In this paper,we propose a new approach to tackle the separability problem for bipartite qudit mixed-states.This is based on the Majorana representation which allows to represent a N-spinors(qudit)as a symmetric state...In this paper,we propose a new approach to tackle the separability problem for bipartite qudit mixed-states.This is based on the Majorana representation which allows to represent a N-spinors(qudit)as a symmetric state of N spin-1/2.We also discuss how we can exploit such representation and the notion of the biseparability of multipartite qubit states in the sense to establish new criteria of the separability problem based on the PPT and concurrence.展开更多
The performances of a two-mode Gaussian state under paxametric amplification, symmetric amplitude damping and thermal noise axe studied. The time-dependent complex correlation matrix of the state in evolution is given...The performances of a two-mode Gaussian state under paxametric amplification, symmetric amplitude damping and thermal noise axe studied. The time-dependent complex correlation matrix of the state in evolution is given. The sepaxability of the final two-mode Gaussian state is examined under symmetric amplification and asymmetric amplification separately.展开更多
Separability is an important problem in theory of quantum entanglement. By using the Bloch representation of quantum states in terms of the Heisenberg-Weyl observable basis, we present a new separability criterion for...Separability is an important problem in theory of quantum entanglement. By using the Bloch representation of quantum states in terms of the Heisenberg-Weyl observable basis, we present a new separability criterion for bipartite quantum systems. It is shown that this criterion can be better than the previous ones in detecting entanglement. The results are generalized to multipartite quantum states.展开更多
A sufficient and necessary criterion for separability of bipartite quantum states is presented. We construct a class of mixed states in 2 k quantum systems and in 3 k quantum systems, respectively and show that thes...A sufficient and necessary criterion for separability of bipartite quantum states is presented. We construct a class of mixed states in 2 k quantum systems and in 3 k quantum systems, respectively and show that these states are separable if and only if they are positive partial transpositions.展开更多
An algorithm is developed to calculate the entanglement of formation for bipartite quantum states to determine numerically the sufficient condition of separability. The algorithm is applied to two 3 × 3 positive ...An algorithm is developed to calculate the entanglement of formation for bipartite quantum states to determine numerically the sufficient condition of separability. The algorithm is applied to two 3 × 3 positive partial transpose states mixed with white noise. For these two noisy states, our numerical sufficient conditions of separability are not far from the best necessary conditions of separability.展开更多
Mixed matrix membranes(MMMs)have demonstrated significant promise in energy-intensive gas separations by amalgamating the unique properties of fillers with the facile processability of polymers.However,achieving a sim...Mixed matrix membranes(MMMs)have demonstrated significant promise in energy-intensive gas separations by amalgamating the unique properties of fillers with the facile processability of polymers.However,achieving a simultaneous enhancement of permeability and selectivity remains a formidable challenge,due to the difficulty of achieving an optimal match between polymers and fillers.In this study,we incorporate a porous carbon-based zinc oxide composite(C@ZnO)into high-permeability polymers of intrinsic microporosity(PIMs)to fabricate MMMs.The dipole–dipole interaction between C@ZnO and PIMs ensures their exceptional compatibility,mitigating the formation of non-selective voids in the resulting MMMs.Concurrently,C@ZnO with abundant interconnected pores can provide additional low-resistance pathways for gas transport in MMMs.As a result,the CO_(2) permeability of the optimized C@ZnO/PIM-1 MMMs is elevated to 13,215 barrer,while the CO_(2)/N_(2) and CO_(2)/CH_(4) selectivity reached 21.5 and 14.4,respectively,substantially surpassing the 2008 Robeson upper bound.Additionally,molecular simulation results further corroborate that the augmented membrane gas selectivity is attributed to the superior CO_(2) affinity of C@ZnO.In summary,we believe that this work not only expands the application of MMMs for gas separation but also heralds a paradigm shift in the application of porous carbon materials.展开更多
All-safe liquid-state lithium-ion batteries(ASLS-LIBs) is of great interest as they can potentially combine the safety of all-solid-state batteries with the high performance and low manufacturing cost of traditional l...All-safe liquid-state lithium-ion batteries(ASLS-LIBs) is of great interest as they can potentially combine the safety of all-solid-state batteries with the high performance and low manufacturing cost of traditional liquid-state LIBs. However, the practical success of ASLS-LIBs is bottlenecked by the lack of advanced separator technology that can simultaneously realize high performances in puncturing-tolerability,fire-resistance, and importantly, wetting-capability with non-flammable liquid-electrolytes. Here, we propose a concept of inorganic in-situ separator(IISS) by hybrid-sol physical crosslinking directly onto the electrode surface to address the above challenges. Particularly, the hybrid-sol is designed with silica nanoparticles as the building block and poly(vinylidene difluoride) nanoparticles as the crosslinking agent. The critical factors for controlling the IISS microstructures and properties have been systematically investigated. The advantages of the IISS have been confirmed by its fast wetting with various fireresistant liquid-electrolytes, customizable thickness and porous structures, robust interface with planar or three-dimensional(3D)-structured electrodes, and importantly, unexpected self-adaptability against puncturing. Enabled by the above merits, a fire-resistant ASLS-LIB is successfully assembled and demonstrated with stable electrochemical performance. This sol-crosslinked IISS may open an avenue for the studies on the next-generation separator technology, cell assembling, solid electrolyte processing as well as non-flammable secondary batteries.展开更多
