Monitoring biogenic amines,which are metabolic byproducts of shrimp spoilage,is crucial for assessing food quality.Currently,most detection methods for biogenic amines suffer from limitations such as time-consuming pr...Monitoring biogenic amines,which are metabolic byproducts of shrimp spoilage,is crucial for assessing food quality.Currently,most detection methods for biogenic amines suffer from limitations such as time-consuming procedures,complex operations,and delayed results.Colorimetric analysis techniques have gained attention in recent years due to their advantages of short analysis time,simple operation,and suitability for on-site testing.This study successfully developed a series of colorimetric sensor platforms for biogenic amines by loading the natural active ingredient curcumin(CUR)and its derivative of Boron complex BFCUR onto filter paper and electrospun nanofibre films(ENFs),respectively.By analyzing the color response differences of these sensors upon contact with biogenic amines,the colorimetric sensors with superior detection performance were selected and further applied to the visual monitoring and indication of shrimp spoilage processes.展开更多
Detection of target analytes at low concentrations is significant in various fields,including pharmaceuticals,healthcare,and environmental protection.Theophylline(TP),a natural alkaloid used as a bronchodilator to tre...Detection of target analytes at low concentrations is significant in various fields,including pharmaceuticals,healthcare,and environmental protection.Theophylline(TP),a natural alkaloid used as a bronchodilator to treat respiratory disorders such as asthma,bronchitis,and emphysema,has a narrow therapeutic window with a safe plasma concentration ranging from 55.5-111.0μmol·L^(-1)in adults.Accurate monitoring of TP levels is essential because too low or too high can cause se-rious side effects.In this regard,non-enzymatic electrochemical sensors offer a practical solution with rapidity,portability,and high sensitivity.This article aims to provide a comprehensive review of the recent developments of non-enzymatic electrochemical sensors for TP detection,highlighting the basic principles,electro-oxidation mechanisms,catalytic effects,and the role of modifying materials on electrode performance.Carbon-based electrodes such as glassy carbon electrodes(GCEs),carbon paste electrodes(CPEs),and carbon screen-printed electrodes(SPCEs)have become the primary choices for non-enzymatic sensors due to their chemical stability,low cost,and flexibility in modification.This article identifies the sig-nificant contribution of various modifying materials,including nanomaterials such as carbon nanotubes(CNTs),graphene,metal oxides,and multi-element nanocomposites.These modifications enhance sensors’electron transfer,sensitivity,and selectivity in detecting TP at low concentrations in complex media such as blood plasma and pharmaceutical samples.The electro-oxidation mechanism of TP is also discussed in depth,emphasizing the hydroxyl and carbonyl reaction pathways strongly influenced by pH and electrode materials.These mechanisms guide the selection of the appropriate electrode ma-terial for a particular application.The main contribution of this article is to identify superior modifying materials that can improve the performance of non-enzymatic electrochemical sensors.In a recent study,the combination of multi-element nanocomposites based on titanium dioxide(TiO_(2)),CNTs,and gold nanoparticles(AuNPs)resulted in the lowest detection limit of 3×10^(-5)μmol·L^(-1),reflecting the great potential of these materials for developing high-performance electrochemical sensors.The main conclusion of this article is the importance of a multidisciplinary approach in electrode material design to support the sensitivity and selectivity of TP detection.In addition,there is still a research gap in understanding TP’s more detailed oxidation mechanism,especially under pH variations and complex environments.Therefore,further research on electrode modification and analysis of the TP oxidation mechanism are urgently needed to improve the accuracy and sta-bility of the sensor while expanding its applications in pharmaceutical monitoring and medical diagnostics.By integrating various innovative materials and technical approaches,this review is expected to be an essential reference for developing efficient and affordable non-enzymatic electrochemical sensors.展开更多
In a measurement system, new representation methods are necessary to maintain the uncertainty and to supply more powerful ability for reasoning and transformation between numerical system and symbolic system. A grey m...In a measurement system, new representation methods are necessary to maintain the uncertainty and to supply more powerful ability for reasoning and transformation between numerical system and symbolic system. A grey measurement system is discussed from the point of view of intelligent sensors and incomplete information processing compared with a numerical and symbolized measurement system. The methods of grey representation and information processing are proposed for data collection and reasoning. As a case study, multi-ultrasonic sensor systems are demonstrated to verify the effectiveness of the proposed methods.展开更多
As positioning sensors,edge computation power,and communication technologies continue to develop,a moving agent can now sense its surroundings and communicate with other agents.By receiving spatial information from bo...As positioning sensors,edge computation power,and communication technologies continue to develop,a moving agent can now sense its surroundings and communicate with other agents.By receiving spatial information from both its environment and other agents,an agent can use various methods and sensor types to localize itself.With its high flexibility and robustness,collaborative positioning has become a widely used method in both military and civilian applications.This paper introduces the basic fundamental concepts and applications of collaborative positioning,and reviews recent progress in the field based on camera,LiDAR(Light Detection and Ranging),wireless sensor,and their integration.The paper compares the current methods with respect to their sensor type,summarizes their main paradigms,and analyzes their evaluation experiments.Finally,the paper discusses the main challenges and open issues that require further research.展开更多
