A virtual sieving experimental simulation system was built using physical simulation principles.The effects of vibration frequency and amplitude,the inclination angle of the screen-deck and the vibration direction ang...A virtual sieving experimental simulation system was built using physical simulation principles.The effects of vibration frequency and amplitude,the inclination angle of the screen-deck and the vibration direction angle of screen on single particle kinematics were predicted.Properties such as the average velocity and the average throw height were studied.The results show that the amplitude and the angle of vibration have a great effect on particle average velocity and average height.The vibration frequency and the screen-deck inclination angle appear to have little influence on these responses.For materials that are difficult to screen the vibration frequency and amplitude,the screen-deck inclination angle and the vibration angle should be set to 14 Hz,6.6 mm,6° and 40°,respectively,to obtain optimal particle kinematics.A screening process can be simulated reliably by means of a virtual experiment and these results provide references for both screening theory research and sieving practice.展开更多
In order to improve the quality of laneways and tunnel excavation by drilling and blasting and by making effective use of explosive energy, a model experiment of rock blasting with a single borehole and a double free-...In order to improve the quality of laneways and tunnel excavation by drilling and blasting and by making effective use of explosive energy, a model experiment of rock blasting with a single borehole and a double free-surface was performed with the objective of studying the effect of parameters such as charge structure, free-surface and rock compressive strength on rock blasting.The model experiments indicate that:1) the smaller the rock compressive strength and density, the more distinctive the cavity expanding action by blasting;2) the powder factor in an air-decoupling charge structure is larger than that in a coupling charge structure, i.e., the explosive energy in an air-decoupling charge structure transferred to the rocks is less than that in a coupling charge structure;3) a free-surface improves the utilizations of explosive energy;4) an air-decoupling charge structure helps to maintain the integrity and stability of wall rock in controlled perimeter blasting, such as in roadways and tunnel excavation by drilling and blasting.展开更多
In this paper the single-event responses of the silicon germanium heterojunction bipolar transistors(SiGe HBTs) are investigated by TCAD simulations and laser microbeam experiment. A three-dimensional(3D) simulation m...In this paper the single-event responses of the silicon germanium heterojunction bipolar transistors(SiGe HBTs) are investigated by TCAD simulations and laser microbeam experiment. A three-dimensional(3D) simulation model is established, the single event effect(SEE) simulation is further carried out on the basis of Si Ge HBT devices, and then, together with the laser microbeam test, the charge collection behaviors are analyzed, including the single event transient(SET) induced transient terminal currents, and the sensitive area of SEE charge collection. The simulations and experimental results are discussed in detail and it is demonstrated that the nature of the current transient is controlled by the behaviors of the collector–substrate(C/S) junction and charge collection by sensitive electrodes, thereby giving out the sensitive area and electrode of SiGe HBT in SEE.展开更多
With extensive use of flash-based field-programmable gate arrays(FPGAs) in military and aerospace applications, single-event effects(SEEs) of FPGAs induced by radiations have been a major concern. In this paper, we pr...With extensive use of flash-based field-programmable gate arrays(FPGAs) in military and aerospace applications, single-event effects(SEEs) of FPGAs induced by radiations have been a major concern. In this paper, we present SEE experimental study of a flash-based FPGA from Microsemi Pro ASIC3 product family. The relation between the cross section and different linear energy transfer(LET) values for the logic tiles and embedded RAM blocks is obtained. The results show that the sequential logic cross section depends not too much on operating frequency of the device. And the relationship between 0 →1 upsets(zeros) and 1 →0 upsets(ones) is different for different kinds of D-flip-flops. The devices are not sensitive to SEL up to a LET of 99.0 Me V cm2/mg.Post-beam tests show that the programming module is damaged due to the high-LET ions.展开更多
The contribution of parasitic bipolar amplification to SETs is experimentally verified using two P-hit target chains in the normal layout and in the special layout. For PMOSs in the normal layout, the single-event cha...The contribution of parasitic bipolar amplification to SETs is experimentally verified using two P-hit target chains in the normal layout and in the special layout. For PMOSs in the normal layout, the single-event charge collection is composed of diffusion, drift, and the parasitic bipolar effect, while for PMOSs in the special layout, the parasitic bipolar junction transistor cannot turn on. Heavy ion experimental results show that PMOSs without parasitic bipolar amplification have a 21.4% decrease in the average SET pulse width and roughly a 40.2% reduction in the SET cross-section.展开更多