Membrane desalination is an economical and energy-efficient method to meet the current worldwide water scarcity.However,state-of-the-art reverse osmosis membranes are gradually being replaced by novel membrane materia...Membrane desalination is an economical and energy-efficient method to meet the current worldwide water scarcity.However,state-of-the-art reverse osmosis membranes are gradually being replaced by novel membrane materials as a result of ongoing technological advancements.These novel materials possess intrinsic pore structures or can be assembled to form lamellar membrane channels for selective transport of water or solutes(e.g.,NaCl).Still,in real applications,the results fall below the theoretical predictions,and a few properties,including large-scale fabrication,mechanical strength,and chemical stability,also have an impact on the overall effectiveness of those materials.In view of this,we develop a new evaluation framework in the form of radar charts with five dimensions(i.e.,water permeance,water/NaCl selectivity,membrane cost,scale of development,and stability)to assess the advantages,disadvantages,and potential of state-of-the-art and newly developed desalination membranes.In this framework,the reported thin film nanocomposite membranes and membranes developed from novel materials were compared with the state-of-the-art thin film composite membranes.This review will demonstrate the current advancements in novel membrane materials and bridge the gap between different desalination membranes.In this review,we also point out the prospects and challenges of next-generation membranes for desalination applications.We believe that this comprehensive framework may be used as a future reference for designing next-generation desalination membranes and will encourage further research and development in the field of membrane technology,leading to new insights and advancements.展开更多
The development of alkaline fuel cells is moving forward at an accelerated pace,and the application of ether-free bonded polymers to anion exchange membranes(AEMs)has been widely investigated.However,the question of ...The development of alkaline fuel cells is moving forward at an accelerated pace,and the application of ether-free bonded polymers to anion exchange membranes(AEMs)has been widely investigated.However,the question of the“trade-off”between AEM ionic conductivity and dimensional stability remains difficult.The strategy of inducing microphase separation to improve the performance of AEM has attracted much attention recently,but the design of optimal molecular structures is still being explored.Here,this work introduced different ratios of 3-bromo-1,1,1-trifluoroacetone(x=40,50,and 60)into the main chain of poly(p-terphenylene isatin).Because fluorinated groups have excellent hydrophobicity,hydrophilic hydroxyl-containing side chains are introduced to jointly adjust the formation of phase separation structure.The results show that PTI-PTF_(50)-NOH AEM with the appropriate fluorinated group ratio has the best ionic conductivity and alkali stability under the combined effect of both.It has an ionic conductivity of 133.83 mS cm^(-1)at 80°C.In addition,the OH-conductivity remains at 89%of the initial value at 80°C and 3 M KOH for 1056 h of immersion.The cell polarization curve based on PTI-PTF_(50)-NOH shows a power density of 734.76 mW cm^(-2)at a current density of 1807.7 mA cm^(-2).展开更多
The application of photocatalytic technology in H_(2) production,CO_(2) reduction,H_(2)O_(2) production,and pollutant degradation provides a promising approach to the alleviation of energy shortage and environmental i...The application of photocatalytic technology in H_(2) production,CO_(2) reduction,H_(2)O_(2) production,and pollutant degradation provides a promising approach to the alleviation of energy shortage and environmental issues 1-3.However,hindered by the easy recombination of electron-hole pairs,single-component photocatalysts usually exhibit inferior performance.Constructing heterojunction photocatalysts is a valid method which can improve charge separation and attain high catalytic efficiencies4.展开更多
Recycling waste frying oils for the synthesis of flotation reagents presents a promising avenue for sustainable waste management.Moreover,it offers a cost-effective solution for crafting a specialized collector design...Recycling waste frying oils for the synthesis of flotation reagents presents a promising avenue for sustainable waste management.Moreover,it offers a cost-effective solution for crafting a specialized collector designed to efficiently remove carbonates and enhance phosphate enrichment in froth flotation processes.This study focuses on the synthesis of an anionic collector using the saponification reaction of a frying oil sample,subsequently applied to the flotation of calcite and dolomite.To elucidate the adsorption mechanisms of the frying oil collector(FrOC)and sodium oleate,a reference collector,on fluorapatite,calcite,dolomite,and quartz surfaces,comprehensive experiments were conducted,including zeta potential measurements and Fourier transform infrared spectroscopy.Results revealed diverse adsorption affinities of the molecules towards these minerals.To assess the practical performance of the collector,flotation tests were conducted using a natural phosphate ore mixture,employing a BoxBehnken experimental design.Notably,under optimized conditions(pH 9,1000 g/t of FrOC,3.5 min of conditioning,and 6 min of flotation),FrOC exhibited excellent performance,with calcite and dolomite recoveries exceeding 80%,while apatite recovery in the concentrate fraction remained below 10%.This work exemplifies both circular economy practices and the distinctive approach to sustainable mineral processing.展开更多
Carbon peaking and carbon neutralization trigger a technical revolution in energy&environment related fields.Development of new technologies for green energy production and storage,industrial energy saving and eff...Carbon peaking and carbon neutralization trigger a technical revolution in energy&environment related fields.Development of new technologies for green energy production and storage,industrial energy saving and efficiency reinforcement,carbon capture,and pollutant gas treatment is in highly imperious demand.The emerging porous framework materials such as metal–organic frameworks(MOFs),covalent organic frameworks(COFs)and hydrogen-bonded organic frameworks(HOFs),owing to the permanent porosity,tremendous specific surface area,designable structure and customizable functionality,have shown great potential in major energy-consuming industrial processes,including sustainable energy gas catalytic conversion,energy-efficient industrial gas separation and storage.Herein,this manuscript presents a systematic review of porous framework materials for global and comprehensive energy&environment related applications,from a macroscopic and application perspective.展开更多