Pedestrian positioning system(PPS)using wearable inertial sensors has wide applications towards various emerging fields such as smart healthcare,emergency rescue,soldier positioning,etc.The performance of traditional ...Pedestrian positioning system(PPS)using wearable inertial sensors has wide applications towards various emerging fields such as smart healthcare,emergency rescue,soldier positioning,etc.The performance of traditional PPS is limited by the cumulative error of inertial sensors,complex motion modes of pedestrians,and the low robustness of the multi-sensor collaboration structure.This paper presents a hybrid pedestrian positioning system using the combination of wearable inertial sensors and ultrasonic ranging(H-PPS).A robust two nodes integration structure is developed to adaptively combine the motion data acquired from the single waist-mounted and foot-mounted node,and enhanced by a novel ellipsoid constraint model.In addition,a deep-learning-based walking speed estimator is proposed by considering all the motion features provided by different nodes,which effectively reduces the cumulative error originating from inertial sensors.Finally,a comprehensive data and model dual-driven model is presented to effectively combine the motion data provided by different sensor nodes and walking speed estimator,and multi-level constraints are extracted to further improve the performance of the overall system.Experimental results indicate that the proposed H-PPS significantly improves the performance of the single PPS and outperforms existing algorithms in accuracy index under complex indoor scenarios.展开更多
Conductive polymer composites(CPCs)are widely used in the flexible strain sensors due to their simple fabrication process and controllable sensing properties.However,temperature has a significance impact on the strain...Conductive polymer composites(CPCs)are widely used in the flexible strain sensors due to their simple fabrication process and controllable sensing properties.However,temperature has a significance impact on the strain sensing performance of CPCs.In this paper,the strain sensing characteristics of MWCNTs/PDMS composites under temperature loading were systematically studied.It was found that the sensitivity decreased with the increase of temperature and the phenomenon of shoulder peak also decreased.Based on the theory of polymer mechanics,it was found that temperature could affect the conductive network by changing the motion degree of PDMS molecular chain,resulting in the change of sensing characteristics.Finally,a mathematical model of the resistance against loading condition(strain and temperature),associated with the force−electrical equivalent relationship of composites,was established to discuss the experimental results as well as the sensing mechanism.The results presented in this paper was believed helpful for the further application of strain sensors in different temperature conditions.展开更多
Flower-liked SnO_2 nanorods were prepared by a hydrothermal method.The sensors were fabricated using SnO_2 nanorods adsorption of Au nanoparticles through sputtering deposition.We found that the loading of a small amo...Flower-liked SnO_2 nanorods were prepared by a hydrothermal method.The sensors were fabricated using SnO_2 nanorods adsorption of Au nanoparticles through sputtering deposition.We found that the loading of a small amount of Au nanoparticles on the surface of SnO_2 nanorods can effectively enhance and functionalize the gas sensing performance of SnO_2 nanorods,which due to the Au adsorption make the surface-depletion effect more pronounced.Such enhanced surface depletion increases the sensitivity,lowers the operation temperature and decreases the response time.展开更多
The interrupted-sampling repeater jamming(ISRJ)can cause false targets to the radio-frequency proximity sensors(RFPSs),resulting in a serious decline in the target detection capability of the RFPS.This article propose...The interrupted-sampling repeater jamming(ISRJ)can cause false targets to the radio-frequency proximity sensors(RFPSs),resulting in a serious decline in the target detection capability of the RFPS.This article proposes a recognition method for RFPSs to identify the false targets caused by ISRJ.The proposed method is realized by assigning a unique identity(ID)to each RFPS,and each ID is a periodically and chaotically encrypted in every pulse period.The processing technique of the received signal is divided into ranging and ID decryption.In the ranging part,a high-resolution range profile(HRRP)can be obtained by performing pulse compression with the binary chaotic sequences.To suppress the noise,the singular value decomposition(SVD)is applied in the preprocessing.Regarding ID decryption,targets and ISRJ can be recognized through the encryption and decryption processes,which are controlled by random keys.An adaptability analysis conducted in terms of the peak-to-side lobe ratio(PSLR)and bit error rate(BER)indicates that the proposed method performs well within a 70-k Hz Doppler shift.A simulation and experimental results show that the proposed method achieves extremely stable target and ISRJ recognition accuracies at different signal-to-noise ratios(SNRs)and jamming-to-signal ratios(JSRs).展开更多
Wireless sensor network (WSN) of active sensors suffers from serious inter-sensor interference (ISI) and imposes new design and implementation challenges. In this paper, based on the ultrasonic sensor network, two tim...Wireless sensor network (WSN) of active sensors suffers from serious inter-sensor interference (ISI) and imposes new design and implementation challenges. In this paper, based on the ultrasonic sensor network, two time-division based distributed sensor scheduling schemes are proposed to deal with ISI by scheduling sensors periodically and adaptively respectively. Extended Kalman filter (EKF) is used as the tracking algorithm in distributed manner. Simulation results show that the adaptive sensor scheduling scheme can achieve superior tracking accuracy with faster tracking convergence speed.展开更多
Sensors deployment optimization has become one of the most attractive fields in recent years. However, most of the previous work focused on the deployment problem in 2D space.Compared to the traditional form, sensors ...Sensors deployment optimization has become one of the most attractive fields in recent years. However, most of the previous work focused on the deployment problem in 2D space.Compared to the traditional form, sensors deployment in multidimensional space has greater research significance and practical potential to satisfy the detecting needs in complex environment.Aiming at solving this issue, a multi-dimensional space sensor network model is established, and the radar system is selected as an example. Considering the possible working mode of the radar system(e.g., searching and tracking), two distinctive deployment models are proposed based on maximum coverage area and maximum target detection probability in the attack direction respectively. The latter one is usually ignored in the previous literature.For uncovering the optimal deployment of the sensor network, the particle swarm optimization(PSO) algorithm is improved using the proposed weights determination scheme, in which the linear decreasing, the pooling strategy and the cloud theory are combined for weights updating. Experimental results illustrate the effectiveness of the proposed method.展开更多
