Perovskite quantum dot light-emitting diodes(Pe-QLEDs)have shown immense application potential in display and lighting fields due to their narrow full-width at half maximum(FWHM)and high photoluminescence quantum yiel...Perovskite quantum dot light-emitting diodes(Pe-QLEDs)have shown immense application potential in display and lighting fields due to their narrow full-width at half maximum(FWHM)and high photoluminescence quantum yield(PLQY).Despite significant advancements in their performance,challenges such as defects and ion migration still hinder their long-term stability and operational efficiency.To address these issues,various optimization strategies,including ligand engineering,interface passivation,and self-assembly strategy,are being actively researched.This review focuses on the synthesis methods,challenges and optimization of perovskite quantum dots,which are critical for the commercialization and large-scale production of high-performance and stable Pe-QLEDs.展开更多
Colloidal quantum dots(CQDs)are affected by the quantum confinement effect,which makes their bandgap tunable.This characteristic allows these materials to cover a broader infrared spectrum,providing a costeffective al...Colloidal quantum dots(CQDs)are affected by the quantum confinement effect,which makes their bandgap tunable.This characteristic allows these materials to cover a broader infrared spectrum,providing a costeffective alternative to traditional infrared detector technology.Recently,thanks to the solution processing properties of quantum dots and their ability to integrate with silicon-based readout circuits on a single chip,infrared detectors based on HgTe CQDs have shown great application prospects.However,facing the challenges of vertically stacked photovoltaic devices,such as barrier layer matching and film non-uniformity,most devices integrated with readout circuits still use a planar structure,which limits the efficiency of light absorption and the effective separation and collection of photo-generated carriers.Here,by synthesizing high-quality HgTe CQDs and precisely controlling the interface quality,we have successfully fabricated a photovoltaic detector based on HgTe and ZnO QDs.At a working temperature of 80 K,this detector achieved a low dark current of 5.23×10^(-9)A cm^(-2),a high rectification ratio,and satisfactory detection sensitivity.This work paves a new way for the vertical integration of HgTe CQDs on silicon-based readout circuits,demonstrating their great potential in the field of high-performance infrared detection.展开更多
As an essential candidate for environment-friendly luminescent quantum dots(QDs),CuInS-based QDs have attracted more attention in recent years.However,several drawbacks still hamper their industrial applications,such ...As an essential candidate for environment-friendly luminescent quantum dots(QDs),CuInS-based QDs have attracted more attention in recent years.However,several drawbacks still hamper their industrial applications,such as lower photoluminescence quantum yield(PLQY),complex synthetic pathways,uncontrollable emission spectra,and insufficient photostability.In this study,CuInZnS@ZnS core/shell QDs was prepared via a one-pot/three-step synthetic scheme with accurate and tunable control of PL spectra.Then their ensemble spectroscopic properties during nucleation formation,alloying,and ZnS shell growth processes were systematically investigated.PL peaks of these QDs can be precisely manipulated from 530 to 850 nm by controlling the stoichiometric ratio of Cu/In,Zn^(2+)doping and ZnS shell growth.In particular,CuInZnS@ZnS QDs possess a significantly long emission lifetime(up to 750 ns),high PLQY(up to 85%),and excellent crystallinity.Their spectroscopic evolution is well validated by Cu-deficient related intragap emission model.By controlling the stoichiometric ratio of Cu/In,two distinct Cu-deficient related emission pathways are established based on the differing oxidation states of Cu defects.Therefore,this work provides deeper insights for fabricating high luminescent ternary or quaternary-alloyed QDs.展开更多
Calcium ions(Ca^(2+))and manganese ions(Mn^(2+))are essential for sustaining life activities and are key monitoring indicators in drinking water.Developing highly sensitive,selective,and portable detection methods for...Calcium ions(Ca^(2+))and manganese ions(Mn^(2+))are essential for sustaining life activities and are key monitoring indicators in drinking water.Developing highly sensitive,selective,and portable detection methods for Ca^(2+)and Mn^(2+)is significant for water quality monitoring and human health.In this paper,blue fluorescent Ti3C2 MXene-based quantum dots(MQDs,λ_(em)=445 nm)are prepared using Ti_(3)C_(2)MXene as the precursor.Through the chelation effect of ethylene diamine tetraacetic acid(EDTA),a blue and red dual-emission fluorescent probe,MQDs-EDTA-Eu^(3+)-DPA,was constructed.Herein,dipicolinic acid(DPA)acts as an absorbing ligand and significantly enhances the red fluorescence of europium ions(Eu^(3+))at 616 nm through the“antenna effect”.The blue fluorescence of MQDs