Multiattribute decision making（MADM） problems, in which the weights and ratings of alternatives are expressed with intuitionistic fuzzy（IF） sets, are investigated.Firstly, the relative degrees of membership and th...Multiattribute decision making（MADM） problems, in which the weights and ratings of alternatives are expressed with intuitionistic fuzzy（IF） sets, are investigated.Firstly, the relative degrees of membership and the relative degrees of non-membership are formulated as IF sets, the weights and values of alternatives on both qualitative and quantitative attributes may be expressed as IF sets in a unified way.Then a MADM method based on generalized ordered weighted averaging operators is proposed.The proposed method is illustrated with a numerical example.展开更多
Considering the influence of reagent adjustment in different flotation bank on the final production index and the difficulty of establishing an effective mathematical model,a coordinated optimization method for dosage...Considering the influence of reagent adjustment in different flotation bank on the final production index and the difficulty of establishing an effective mathematical model,a coordinated optimization method for dosage reagent based on key characteristics variation tendency and case-based reasoning is proposed.On the basis of the expert reagent regulation method in antimony flotation process,the reagent dosage pre-setting model of the roughing–scavenging bank is constructed based on case-based reasoning.Then,the sensitivity index is used to calculate the key features of reagent dosage.The reagent dosage compensation model is constructed based on the variation tendency of the key features in the roughing and scavenging process.At last,the prediction model is used to finish the classification and discriminant analysis.The simulation results and industrial experiment in antimony flotation process show that the proposed method reduces fluctuation of the tailings indicators and the cost of reagent dosage.It can lay a foundation for optimizing the whole process of flotation.展开更多
A construction method based on the p-plane to design high-girth quasi-cyclic low-density parity-check （QC-LDPC） codes is proposed. Firstly the good points in every line of the p-plane can be ascertained through filt...A construction method based on the p-plane to design high-girth quasi-cyclic low-density parity-check （QC-LDPC） codes is proposed. Firstly the good points in every line of the p-plane can be ascertained through filtering the bad points, because the designed parity-check matrixes using these points have the short cycles in Tanner graph of codes. Then one of the best points from the residual good points of every line in the p-plane will be found, respectively. The optimal point is also singled out according to the bit error rate （BER） performance of the QC-LDPC codes at last. Explicit necessary and sufficient conditions for the QC-LDPC codes to have no short cycles are presented which are in favor of removing the bad points in the p-plane. Since preventing the short cycles also prevents the small stopping sets, the proposed construction method also leads to QC-LDPC codes with a higher stopping distance.展开更多
The basic principles of IF/THEN rules in rough set theory are analyzed first, and then the automatic process of knowledge acquisition is given. The numerical data is qualitatively processed by the classification of me...The basic principles of IF/THEN rules in rough set theory are analyzed first, and then the automatic process of knowledge acquisition is given. The numerical data is qualitatively processed by the classification of membership functions and membership degrees to get the normative decision table. The regular method of relations and the reduction algorithm of attributes are studied. The reduced relations are presented by the multi-representvalue method and its algorithm is offered. The whole knowledge acquisition process has high degree of automation and the extracted knowledge is true and reliable.展开更多
The operation variables,including feed rate of ore slurry,caustic solution and live steams in the double-stream alumina digestion process,determine the product quality,process costs and the environment pollution.Previ...The operation variables,including feed rate of ore slurry,caustic solution and live steams in the double-stream alumina digestion process,determine the product quality,process costs and the environment pollution.Previously,they were set by the technical workers according to the offline analysis results and an empirical formula,which leads to unstable process indices and high consumption frequently.So,a multi-objective optimization model is built to maintain the balance between resource consumptions and process indices by taking technical indices and energy efficiency as objectives,where the key technical indices are predicted based on the digestion kinetics of diaspore.A multi-objective state transition algorithm(MOSTA)is improved to solve the problem,in which a self-adaptive strategy is applied to dynamically adjust the operator factors of the MOSTA and dynamic infeasible threshold is used to handle constraints to enhance searching efficiency and ability of the algorithm.Then a rule based strategy is designed to make the final decision from the Pareto frontiers.The method is integrated into an optimal control system for the industrial digestion process and tested in the actual production.Results show that the proposed method can achieve the technical target while reducing the energy consumption.展开更多