A two-dimensional direction-of-arrival （DOA） and polarization estimation algorithm for coherent sources using a linear vector-sensor array is presented. Two matrices are first constructed by the receiving data. The ...A two-dimensional direction-of-arrival （DOA） and polarization estimation algorithm for coherent sources using a linear vector-sensor array is presented. Two matrices are first constructed by the receiving data. The ranks of the two matrices are only related to the DOAs of the sources and independent of their coherency. Then the source’s elevation is resolved via the matrix pencil （MP） method, and the singular value decomposition （SVD） is used to reduce the noise effect. Finally, the source’s steering vector is estimated, and the analytics solutions of the source’s azimuth and polarization parameter can be directly computed by using a vector cross-product estimator. Moreover, the proposed algorithm can achieve the unambiguous direction estimates, even if the space between adjacent sensors is larger than a half-wavelength. Theoretical and numerical simulations show the effectiveness of the proposed algorithm.展开更多
The sensing performances of multiple networked Ga N nanowire(NW) sensor codecorated with Au and Pt nanoparticles were examined. The pristine Ga N nanowires show responses of approximately 108%-173% to 0.05%-0.25% H2 a...The sensing performances of multiple networked Ga N nanowire(NW) sensor codecorated with Au and Pt nanoparticles were examined. The pristine Ga N nanowires show responses of approximately 108%-173% to 0.05%-0.25% H2 at room temperature. On the other hand, the Ga N nanowires decorated with Au and those decorated with Pt lead to 1.1-1.3 and 1.2-1.6 times,respectively, stronger responses to 0.05%-0.25% H2. In contrast, the Au Pt-codecorated Ga N nanowires show 1.3-2.0 times stronger responses to 0.05%-0.25% H2. In other words, the Ga N nanorods codecorated with Au and Pt nanoparticles show much stronger response to H2 gas than the Au or Pt monometal-decorated counterpart. The underlying mechanism for the enhanced response of the Au Pt-codecorated Ga N nanowire was discussed.展开更多
Target tracking is one of the applications of wireless sensor networks(WSNs).It is assumed that each sensor has a limited range for detecting the presence of the object,and the network is sufficiently dense so that th...Target tracking is one of the applications of wireless sensor networks(WSNs).It is assumed that each sensor has a limited range for detecting the presence of the object,and the network is sufficiently dense so that the sensors can cover the area of interest.Due to the limited battery resources of sensors,there is a tradeoff between the energy consumption and tracking accuracy.To solve this problem,this paper proposes an energy efficient tracking algorithm.Based on the cooperation of dispatchers,sensors in the area are scheduled to switch their working mode to track the target.Since energy consumed in active mode is higher than that in monitoring or sleeping mode,for each sampling interval,a minimum set of sensors is woken up based on the select mechanism.Meanwhile,other sensors keep in sleeping mode.Performance analysis and simulation results show that the proposed algorithm provides a better performance than other existing approaches.展开更多
This research is dedicated to develop a safety measurement for human-machine cooperative system, in which the machine region and the human region cannot be separated due to the overlap and the movement both from human...This research is dedicated to develop a safety measurement for human-machine cooperative system, in which the machine region and the human region cannot be separated due to the overlap and the movement both from human and from machines. Our proposal here is to automatically monitor the moving objects by image sensing/recognition method, such that the machine system can get enough information about the environment situation and about the production progress at any time, and therefore the machines can accordingly take some corresponding actions automatically to avoid hazard. For this purpose, two types of monitor systems are proposed. The first type is based on the omni directional vision sensor, and the second is based on the stereo vision sensor. Each type may be used alone or together with another type, depending on the safety system's requirements and the specific situation of the manufacture field to be monitored. In this paper, the description about these two types are given, and as for the special application of these image sensors into safety control, the construction of a hierarchy safety system is proposed.展开更多
In order to consider the influence of steel pole on the measurement of wind speed sensors and determinate the installation position of wind speed sensors, the flow field around wind speed sensors was investigated. Bas...In order to consider the influence of steel pole on the measurement of wind speed sensors and determinate the installation position of wind speed sensors, the flow field around wind speed sensors was investigated. Based on the three-dimensional steady Reynolds-averaged Navier-Stokes equations and k-ε double equations turbulent model, the field flow around the wind speed sensor and the steel pole along a high-speed railway was simulated on an unstructured grid. The grid-independent validation was conducted and the accuracy of the present numerical simulation method was validated by experiments and simulations carried out by previous researchers. Results show that the steel pole has a significant influence on the measurement results of wind speed sensors. As the distance between two wind speed sensors is varied from 0.3 to 1.0 m, the impact angles are less than ±20°, it is proposed that the distance between two wind speed sensors is 0.8 m at least, and the interval between wind speed sensors and the steel pole is more than 1.0 m with the sensors located on the upstream side.展开更多
In order to achieve a wider range of ionizing radiations detection,novel fluorescence sensing materials have been developed that utilize the fluorescence enhancement phenomenon caused by the intramolecular photoinduce...In order to achieve a wider range of ionizing radiations detection,novel fluorescence sensing materials have been developed that utilize the fluorescence enhancement phenomenon caused by the intramolecular photoinduced electron transfer(PET)effect.Two perylene diimide isomers PDI-P and PDI-B were designed and synthesized,and their molecular structures were characterized by high-resolution Fourier transform mass spectrometry(HRMS),nuclear magnetic resonance hydrogen and carbon spectroscopy(~1H and~(13)C NMR).The interaction between ionizing radiation and fluorescent molecules was simulated by HCl titration.The results show that combining PDIs and HCl can improve fluorescence through the retro-PET process.Despite the similarities in chemical structures,the fluorescent enhancement multiple of PDI-B with aromatic amine as electron donor