serves as an internal reference signal.High concentrations of Ca^(2+)can quench the red fluorescence of Eu^(3+)-DPA;Mn^(2+)can be excited to emit purple fluorescence at 380 nm after coordinating with DPA,red fluorescence of Eu^(3+)-DPA serves as the internal reference signal.Based on the above two fluorescence intensity changes,ratiometric fluorescence detection methods for Ca^(2+)and Mn^(2+)are established.The fluorescence intensity ratio(IF_(616)/IF_(445))exhibits a linear relationship with Ca^(2+)in the range of 35-120μmol/L,with a detection limit of 5.98μmol/L.The fluorescence intensity ratio(IF_(380)/IF_(616))shows good linearity with Mn^(2+)in the range of 0-14μmol/L,with a detection limit of 28.6 nmol/L.This method was successfully applied to the quantitative analysis of Ca^(2+)and Mn^(2+)in commercially available mineral water(Nongfu Spring,Ganten,and Evergrande),with recovery rates of 80.6%-117%and relative standard deviations(RSD)of 0.76%-4.6%.Additionally,by preparing MQD-based fluorescent test strips,visual detections of Ca^(2+)and Mn^(2+)are achieved.This work demonstrates the application potential of MQDs in the field of visual fluorescence sensing of ions in water quality.展开更多
The performance of the photodetector is significantly impacted by the inherent surface faults in GaAs nanowires(NWs).We combined three-dimensional(3D)gallium arsenide nanowires with zero-dimensional(0D)WS_(2) quantum ...The performance of the photodetector is significantly impacted by the inherent surface faults in GaAs nanowires(NWs).We combined three-dimensional(3D)gallium arsenide nanowires with zero-dimensional(0D)WS_(2) quantum dot(QDs)materials in a simple and convenient way to form a heterogeneous structure.Various performance enhancements have been realized through the formation of typeⅡenergy bands in heterostructures,opening up new research directions for the future development of photodetector devices.This work successfully fabricated a high-sensitivity photodetector based on WS_(2)QDs/GaAs NWs heterostructure.Under 660 nm laser excitation,the photodetector exhibits a responsivity of 368.07 A/W,a detectivity of 2.7×10^(12)Jones,an external quantum efficiency of 6.47×10^(2)%,a low-noise equivalent power of 2.27×10^(-17)W·Hz^(-1/2),a response time of 0.3 s,and a recovery time of 2.12 s.This study provides a new solution for the preparation of high-performance GaAs detectors and promotes the development of optoelectronic devices for GaAs NWs.展开更多
Using simple and eco-friendly ethanol solvothermal treatment,dual-emission biomass carbon quantum dots(D-BCQDs)were synthesized from biomass viburnum awabuki leaves.Under excitation with 413 nm wavelength light two em...Using simple and eco-friendly ethanol solvothermal treatment,dual-emission biomass carbon quantum dots(D-BCQDs)were synthesized from biomass viburnum awabuki leaves.Under excitation with 413 nm wavelength light two emission peaks appeared at 490 and 675 nm and the dots could be tuned to emit crimson,red,purplish red,purple and blue-gray fluorescence by changing the solvothermal temperature from 140℃ to 160,180,200 and 240℃,respectively.XPS and FTIR characterization in-dicated that the fluorescence color was mainly determined by surface oxidation defects,elemental nitrogen and sp^(2)-C/sp^(3)-C hybrid-ized structural domains.The D-BCQDs could not only detect Fe^(3+)or Cu^(2+),but also quantify the concentration ratio of Fe^(3+)to Cu^(2+)in a solution containing both,demonstrating their potential applications in the simultaneous detection of Fe^(3+)and Cu^(2+)ions.展开更多
Carbon quantum dots(CQDs),which contain a core structure composed of sp^(2)carbon,can be used as the reinforcing phase like graphene and carbon nanotubes in metal matrix.In this paper,the CQD/Cu composite material was...Carbon quantum dots(CQDs),which contain a core structure composed of sp^(2)carbon,can be used as the reinforcing phase like graphene and carbon nanotubes in metal matrix.In this paper,the CQD/Cu composite material was prepared by powder metallurgy method.The composite powder was prepared by molecular blending method and ball milling method at first,and then densified into bulk material by spark plasma sintering(SPS).X-ray diffraction,Raman spectroscopy,infrared spectroscopy,and nuclear magnetic resonance were employed to characterize the CQD synthesized under different temperature conditions,and then CQDs with a higher degree of sp^(2)were utilized as the reinforcement to prepare composite materials with different contents.Mechanical properties and electrical conductivity results show that the tensile strength of the 0.2 CQD/Cu composite material is~31%higher than that of the pure copper sample,and the conductivity of 0.4 CQD/Cu is~96%IACS,which is as high as pure copper.TEM and HRTEM results show that good interface bonding of CQD and copper grain is the key to maintaining high mechanical and electrical conductivity.This research provides an important foundation and direction for new carbon materials reinforced metal matrix composites.展开更多
