMMT.Compared with DOM modified bitumen,HBM modified bitumen shows better rutting resistance,which is contributed to the formation of exfoliated structure in HBM modified bitumen.展开更多
Organic montmorillonite(OMMT) modified bitumen nanocomposites was prepared by melt blending.The effects of thin-film oven test(TFOT) and pressure ageing vessel(PAV) on rheological properties of pristine bitumen and OM...Organic montmorillonite(OMMT) modified bitumen nanocomposites was prepared by melt blending.The effects of thin-film oven test(TFOT) and pressure ageing vessel(PAV) on rheological properties of pristine bitumen and OMMT modified bitumen were investigated by dynamic shear rheometer(DSR).The results show that complex modulus(G*) increases,phase angle(δ) decreases and rutting factor(G*/sin δ) is enhanced for the pristine bitumen after TFOT,whereas G*,δ and G*/sin δ of OMMT modified bitumen have a little change before and after TFOT.Besides,the pristine bitumen exhibits a large increase of G* and a great decrease of δ after PAV aging.However,the changes in G* and δ of OMMT modified bitumen are small before and after PAV.Compared with the pristine bitumen,OMMT modified bitumen presents a lower fatigue factor(G*sin δ) after PAV.As a consequence,resistance to thermal-oxidative aging of bitumen is remarkably improved due to the introduction of OMMT.展开更多
The interlayer clay-organic complex is an important clay-organic association in sedimentary environments. The interlayer region of clay minerals not only provides storage space for organic matter, but also possesses s...The interlayer clay-organic complex is an important clay-organic association in sedimentary environments. The interlayer region of clay minerals not only provides storage space for organic matter, but also possesses solid acid sites; and these acid sites were proposed to be involved with the transformation of organic matter into liquid and gaseous hydrocarbons. However, the effect of the organic matter storage in the interlayer space of clay minerals on the hydrocarbons generation has not been made clear. In this study, the interlayer complex of 12-aminolauric acid (ALA) and Na+-montmorillonite (Na+-Mt), labeled as ALAinter-Mt (Na), was synthesized to investigate the role of the interlayer space of montmorillonite in hydrocarbon generation. Simply mixed ALA-Mt complex [ALA-Mt (Na)] was also prepared for comparison. The pyrolysis of ALA and ALA-Mt complexes was studied using thermogravimetry coupled with Fourier transform infrared spectroscopy (TG-FTIR) and a high temperature-pressure system (a confined gold capsule-autoclave system).展开更多
Organoclays synthesized with small organic cations can effectively adsorb hydrophobic organic compounds (HOCs), and the hydrophobic siloxane surfaces of clay minerals have been considered as the main adsorption sites ...Organoclays synthesized with small organic cations can effectively adsorb hydrophobic organic compounds (HOCs), and the hydrophobic siloxane surfaces of clay minerals have been considered as the main adsorption sites for HOCs. Therefore, reducing charge density of clay minerals which can effectively increase the exposed siloxane surface areas has been generally used to enhance the adsorption capacity of organoclays towards HOCs. In this work, we will present a new method to increase the exposed siloxane surface areas of the synthesized organoclays and enhance their adsorption capacity. Firstly, the original inorganic cations on montmorillonite were exchanged with Li+, and then part of the Li+ (i.e., 20% to 60% of the montmorillonite’s CEC) were further exchanged with tetramethylammonium cation (TMA). After that ,the samples were heated at 200 ℃ for 12 h to make sure most of the Li+ were transferred to montmorillonite layers. With this method the layer charge of montmorillonite can be effectively reduced while the layered structure of montmorillonite will be preserved by pre-exchanged TMA. Finally, the remaining Li+ cations were further exchanged with TMA. The structural and adsorptive characteristics of the resulting organoclays were compared with those synthesized using traditional method (i.e., first reducing the charge density and then exchanging TMA).展开更多