Rapid advances in deep-sea mining engineering have created an urgent need for the accurate evaluation of the undrained strength of marine soils,especially surface soils.Significant achievements have been made using fu...Rapid advances in deep-sea mining engineering have created an urgent need for the accurate evaluation of the undrained strength of marine soils,especially surface soils.Significant achievements have been made using full-flow penetration penetrometers to evaluate marine soil strength in the deep penetration;however,a method considering the effect of ambient water on the surface penetration needs to be established urgently.In this study,penetrometers with multiple probes were developed and used to conduct centrifuge experiments on South China Sea soil and kaolin clay.First,the forces on the probes throughout the penetration process were systematically analyzed and quantified.Second,the spatial influence zone was determined by capturing the resistance changes and sample crack development,and the penetration depth for a sample to reach a stable failure mode was given.Third,the vane shear strength was used to invert the penetration resistance factor of the ball and determine the range of the penetration resistance factor values.Furthermore,a methodology to determine the penetration resistance factors for surface marine soils was established.Finally,the effect of the water cavity above various probes in the surface penetration was used to formulate an internal mechanism for variations in the penetration resistance factor.展开更多
This paper studies the exciton-longitudinal-optical-phonon coupling in InGaN/GaN single quantum wells with various cap layer thicknesses by low temperature photoluminescence （PL） measurements. With increasing cap la...This paper studies the exciton-longitudinal-optical-phonon coupling in InGaN/GaN single quantum wells with various cap layer thicknesses by low temperature photoluminescence （PL） measurements. With increasing cap layer thickness, the PL peak energy shifts to lower energy and the coupling strength between the exciton and longitudinal- optical （LO） phonon, described by Huang-Rhys factor, increases remarkably due to an enhancement of the internal electric field. With increasing excitation intensity, the zero-phonon peak shows a blueshift and the Huang-Rhys factor decreases. These results reveal that there is a large built-in electric field in the well layer and the exciton-LO-phonon coupling is strongly affected by the thickness of the cap layer.展开更多
The effects of gravity,capillary force,and viscous force on the migration characteristics of oil and gas interface in oxygen-reduced air-assisted gravity drainage(OAGD)were studied through a two-dimensional visualizat...The effects of gravity,capillary force,and viscous force on the migration characteristics of oil and gas interface in oxygen-reduced air-assisted gravity drainage(OAGD)were studied through a two-dimensional visualization model.The effects of bond number,capillary number and low-temperature oxidation on OAGD recovery were studied by long core displacement experiments.On this basis,the low-temperature oxidation number was introduced and its relationship with the OAGD recovery was established.The results show that the shape and changing law of oil and gas front are mainly influenced by gravity,capillary force and viscous force.When the bond number is constant(4.52×10-4),the shape of oil-gas front is controlled by capillary number.When the capillary number is less than 1.68×10-3,the oil and gas interface is stable.When the capillary number is greater than 2.69×10-2,the oil and gas interface shows viscous fingering.When the capillary number is between 1.68×10-3 and 2.69×10-2,the oil and gas interface becomes capillary fingering.The core flooding experiments results show that for OAGD stable flooding,before the gas breakthrough,higher recovery is obtained in higher gravity number and lower capillary number.In this stage,gravity is predominant in controlling OAGD recovery and the oil recovery could be improved by reducing injection velocity.After gas breakthrough,higher recovery was obtained in lower gravity and higher capillary numbers,which means that the viscous force had a significant influence on the recovery.Increasing gas injection velocity in this stage is an effective measure to improve oil recovery.The low-temperature oxidation number has a good correlation with the recovery and can be used to predict the OAGD recovery.展开更多