Background: In order to uncover the mechanism of significantly reduced insect resistance at the late developmental stage in cotton(Gossypium hirsutum L.),the relationship between boll setting rate under different plan...Background: In order to uncover the mechanism of significantly reduced insect resistance at the late developmental stage in cotton(Gossypium hirsutum L.),the relationship between boll setting rate under different planting densities and Bacillus thuringiensis(Bt)insecticidal concentrations in the boll wall were investigated in the present study.Two studies were arranged at Yangzhou,China during the 2017–2018 cotton growth seasons.Five planting densities(15000,25000,45000,60000 and 75000 plants per hectare)and the flower-removal treatment were imposed separately on Bt cotton cultivar Sikang3 to arrange different boll setting rates,and the boll setting rates and Bt toxin content were compared.Results: Higher boll setting rate together with lower Bt toxin contents in boll wall was observed under low planting density,whereas lower boll setting rate and higher Bt toxin contents were found under high planting density.Also,higher Bt protein concentration was associated with higher soluble protein content,glutamic-pyruvic transaminase(GPT),and glutamic oxaloacetate transaminase(GOT)activities,but lower amino acid content,and protease and peptidase activities.It was further confirmed that a higher boll setting rate with lower Bt protein content under flower-removal.Conclusions: This study demonstrated that the insecticidal efficacy of boll walls was significantly impacted by boll formation.Reduced protein synthesis and enhanced protein degradation were related to the reduced Bt toxin concentration.展开更多
In many practical applications of image segmentation problems,employing prior information can greatly improve segmentation results.This paper continues to study one kind of prior information,called prior distribution....In many practical applications of image segmentation problems,employing prior information can greatly improve segmentation results.This paper continues to study one kind of prior information,called prior distribution.Within this research,there is no exact template of the object;instead only several samples are given.The proposed method,called the parametric distribution prior model,extends our previous model by adding the training procedure to learn the prior distribution of the objects.Then this paper establishes the energy function of the active contour model(ACM)with consideration of this parametric form of prior distribution.Therefore,during the process of segmenting,the template can update itself while the contour evolves.Experiments are performed on the airplane data set.Experimental results demonstrate the potential of the proposed method that with the information of prior distribution,the segmentation effect and speed can be both improved efficaciously.展开更多
The plate tectonic model constructed by R.H. Sillitoe for the origin of porphyry copper deposits said that porphyry copper deposits were associated with convergent plate boundaries and compressional tectonic settings....The plate tectonic model constructed by R.H. Sillitoe for the origin of porphyry copper deposits said that porphyry copper deposits were associated with convergent plate boundaries and compressional tectonic settings. They were formed along destructive plate margins above subduction zones of oceanic crust. Although this model is suitable for most porphyry copper deposits because the main porphyry copper deposit belts accord with the main Mesozoic or Cenozoic plate subduction zones in space and time in the world, it is difficult to use Sillitoe’s model for explaining the formation of some intracontinental porphyry deposits such as Yulong, the largest one in East Tibet.Having no relation with a subduction zone of plates, Yulong porphyry copper deposit was formed in an intracontinental extensional tectonic setting. Qamdo block, in which Yulong lies, was a small massif in East Tibet. With its Proterozoic crystalline basement and Lower Paleozoic folded basement, Qamdo block had experienced relative stable geologic evolution and a cover more than 20000m in thickness mainly composed of clastic rock and carbonate formed from Devonian to Cretaceous. During this time, although two small oceanic basins(Jinshajiang basin and Lancangjiang basin) between which Qamdo block lay developed and subducted and relevant island arc belts occured along the east and west margins of the block, all of them were closed before Later Triassic. In Cenozoic, mainly from 52 to 35Ma, influenced by the intracontinental convergence of the three large plates(India to the southwest, Tarim to the northwest,and Yangtze to the east), Qamdo block and its surrounding areas (East Tibet) which were just to the west of Yangtze plate were in an intracontinental pull\|apart situation induced by the sinistral strike\|slip fault system while most Himalaya—Kunlun—Tibet areas between India and Tarim plates were in a compression state by the SN\|trending tectonic stress. Controlled by the regional strike\|slip fault systems, the calc\|alkaline magma deriving from the upper mantle or lower crust ascended, occurring porphyry copper mineralization in the relative uplift areas. At the same time, in the relative depression areas, also controlled by the regional deep strike\|slip faults which might cut the lithosphere, several linear or rhombic pull\|apart red molasse basins such as Gongjoe, Nangqen, parallel to the porphyry belt, were formed in this region.展开更多