The hydrated-titanium-oxide/montmorillonite composite samples were prepared using a hydrolysation- intercalation composite method by controlling the amount of TiOSO4·2H2O. The TiO2/montmorillonite composite sampl...The hydrated-titanium-oxide/montmorillonite composite samples were prepared using a hydrolysation- intercalation composite method by controlling the amount of TiOSO4·2H2O. The TiO2/montmorillonite composite samples were got after calculated at 700℃ and 1100 ℃. The results show that: when the value of Ti/montmorillonite is 12.5 mmol/g, the c axis of hydrated-titanium-oxide/ montmorillonite composite sample began to disorder, moreover, the crystal size of anatase is just 13.4nm in the TiO2/montmorillonite composite sample calculated at 700 ℃, and after calculated at 1100 ℃, the crystal size of anatase is 55.8 nm, and the relative content of anatase reaches the highest (55.7%). Compared with pure TiO2 nano-particle sample, TiO2/montmorillonite composite sample has a higher phase transition temperature from anatase phase to rutile phase and smaller crystal size of TiO2. Montmorillonite structure layer has a significant blocking effect on TiO2 phase transformation and grain growth, and the blocking effect reaches saturation when the value of Ti/montmorillonite is 12.5 mmol/g.展开更多
Shale gas, which is derived from organic matters in shale and stored in shale deposits, is an important unconventional gas resource and attracts attention due to its significant requirement in the hydrocarbon producti...Shale gas, which is derived from organic matters in shale and stored in shale deposits, is an important unconventional gas resource and attracts attention due to its significant requirement in the hydrocarbon production. Methane (CH4) is the dominant component of shale gas, and adsorbed gas is an important reservoir form. Many studies have investigated the adsorption capacities and adsorption mechanisms of CH4 in shale. Organic matters and clay minerals have been proposed to be the two major components for CH4 adsorption. Adsorption of CH4 in organic matters, such as the adsorption capacity and effects of characteristics of the organic matters, has been well investigated. However, studies on CH4 adsorption on clay minerals have mainly focused on evaluating the adsorption capacity, and very little information about the adsorption mechanism has been provided. For example, the adsorption sites and factors influencing CH4 adsorption on clay minerals remain unclear. Three main reasons account for this: (1) the co-existence of organic matters in samples affects the evaluation of CH4 adsorption on clay minerals; (2) the pressures used during adsorption are not representative of actual reservoir pressures; and (3) the clay minerals selected have low swelling capacity and a smaller interlayer distances than a CH4 size, resulting in the misunderstanding of the CH4 adsorption sites.展开更多
In order to make montmorillonite (MMT) nanosheets disperse in low-density polyethylene (LDPE) with highly homogeneous orientation, alternating voltage is applied to molten LDPE with MMT nanosheets. The effect of elect...In order to make montmorillonite (MMT) nanosheets disperse in low-density polyethylene (LDPE) with highly homogeneous orientation, alternating voltage is applied to molten LDPE with MMT nanosheets. The effect of electric field on the dispersion of MMT in the solidified LDPE is studied. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses suggest that the MMT nano- sheets are aligned with high anisotropy to the electric field direction, which is perpendicular to the LDPE film plane. Differential scanning calorimetry (DSC) results reveal that the crystallization degree of the oriented LDPE/MMT composite increases. Moreover, through a broadband dielectric spectroscopy analyzer, it is found that MMT manifests a significantly influence in the dielectric property of the oriented composite: the dielectric constant and loss tangent of the composite both become larger. Analysis shows that the electric field-induced torque caused by the polarization of MMT flakes is the main force inducing the orientation of the MMT flakes.展开更多
In the past four decades, there is a growing use of surfactant modified clay complexes in wide range of applications. The mostly used surfactants to modify the swelling clay minerals are cationic surfactants, such as ...In the past four decades, there is a growing use of surfactant modified clay complexes in wide range of applications. The mostly used surfactants to modify the swelling clay minerals are cationic surfactants, such as quaternary ammonium, which consists of two distinct moieties, a hydrophilic head, where the positive charge is concentrated, and a hydrophobic hydrocarbon chain tail. During the surface modification, this kind of surfactant molecules attach on the inner and outer surface of clay minerals, the hydrophilic surface of raw clay minerals may changed into hydrophobic surface. The changes of organophilicity and hydrophobicity of clay minerals enable them used in more wide fields, such as adsorbents for organic contaminant, geotechnical barriers, filling of nanocomposite, etc.展开更多