Objective To investigate the patients experience in community health centers( CHCs) and explore its associated factors. Methods A cross-sectional study was conducted among 330 patients who visited CHCs in Shenzhen,Chi...Objective To investigate the patients experience in community health centers( CHCs) and explore its associated factors. Methods A cross-sectional study was conducted among 330 patients who visited CHCs in Shenzhen,China from January to March 2018. Dependent variable was patient experience. Key descriptive variables were age,gender,marital status,working status groups,visits frequency for the past 6 months,whether patients had signed a family doctor,whether trusted in family doctor,whether had chronic diseases. Results Questionnaires for 300 patients were assessed. In the univariate analysis,patients experience total score was significantly associated with marital status( P < 0. 1),working status groups( P < 0. 1),frequency of visit for the past 6 months( P < 0. 05),whether had signed a family doctor( P < 0. 05),whether trusted in family doctor( P < 0. 05),whether had chronic diseases( P < 0. 05). The multivariate analysis showed that unmarried patients( P = 0. 011,OR = 2. 96,95% CI: 1. 24-5. 43) and had signed a family doctor( P = 0. 023,OR = 0. 44,95% CI: 0. 22-0. 85) were more likely to get a higher score. Conclusions Findings of this study showed a medium-level score of patients experience in the community. Patients had a quite good experience and more interventions should be focused upon the influence factors to improve patients experience.展开更多
A single-stage single-switch high- frequency electronic ballast topology is presented. The circuit topology is the integration of a buck power- factor-correction （PFC） converter and a class E resonant inverter with ...A single-stage single-switch high- frequency electronic ballast topology is presented. The circuit topology is the integration of a buck power- factor-correction （PFC） converter and a class E resonant inverter with only one active power switch. The buck converter is operated in discontinuous conduction mode and at a fixed switching frequency, and constant duty cycle to achieve high power factor and it can be controlled easily. Detailed analysis of the operation and characteristics of the circuit is provided. Simulation results satisfy present standard requirements.展开更多
The notched and smooth specimens of aluminum alloy LC4CS soaked in EXCO solution for different time are tested under the constant amplitude cyclic loading to obtain S-N curves and fatigue notch factors with different ...The notched and smooth specimens of aluminum alloy LC4CS soaked in EXCO solution for different time are tested under the constant amplitude cyclic loading to obtain S-N curves and fatigue notch factors with different pre-corrosion time. By analyzing the corrosion process of LC4CS specimens in EXCO solution, the influ- ence mechanism of corrosion on fatigue notch factor is expounded. Then, a two-parameter model used to describe the change of corrosion fatigue notch factor with time is established and verified by experiment. The results show that the pre-corrosion fatigue notch factor of LC4CS material decreases at first and then increases with the increasing pre-corrosion time. The inflection point appears at the beginning of denudation stage.展开更多
基金support from the Innovative Research Groups of the National Natural Science Foundation of China (No.50921002)the National Natural Science Foundation of China (Nos.50574091 and 50774084)+1 种基金the "333 Project" Foundation of Jiangsu Provincethe Key Laboratory of Coal Processing & Efficient Utilization,Ministry of Education Foundation (No.CPEUKF 08-02) for this work
文摘A virtual sieving experimental simulation system was built using physical simulation principles.The effects of vibration frequency and amplitude,the inclination angle of the screen-deck and the vibration direction angle of screen on single particle kinematics were predicted.Properties such as the average velocity and the average throw height were studied.The results show that the amplitude and the angle of vibration have a great effect on particle average velocity and average height.The vibration frequency and the screen-deck inclination angle appear to have little influence on these responses.For materials that are difficult to screen the vibration frequency and amplitude,the screen-deck inclination angle and the vibration angle should be set to 14 Hz,6.6 mm,6° and 40°,respectively,to obtain optimal particle kinematics.A screening process can be simulated reliably by means of a virtual experiment and these results provide references for both screening theory research and sieving practice.
文摘In order to improve the quality of laneways and tunnel excavation by drilling and blasting and by making effective use of explosive energy, a model experiment of rock blasting with a single borehole and a double free-surface was performed with the objective of studying the effect of parameters such as charge structure, free-surface and rock compressive strength on rock blasting.The model experiments indicate that:1) the smaller the rock compressive strength and density, the more distinctive the cavity expanding action by blasting;2) the powder factor in an air-decoupling charge structure is larger than that in a coupling charge structure, i.e., the explosive energy in an air-decoupling charge structure transferred to the rocks is less than that in a coupling charge structure;3) a free-surface improves the utilizations of explosive energy;4) an air-decoupling charge structure helps to maintain the integrity and stability of wall rock in controlled perimeter blasting, such as in roadways and tunnel excavation by drilling and blasting.