The Moon provides a unique environment for investigating nearby astrophysical events such as supernovae.Lunar samples retain valuable information from these events,via detectable long-lived“fingerprint”radionuclides...The Moon provides a unique environment for investigating nearby astrophysical events such as supernovae.Lunar samples retain valuable information from these events,via detectable long-lived“fingerprint”radionuclides such as^(60)Fe.In this work,we stepped up the development of an accelerator mass spectrometry(AMS)method for detecting^(60)Fe using the HI-13tandem accelerator at the China Institute of Atomic Energy(CIAE).Since interferences could not be sufficiently removed solely with the existing magnetic systems of the tandem accelerator and the following Q3D magnetic spectrograph,a Wien filter with a maximum voltage of±60 kV and a maximum magnetic field of 0.3 T was installed after the accelerator magnetic systems to lower the detection background for the low abundance nuclide^(60)Fe.A 1μm thick Si_(3)N_(4) foil was installed in front of the Q3D as an energy degrader.For particle detection,a multi-anode gas ionization chamber was mounted at the center of the focal plane of the spectrograph.Finally,an^(60)Fe sample with an abundance of 1.125×10^(-10)was used to test the new AMS system.These results indicate that^(60)Fe can be clearly distinguished from the isobar^(60)Ni.The sensitivity was assessed to be better than 4.3×10^(-14)based on blank sample measurements lasting 5.8 h,and the sensitivity could,in principle,be expected to be approximately 2.5×10^(-15)when the data were accumulated for 100 h,which is feasible for future lunar sample measurements because the main contaminants were sufficiently separated.展开更多
Direct air capture(DAC)has attracted increasing interest and investment over the past few years.There are a fast-growing number of companies that entered the field and demonstrated DAC carbon removal setups and potent...Direct air capture(DAC)has attracted increasing interest and investment over the past few years.There are a fast-growing number of companies that entered the field and demonstrated DAC carbon removal setups and potential.However,current DAC methods are still based on solid absorbents or alkali solutions approaches which have low capture efficiency and low energy efficiency.This highlight proposed a promising CO_(2) capture technology,an electric energy driven closed-loop system for the direct removal of CO_(2) from ambient air which are based on two individual technologies:Polyam-N-Cu hybrid system promoted CO_(2) capture with ocean as anthropogenic CO_(2) sink and a chloride-mediated electrochemical pH swing system to remove CO_(2) from oceanwater.展开更多
The unparalleled energy density has granted lithium-sulfur batteries(LSBs)with attractive usages.Unfortunately,LSBs still face some unsurpassed challenges in industrialization,with polysulfides shuttling,dendrite grow...The unparalleled energy density has granted lithium-sulfur batteries(LSBs)with attractive usages.Unfortunately,LSBs still face some unsurpassed challenges in industrialization,with polysulfides shuttling,dendrite growth and thermal hazard as the major problems triggering the cycling instability and low safety.With the merit of convenience,the method of designing functional separator has been adapted.Concretely,the carbon aerogel confined with CoS_(2)(CoS_(2)-NCA)is constructed and coated on Celgard separator surface,acquiring CoS_(2)-NCA modified separator(CoS_(2)-NCA@C),which holds the promoted electrolyte affinity and flame retardance.As revealed,CoS_(2)-NCA@C cell gives a high discharge capacity 1536.9 mAh/g at 1st cycle,much higher than that of Celgard cell(987.1 mAh/g).Moreover,the thermal runaway triggering time is dramatically prolonged by 777.4 min,corroborating the promoted thermal safety of cell.Noticeably,the higher coulombic efficiency stability and lower overpotential jointly confirm the efficacy of CoS_(2)-NCA@C in suppressing the lithium dendrite growth.Overall,this work can provide useful inspirations for designing functional separator,coping with the vexing issues of LSBs.展开更多
Aqueous zinc-ion batteries(AZIBs) hold great promise as a viable alternative to lithium-ion batteries owing to their high energy density and environmental friendliness.However,AZIBs are consistently plagued by the for...Aqueous zinc-ion batteries(AZIBs) hold great promise as a viable alternative to lithium-ion batteries owing to their high energy density and environmental friendliness.However,AZIBs are consistently plagued by the formation of zinc dendrites and concurrent side reactions,which significantly diminish their overall service life,In this study,the glass fiber separator(GF) is modified using zeolite imidazole salt framework-8(ZIF-8),enabling the development of efficient AZIBs.ZIF-8,which is abundant in nitrogen content,efficiently regulates the desolvation of [Zn(H_(2)O)_(6)]^(2+) to inhibit hydrogen production.Moreover,it possesses abundant nanochannels that facilitate the uniform deposition of Zn~(2+) via a localized action,thereby hindering the formation of dendrites.The insulating properties of ZIF-8 help prevent Zn^(2+) and water from trapping electron reduction at the layer surface,which reduces corrosion of the zinc anode.Consequently,ZIF-8-GF achieves the even transport of Zn^(2+) and regulates the homogeneous deposition along the Zn(002) crystal surface,thus significantly enhancing the electrochemical performance of the AZIBs,In particular,the Zn|Zn symmetric cell with the ZIF-8-GF separator delivers a stable cycle life at0.5 mA cm^(-2) of 2300 h.The Zn|ZIF-8-GF|MnO_(2) cell exhibits reduced voltage polarization while maintaining a capacity retention rate(93.4%) after 1200 cycles at 1.2 A g^(-1) The unique design of the modified diaphragm provides a new approach to realizing high-performance AZIBs.展开更多