Such disciplines as financial management,auditing,separated from the accounting diseipline system,have hecome anindependent professional,These two disciplines together with the original accounting diseipline,are liste...Such disciplines as financial management,auditing,separated from the accounting diseipline system,have hecome anindependent professional,These two disciplines together with the original accounting diseipline,are listed in business administration firstlevel discipline in the category of management,as the secondary discipline or professional.This paper argues that requirements are met now toset up the first level discipline of accounting professional(or class),and the three secondary discipline(or major):the accounting,financialmanagement,auditing,should be included into accounting first level discipline(or classes).Then,accounting will become first level disciplineparalleling with business administration first level.展开更多
The injection of bone cement is a promising surgical intervention for the treatment of osteoporosis.The aim of this study was to formulate a novel injectable bioactive bone cement to adress such medical problems.The b...The injection of bone cement is a promising surgical intervention for the treatment of osteoporosis.The aim of this study was to formulate a novel injectable bioactive bone cement to adress such medical problems.The bone cement primarily consists of tricalcium phosphate(β-TCP),konjac glucomannan(KGM),and hydroxyapatite whisker(HAw).An orthogonal experiment was designed to generate multiple sets of new composite calcium phosphate cement(NCPC)samples,and their setting times were measured.The in vitro compatibility of the new bone cement was assessed through relative cell proliferation rate(RGR)and in vitro cell growth experiments.Mechanical strength and porosity tests were conducted for each group of bone cement,and cross-sectional morphology was observed.The results demonstrate that the bone cement exhibits favorable properties such as self-curing,mechanical robustness,and resistance to collapse.The optimum formulation involves a doping ratio of 5/15(wt%)HAw and HA,an additional amount of 1.2wt%KGM,and a liquid citric acid concentration of 2wt%.Porosity tests confirmed that the material has high compressive strength and a favorable porosity of 27%,creating conducive conditions for cell growth,proliferation,and material degradation.Moreover,in vitro cell culture experiments revealed excellent biocompatibility of the material.Consequently,the developed NCPC emerges as a potential candidate material for applications of bone implantation.展开更多
基金supported by the National Natural Science Foundation of China (70871117 70571086)
文摘Multiattribute decision making（MADM） problems, in which the weights and ratings of alternatives are expressed with intuitionistic fuzzy（IF） sets, are investigated.Firstly, the relative degrees of membership and the relative degrees of non-membership are formulated as IF sets, the weights and values of alternatives on both qualitative and quantitative attributes may be expressed as IF sets in a unified way.Then a MADM method based on generalized ordered weighted averaging operators is proposed.The proposed method is illustrated with a numerical example.
基金Project(61725306)supported by the National Science Foundation for Distinguished Young Scholars of ChinaProjects(61473318,61403136,61703157,61751312)supported by the National Natural Science Foundation of ChinaProject(16C0940)supported by Foundation of Hunan Educational Committee,China
文摘Considering the influence of reagent adjustment in different flotation bank on the final production index and the difficulty of establishing an effective mathematical model,a coordinated optimization method for dosage reagent based on key characteristics variation tendency and case-based reasoning is proposed.On the basis of the expert reagent regulation method in antimony flotation process,the reagent dosage pre-setting model of the roughing–scavenging bank is constructed based on case-based reasoning.Then,the sensitivity index is used to calculate the key features of reagent dosage.The reagent dosage compensation model is constructed based on the variation tendency of the key features in the roughing and scavenging process.At last,the prediction model is used to finish the classification and discriminant analysis.The simulation results and industrial experiment in antimony flotation process show that the proposed method reduces fluctuation of the tailings indicators and the cost of reagent dosage.It can lay a foundation for optimizing the whole process of flotation.