A rapid, ultrasensitive and convenient fluorescence measurement technology based on the enhancement of the fluorescence intensity resulting from the interaction of functionalized CdSe/CdS quantum dots （QDs） with bov...A rapid, ultrasensitive and convenient fluorescence measurement technology based on the enhancement of the fluorescence intensity resulting from the interaction of functionalized CdSe/CdS quantum dots （QDs） with bov/ne serum albumin （BSA） was proposed. The citrate-stabilized CdSe/CdS （QDs） were synthesized by using Se powder and Na2S as precursors instead of any pyrophoric organometallic precursors. The modified CdSe/CdS QDs are brighter and more stable against photobleaching in comparison with organic fluorophores. At pH 7.0, the fluorescence signal of CdSe/CdS is enhanced by increasing the concentration of BSA in the range of 0.1-10 μg/mL, and the low detection limit is 0.06 μg/mL. A linear relationship between the enhanced fluorescence peak intensity （△F） and BSA concentration （c） is established using equation △F=50.7c＋16.4 （R=0.996 36）. Results of determination for BSA in three synthetic samples are identical with the true values, and the recovery （98.9%-102.4%） and relative standard deviation （RSD, 1.8%-2.5%） are satisfactory.展开更多
In order to further improve the driving performance of ionic polymer metal composites(IPMCs),Nafion/graphene quantum dots(GQDs)hybrid membranes incorporating GQDs with various contents of 0,0.1 wt.%,0.5 wt.%,1.0 wt.%,...In order to further improve the driving performance of ionic polymer metal composites(IPMCs),Nafion/graphene quantum dots(GQDs)hybrid membranes incorporating GQDs with various contents of 0,0.1 wt.%,0.5 wt.%,1.0 wt.%,2.0 wt.%and 4.0 wt.%were fabricated by solution casting,and then IPMCs were manufactured by electroless plating.The water contents and elastic moduli of the hybrid membranes were tested.The morphology characteristics of the hybrid membranes and the IPMCs were observed,and the current,AC impedance,blocking force and displacement of the IPMCs were measured.The results show that the elastic modulus of the hybrid membranes decreases,the water content increases,and the actuation performance of the IPMCs improves significantly after the addition of GQDs.IPMC with 1.0 wt.%GQDs exhibits the best driving property.Compared with the IPMC without GQDs,the working current,ion conductivity,blocking force,and tip displacement increase by 94.67%,311.11%,53.66%,and 66.07%,respectively.These results lay a solid foundation for the preparation of IPMCs with high performance,and further broaden their applications in biomedical devices and bionic robots.展开更多
Effects of a charged impurity on the ground state of two vertically coupled identical single-electron quantum dots with and without applied magnetic field are investigated. In the absence of the magnetic field, the in...Effects of a charged impurity on the ground state of two vertically coupled identical single-electron quantum dots with and without applied magnetic field are investigated. In the absence of the magnetic field, the investigations of the charged impurity effect on the quantum entanglement (QE) in some low-lying states are carried out. It is found that, both the positive charged impurity (PCI) and the negative charged impurity (NCI) reduce the QE in the low-lying states under consideration except that the QE in the ground state is enhanced by the NCI. Additionally, in the domain of B from 0 Tesla to 15 Tesla, the ground state energy E, the ground state angular momentum L and the ground state QE entropy S are worked out. As far as the ground state are concerned, the PCI (NCI) blocks (induces) the angular momentum phase transition and the QE phase transition besides the known fact (i.e., the PCI/NCI decreases/increases the energy) in the magnetic field.展开更多
The influence of stabilizing agents and reaction time on the luminescent properties of water-soluble CdTe quantum dots(QDs) was discussed.The thioglycolic acid(TGA)-CdTe ODs were characterized by TEM,XRD and FTIR.It i...The influence of stabilizing agents and reaction time on the luminescent properties of water-soluble CdTe quantum dots(QDs) was discussed.The thioglycolic acid(TGA)-CdTe ODs were characterized by TEM,XRD and FTIR.It is found that larger-size QDs can be synthesized more easily when L-cysteine(Cys) or golutathione(GSH) is chosen as stabilizing agent and TGA is proper to prepare highly luminescent QDs because of the effect between Cd2+ and sulfhydryl group.Furthermore,the absorption wavelength,full width at half maximum(FWHM),stokes shift,photoluminescence(PL) quantum yield and PL stability of TGA-CdTe are strongly dependent on reaction time,in which the absorption wavelength changes against reaction time with an exponential function.The TGA-CdTe QDs prepared at 2 h possess more excellent luminescent properties.展开更多