is much higher than that of PDI-P with alkyl amine.In the direct irradiation experiments of ionizing radiation,the emission enhancement multiples of PDI-P and PDI-B are 2.01 and 45.4,respectively.Furthermore,density functional theory(DFT)and time-dependent density functional theory(TDDFT)calculations indicate that the HOMO and HOMO-1 energy ranges of PDI-P and PDI-B are 0.54 e V and 1.13 e V,respectively.A wider energy range has a stronger driving force on electrons,which is conducive to fluorescence quenching.Both femtosecond transient absorption spectroscopy(fs-TAS)and transient fluorescence spectroscopy(TFS)tests show that PDI-B has shorter charge separation lifetime and higher electron transfer rate constant.Although both isomers can significantly reduce LOD during PET process,PDI-B with aromatic amine has a wider detection range of 0.118—240 Gy due to its larger emission enhancement,which is a leap of three orders of magnitude.It breaks through the detection range of gamma radiation reported in existing studies,and provides theoretical support for the further study of sensitive and effective new materials for ionizing radiation detection.展开更多
A novel classification algorithm based on abnormal magnetic signals is proposed for ground moving targets which are made of ferromagnetic material. According to the effect of diverse targets on earth's magnetism,t...A novel classification algorithm based on abnormal magnetic signals is proposed for ground moving targets which are made of ferromagnetic material. According to the effect of diverse targets on earth's magnetism,the moving targets are detected by a magnetic sensor and classified with a simple computation method. The detection sensor is used for collecting a disturbance signal of earth magnetic field from an undetermined target. An optimum category match pattern of target signature is tested by training some statistical samples and designing a classification machine. Three ordinary targets are researched in the paper. The experimental results show that the algorithm has a low computation cost and a better sorting accuracy. This classification method can be applied to ground reconnaissance and target intrusion detection.展开更多
Atomic spin gyroscopes are promising candidates for next-generation inertial navigation due to extremely high theoretical precision,relatively small size among atomic gyroscopes,and promising potential for miniaturiza...Atomic spin gyroscopes are promising candidates for next-generation inertial navigation due to extremely high theoretical precision,relatively small size among atomic gyroscopes,and promising potential for miniaturization.In particular,the spin-exchange relaxation-free(SERF)atomic gyroscope relies on optical pumping to polarize atoms,enabling rotation sensing through the Faraday optical rotation angle(FORA).However,fluctuations in atomic density introduce systematic errors in FORA measurements,limiting long-term stability.We present a data-driven decoupling method that isolates atomic density fluctuations from the FORA signal by modeling spatially resolved light absorption in the vapor cell.The model accounts for the spatial distribution of spin polarization in the pump-light interaction volume,density-dependent relaxation rates,wall-induced relaxation,and polarization diffusion,and is implemented within a finite-element framework.Compared to the conventional Lambert-Beer law,which assumes one-dimensional homogeneity,our approach captures the full threedimensional density and polarization distribution,significantly improving the accuracy of light absorption modeling.The resulting absorption-density maps are used to train a feedforward neural network,yielding a high-precision estimator for atomic density fluctuations.This estimator enables the construction of a decoupling equation that separates the density contribution from the FORA signal.Experimental validation shows that this method improves the bias instability atσ(100 s)of the gyroscope was improved by 73.1%compared to traditional platinum-resistance-based stabilization.The proposed framework is general and can be extended to other optical pumping-based sensors,such as optically pumped magnetometers.展开更多
The Savitzky-Golay(SG)filter,which employs polynomial least-squares approximations to smooth data and estimate derivatives,is widely used for processing noisy data.However,noise suppression by the SG filter is recogni...The Savitzky-Golay(SG)filter,which employs polynomial least-squares approximations to smooth data and estimate derivatives,is widely used for processing noisy data.However,noise suppression by the SG filter is recognized to be limited at data boundaries and high frequencies,which can significantly reduce the signal-to-noise ratio(SNR).To solve this problem,a novel method synergistically integrating Principal Component Analysis(PCA)with SG filtering is proposed in this paper.This approach avoids the is-sue of excessive smoothing associated with larger window sizes.The proposed PCA-SG filtering algorithm was applied to a CO gas sensing system based on Cavity Ring-Down Spectroscopy(CRDS).The perform-ance of the PCA-SG filtering algorithm is demonstrated through comparison with Moving Average Filtering(MAF),Wavelet Transformation(WT),Kalman Filtering(KF),and the SG filter.The results demonstrate that the proposed algorithm exhibits superior noise reduction capabilities compared to the other algorithms evaluated.The SNR of the ring-down signal was improved from 11.8612 dB to 29.0913 dB,and the stand-ard deviation of the extracted ring-down time constant was reduced from 0.037μs to 0.018μs.These results confirm that the proposed PCA-SG filtering algorithm effectively improves the smoothness of the ring-down curve data,demonstrating its feasibility.展开更多
基金Supported by the Guangdong-Hong Kong-Macao Joint Laboratory on Micro-Nano Manufacturing Technology,China(No.2021LSYS004)Guangdong Provincial Key Laboratory of Sustainable Biomimetic Materials and Green Energy,China(No.2024B1212010003)。
文摘Monitoring biogenic amines,which are metabolic byproducts of shrimp spoilage,is crucial for assessing food quality.Currently,most detection methods for biogenic amines suffer from limitations such as time-consuming procedures,complex operations,and delayed results.Colorimetric analysis techniques have gained attention in recent years due to their advantages of short analysis time,simple operation,and suitability for on-site testing.This study successfully developed a series of colorimetric sensor platforms for biogenic amines by loading the natural active ingredient curcumin(CUR)and its derivative of Boron complex BFCUR onto filter paper and electrospun nanofibre films(ENFs),respectively.By analyzing the color response differences of these sensors upon contact with biogenic amines,the colorimetric sensors with superior detection performance were selected and further applied to the visual monitoring and indication of shrimp spoilage processes.