基金supported by the National Natural Science Foundation of China (60572093)Specialized Research Fund for the Doctoral Program of Higher Education (20050004016)
文摘A construction method based on the p-plane to design high-girth quasi-cyclic low-density parity-check （QC-LDPC） codes is proposed. Firstly the good points in every line of the p-plane can be ascertained through filtering the bad points, because the designed parity-check matrixes using these points have the short cycles in Tanner graph of codes. Then one of the best points from the residual good points of every line in the p-plane will be found, respectively. The optimal point is also singled out according to the bit error rate （BER） performance of the QC-LDPC codes at last. Explicit necessary and sufficient conditions for the QC-LDPC codes to have no short cycles are presented which are in favor of removing the bad points in the p-plane. Since preventing the short cycles also prevents the small stopping sets, the proposed construction method also leads to QC-LDPC codes with a higher stopping distance.
基金the National Natural Science Foundation of China (50275113).
文摘The basic principles of IF/THEN rules in rough set theory are analyzed first, and then the automatic process of knowledge acquisition is given. The numerical data is qualitatively processed by the classification of membership functions and membership degrees to get the normative decision table. The regular method of relations and the reduction algorithm of attributes are studied. The reduced relations are presented by the multi-representvalue method and its algorithm is offered. The whole knowledge acquisition process has high degree of automation and the extracted knowledge is true and reliable.
基金Project(62073342)supported by the National Natural Science Foundation of ChinaProject(2014 AA 041803)supported by the Hi-tech Research and Development Program of China。
文摘The operation variables,including feed rate of ore slurry,caustic solution and live steams in the double-stream alumina digestion process,determine the product quality,process costs and the environment pollution.Previously,they were set by the technical workers according to the offline analysis results and an empirical formula,which leads to unstable process indices and high consumption frequently.So,a multi-objective optimization model is built to maintain the balance between resource consumptions and process indices by taking technical indices and energy efficiency as objectives,where the key technical indices are predicted based on the digestion kinetics of diaspore.A multi-objective state transition algorithm(MOSTA)is improved to solve the problem,in which a self-adaptive strategy is applied to dynamically adjust the operator factors of the MOSTA and dynamic infeasible threshold is used to handle constraints to enhance searching efficiency and ability of the algorithm.Then a rule based strategy is designed to make the final decision from the Pareto frontiers.The method is integrated into an optimal control system for the industrial digestion process and tested in the actual production.Results show that the proposed method can achieve the technical target while reducing the energy consumption.
基金Natural Science Research of Jiangsu Higher Education Institutions of China(17KJA210003)The Project#31671613 and#31901462 supported by National Natural Science Foundation of China,Project funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions,China(PAPD)+1 种基金Natural Science Foundation of Jiangsu Province(BK20191439)Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX19_2106).
文摘Background: In order to uncover the mechanism of significantly reduced insect resistance at the late developmental stage in cotton(Gossypium hirsutum L.),the relationship between boll setting rate under different planting densities and Bacillus thuringiensis(Bt)insecticidal concentrations in the boll wall were investigated in the present study.Two studies were arranged at Yangzhou,China during the 2017–2018 cotton growth seasons.Five planting densities(15000,25000,45000,60000 and 75000 plants per hectare)and the flower-removal treatment were imposed separately on Bt cotton cultivar Sikang3 to arrange different boll setting rates,and the boll setting rates and Bt toxin content were compared.Results: Higher boll setting rate together with lower Bt toxin contents in boll wall was observed under low planting density,whereas lower boll setting rate and higher Bt toxin contents were found under high planting density.Also,higher Bt protein concentration was associated with higher soluble protein content,glutamic-pyruvic transaminase(GPT),and glutamic oxaloacetate transaminase(GOT)activities,but lower amino acid content,and protease and peptidase activities.It was further confirmed that a higher boll setting rate with lower Bt protein content under flower-removal.Conclusions: This study demonstrated that the insecticidal efficacy of boll walls was significantly impacted by boll formation.Reduced protein synthesis and enhanced protein degradation were related to the reduced Bt toxin concentration.
基金supported by the National Key R&D Program of China(2018YFC0309400)the National Natural Science Foundation of China(61871188)
文摘In many practical applications of image segmentation problems,employing prior information can greatly improve segmentation results.This paper continues to study one kind of prior information,called prior distribution.Within this research,there is no exact template of the object;instead only several samples are given.The proposed method,called the parametric distribution prior model,extends our previous model by adding the training procedure to learn the prior distribution of the objects.Then this paper establishes the energy function of the active contour model(ACM)with consideration of this parametric form of prior distribution.Therefore,during the process of segmenting,the template can update itself while the contour evolves.Experiments are performed on the airplane data set.Experimental results demonstrate the potential of the proposed method that with the information of prior distribution,the segmentation effect and speed can be both improved efficaciously.