基金supported by the National Natural Science Foundation of China(Grant No.61274106)
文摘In this paper the single-event responses of the silicon germanium heterojunction bipolar transistors(SiGe HBTs) are investigated by TCAD simulations and laser microbeam experiment. A three-dimensional(3D) simulation model is established, the single event effect(SEE) simulation is further carried out on the basis of Si Ge HBT devices, and then, together with the laser microbeam test, the charge collection behaviors are analyzed, including the single event transient(SET) induced transient terminal currents, and the sensitive area of SEE charge collection. The simulations and experimental results are discussed in detail and it is demonstrated that the nature of the current transient is controlled by the behaviors of the collector–substrate(C/S) junction and charge collection by sensitive electrodes, thereby giving out the sensitive area and electrode of SiGe HBT in SEE.
基金the National Natural Science Foundation of China(Nos.11079045,11179003 and 11305233)
文摘With extensive use of flash-based field-programmable gate arrays(FPGAs) in military and aerospace applications, single-event effects(SEEs) of FPGAs induced by radiations have been a major concern. In this paper, we present SEE experimental study of a flash-based FPGA from Microsemi Pro ASIC3 product family. The relation between the cross section and different linear energy transfer(LET) values for the logic tiles and embedded RAM blocks is obtained. The results show that the sequential logic cross section depends not too much on operating frequency of the device. And the relationship between 0 →1 upsets(zeros) and 1 →0 upsets(ones) is different for different kinds of D-flip-flops. The devices are not sensitive to SEL up to a LET of 99.0 Me V cm2/mg.Post-beam tests show that the programming module is damaged due to the high-LET ions.
基金supported by the National Natural Science Foundation of China(Grant No.61376109)
文摘The contribution of parasitic bipolar amplification to SETs is experimentally verified using two P-hit target chains in the normal layout and in the special layout. For PMOSs in the normal layout, the single-event charge collection is composed of diffusion, drift, and the parasitic bipolar effect, while for PMOSs in the special layout, the parasitic bipolar junction transistor cannot turn on. Heavy ion experimental results show that PMOSs without parasitic bipolar amplification have a 21.4% decrease in the average SET pulse width and roughly a 40.2% reduction in the SET cross-section.
基金partially supported by the National Key Research and Development Program of China(No.2018YFC0309200)the National Natural Science Foundation of China(No.51879036)+1 种基金the LiaoNing Revitalization Talents Program(No.XLYC2002036)the Fundamental Research Funds for the Central Universities of Dalian University of Technology。
文摘Rapid advances in deep-sea mining engineering have created an urgent need for the accurate evaluation of the undrained strength of marine soils,especially surface soils.Significant achievements have been made using full-flow penetration penetrometers to evaluate marine soil strength in the deep penetration;however,a method considering the effect of ambient water on the surface penetration needs to be established urgently.In this study,penetrometers with multiple probes were developed and used to conduct centrifuge experiments on South China Sea soil and kaolin clay.First,the forces on the probes throughout the penetration process were systematically analyzed and quantified.Second,the spatial influence zone was determined by capturing the resistance changes and sample crack development,and the penetration depth for a sample to reach a stable failure mode was given.Third,the vane shear strength was used to invert the penetration resistance factor of the ball and determine the range of the penetration resistance factor values.Furthermore,a methodology to determine the penetration resistance factors for surface marine soils was established.Finally,the effect of the water cavity above various probes in the surface penetration was used to formulate an internal mechanism for variations in the penetration resistance factor.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 60876007 and 10974165)the Research Program of Xiamen Municipal Science and Technology Bureau,China (Grant No. 2006AA03Z110)
文摘This paper studies the exciton-longitudinal-optical-phonon coupling in InGaN/GaN single quantum wells with various cap layer thicknesses by low temperature photoluminescence （PL） measurements. With increasing cap layer thickness, the PL peak energy shifts to lower energy and the coupling strength between the exciton and longitudinal- optical （LO） phonon, described by Huang-Rhys factor, increases remarkably due to an enhancement of the internal electric field. With increasing excitation intensity, the zero-phonon peak shows a blueshift and the Huang-Rhys factor decreases. These results reveal that there is a large built-in electric field in the well layer and the exciton-LO-phonon coupling is strongly affected by the thickness of the cap layer.