Herein,the impact of the independent control of processing additives on vertical phase separation in sequentially deposited (SD) organic photovoltaics (OPVs) and its subsequent effects on charge carrier kinetics at th...Herein,the impact of the independent control of processing additives on vertical phase separation in sequentially deposited (SD) organic photovoltaics (OPVs) and its subsequent effects on charge carrier kinetics at the electron donor-acceptor interface are investigated.The film morphology exhibits notable variations,significantly depending on the layer to which 1,8-diiodooctane (DIO) was applied.Grazing incidence wide-angle X-ray scattering analysis reveals distinctly separated donor/acceptor phases and vertical crystallinity details in SD films.Time-of-flight secondary ion mass spectrometry analysis is employed to obtain component distributions in diverse vertical phase structures of SD films depending on additive control.In addition,nanosecond transient absorption spectroscopy shows that DIO control significantly affects the dynamics of separated charges in SD films.In SD OPVs,DIO appears to act through distinct mechanisms with minimal restriction,depending on the applied layer.This study emphasizes the significance of morphological optimization in improving device performance and underscores the importance of independent additive control in the advancement of OPV technology.展开更多
Industrial thin-film composite(TFC)membranes achieve superior gas separation properties from high-performance selective layer materials,while the success of membrane technology relies on high-performance gutter layers...Industrial thin-film composite(TFC)membranes achieve superior gas separation properties from high-performance selective layer materials,while the success of membrane technology relies on high-performance gutter layers to achieve production scalability and low-cost manufacturing.However,the current literature predominantly focuses on the design of polymer architectures to obtain high permeability and selectivity,while the art of fabricating gutter layers is usually safeguarded by industrial manufacturers and appears lackluster to academic researchers.This is the first report aiming to provide a comprehensive and critical review of state-of-the-art gutter layer materials and their design and modification to enable TFC membranes with superior separation performance.We first elucidate the importance of the gutter layer on membrane performance through modeling and experimental results.Then various gutter layer materials used to obtain high-performance composite membranes are critically reviewed,and the strategies to improve their compatibility with the selective layer are highlighted,such as oxygen plasma treatment,polydopamine deposition,and surface grafting.Finally,we present the opportunities of the gutter layer design for practical applications.展开更多
In LEO satellite communication networks,the number of satellites has increased sharply, the relative velocity of satellites is very fast, then electronic signal aliasing occurs from time to time. Those aliasing signal...In LEO satellite communication networks,the number of satellites has increased sharply, the relative velocity of satellites is very fast, then electronic signal aliasing occurs from time to time. Those aliasing signals make the receiving ability of the signal receiver worse, the signal processing ability weaker,and the anti-interference ability of the communication system lower. Aiming at the above problems, to save communication resources and improve communication efficiency, and considering the irregularity of interference signals, the underdetermined blind separation technology can effectively deal with the problem of interference sensing and signal reconstruction in this scenario. In order to improve the stability of source signal separation and the security of information transmission, a greedy optimization algorithm can be executed. At the same time, to improve network information transmission efficiency and prevent algorithms from getting trapped in local optima, delete low-energy points during each iteration process. Ultimately, simulation experiments validate that the algorithm presented in this paper enhances both the transmission efficiency of the network transmission system and the security of the communication system, achieving the process of interference sensing and signal reconstruction in the LEO satellite communication system.展开更多
Mixed matrix membranes(MMMs)could combine the advantages of both polymeric membranes and porousfillers,making them an effective alternative to conventional polymer membranes.However,interfacial incompatibility issues,s...Mixed matrix membranes(MMMs)could combine the advantages of both polymeric membranes and porousfillers,making them an effective alternative to conventional polymer membranes.However,interfacial incompatibility issues,such as the presence of interfacial voids,hardening of polymer chains,and blockage of micropores by polymers between common MMMsfillers and the polymer matrix,currently limit the gas sep-aration performance of MMMs.Ternary phase MMMs(consisting of afiller,an additive,and a matrix)made by adding a third compound,usually functionalized additives,can overcome the structural problems of binary phase MMMs and positively impact membrane separation performance.This review introduces the structure and fabrication processes for ternary MMMs,categorizes various nanofillers and the third component,and summarizes and analyzes in detail the CO_(2) separation performance of newly developed ternary MMMs based on both rubbery and glassy polymers.Based on this separation data,the challenges of ternary MMMs are also discussed.Finally,future directions for ternary MMMs are proposed.展开更多
文摘In this paper,we propose a new approach to tackle the separability problem for bipartite qudit mixed-states.This is based on the Majorana representation which allows to represent a N-spinors(qudit)as a symmetric state of N spin-1/2.We also discuss how we can exploit such representation and the notion of the biseparability of multipartite qubit states in the sense to establish new criteria of the separability problem based on the PPT and concurrence.
基金Project supported by the National Natural Science Foundation of China （Grant No 10575092）, the Zhejiang Province Natural Science Foundation （Grant No RC104265） and General Administration of Quality Supervision,Inspection and Quarantine of China . （Grant No 2004QK38）.