A rapid and sensitive fluorometric method for the enzymatic detection of ethanol using CdSe/ZnS quantum dots （QDs） is proposed. The photoluminescence of QDs is sensitive to H202. This finding leads to a novel approa...A rapid and sensitive fluorometric method for the enzymatic detection of ethanol using CdSe/ZnS quantum dots （QDs） is proposed. The photoluminescence of QDs is sensitive to H202. This finding leads to a novel approach for the determination of ethanol using alcohol oxidase （AOx） which, on oxidation of ethanol, produces H202. The method has higher sensitivity, wider analytical range （0.1-8 mmol/L）, and a lower detection limit （0.05 mmol/L）. The relationship between quenching of the photoluminescence of the QDs and the concentration of ethanol is linear.展开更多
Local structure of uncapped and Si capped Ge quantum dots grown on Si(100) has been probed by X ray absorption fine structure spectroscopy. It is found that the uncapped Ge dots are partially oxidized and partially al...Local structure of uncapped and Si capped Ge quantum dots grown on Si(100) has been probed by X ray absorption fine structure spectroscopy. It is found that the uncapped Ge dots are partially oxidized and partially alloyed with Si. The amount of Ge present in the Ge phase is found to be about 20 30%. In the Si capped sample, Ge is found to be dissolved in silicon, the fraction of Ge atoms existing as pure Ge phase being not more than 10%.展开更多
Compared to conventional quantum dot light-emitting diodes,tandem quantum dot light-emitting diodes(TQLEDs)possess higher device efficiency and more applications in the field of flat panel display and solid-state ligh...Compared to conventional quantum dot light-emitting diodes,tandem quantum dot light-emitting diodes(TQLEDs)possess higher device efficiency and more applications in the field of flat panel display and solid-state lighting in the future.The TQLED is a multilayer structure device which connects two or more light-emitting units by using an interconnection layer(ICL),which plays an extremely important role in the TQLED.Therefore,realizing an effective ICL is the key to obtain high-efficiency TQLEDs.In this work,the p-type materials polys(3,4-ethylenedioxythiophene),poly(styrenesulfonate)(PEDOT:PSS)and the n-type material zinc magnesium oxide(ZnMgO),were used,and an effective hybrid ICL,the PEDOT:PSS-GO/ZnMgO,was obtained by doping graphene oxide(GO)into PEDOT:PSS.The effect of GO additive on the ICL was systematically investigated.It exhibits that the GO additive brought the fine charge carrier generation and injection capacity simultaneously.Thus,the all solutionprocessed red TQLEDs were prepared and characterized for the first time.The maximum luminance of 40877 cd/m^(2) and the highest current efficiency of 19.6 cd/A were achieved,respectively,showing a 21%growth and a 51%increase when compared with those of the reference device without GO.The encouraging results suggest that our investigation paves the way for efficient all solution-processed TQLEDs.展开更多
The electric characteristics of Ge quantum dot grown by molecular beam epitaxy in Si matrix were investigated by admittance spectroscopy and deep level transient spectroscopy. The admittance spectroscopy measurements ...The electric characteristics of Ge quantum dot grown by molecular beam epitaxy in Si matrix were investigated by admittance spectroscopy and deep level transient spectroscopy. The admittance spectroscopy measurements show that the activation energy of 0.341eV can be considered as the emitting energy of hole from the ground state of the quantum dot. And the capacitance variation with temperature of the sample shows a platform at various frequencies with reverse bias (0.5 V,) which indicates that the boundary of space charge region is located at the quantum dot layer where the large confined hole concentration blocks the further extension of space charge region. When the temperature increases from 120K to 200K, the holes in the dot emit out completely. The position of the platform shifting with the increase of the applied frequency shows the frequency effects of the charges in the quantum dot. The deep level transient spectroscopy results show that the charge concentration in the Ge quantum dot is a function of the pulse duration and the reverse bias voltage, the activation energy and capture cross-section of hole decrease with the increase of pulse duration due to the Coulomb charging effect. The valence-band offsets of hole in Ge dot obtained by admittance spectroscopy and deep level transient spectroscopy are 0.341 and 0.338eV, respectively.展开更多
文摘Perovskite quantum dot light-emitting diodes(Pe-QLEDs)have shown immense application potential in display and lighting fields due to their narrow full-width at half maximum(FWHM)and high photoluminescence quantum yield(PLQY).Despite significant advancements in their performance,challenges such as defects and ion migration still hinder their long-term stability and operational efficiency.To address these issues,various optimization strategies,including ligand engineering,interface passivation,and self-assembly strategy,are being actively researched.This review focuses on the synthesis methods,challenges and optimization of perovskite quantum dots,which are critical for the commercialization and large-scale production of high-performance and stable Pe-QLEDs.