基金Supported by the National Science and Technology Major Project(ZX20170054)
文摘The effects of gravity,capillary force,and viscous force on the migration characteristics of oil and gas interface in oxygen-reduced air-assisted gravity drainage(OAGD)were studied through a two-dimensional visualization model.The effects of bond number,capillary number and low-temperature oxidation on OAGD recovery were studied by long core displacement experiments.On this basis,the low-temperature oxidation number was introduced and its relationship with the OAGD recovery was established.The results show that the shape and changing law of oil and gas front are mainly influenced by gravity,capillary force and viscous force.When the bond number is constant(4.52×10-4),the shape of oil-gas front is controlled by capillary number.When the capillary number is less than 1.68×10-3,the oil and gas interface is stable.When the capillary number is greater than 2.69×10-2,the oil and gas interface shows viscous fingering.When the capillary number is between 1.68×10-3 and 2.69×10-2,the oil and gas interface becomes capillary fingering.The core flooding experiments results show that for OAGD stable flooding,before the gas breakthrough,higher recovery is obtained in higher gravity number and lower capillary number.In this stage,gravity is predominant in controlling OAGD recovery and the oil recovery could be improved by reducing injection velocity.After gas breakthrough,higher recovery was obtained in lower gravity and higher capillary numbers,which means that the viscous force had a significant influence on the recovery.Increasing gas injection velocity in this stage is an effective measure to improve oil recovery.The low-temperature oxidation number has a good correlation with the recovery and can be used to predict the OAGD recovery.
基金The Guangdong Medical Scientific Research Fund(A2017375)Pingshan District Research Project(201710)
文摘Objective To investigate the patients experience in community health centers( CHCs) and explore its associated factors. Methods A cross-sectional study was conducted among 330 patients who visited CHCs in Shenzhen,China from January to March 2018. Dependent variable was patient experience. Key descriptive variables were age,gender,marital status,working status groups,visits frequency for the past 6 months,whether patients had signed a family doctor,whether trusted in family doctor,whether had chronic diseases. Results Questionnaires for 300 patients were assessed. In the univariate analysis,patients experience total score was significantly associated with marital status( P < 0. 1),working status groups( P < 0. 1),frequency of visit for the past 6 months( P < 0. 05),whether had signed a family doctor( P < 0. 05),whether trusted in family doctor( P < 0. 05),whether had chronic diseases( P < 0. 05). The multivariate analysis showed that unmarried patients( P = 0. 011,OR = 2. 96,95% CI: 1. 24-5. 43) and had signed a family doctor( P = 0. 023,OR = 0. 44,95% CI: 0. 22-0. 85) were more likely to get a higher score. Conclusions Findings of this study showed a medium-level score of patients experience in the community. Patients had a quite good experience and more interventions should be focused upon the influence factors to improve patients experience.
文摘A single-stage single-switch high- frequency electronic ballast topology is presented. The circuit topology is the integration of a buck power- factor-correction （PFC） converter and a class E resonant inverter with only one active power switch. The buck converter is operated in discontinuous conduction mode and at a fixed switching frequency, and constant duty cycle to achieve high power factor and it can be controlled easily. Detailed analysis of the operation and characteristics of the circuit is provided. Simulation results satisfy present standard requirements.
基金Supported by the Program for Changjiang Scholars and Innovative Research Team of Ministry of Education(Irt0906)~~
文摘The notched and smooth specimens of aluminum alloy LC4CS soaked in EXCO solution for different time are tested under the constant amplitude cyclic loading to obtain S-N curves and fatigue notch factors with different pre-corrosion time. By analyzing the corrosion process of LC4CS specimens in EXCO solution, the influ- ence mechanism of corrosion on fatigue notch factor is expounded. Then, a two-parameter model used to describe the change of corrosion fatigue notch factor with time is established and verified by experiment. The results show that the pre-corrosion fatigue notch factor of LC4CS material decreases at first and then increases with the increasing pre-corrosion time. The inflection point appears at the beginning of denudation stage.