The experimental prediction of the mechanical properties of minerals remains difficult because of their small particle size (typically < 2 micrometers). This work aims at examining, the effect of an applied mechani...The experimental prediction of the mechanical properties of minerals remains difficult because of their small particle size (typically < 2 micrometers). This work aims at examining, the effect of an applied mechanical constraint on the hydration behaviour in the case of Na rich-montmorillonite and its relation with the elastic properties. The mechanical constraint is created, at the laboratory scale, by applying a monoaxial pressure for unstressed host material (i.e. Na rich montmorillonite). The structural analysis before and after stress is achieved using an XRD profile modeling approach. This investigation allowed us to determine several structural parameters related to the nature, abundance, size, position and organization of exchangeable cation and water molecule in the interlamellar space along the c* axis. In order to evaluate the affected elastic properties, the GULP code have been used to study the structure and the interlamellar organization. Indeed, the bulk modulus and elastic constants of montmorilonite have been calculated from first principles within density functional theory (DFT). The obtained Young’s modulus for Na-montmorillonite interlayer varies from 5 GPa to 16 GPa. According to the interlamellar space configuration the calculated elastic constant tensors indicate that the a direction is slightly more flexible than the b direction. The calculated elastic constant tensor along c is much lower than the constants calculated along a and b.展开更多
文摘Na +-montmorillonite(Na +-MMT) was converted to organic montmorillonite(OMMT) using modifier which was synthesized at authors’ laboratory. PA6/OMMT nanocomposite was prepared via in situ intercalative polymerization. The limiting oxygen index (LOI), UL 94V flame retardancy and thermal stability of PA6/OMMT using thermal gravity analysis (TGA) were measured. The Fourier transform infrared (FTIR) technique was used to analyze the pyrolytic residuum and the cone calorimeter (CONE) was applied to determine a number of combustion parameters which were closely related to fire safety, including heat release rate, mass loss rate, effective combustion heat, total heat release, specific extinction area and the time of ignition. In addition, the elemental composition of the surface pyrolytic residuum and the corresponding X-ray photoelectron spectroscopy (XPS) data were obtained, and the morphology of the residuum from CONE measurement was examined by scanning electron microscope (SEM).
基金Projects(51404102,51334005,51274267)supported by the National Natural Science Foundation of ChinaProject(UNPYSCT-2017140)supported by the Youth Innovation Personnel Training in University and College of Heilongjiang Province,China
文摘Three types of mine gas samples were used in the solutions of tetrahydrofuran(THF),sodium dodecyl sulfate(SDS)and THF-SDS with/without MMT respectively to investigate the effect of montmorillonite(MMT)on separation characteristics of methane recovered from mine gas based on hydrate method.The partition coefficient,separation factor and recovery rate were used to evaluate the effects of MMT,and the selection factor was primarily proposed to define the selectivity of mine gas hydrate in the relative target gases.The experimental results indicate that MMT could improve the following factors including hydration separation factor,the selection factor,the partition coefficient,and the recovery rate.Furthermore,the effect of SDS on the function of MMT is analyzed in the process of hydration separation.Finally,due to the results of the experiment,it is concluded that MMT hydration mechanism explores the effect of MMT enrichment methane from mine gas.
基金Project(2005CB623701) supported by the Major State Basic Research Development Program of China
文摘The effects of the cell parameter and chemical composition on the surface charge properties of five kinds of different colour montmorillonites were studied. The results indicate that the surface isoelectric point（IEP） of the montmorillonite shows positive correlation with the mass fractions of Fe203 and K20, but it has little relation to the mass fractions of other chemical compositions. At around pH=6.8, the surface zeta potential of the montmorillonite shows the negative relationship with the mass fractions of Fe203 and MgO, but it does not linearly correlate to the mass fractions of other chemical compositions. Cell parameter（bo） of the montmorillonite expresses negative linear relationship with mass fractions of K2O and Na2O, so does cosinβ with mass fractions of SlOE and Fe2O3. And there is no specific relationship between bo and IEP of different montmorillonites, but there is positive correlation between cosinβ and IEP of different montmorillonite samples.