文摘The plate tectonic model constructed by R.H. Sillitoe for the origin of porphyry copper deposits said that porphyry copper deposits were associated with convergent plate boundaries and compressional tectonic settings. They were formed along destructive plate margins above subduction zones of oceanic crust. Although this model is suitable for most porphyry copper deposits because the main porphyry copper deposit belts accord with the main Mesozoic or Cenozoic plate subduction zones in space and time in the world, it is difficult to use Sillitoe’s model for explaining the formation of some intracontinental porphyry deposits such as Yulong, the largest one in East Tibet.Having no relation with a subduction zone of plates, Yulong porphyry copper deposit was formed in an intracontinental extensional tectonic setting. Qamdo block, in which Yulong lies, was a small massif in East Tibet. With its Proterozoic crystalline basement and Lower Paleozoic folded basement, Qamdo block had experienced relative stable geologic evolution and a cover more than 20000m in thickness mainly composed of clastic rock and carbonate formed from Devonian to Cretaceous. During this time, although two small oceanic basins(Jinshajiang basin and Lancangjiang basin) between which Qamdo block lay developed and subducted and relevant island arc belts occured along the east and west margins of the block, all of them were closed before Later Triassic. In Cenozoic, mainly from 52 to 35Ma, influenced by the intracontinental convergence of the three large plates(India to the southwest, Tarim to the northwest,and Yangtze to the east), Qamdo block and its surrounding areas (East Tibet) which were just to the west of Yangtze plate were in an intracontinental pull\|apart situation induced by the sinistral strike\|slip fault system while most Himalaya—Kunlun—Tibet areas between India and Tarim plates were in a compression state by the SN\|trending tectonic stress. Controlled by the regional strike\|slip fault systems, the calc\|alkaline magma deriving from the upper mantle or lower crust ascended, occurring porphyry copper mineralization in the relative uplift areas. At the same time, in the relative depression areas, also controlled by the regional deep strike\|slip faults which might cut the lithosphere, several linear or rhombic pull\|apart red molasse basins such as Gongjoe, Nangqen, parallel to the porphyry belt, were formed in this region.
文摘Such disciplines as financial management,auditing,separated from the accounting diseipline system,have hecome anindependent professional,These two disciplines together with the original accounting diseipline,are listed in business administration firstlevel discipline in the category of management,as the secondary discipline or professional.This paper argues that requirements are met now toset up the first level discipline of accounting professional(or class),and the three secondary discipline(or major):the accounting,financialmanagement,auditing,should be included into accounting first level discipline(or classes).Then,accounting will become first level disciplineparalleling with business administration first level.
文摘The injection of bone cement is a promising surgical intervention for the treatment of osteoporosis.The aim of this study was to formulate a novel injectable bioactive bone cement to adress such medical problems.The bone cement primarily consists of tricalcium phosphate(β-TCP),konjac glucomannan(KGM),and hydroxyapatite whisker(HAw).An orthogonal experiment was designed to generate multiple sets of new composite calcium phosphate cement(NCPC)samples,and their setting times were measured.The in vitro compatibility of the new bone cement was assessed through relative cell proliferation rate(RGR)and in vitro cell growth experiments.Mechanical strength and porosity tests were conducted for each group of bone cement,and cross-sectional morphology was observed.The results demonstrate that the bone cement exhibits favorable properties such as self-curing,mechanical robustness,and resistance to collapse.The optimum formulation involves a doping ratio of 5/15(wt%)HAw and HA,an additional amount of 1.2wt%KGM,and a liquid citric acid concentration of 2wt%.Porosity tests confirmed that the material has high compressive strength and a favorable porosity of 27%,creating conducive conditions for cell growth,proliferation,and material degradation.Moreover,in vitro cell culture experiments revealed excellent biocompatibility of the material.Consequently,the developed NCPC emerges as a potential candidate material for applications of bone implantation.