基金the funding from Lembaga Penelitian dan Pengabdian Masyarakat(LPPM)Universitas Indonesia,by Riset Kolaborasi Indonesia(RKI)-World Class University(WCU)Program with grant number NKB-1067/UN2-RST/HKP.05.00/2023 and NKB-781/UN2.RST/HKP.05.00/2024.
文摘Detection of target analytes at low concentrations is significant in various fields,including pharmaceuticals,healthcare,and environmental protection.Theophylline(TP),a natural alkaloid used as a bronchodilator to treat respiratory disorders such as asthma,bronchitis,and emphysema,has a narrow therapeutic window with a safe plasma concentration ranging from 55.5-111.0μmol·L^(-1)in adults.Accurate monitoring of TP levels is essential because too low or too high can cause se-rious side effects.In this regard,non-enzymatic electrochemical sensors offer a practical solution with rapidity,portability,and high sensitivity.This article aims to provide a comprehensive review of the recent developments of non-enzymatic electrochemical sensors for TP detection,highlighting the basic principles,electro-oxidation mechanisms,catalytic effects,and the role of modifying materials on electrode performance.Carbon-based electrodes such as glassy carbon electrodes(GCEs),carbon paste electrodes(CPEs),and carbon screen-printed electrodes(SPCEs)have become the primary choices for non-enzymatic sensors due to their chemical stability,low cost,and flexibility in modification.This article identifies the sig-nificant contribution of various modifying materials,including nanomaterials such as carbon nanotubes(CNTs),graphene,metal oxides,and multi-element nanocomposites.These modifications enhance sensors’electron transfer,sensitivity,and selectivity in detecting TP at low concentrations in complex media such as blood plasma and pharmaceutical samples.The electro-oxidation mechanism of TP is also discussed in depth,emphasizing the hydroxyl and carbonyl reaction pathways strongly influenced by pH and electrode materials.These mechanisms guide the selection of the appropriate electrode ma-terial for a particular application.The main contribution of this article is to identify superior modifying materials that can improve the performance of non-enzymatic electrochemical sensors.In a recent study,the combination of multi-element nanocomposites based on titanium dioxide(TiO_(2)),CNTs,and gold nanoparticles(AuNPs)resulted in the lowest detection limit of 3×10^(-5)μmol·L^(-1),reflecting the great potential of these materials for developing high-performance electrochemical sensors.The main conclusion of this article is the importance of a multidisciplinary approach in electrode material design to support the sensitivity and selectivity of TP detection.In addition,there is still a research gap in understanding TP’s more detailed oxidation mechanism,especially under pH variations and complex environments.Therefore,further research on electrode modification and analysis of the TP oxidation mechanism are urgently needed to improve the accuracy and sta-bility of the sensor while expanding its applications in pharmaceutical monitoring and medical diagnostics.By integrating various innovative materials and technical approaches,this review is expected to be an essential reference for developing efficient and affordable non-enzymatic electrochemical sensors.
基金the National Natural Science Foundation of China (6070308360575033).
文摘In a measurement system, new representation methods are necessary to maintain the uncertainty and to supply more powerful ability for reasoning and transformation between numerical system and symbolic system. A grey measurement system is discussed from the point of view of intelligent sensors and incomplete information processing compared with a numerical and symbolized measurement system. The methods of grey representation and information processing are proposed for data collection and reasoning. As a case study, multi-ultrasonic sensor systems are demonstrated to verify the effectiveness of the proposed methods.
基金National Natural Science Foundation of China(Grant No.62101138)Shandong Natural Science Foundation(Grant No.ZR2021QD148)+1 种基金Guangdong Natural Science Foundation(Grant No.2022A1515012573)Guangzhou Basic and Applied Basic Research Project(Grant No.202102020701)for providing funds for publishing this paper。
文摘As positioning sensors,edge computation power,and communication technologies continue to develop,a moving agent can now sense its surroundings and communicate with other agents.By receiving spatial information from both its environment and other agents,an agent can use various methods and sensor types to localize itself.With its high flexibility and robustness,collaborative positioning has become a widely used method in both military and civilian applications.This paper introduces the basic fundamental concepts and applications of collaborative positioning,and reviews recent progress in the field based on camera,LiDAR(Light Detection and Ranging),wireless sensor,and their integration.The paper compares the current methods with respect to their sensor type,summarizes their main paradigms,and analyzes their evaluation experiments.Finally,the paper discusses the main challenges and open issues that require further research.