基金Projects(51838001,51878070,51908069)supported by the National Natural Science Foundation of China。
文摘In this paper,organic montmorillonite(OMMT)was added into crumb rubber modified asphalt(CRMA)to improve its high temperature performance,anti-aging performance and storage stability.The effects of different OMMT content on properties of CRMA were studied.The rutting factor obtained by dynamic shear rheological(DSR)test was adopted to evaluate the high-temperature performance.The creep stiffness and m value determined by the bending beam rheometer(BBR)test were employed to evaluate the low-temperature performance.The softening point,ductility,rutting factor before and after rolling thin film ovens test(RTFOT)and pressure aging vessel test(PAV)were compared to characterize the aging properties.Moreover,the segregation test after being reserved for 48 h and 7 d was conducted,and the softening point and rutting factor of upper and lower layers of segregation pipe were adopted to evaluate the storage stability.The results indicated that the high-temperature performance and anti-aging performance were developed with the increasing content of OMMT,while the low-temperature performance deteriorated.The storage stability was improved with the increasing content of OMMT before the content exceeded 4%,after which the storage stability declined.Taking account of all factors,it is suggested that the optimum content of OMMT is 3%−4%.
基金Projects(20676049, 20871058) supported by the National Natural Science Foundation of China Project(05200555) supported by the Natural Science Foundation of Guangdong Province, China Projects(2007B090400105, 2008A010500005) supported by the Foundation of Enterprise-University-Research Institute Cooperation from Guangdong Province and Ministry of Education of China
文摘Na-montruorillonite （Na-MMT） was exchanged with three quaternary atkylphosphonium salts： decyl tributylphosphonium bromide （DTBPBr）, dodecyl tributylphosphonium bromide （DDTBPBr） and hexadecyl tributylphosphonium bromide （HDTBPBr）, to investigate the effects of phosphonium salts species and relative molecular mass on the characteristics, morphology, thermal stability and long-acting antibacterial property of phosphonium montmorillonites. The resulting modified montmorillonites were characterized by the FTIR, XRD, TEM, and TG/DTG techniques. And minimum inhibitory concentration （MIC） was used to investigate antibacterial activity. The results show that the phosphonium salts are intercalated into Na-MMT, and the basal spacing of P-MMTs is enlarged with the increase of phosphonium salt content or the growth of alkyl chain length. DDTBP-MMT-3 with 19.83% （mass fraction of dodecyl tributylphosphonium salts, displays excellent thermal stability and long-acting antibacterial activity.
基金Projects(50773061) Funded by the National Natural Science Foundation of China
文摘Different composites of organomodified montmorillonite(OMMT)/bitumen were prepared by melt blending with hexadecyl dimethyl benzyl ammonium modified montmorillonite(HBM) and double octadecyl dimethyl ammonium modified montmorillonite(DOM).The structures of two kinds of montmorillonite modified bitumen were characterized by X-ray diffraction(XRD).The effects of different montmorillonites on the dynamic rheological properties of the modified bitumens were investigated by dynamic shear rheometer(DSR).The XRD results show that DOM modified bitumen forms an intercalated structure,whereas the HBM modified bitumen forms an exfoliated structure.DSR results indicate that OMMT modified bitumens exhibit higher complex modulus,lower phase angle than pristine bitumen,which means that the resistance to rutting at high temperatures of pristine bitumen is improved due to the introduction of OMMT.Compared with DOM modified bitumen,HBM modified bitumen shows better rutting resistance,which is contributed to the formation of exfoliated structure in HBM modified bitumen.