基金Supported by National Key Research and Development Program in the 14th five year plan(2021YFA1200700)Strategic Priority Re⁃search Program of the Chinese Academy of Sciences(XDB0580000)Natural Science Foundation of China(62025405,62104235,62105348).
文摘Colloidal quantum dots(CQDs)are affected by the quantum confinement effect,which makes their bandgap tunable.This characteristic allows these materials to cover a broader infrared spectrum,providing a costeffective alternative to traditional infrared detector technology.Recently,thanks to the solution processing properties of quantum dots and their ability to integrate with silicon-based readout circuits on a single chip,infrared detectors based on HgTe CQDs have shown great application prospects.However,facing the challenges of vertically stacked photovoltaic devices,such as barrier layer matching and film non-uniformity,most devices integrated with readout circuits still use a planar structure,which limits the efficiency of light absorption and the effective separation and collection of photo-generated carriers.Here,by synthesizing high-quality HgTe CQDs and precisely controlling the interface quality,we have successfully fabricated a photovoltaic detector based on HgTe and ZnO QDs.At a working temperature of 80 K,this detector achieved a low dark current of 5.23×10^(-9)A cm^(-2),a high rectification ratio,and satisfactory detection sensitivity.This work paves a new way for the vertical integration of HgTe CQDs on silicon-based readout circuits,demonstrating their great potential in the field of high-performance infrared detection.
基金Fund Project for Transformation of Scientific and Technological Achievements of Jiangsu Province of China(BA2023020)。
文摘As an essential candidate for environment-friendly luminescent quantum dots(QDs),CuInS-based QDs have attracted more attention in recent years.However,several drawbacks still hamper their industrial applications,such as lower photoluminescence quantum yield(PLQY),complex synthetic pathways,uncontrollable emission spectra,and insufficient photostability.In this study,CuInZnS@ZnS core/shell QDs was prepared via a one-pot/three-step synthetic scheme with accurate and tunable control of PL spectra.Then their ensemble spectroscopic properties during nucleation formation,alloying,and ZnS shell growth processes were systematically investigated.PL peaks of these QDs can be precisely manipulated from 530 to 850 nm by controlling the stoichiometric ratio of Cu/In,Zn^(2+)doping and ZnS shell growth.In particular,CuInZnS@ZnS QDs possess a significantly long emission lifetime(up to 750 ns),high PLQY(up to 85%),and excellent crystallinity.Their spectroscopic evolution is well validated by Cu-deficient related intragap emission model.By controlling the stoichiometric ratio of Cu/In,two distinct Cu-deficient related emission pathways are established based on the differing oxidation states of Cu defects.Therefore,this work provides deeper insights for fabricating high luminescent ternary or quaternary-alloyed QDs.