基金supported by the National Natural Science Foundation of China under(Grant No.52175531)in part by the Science and Technology Research Program of Chongqing Municipal Education Commission under Grant(Grant Nos.KJQN202000605 and KJZD-M202000602)。
文摘Pedestrian positioning system(PPS)using wearable inertial sensors has wide applications towards various emerging fields such as smart healthcare,emergency rescue,soldier positioning,etc.The performance of traditional PPS is limited by the cumulative error of inertial sensors,complex motion modes of pedestrians,and the low robustness of the multi-sensor collaboration structure.This paper presents a hybrid pedestrian positioning system using the combination of wearable inertial sensors and ultrasonic ranging(H-PPS).A robust two nodes integration structure is developed to adaptively combine the motion data acquired from the single waist-mounted and foot-mounted node,and enhanced by a novel ellipsoid constraint model.In addition,a deep-learning-based walking speed estimator is proposed by considering all the motion features provided by different nodes,which effectively reduces the cumulative error originating from inertial sensors.Finally,a comprehensive data and model dual-driven model is presented to effectively combine the motion data provided by different sensor nodes and walking speed estimator,and multi-level constraints are extracted to further improve the performance of the overall system.Experimental results indicate that the proposed H-PPS significantly improves the performance of the single PPS and outperforms existing algorithms in accuracy index under complex indoor scenarios.
基金Project(ZZYJKT2019-05)supported by State Key Laboratory of High Performance Complex Manufacturing,ChinaProject(51605497)supported by the National Natural Science Foundation of ChinaProject(2020CX05)supported by Innovation-Driven Project of Central South University,China。
文摘Conductive polymer composites(CPCs)are widely used in the flexible strain sensors due to their simple fabrication process and controllable sensing properties.However,temperature has a significance impact on the strain sensing performance of CPCs.In this paper,the strain sensing characteristics of MWCNTs/PDMS composites under temperature loading were systematically studied.It was found that the sensitivity decreased with the increase of temperature and the phenomenon of shoulder peak also decreased.Based on the theory of polymer mechanics,it was found that temperature could affect the conductive network by changing the motion degree of PDMS molecular chain,resulting in the change of sensing characteristics.Finally,a mathematical model of the resistance against loading condition(strain and temperature),associated with the force−electrical equivalent relationship of composites,was established to discuss the experimental results as well as the sensing mechanism.The results presented in this paper was believed helpful for the further application of strain sensors in different temperature conditions.
文摘Flower-liked SnO_2 nanorods were prepared by a hydrothermal method.The sensors were fabricated using SnO_2 nanorods adsorption of Au nanoparticles through sputtering deposition.We found that the loading of a small amount of Au nanoparticles on the surface of SnO_2 nanorods can effectively enhance and functionalize the gas sensing performance of SnO_2 nanorods,which due to the Au adsorption make the surface-depletion effect more pronounced.Such enhanced surface depletion increases the sensitivity,lowers the operation temperature and decreases the response time.
基金supported by the National Natural Science Foundation of China(Grant No.61973037)and(Grant No.61871414)Postdoctoral Fundation of China(Grant No.2022M720419)。
文摘The interrupted-sampling repeater jamming(ISRJ)can cause false targets to the radio-frequency proximity sensors(RFPSs),resulting in a serious decline in the target detection capability of the RFPS.This article proposes a recognition method for RFPSs to identify the false targets caused by ISRJ.The proposed method is realized by assigning a unique identity(ID)to each RFPS,and each ID is a periodically and chaotically encrypted in every pulse period.The processing technique of the received signal is divided into ranging and ID decryption.In the ranging part,a high-resolution range profile(HRRP)can be obtained by performing pulse compression with the binary chaotic sequences.To suppress the noise,the singular value decomposition(SVD)is applied in the preprocessing.Regarding ID decryption,targets and ISRJ can be recognized through the encryption and decryption processes,which are controlled by random keys.An adaptability analysis conducted in terms of the peak-to-side lobe ratio(PSLR)and bit error rate(BER)indicates that the proposed method performs well within a 70-k Hz Doppler shift.A simulation and experimental results show that the proposed method achieves extremely stable target and ISRJ recognition accuracies at different signal-to-noise ratios(SNRs)and jamming-to-signal ratios(JSRs).
基金Supported by Science & Engineering Research Council of Singnpore (0521010037)
文摘Wireless sensor network (WSN) of active sensors suffers from serious inter-sensor interference (ISI) and imposes new design and implementation challenges. In this paper, based on the ultrasonic sensor network, two time-division based distributed sensor scheduling schemes are proposed to deal with ISI by scheduling sensors periodically and adaptively respectively. Extended Kalman filter (EKF) is used as the tracking algorithm in distributed manner. Simulation results show that the adaptive sensor scheduling scheme can achieve superior tracking accuracy with faster tracking convergence speed.