文摘The performances of a two-mode Gaussian state under paxametric amplification, symmetric amplitude damping and thermal noise axe studied. The time-dependent complex correlation matrix of the state in evolution is given. The sepaxability of the final two-mode Gaussian state is examined under symmetric amplification and asymmetric amplification separately.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11501153,11661031,and 11675113)the National Natural Science Foundation of Hainan Province,China(Grant No.20161006)
文摘Separability is an important problem in theory of quantum entanglement. By using the Bloch representation of quantum states in terms of the Heisenberg-Weyl observable basis, we present a new separability criterion for bipartite quantum systems. It is shown that this criterion can be better than the previous ones in detecting entanglement. The results are generalized to multipartite quantum states.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11101017 and 11275131)Beijing Natural Science Foundation Program,and the Scientific Research Key Program of Beijing Municipal Commission of Education(Grant No.KZ201210028032)the Importation and Developmentof High-Caliber Talents Project of Beijing Municipal Institutions(Grant No.CIT&TCD201404067)
文摘A sufficient and necessary criterion for separability of bipartite quantum states is presented. We construct a class of mixed states in 2 k quantum systems and in 3 k quantum systems, respectively and show that these states are separable if and only if they are positive partial transpositions.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11375152 and 60972071the Key Laboratory of New Network Standards and Technologies of Zhejiang Province under Grant No 2013E10012
文摘An algorithm is developed to calculate the entanglement of formation for bipartite quantum states to determine numerically the sufficient condition of separability. The algorithm is applied to two 3 × 3 positive partial transpose states mixed with white noise. For these two noisy states, our numerical sufficient conditions of separability are not far from the best necessary conditions of separability.
基金financial support from the National Natural Science Foundation of China(Nos.22108258 and 52003251)Program for Science&Technology Innovation Talents in Universities of Henan Province(24HASTIT004)+1 种基金Outstanding Youth Fund of Henan Scientific Committee(222300420085)Science and Technology Joint Project of Henan Province(222301420041)。
文摘Mixed matrix membranes(MMMs)have demonstrated significant promise in energy-intensive gas separations by amalgamating the unique properties of fillers with the facile processability of polymers.However,achieving a simultaneous enhancement of permeability and selectivity remains a formidable challenge,due to the difficulty of achieving an optimal match between polymers and fillers.In this study,we incorporate a porous carbon-based zinc oxide composite(C@ZnO)into high-permeability polymers of intrinsic microporosity(PIMs)to fabricate MMMs.The dipole–dipole interaction between C@ZnO and PIMs ensures their exceptional compatibility,mitigating the formation of non-selective voids in the resulting MMMs.Concurrently,C@ZnO with abundant interconnected pores can provide additional low-resistance pathways for gas transport in MMMs.As a result,the CO_(2) permeability of the optimized C@ZnO/PIM-1 MMMs is elevated to 13,215 barrer,while the CO_(2)/N_(2) and CO_(2)/CH_(4) selectivity reached 21.5 and 14.4,respectively,substantially surpassing the 2008 Robeson upper bound.Additionally,molecular simulation results further corroborate that the augmented membrane gas selectivity is attributed to the superior CO_(2) affinity of C@ZnO.In summary,we believe that this work not only expands the application of MMMs for gas separation but also heralds a paradigm shift in the application of porous carbon materials.
基金National Natural Science Foundation of China (52203123)Sichuan Science and Technology Program (2023NSFSC0991)+2 种基金State Key Laboratory of Polymer Materials Engineering (sklpme-2023-1-05 and sklpme-2024-2-04)Fundamental Research Funds for the Central UniversitiesThis research was also partially sponsored by the Double First-Class Construction Funds of Sichuan University。
文摘All-safe liquid-state lithium-ion batteries(ASLS-LIBs) is of great interest as they can potentially combine the safety of all-solid-state batteries with the high performance and low manufacturing cost of traditional liquid-state LIBs. However, the practical success of ASLS-LIBs is bottlenecked by the lack of advanced separator technology that can simultaneously realize high performances in puncturing-tolerability,fire-resistance, and importantly, wetting-capability with non-flammable liquid-electrolytes. Here, we propose a concept of inorganic in-situ separator(IISS) by hybrid-sol physical crosslinking directly onto the electrode surface to address the above challenges. Particularly, the hybrid-sol is designed with silica nanoparticles as the building block and poly(vinylidene difluoride) nanoparticles as the crosslinking agent. The critical factors for controlling the IISS microstructures and properties have been systematically investigated. The advantages of the IISS have been confirmed by its fast wetting with various fireresistant liquid-electrolytes, customizable thickness and porous structures, robust interface with planar or three-dimensional(3D)-structured electrodes, and importantly, unexpected self-adaptability against puncturing. Enabled by the above merits, a fire-resistant ASLS-LIB is successfully assembled and demonstrated with stable electrochemical performance. This sol-crosslinked IISS may open an avenue for the studies on the next-generation separator technology, cell assembling, solid electrolyte processing as well as non-flammable secondary batteries.
基金supported by a grant from the Research Grants Council of the Hong Kong Special Administration Region,China(SRFS2021-7S04)Partial support was also received from the Seed Funding for Strategic Interdisciplinary Research Scheme(102010174)+1 种基金Seed Fund for Basic Research(202111159075)of The University of Hong KongIn addition,part of this work was supported by the European Union’s Horizon 2020 research and innovation programme under grant agreement INTELWAT(No 958454).