基金The Tertiary Education Scientific Research Project of the Guangzhou Municipal Education Bureau(2024312227)Innovative and Entrepreneurial Projects of Guangzhou University Students(202411078014)+2 种基金Guangzhou University Open Sharing Fund for Instruments and Equipment(2025)National Major Scientific Research Instrument Development Project(22227804)Sub-subject of the National Key Research Project(2023YFB3210100)。
文摘Calcium ions(Ca^(2+))and manganese ions(Mn^(2+))are essential for sustaining life activities and are key monitoring indicators in drinking water.Developing highly sensitive,selective,and portable detection methods for Ca^(2+)and Mn^(2+)is significant for water quality monitoring and human health.In this paper,blue fluorescent Ti3C2 MXene-based quantum dots(MQDs,λ_(em)=445 nm)are prepared using Ti_(3)C_(2)MXene as the precursor.Through the chelation effect of ethylene diamine tetraacetic acid(EDTA),a blue and red dual-emission fluorescent probe,MQDs-EDTA-Eu^(3+)-DPA,was constructed.Herein,dipicolinic acid(DPA)acts as an absorbing ligand and significantly enhances the red fluorescence of europium ions(Eu^(3+))at 616 nm through the“antenna effect”.The blue fluorescence of MQDs serves as an internal reference signal.High concentrations of Ca^(2+)can quench the red fluorescence of Eu^(3+)-DPA;Mn^(2+)can be excited to emit purple fluorescence at 380 nm after coordinating with DPA,red fluorescence of Eu^(3+)-DPA serves as the internal reference signal.Based on the above two fluorescence intensity changes,ratiometric fluorescence detection methods for Ca^(2+)and Mn^(2+)are established.The fluorescence intensity ratio(IF_(616)/IF_(445))exhibits a linear relationship with Ca^(2+)in the range of 35-120μmol/L,with a detection limit of 5.98μmol/L.The fluorescence intensity ratio(IF_(380)/IF_(616))shows good linearity with Mn^(2+)in the range of 0-14μmol/L,with a detection limit of 28.6 nmol/L.This method was successfully applied to the quantitative analysis of Ca^(2+)and Mn^(2+)in commercially available mineral water(Nongfu Spring,Ganten,and Evergrande),with recovery rates of 80.6%-117%and relative standard deviations(RSD)of 0.76%-4.6%.Additionally,by preparing MQD-based fluorescent test strips,visual detections of Ca^(2+)and Mn^(2+)are achieved.This work demonstrates the application potential of MQDs in the field of visual fluorescence sensing of ions in water quality.
文摘The performance of the photodetector is significantly impacted by the inherent surface faults in GaAs nanowires(NWs).We combined three-dimensional(3D)gallium arsenide nanowires with zero-dimensional(0D)WS_(2) quantum dot(QDs)materials in a simple and convenient way to form a heterogeneous structure.Various performance enhancements have been realized through the formation of typeⅡenergy bands in heterostructures,opening up new research directions for the future development of photodetector devices.This work successfully fabricated a high-sensitivity photodetector based on WS_(2)QDs/GaAs NWs heterostructure.Under 660 nm laser excitation,the photodetector exhibits a responsivity of 368.07 A/W,a detectivity of 2.7×10^(12)Jones,an external quantum efficiency of 6.47×10^(2)%,a low-noise equivalent power of 2.27×10^(-17)W·Hz^(-1/2),a response time of 0.3 s,and a recovery time of 2.12 s.This study provides a new solution for the preparation of high-performance GaAs detectors and promotes the development of optoelectronic devices for GaAs NWs.
文摘Using simple and eco-friendly ethanol solvothermal treatment,dual-emission biomass carbon quantum dots(D-BCQDs)were synthesized from biomass viburnum awabuki leaves.Under excitation with 413 nm wavelength light two emission peaks appeared at 490 and 675 nm and the dots could be tuned to emit crimson,red,purplish red,purple and blue-gray fluorescence by changing the solvothermal temperature from 140℃ to 160,180,200 and 240℃,respectively.XPS and FTIR characterization in-dicated that the fluorescence color was mainly determined by surface oxidation defects,elemental nitrogen and sp^(2)-C/sp^(3)-C hybrid-ized structural domains.The D-BCQDs could not only detect Fe^(3+)or Cu^(2+),but also quantify the concentration ratio of Fe^(3+)to Cu^(2+)in a solution containing both,demonstrating their potential applications in the simultaneous detection of Fe^(3+)and Cu^(2+)ions.