基金Project(50773061) supported by the National Natural Science Foundation of China
文摘Organic montmorillonite(OMMT) modified bitumen nanocomposites was prepared by melt blending.The effects of thin-film oven test(TFOT) and pressure ageing vessel(PAV) on rheological properties of pristine bitumen and OMMT modified bitumen were investigated by dynamic shear rheometer(DSR).The results show that complex modulus(G*) increases,phase angle(δ) decreases and rutting factor(G*/sin δ) is enhanced for the pristine bitumen after TFOT,whereas G*,δ and G*/sin δ of OMMT modified bitumen have a little change before and after TFOT.Besides,the pristine bitumen exhibits a large increase of G* and a great decrease of δ after PAV aging.However,the changes in G* and δ of OMMT modified bitumen are small before and after PAV.Compared with the pristine bitumen,OMMT modified bitumen presents a lower fatigue factor(G*sin δ) after PAV.As a consequence,resistance to thermal-oxidative aging of bitumen is remarkably improved due to the introduction of OMMT.
文摘The interlayer clay-organic complex is an important clay-organic association in sedimentary environments. The interlayer region of clay minerals not only provides storage space for organic matter, but also possesses solid acid sites; and these acid sites were proposed to be involved with the transformation of organic matter into liquid and gaseous hydrocarbons. However, the effect of the organic matter storage in the interlayer space of clay minerals on the hydrocarbons generation has not been made clear. In this study, the interlayer complex of 12-aminolauric acid (ALA) and Na+-montmorillonite (Na+-Mt), labeled as ALAinter-Mt (Na), was synthesized to investigate the role of the interlayer space of montmorillonite in hydrocarbon generation. Simply mixed ALA-Mt complex [ALA-Mt (Na)] was also prepared for comparison. The pyrolysis of ALA and ALA-Mt complexes was studied using thermogravimetry coupled with Fourier transform infrared spectroscopy (TG-FTIR) and a high temperature-pressure system (a confined gold capsule-autoclave system).
文摘Organoclays synthesized with small organic cations can effectively adsorb hydrophobic organic compounds (HOCs), and the hydrophobic siloxane surfaces of clay minerals have been considered as the main adsorption sites for HOCs. Therefore, reducing charge density of clay minerals which can effectively increase the exposed siloxane surface areas has been generally used to enhance the adsorption capacity of organoclays towards HOCs. In this work, we will present a new method to increase the exposed siloxane surface areas of the synthesized organoclays and enhance their adsorption capacity. Firstly, the original inorganic cations on montmorillonite were exchanged with Li+, and then part of the Li+ (i.e., 20% to 60% of the montmorillonite’s CEC) were further exchanged with tetramethylammonium cation (TMA). After that ,the samples were heated at 200 ℃ for 12 h to make sure most of the Li+ were transferred to montmorillonite layers. With this method the layer charge of montmorillonite can be effectively reduced while the layered structure of montmorillonite will be preserved by pre-exchanged TMA. Finally, the remaining Li+ cations were further exchanged with TMA. The structural and adsorptive characteristics of the resulting organoclays were compared with those synthesized using traditional method (i.e., first reducing the charge density and then exchanging TMA).
文摘The hydrated-titanium-oxide/montmorillonite composite samples were prepared using a hydrolysation- intercalation composite method by controlling the amount of TiOSO4·2H2O. The TiO2/montmorillonite composite samples were got after calculated at 700℃ and 1100 ℃. The results show that: when the value of Ti/montmorillonite is 12.5 mmol/g, the c axis of hydrated-titanium-oxide/ montmorillonite composite sample began to disorder, moreover, the crystal size of anatase is just 13.4nm in the TiO2/montmorillonite composite sample calculated at 700 ℃, and after calculated at 1100 ℃, the crystal size of anatase is 55.8 nm, and the relative content of anatase reaches the highest (55.7%). Compared with pure TiO2 nano-particle sample, TiO2/montmorillonite composite sample has a higher phase transition temperature from anatase phase to rutile phase and smaller crystal size of TiO2. Montmorillonite structure layer has a significant blocking effect on TiO2 phase transformation and grain growth, and the blocking effect reaches saturation when the value of Ti/montmorillonite is 12.5 mmol/g.