文摘Membrane desalination is an economical and energy-efficient method to meet the current worldwide water scarcity.However,state-of-the-art reverse osmosis membranes are gradually being replaced by novel membrane materials as a result of ongoing technological advancements.These novel materials possess intrinsic pore structures or can be assembled to form lamellar membrane channels for selective transport of water or solutes(e.g.,NaCl).Still,in real applications,the results fall below the theoretical predictions,and a few properties,including large-scale fabrication,mechanical strength,and chemical stability,also have an impact on the overall effectiveness of those materials.In view of this,we develop a new evaluation framework in the form of radar charts with five dimensions(i.e.,water permeance,water/NaCl selectivity,membrane cost,scale of development,and stability)to assess the advantages,disadvantages,and potential of state-of-the-art and newly developed desalination membranes.In this framework,the reported thin film nanocomposite membranes and membranes developed from novel materials were compared with the state-of-the-art thin film composite membranes.This review will demonstrate the current advancements in novel membrane materials and bridge the gap between different desalination membranes.In this review,we also point out the prospects and challenges of next-generation membranes for desalination applications.We believe that this comprehensive framework may be used as a future reference for designing next-generation desalination membranes and will encourage further research and development in the field of membrane technology,leading to new insights and advancements.
基金Natural Science Foundation of China(grant nos 22075031)Jilin Provincial Science&Technology Department(grant nos 20220201105GX)Jilin Provincial Development and Reform Commission(grant nos 2023C034-4)。
文摘The development of alkaline fuel cells is moving forward at an accelerated pace,and the application of ether-free bonded polymers to anion exchange membranes(AEMs)has been widely investigated.However,the question of the“trade-off”between AEM ionic conductivity and dimensional stability remains difficult.The strategy of inducing microphase separation to improve the performance of AEM has attracted much attention recently,but the design of optimal molecular structures is still being explored.Here,this work introduced different ratios of 3-bromo-1,1,1-trifluoroacetone(x=40,50,and 60)into the main chain of poly(p-terphenylene isatin).Because fluorinated groups have excellent hydrophobicity,hydrophilic hydroxyl-containing side chains are introduced to jointly adjust the formation of phase separation structure.The results show that PTI-PTF_(50)-NOH AEM with the appropriate fluorinated group ratio has the best ionic conductivity and alkali stability under the combined effect of both.It has an ionic conductivity of 133.83 mS cm^(-1)at 80°C.In addition,the OH-conductivity remains at 89%of the initial value at 80°C and 3 M KOH for 1056 h of immersion.The cell polarization curve based on PTI-PTF_(50)-NOH shows a power density of 734.76 mW cm^(-2)at a current density of 1807.7 mA cm^(-2).
文摘The application of photocatalytic technology in H_(2) production,CO_(2) reduction,H_(2)O_(2) production,and pollutant degradation provides a promising approach to the alleviation of energy shortage and environmental issues 1-3.However,hindered by the easy recombination of electron-hole pairs,single-component photocatalysts usually exhibit inferior performance.Constructing heterojunction photocatalysts is a valid method which can improve charge separation and attain high catalytic efficiencies4.
基金financially supported through the research program between OCP Group and UM6P under the specific agreement AS34-flotation project
文摘Recycling waste frying oils for the synthesis of flotation reagents presents a promising avenue for sustainable waste management.Moreover,it offers a cost-effective solution for crafting a specialized collector designed to efficiently remove carbonates and enhance phosphate enrichment in froth flotation processes.This study focuses on the synthesis of an anionic collector using the saponification reaction of a frying oil sample,subsequently applied to the flotation of calcite and dolomite.To elucidate the adsorption mechanisms of the frying oil collector(FrOC)and sodium oleate,a reference collector,on fluorapatite,calcite,dolomite,and quartz surfaces,comprehensive experiments were conducted,including zeta potential measurements and Fourier transform infrared spectroscopy.Results revealed diverse adsorption affinities of the molecules towards these minerals.To assess the practical performance of the collector,flotation tests were conducted using a natural phosphate ore mixture,employing a BoxBehnken experimental design.Notably,under optimized conditions(pH 9,1000 g/t of FrOC,3.5 min of conditioning,and 6 min of flotation),FrOC exhibited excellent performance,with calcite and dolomite recoveries exceeding 80%,while apatite recovery in the concentrate fraction remained below 10%.This work exemplifies both circular economy practices and the distinctive approach to sustainable mineral processing.
基金the financial support from the National Natural Science Foundation of China(22090062,21922810,21825802,22138003,22108083,and 21725603)the Guangdong Pearl River Talents Program(2021QN02C8)+3 种基金the Science and Technology Program of Guangzhou(202201010118)Zhejiang Provincial Natural Science Foundation of China(LR20B060001)National Science Fund for Excellent Young Scholars(22122811)China Postdoctoral Science Foundation(2022M710123)。
文摘Carbon peaking and carbon neutralization trigger a technical revolution in energy&environment related fields.Development of new technologies for green energy production and storage,industrial energy saving and efficiency reinforcement,carbon capture,and pollutant gas treatment is in highly imperious demand.The emerging porous framework materials such as metal–organic frameworks(MOFs),covalent organic frameworks(COFs)and hydrogen-bonded organic frameworks(HOFs),owing to the permanent porosity,tremendous specific surface area,designable structure and customizable functionality,have shown great potential in major energy-consuming industrial processes,including sustainable energy gas catalytic conversion,energy-efficient industrial gas separation and storage.Herein,this manuscript presents a systematic review of porous framework materials for global and comprehensive energy&environment related applications,from a macroscopic and application perspective.