基金Project(52064032)supported by the National Natural Science Foundation of ChinaProjects(2019ZE001,202002AB080001)supported by the Yunnan Science and Technology Projects,ChinaProject(YNWR-QNBJ-2018-005)supported by the Yunnan Ten Thousand Talents Plan Young&Elite Talents,China。
文摘Carbon quantum dots(CQDs),which contain a core structure composed of sp^(2)carbon,can be used as the reinforcing phase like graphene and carbon nanotubes in metal matrix.In this paper,the CQD/Cu composite material was prepared by powder metallurgy method.The composite powder was prepared by molecular blending method and ball milling method at first,and then densified into bulk material by spark plasma sintering(SPS).X-ray diffraction,Raman spectroscopy,infrared spectroscopy,and nuclear magnetic resonance were employed to characterize the CQD synthesized under different temperature conditions,and then CQDs with a higher degree of sp^(2)were utilized as the reinforcement to prepare composite materials with different contents.Mechanical properties and electrical conductivity results show that the tensile strength of the 0.2 CQD/Cu composite material is~31%higher than that of the pure copper sample,and the conductivity of 0.4 CQD/Cu is~96%IACS,which is as high as pure copper.TEM and HRTEM results show that good interface bonding of CQD and copper grain is the key to maintaining high mechanical and electrical conductivity.This research provides an important foundation and direction for new carbon materials reinforced metal matrix composites.
基金Project(50772133) supported by the National Natural Science Foundation of China
文摘A rapid, ultrasensitive and convenient fluorescence measurement technology based on the enhancement of the fluorescence intensity resulting from the interaction of functionalized CdSe/CdS quantum dots （QDs） with bov/ne serum albumin （BSA） was proposed. The citrate-stabilized CdSe/CdS （QDs） were synthesized by using Se powder and Na2S as precursors instead of any pyrophoric organometallic precursors. The modified CdSe/CdS QDs are brighter and more stable against photobleaching in comparison with organic fluorophores. At pH 7.0, the fluorescence signal of CdSe/CdS is enhanced by increasing the concentration of BSA in the range of 0.1-10 μg/mL, and the low detection limit is 0.06 μg/mL. A linear relationship between the enhanced fluorescence peak intensity （△F） and BSA concentration （c） is established using equation △F=50.7c＋16.4 （R=0.996 36）. Results of determination for BSA in three synthetic samples are identical with the true values, and the recovery （98.9%-102.4%） and relative standard deviation （RSD, 1.8%-2.5%） are satisfactory.
基金Projects(51605220,U1637101)supported by the National Natural Science Foundation of ChinaProject(BK20160793)supported by the Jiangsu Provincial Natural Science Foundation,ChinaProject(NS2020029)supported by the Fundamental Research Funds for the Central Universities,China。
文摘In order to further improve the driving performance of ionic polymer metal composites(IPMCs),Nafion/graphene quantum dots(GQDs)hybrid membranes incorporating GQDs with various contents of 0,0.1 wt.%,0.5 wt.%,1.0 wt.%,2.0 wt.%and 4.0 wt.%were fabricated by solution casting,and then IPMCs were manufactured by electroless plating.The water contents and elastic moduli of the hybrid membranes were tested.The morphology characteristics of the hybrid membranes and the IPMCs were observed,and the current,AC impedance,blocking force and displacement of the IPMCs were measured.The results show that the elastic modulus of the hybrid membranes decreases,the water content increases,and the actuation performance of the IPMCs improves significantly after the addition of GQDs.IPMC with 1.0 wt.%GQDs exhibits the best driving property.Compared with the IPMC without GQDs,the working current,ion conductivity,blocking force,and tip displacement increase by 94.67%,311.11%,53.66%,and 66.07%,respectively.These results lay a solid foundation for the preparation of IPMCs with high performance,and further broaden their applications in biomedical devices and bionic robots.
文摘Effects of a charged impurity on the ground state of two vertically coupled identical single-electron quantum dots with and without applied magnetic field are investigated. In the absence of the magnetic field, the investigations of the charged impurity effect on the quantum entanglement (QE) in some low-lying states are carried out. It is found that, both the positive charged impurity (PCI) and the negative charged impurity (NCI) reduce the QE in the low-lying states under consideration except that the QE in the ground state is enhanced by the NCI. Additionally, in the domain of B from 0 Tesla to 15 Tesla, the ground state energy E, the ground state angular momentum L and the ground state QE entropy S are worked out. As far as the ground state are concerned, the PCI (NCI) blocks (induces) the angular momentum phase transition and the QE phase transition besides the known fact (i.e., the PCI/NCI decreases/increases the energy) in the magnetic field.