文摘Shale gas, which is derived from organic matters in shale and stored in shale deposits, is an important unconventional gas resource and attracts attention due to its significant requirement in the hydrocarbon production. Methane (CH4) is the dominant component of shale gas, and adsorbed gas is an important reservoir form. Many studies have investigated the adsorption capacities and adsorption mechanisms of CH4 in shale. Organic matters and clay minerals have been proposed to be the two major components for CH4 adsorption. Adsorption of CH4 in organic matters, such as the adsorption capacity and effects of characteristics of the organic matters, has been well investigated. However, studies on CH4 adsorption on clay minerals have mainly focused on evaluating the adsorption capacity, and very little information about the adsorption mechanism has been provided. For example, the adsorption sites and factors influencing CH4 adsorption on clay minerals remain unclear. Three main reasons account for this: (1) the co-existence of organic matters in samples affects the evaluation of CH4 adsorption on clay minerals; (2) the pressures used during adsorption are not representative of actual reservoir pressures; and (3) the clay minerals selected have low swelling capacity and a smaller interlayer distances than a CH4 size, resulting in the misunderstanding of the CH4 adsorption sites.
基金Project supported by National Natural Science Foundation of China （50807054）.
文摘In order to make montmorillonite (MMT) nanosheets disperse in low-density polyethylene (LDPE) with highly homogeneous orientation, alternating voltage is applied to molten LDPE with MMT nanosheets. The effect of electric field on the dispersion of MMT in the solidified LDPE is studied. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses suggest that the MMT nano- sheets are aligned with high anisotropy to the electric field direction, which is perpendicular to the LDPE film plane. Differential scanning calorimetry (DSC) results reveal that the crystallization degree of the oriented LDPE/MMT composite increases. Moreover, through a broadband dielectric spectroscopy analyzer, it is found that MMT manifests a significantly influence in the dielectric property of the oriented composite: the dielectric constant and loss tangent of the composite both become larger. Analysis shows that the electric field-induced torque caused by the polarization of MMT flakes is the main force inducing the orientation of the MMT flakes.
文摘In the past four decades, there is a growing use of surfactant modified clay complexes in wide range of applications. The mostly used surfactants to modify the swelling clay minerals are cationic surfactants, such as quaternary ammonium, which consists of two distinct moieties, a hydrophilic head, where the positive charge is concentrated, and a hydrophobic hydrocarbon chain tail. During the surface modification, this kind of surfactant molecules attach on the inner and outer surface of clay minerals, the hydrophilic surface of raw clay minerals may changed into hydrophobic surface. The changes of organophilicity and hydrophobicity of clay minerals enable them used in more wide fields, such as adsorbents for organic contaminant, geotechnical barriers, filling of nanocomposite, etc.
文摘The experimental prediction of the mechanical properties of minerals remains difficult because of their small particle size (typically < 2 micrometers). This work aims at examining, the effect of an applied mechanical constraint on the hydration behaviour in the case of Na rich-montmorillonite and its relation with the elastic properties. The mechanical constraint is created, at the laboratory scale, by applying a monoaxial pressure for unstressed host material (i.e. Na rich montmorillonite). The structural analysis before and after stress is achieved using an XRD profile modeling approach. This investigation allowed us to determine several structural parameters related to the nature, abundance, size, position and organization of exchangeable cation and water molecule in the interlamellar space along the c* axis. In order to evaluate the affected elastic properties, the GULP code have been used to study the structure and the interlamellar organization. Indeed, the bulk modulus and elastic constants of montmorilonite have been calculated from first principles within density functional theory (DFT). The obtained Young’s modulus for Na-montmorillonite interlayer varies from 5 GPa to 16 GPa. According to the interlamellar space configuration the calculated elastic constant tensors indicate that the a direction is slightly more flexible than the b direction. The calculated elastic constant tensor along c is much lower than the constants calculated along a and b.