基金supported by the National Natural Science Foundation of China(Nos.12125509,12222514,11961141003,and 12005304)National Key Research and Development Project(No.2022YFA1602301)+1 种基金CAST Young Talent Support Planthe CNNC Science Fund for Talented Young Scholars Continuous support for basic scientific research projects。
文摘The Moon provides a unique environment for investigating nearby astrophysical events such as supernovae.Lunar samples retain valuable information from these events,via detectable long-lived“fingerprint”radionuclides such as^(60)Fe.In this work,we stepped up the development of an accelerator mass spectrometry(AMS)method for detecting^(60)Fe using the HI-13tandem accelerator at the China Institute of Atomic Energy(CIAE).Since interferences could not be sufficiently removed solely with the existing magnetic systems of the tandem accelerator and the following Q3D magnetic spectrograph,a Wien filter with a maximum voltage of±60 kV and a maximum magnetic field of 0.3 T was installed after the accelerator magnetic systems to lower the detection background for the low abundance nuclide^(60)Fe.A 1μm thick Si_(3)N_(4) foil was installed in front of the Q3D as an energy degrader.For particle detection,a multi-anode gas ionization chamber was mounted at the center of the focal plane of the spectrograph.Finally,an^(60)Fe sample with an abundance of 1.125×10^(-10)was used to test the new AMS system.These results indicate that^(60)Fe can be clearly distinguished from the isobar^(60)Ni.The sensitivity was assessed to be better than 4.3×10^(-14)based on blank sample measurements lasting 5.8 h,and the sensitivity could,in principle,be expected to be approximately 2.5×10^(-15)when the data were accumulated for 100 h,which is feasible for future lunar sample measurements because the main contaminants were sufficiently separated.
文摘Direct air capture(DAC)has attracted increasing interest and investment over the past few years.There are a fast-growing number of companies that entered the field and demonstrated DAC carbon removal setups and potential.However,current DAC methods are still based on solid absorbents or alkali solutions approaches which have low capture efficiency and low energy efficiency.This highlight proposed a promising CO_(2) capture technology,an electric energy driven closed-loop system for the direct removal of CO_(2) from ambient air which are based on two individual technologies:Polyam-N-Cu hybrid system promoted CO_(2) capture with ocean as anthropogenic CO_(2) sink and a chloride-mediated electrochemical pH swing system to remove CO_(2) from oceanwater.
基金financially supported by the National Natural Science Foundation of China(52104197)Hongkong Scholar Program(XJ2022022)+5 种基金National Science Foundation for Post-doctoral Scientists of China(2021M691549,2021M703082)National Natural Science Foundation of China(52272396,52306090)Jiangsu Provincial Double-Innovation Doctor Program(JSSCBS20210402)Natural Science Foundation of the Jiangsu Higher Education Institutions(21KJB620001)The Open Fund of the State Key Laboratory of Fire Science(SKLFS)Program(HZ2022-KF04)Postgraduate Research&Practice Innovation Program of Jiangsu Province(SJCX22-0457)。
文摘The unparalleled energy density has granted lithium-sulfur batteries(LSBs)with attractive usages.Unfortunately,LSBs still face some unsurpassed challenges in industrialization,with polysulfides shuttling,dendrite growth and thermal hazard as the major problems triggering the cycling instability and low safety.With the merit of convenience,the method of designing functional separator has been adapted.Concretely,the carbon aerogel confined with CoS_(2)(CoS_(2)-NCA)is constructed and coated on Celgard separator surface,acquiring CoS_(2)-NCA modified separator(CoS_(2)-NCA@C),which holds the promoted electrolyte affinity and flame retardance.As revealed,CoS_(2)-NCA@C cell gives a high discharge capacity 1536.9 mAh/g at 1st cycle,much higher than that of Celgard cell(987.1 mAh/g).Moreover,the thermal runaway triggering time is dramatically prolonged by 777.4 min,corroborating the promoted thermal safety of cell.Noticeably,the higher coulombic efficiency stability and lower overpotential jointly confirm the efficacy of CoS_(2)-NCA@C in suppressing the lithium dendrite growth.Overall,this work can provide useful inspirations for designing functional separator,coping with the vexing issues of LSBs.