基金Projects(10805069,10405034) supported by the National Natural Science Foundation of China
文摘The influence of stabilizing agents and reaction time on the luminescent properties of water-soluble CdTe quantum dots(QDs) was discussed.The thioglycolic acid(TGA)-CdTe ODs were characterized by TEM,XRD and FTIR.It is found that larger-size QDs can be synthesized more easily when L-cysteine(Cys) or golutathione(GSH) is chosen as stabilizing agent and TGA is proper to prepare highly luminescent QDs because of the effect between Cd2+ and sulfhydryl group.Furthermore,the absorption wavelength,full width at half maximum(FWHM),stokes shift,photoluminescence(PL) quantum yield and PL stability of TGA-CdTe are strongly dependent on reaction time,in which the absorption wavelength changes against reaction time with an exponential function.The TGA-CdTe QDs prepared at 2 h possess more excellent luminescent properties.
基金Project(21005067)supported by the National Natural Science Foundation of ChinaProject(11JJ4015)supported by Natural Science Foundation of Hunan Province,China
文摘A rapid and sensitive fluorometric method for the enzymatic detection of ethanol using CdSe/ZnS quantum dots （QDs） is proposed. The photoluminescence of QDs is sensitive to H202. This finding leads to a novel approach for the determination of ethanol using alcohol oxidase （AOx） which, on oxidation of ethanol, produces H202. The method has higher sensitivity, wider analytical range （0.1-8 mmol/L）, and a lower detection limit （0.05 mmol/L）. The relationship between quenching of the photoluminescence of the QDs and the concentration of ethanol is linear.
文摘Local structure of uncapped and Si capped Ge quantum dots grown on Si(100) has been probed by X ray absorption fine structure spectroscopy. It is found that the uncapped Ge dots are partially oxidized and partially alloyed with Si. The amount of Ge present in the Ge phase is found to be about 20 30%. In the Si capped sample, Ge is found to be dissolved in silicon, the fraction of Ge atoms existing as pure Ge phase being not more than 10%.
基金Project(11904298)supported by the National Natural Science Foundation of ChinaProject(cstc2020jcyj-msxm X0586)supported by Chongqing Natural Science Foundation,ChinaProject(S202010635001)supported by Chongqing Municipal Training Program of Innovation and Entrepreneurship for Undergraduates,China。
文摘Compared to conventional quantum dot light-emitting diodes,tandem quantum dot light-emitting diodes(TQLEDs)possess higher device efficiency and more applications in the field of flat panel display and solid-state lighting in the future.The TQLED is a multilayer structure device which connects two or more light-emitting units by using an interconnection layer(ICL),which plays an extremely important role in the TQLED.Therefore,realizing an effective ICL is the key to obtain high-efficiency TQLEDs.In this work,the p-type materials polys(3,4-ethylenedioxythiophene),poly(styrenesulfonate)(PEDOT:PSS)and the n-type material zinc magnesium oxide(ZnMgO),were used,and an effective hybrid ICL,the PEDOT:PSS-GO/ZnMgO,was obtained by doping graphene oxide(GO)into PEDOT:PSS.The effect of GO additive on the ICL was systematically investigated.It exhibits that the GO additive brought the fine charge carrier generation and injection capacity simultaneously.Thus,the all solutionprocessed red TQLEDs were prepared and characterized for the first time.The maximum luminance of 40877 cd/m^(2) and the highest current efficiency of 19.6 cd/A were achieved,respectively,showing a 21%growth and a 51%increase when compared with those of the reference device without GO.The encouraging results suggest that our investigation paves the way for efficient all solution-processed TQLEDs.
基金Project(60276025) supported by the National Natural Science Foundation of China
文摘The electric characteristics of Ge quantum dot grown by molecular beam epitaxy in Si matrix were investigated by admittance spectroscopy and deep level transient spectroscopy. The admittance spectroscopy measurements show that the activation energy of 0.341eV can be considered as the emitting energy of hole from the ground state of the quantum dot. And the capacitance variation with temperature of the sample shows a platform at various frequencies with reverse bias (0.5 V,) which indicates that the boundary of space charge region is located at the quantum dot layer where the large confined hole concentration blocks the further extension of space charge region. When the temperature increases from 120K to 200K, the holes in the dot emit out completely. The position of the platform shifting with the increase of the applied frequency shows the frequency effects of the charges in the quantum dot. The deep level transient spectroscopy results show that the charge concentration in the Ge quantum dot is a function of the pulse duration and the reverse bias voltage, the activation energy and capture cross-section of hole decrease with the increase of pulse duration due to the Coulomb charging effect. The valence-band offsets of hole in Ge dot obtained by admittance spectroscopy and deep level transient spectroscopy are 0.341 and 0.338eV, respectively.