文摘Sensors deployment optimization has become one of the most attractive fields in recent years. However, most of the previous work focused on the deployment problem in 2D space.Compared to the traditional form, sensors deployment in multidimensional space has greater research significance and practical potential to satisfy the detecting needs in complex environment.Aiming at solving this issue, a multi-dimensional space sensor network model is established, and the radar system is selected as an example. Considering the possible working mode of the radar system(e.g., searching and tracking), two distinctive deployment models are proposed based on maximum coverage area and maximum target detection probability in the attack direction respectively. The latter one is usually ignored in the previous literature.For uncovering the optimal deployment of the sensor network, the particle swarm optimization(PSO) algorithm is improved using the proposed weights determination scheme, in which the linear decreasing, the pooling strategy and the cloud theory are combined for weights updating. Experimental results illustrate the effectiveness of the proposed method.
基金supported by the Program for Changjiang Scholars and Innovative Research Team in University (IRT0645)
文摘A two-dimensional direction-of-arrival （DOA） and polarization estimation algorithm for coherent sources using a linear vector-sensor array is presented. Two matrices are first constructed by the receiving data. The ranks of the two matrices are only related to the DOAs of the sources and independent of their coherency. Then the source’s elevation is resolved via the matrix pencil （MP） method, and the singular value decomposition （SVD） is used to reduce the noise effect. Finally, the source’s steering vector is estimated, and the analytics solutions of the source’s azimuth and polarization parameter can be directly computed by using a vector cross-product estimator. Moreover, the proposed algorithm can achieve the unambiguous direction estimates, even if the space between adjacent sensors is larger than a half-wavelength. Theoretical and numerical simulations show the effectiveness of the proposed algorithm.
基金Project(2010-0020163)supported by Basic Science Research Program through the National Research Foundation(NRF)funded by the Ministry of Education of Korea
文摘The sensing performances of multiple networked Ga N nanowire(NW) sensor codecorated with Au and Pt nanoparticles were examined. The pristine Ga N nanowires show responses of approximately 108%-173% to 0.05%-0.25% H2 at room temperature. On the other hand, the Ga N nanowires decorated with Au and those decorated with Pt lead to 1.1-1.3 and 1.2-1.6 times,respectively, stronger responses to 0.05%-0.25% H2. In contrast, the Au Pt-codecorated Ga N nanowires show 1.3-2.0 times stronger responses to 0.05%-0.25% H2. In other words, the Ga N nanorods codecorated with Au and Pt nanoparticles show much stronger response to H2 gas than the Au or Pt monometal-decorated counterpart. The underlying mechanism for the enhanced response of the Au Pt-codecorated Ga N nanowire was discussed.
基金supported by the National Natural Science Foundation of China (60835001)
文摘Target tracking is one of the applications of wireless sensor networks(WSNs).It is assumed that each sensor has a limited range for detecting the presence of the object,and the network is sufficiently dense so that the sensors can cover the area of interest.Due to the limited battery resources of sensors,there is a tradeoff between the energy consumption and tracking accuracy.To solve this problem,this paper proposes an energy efficient tracking algorithm.Based on the cooperation of dispatchers,sensors in the area are scheduled to switch their working mode to track the target.Since energy consumed in active mode is higher than that in monitoring or sleeping mode,for each sampling interval,a minimum set of sensors is woken up based on the select mechanism.Meanwhile,other sensors keep in sleeping mode.Performance analysis and simulation results show that the proposed algorithm provides a better performance than other existing approaches.
文摘This research is dedicated to develop a safety measurement for human-machine cooperative system, in which the machine region and the human region cannot be separated due to the overlap and the movement both from human and from machines. Our proposal here is to automatically monitor the moving objects by image sensing/recognition method, such that the machine system can get enough information about the environment situation and about the production progress at any time, and therefore the machines can accordingly take some corresponding actions automatically to avoid hazard. For this purpose, two types of monitor systems are proposed. The first type is based on the omni directional vision sensor, and the second is based on the stereo vision sensor. Each type may be used alone or together with another type, depending on the safety system's requirements and the specific situation of the manufacture field to be monitored. In this paper, the description about these two types are given, and as for the special application of these image sensors into safety control, the construction of a hierarchy safety system is proposed.
基金Projects(U1334205,51205418)supported by the National Natural Science Foundation of ChinaProject(2014T002-A)supported by the Science and Technology Research Program of China Railway CorporationProject(132014)supported by the Fok Ying Tong Education Foundation of China
文摘In order to consider the influence of steel pole on the measurement of wind speed sensors and determinate the installation position of wind speed sensors, the flow field around wind speed sensors was investigated. Based on the three-dimensional steady Reynolds-averaged Navier-Stokes equations and k-ε double equations turbulent model, the field flow around the wind speed sensor and the steel pole along a high-speed railway was simulated on an unstructured grid. The grid-independent validation was conducted and the accuracy of the present numerical simulation method was validated by experiments and simulations carried out by previous researchers. Results show that the steel pole has a significant influence on the measurement results of wind speed sensors. As the distance between two wind speed sensors is varied from 0.3 to 1.0 m, the impact angles are less than ±20°, it is proposed that the distance between two wind speed sensors is 0.8 m at least, and the interval between wind speed sensors and the steel pole is more than 1.0 m with the sensors located on the upstream side.