基金financially supported by National Natural Science Foundation of China(No.51872090,51772097)Hebei Natural Science Fund for Distinguished Young Scholar(No.E2019209433)+2 种基金Youth Talent Program of Hebei Provincial Education Department(No.BJ2018020)Natural Science Foundation of Hebei Province(No.E2020209151)the financial support from Donghua University(101-08-0241022,23D210105,and 101-07-005759)。
文摘Aqueous zinc-ion batteries(AZIBs) hold great promise as a viable alternative to lithium-ion batteries owing to their high energy density and environmental friendliness.However,AZIBs are consistently plagued by the formation of zinc dendrites and concurrent side reactions,which significantly diminish their overall service life,In this study,the glass fiber separator(GF) is modified using zeolite imidazole salt framework-8(ZIF-8),enabling the development of efficient AZIBs.ZIF-8,which is abundant in nitrogen content,efficiently regulates the desolvation of [Zn(H_(2)O)_(6)]^(2+) to inhibit hydrogen production.Moreover,it possesses abundant nanochannels that facilitate the uniform deposition of Zn~(2+) via a localized action,thereby hindering the formation of dendrites.The insulating properties of ZIF-8 help prevent Zn^(2+) and water from trapping electron reduction at the layer surface,which reduces corrosion of the zinc anode.Consequently,ZIF-8-GF achieves the even transport of Zn^(2+) and regulates the homogeneous deposition along the Zn(002) crystal surface,thus significantly enhancing the electrochemical performance of the AZIBs,In particular,the Zn|Zn symmetric cell with the ZIF-8-GF separator delivers a stable cycle life at0.5 mA cm^(-2) of 2300 h.The Zn|ZIF-8-GF|MnO_(2) cell exhibits reduced voltage polarization while maintaining a capacity retention rate(93.4%) after 1200 cycles at 1.2 A g^(-1) The unique design of the modified diaphragm provides a new approach to realizing high-performance AZIBs.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.RS-2023-00213920,NRF-2021R1A4A1031761).
文摘Herein,the impact of the independent control of processing additives on vertical phase separation in sequentially deposited (SD) organic photovoltaics (OPVs) and its subsequent effects on charge carrier kinetics at the electron donor-acceptor interface are investigated.The film morphology exhibits notable variations,significantly depending on the layer to which 1,8-diiodooctane (DIO) was applied.Grazing incidence wide-angle X-ray scattering analysis reveals distinctly separated donor/acceptor phases and vertical crystallinity details in SD films.Time-of-flight secondary ion mass spectrometry analysis is employed to obtain component distributions in diverse vertical phase structures of SD films depending on additive control.In addition,nanosecond transient absorption spectroscopy shows that DIO control significantly affects the dynamics of separated charges in SD films.In SD OPVs,DIO appears to act through distinct mechanisms with minimal restriction,depending on the applied layer.This study emphasizes the significance of morphological optimization in improving device performance and underscores the importance of independent additive control in the advancement of OPV technology.
基金support from the U.S.Department of Energy National Energy Technology Laboratory(DE-FE0031736)the New York State Foundation for Science,Technology and Innovation(NYSTAR).
文摘Industrial thin-film composite(TFC)membranes achieve superior gas separation properties from high-performance selective layer materials,while the success of membrane technology relies on high-performance gutter layers to achieve production scalability and low-cost manufacturing.However,the current literature predominantly focuses on the design of polymer architectures to obtain high permeability and selectivity,while the art of fabricating gutter layers is usually safeguarded by industrial manufacturers and appears lackluster to academic researchers.This is the first report aiming to provide a comprehensive and critical review of state-of-the-art gutter layer materials and their design and modification to enable TFC membranes with superior separation performance.We first elucidate the importance of the gutter layer on membrane performance through modeling and experimental results.Then various gutter layer materials used to obtain high-performance composite membranes are critically reviewed,and the strategies to improve their compatibility with the selective layer are highlighted,such as oxygen plasma treatment,polydopamine deposition,and surface grafting.Finally,we present the opportunities of the gutter layer design for practical applications.
基金supported by National Natural Science Foundation of China (62171390)Central Universities of Southwest Minzu University (ZYN2022032,2023NYXXS034)the State Scholarship Fund of the China Scholarship Council (NO.202008510081)。
文摘In LEO satellite communication networks,the number of satellites has increased sharply, the relative velocity of satellites is very fast, then electronic signal aliasing occurs from time to time. Those aliasing signals make the receiving ability of the signal receiver worse, the signal processing ability weaker,and the anti-interference ability of the communication system lower. Aiming at the above problems, to save communication resources and improve communication efficiency, and considering the irregularity of interference signals, the underdetermined blind separation technology can effectively deal with the problem of interference sensing and signal reconstruction in this scenario. In order to improve the stability of source signal separation and the security of information transmission, a greedy optimization algorithm can be executed. At the same time, to improve network information transmission efficiency and prevent algorithms from getting trapped in local optima, delete low-energy points during each iteration process. Ultimately, simulation experiments validate that the algorithm presented in this paper enhances both the transmission efficiency of the network transmission system and the security of the communication system, achieving the process of interference sensing and signal reconstruction in the LEO satellite communication system.
基金support from Sichuan Science and Technology Program(2021YFH0116)National Natural Science Foundation of China(No.52170112)DongFang Boiler Co.,Ltd.(3522015).
文摘Mixed matrix membranes(MMMs)could combine the advantages of both polymeric membranes and porousfillers,making them an effective alternative to conventional polymer membranes.However,interfacial incompatibility issues,such as the presence of interfacial voids,hardening of polymer chains,and blockage of micropores by polymers between common MMMsfillers and the polymer matrix,currently limit the gas sep-aration performance of MMMs.Ternary phase MMMs(consisting of afiller,an additive,and a matrix)made by adding a third compound,usually functionalized additives,can overcome the structural problems of binary phase MMMs and positively impact membrane separation performance.This review introduces the structure and fabrication processes for ternary MMMs,categorizes various nanofillers and the third component,and summarizes and analyzes in detail the CO_(2) separation performance of newly developed ternary MMMs based on both rubbery and glassy polymers.Based on this separation data,the challenges of ternary MMMs are also discussed.Finally,future directions for ternary MMMs are proposed.