基金financial support from the National Natural Science Foundation of China(Grant No.21801016)the Science and Technology on Applied Physical Chemistry Laboratory(Grant No.6142602220304)。
文摘In order to achieve a wider range of ionizing radiations detection,novel fluorescence sensing materials have been developed that utilize the fluorescence enhancement phenomenon caused by the intramolecular photoinduced electron transfer(PET)effect.Two perylene diimide isomers PDI-P and PDI-B were designed and synthesized,and their molecular structures were characterized by high-resolution Fourier transform mass spectrometry(HRMS),nuclear magnetic resonance hydrogen and carbon spectroscopy(~1H and~(13)C NMR).The interaction between ionizing radiation and fluorescent molecules was simulated by HCl titration.The results show that combining PDIs and HCl can improve fluorescence through the retro-PET process.Despite the similarities in chemical structures,the fluorescent enhancement multiple of PDI-B with aromatic amine as electron donor is much higher than that of PDI-P with alkyl amine.In the direct irradiation experiments of ionizing radiation,the emission enhancement multiples of PDI-P and PDI-B are 2.01 and 45.4,respectively.Furthermore,density functional theory(DFT)and time-dependent density functional theory(TDDFT)calculations indicate that the HOMO and HOMO-1 energy ranges of PDI-P and PDI-B are 0.54 e V and 1.13 e V,respectively.A wider energy range has a stronger driving force on electrons,which is conducive to fluorescence quenching.Both femtosecond transient absorption spectroscopy(fs-TAS)and transient fluorescence spectroscopy(TFS)tests show that PDI-B has shorter charge separation lifetime and higher electron transfer rate constant.Although both isomers can significantly reduce LOD during PET process,PDI-B with aromatic amine has a wider detection range of 0.118—240 Gy due to its larger emission enhancement,which is a leap of three orders of magnitude.It breaks through the detection range of gamma radiation reported in existing studies,and provides theoretical support for the further study of sensitive and effective new materials for ionizing radiation detection.
基金Sponsored by the National Natural Science Foundation of China (60773129)the Excellent Youth Science and Technology Foundation of Anhui Province of China ( 08040106808)
文摘A novel classification algorithm based on abnormal magnetic signals is proposed for ground moving targets which are made of ferromagnetic material. According to the effect of diverse targets on earth's magnetism,the moving targets are detected by a magnetic sensor and classified with a simple computation method. The detection sensor is used for collecting a disturbance signal of earth magnetic field from an undetermined target. An optimum category match pattern of target signature is tested by training some statistical samples and designing a classification machine. Three ordinary targets are researched in the paper. The experimental results show that the algorithm has a low computation cost and a better sorting accuracy. This classification method can be applied to ground reconnaissance and target intrusion detection.
基金supported by the Beijing Natural Science Foundation(Grant No.3252013)the Innovation Program for Quantum Science and Technology(Grant No.2021ZD0300402)+1 种基金the National Natural Science Foundation of China(Grant No.61673041)Key Area Research and Development Program of Guangdong Province(Grant No.2021B0101410005)。
文摘Atomic spin gyroscopes are promising candidates for next-generation inertial navigation due to extremely high theoretical precision,relatively small size among atomic gyroscopes,and promising potential for miniaturization.In particular,the spin-exchange relaxation-free(SERF)atomic gyroscope relies on optical pumping to polarize atoms,enabling rotation sensing through the Faraday optical rotation angle(FORA).However,fluctuations in atomic density introduce systematic errors in FORA measurements,limiting long-term stability.We present a data-driven decoupling method that isolates atomic density fluctuations from the FORA signal by modeling spatially resolved light absorption in the vapor cell.The model accounts for the spatial distribution of spin polarization in the pump-light interaction volume,density-dependent relaxation rates,wall-induced relaxation,and polarization diffusion,and is implemented within a finite-element framework.Compared to the conventional Lambert-Beer law,which assumes one-dimensional homogeneity,our approach captures the full threedimensional density and polarization distribution,significantly improving the accuracy of light absorption modeling.The resulting absorption-density maps are used to train a feedforward neural network,yielding a high-precision estimator for atomic density fluctuations.This estimator enables the construction of a decoupling equation that separates the density contribution from the FORA signal.Experimental validation shows that this method improves the bias instability atσ(100 s)of the gyroscope was improved by 73.1%compared to traditional platinum-resistance-based stabilization.The proposed framework is general and can be extended to other optical pumping-based sensors,such as optically pumped magnetometers.
文摘The Savitzky-Golay(SG)filter,which employs polynomial least-squares approximations to smooth data and estimate derivatives,is widely used for processing noisy data.However,noise suppression by the SG filter is recognized to be limited at data boundaries and high frequencies,which can significantly reduce the signal-to-noise ratio(SNR).To solve this problem,a novel method synergistically integrating Principal Component Analysis(PCA)with SG filtering is proposed in this paper.This approach avoids the is-sue of excessive smoothing associated with larger window sizes.The proposed PCA-SG filtering algorithm was applied to a CO gas sensing system based on Cavity Ring-Down Spectroscopy(CRDS).The perform-ance of the PCA-SG filtering algorithm is demonstrated through comparison with Moving Average Filtering(MAF),Wavelet Transformation(WT),Kalman Filtering(KF),and the SG filter.The results demonstrate that the proposed algorithm exhibits superior noise reduction capabilities compared to the other algorithms evaluated.The SNR of the ring-down signal was improved from 11.8612 dB to 29.0913 dB,and the stand-ard deviation of the extracted ring-down time constant was reduced from 0.037μs to 0.018μs.These results confirm that the proposed PCA-SG filtering algorithm effectively improves the smoothness of the ring-down curve data,demonstrating its feasibility.
