Based on Bingham rheological model,a three-dimensional numerical simulation model for long-distance pipeline transportation is established by computational fluid dynamics(CFD)to study the pipeline transportationproper...Based on Bingham rheological model,a three-dimensional numerical simulation model for long-distance pipeline transportation is established by computational fluid dynamics(CFD)to study the pipeline transportationproperties of high sliming paste from a copper mine in China.Based on the rheological properties test,the pressure and velocity of pipeline and elbow are simulated by CFD under different mass concentrations and different stowing capacities.The results show that the pipeline resistance of whole-tailings paste with high sliming while without pumping agent is much higher than that with high sliming and pumping agent at the same mass concentration,and the pipeline resistance of whole-tailings paste with high sliming while without pumping agent is much higher than that with low sliming while without pumping agent.It is very important to add pumping agent to whole-tailings paste with high sliming,and the resistance changes with mass concentration and stowing capacity at the same cement-to-sand ratio of1:5and tailings-to-waste ratio of6:1.However,the change is just limited,that is to say,the paste transportation system is of good stability.Furthermore,at the elbow,the maximum pressure and velocity transfer to the outside of the pipe from the inside.However,lubricating layer is formed at the pipe wall because of high content of fine particles in whole-tailings paste,which will protect the elbow from abrasion.CFD provides an intuitive and accurate basis for pipeline transportation study,and would have a wider application space in the study of paste rheological properties and resistance reduction methods.展开更多
The mechanical properties of cemented paste backfill(CPB) depend heavily on its pore structural characteristics and micro-structural changes. In order to explore the variation mechanisms of macro-mechanical characteri...The mechanical properties of cemented paste backfill(CPB) depend heavily on its pore structural characteristics and micro-structural changes. In order to explore the variation mechanisms of macro-mechanical characteristics and micro-structure of CPB. CPB specimens with different mass concentrations prepared from the full tailings of Xianglushan Tungsten Ore were micro-tests. Moreover, acquired pore digital images were processed by using the pores(particles) and cracks analysis system(PCAS), and a sensitivity analysis was performed. The results show that as the mass concentration of CPB increases from 70% to 78%, the porosity, the average pore area and the number of pores drop overall, leading to a decline in the pores opening degree and enhancing the mechanical characteristics. As the mass concentration of CPB increases, the trend of fractal dimension, probability entropy and roundness is reduced, constant and increased, which can result in an enhancement of the uniformity, an unchanged directionality and more round pores. According to the definition of sensitivity, the sensitivities of various micro-parameters were calculated and can be ranked as porosity > average pore area > number of pores > roundness > fractal dimension > probability entropy.展开更多
Hydration shrinkage generated by cement hydration is the cause of autogenous shrinkage of high strength concrete. It may result in the volume change and even cracking of mortar and concrete. According to the data anal...Hydration shrinkage generated by cement hydration is the cause of autogenous shrinkage of high strength concrete. It may result in the volume change and even cracking of mortar and concrete. According to the data analysis in a series of experimental studies, the influence of ultra-fine fly ash on the hydration shrinkage of composite cementitious materials was investigated. It is found that ultra-fine fly ash can reduce the hydration shrinkage of cement paste effectively, and the more the ultra-fine fly ash, the less the hydration shrinkage. Compared with cement paste without the ultra-fine fly ash, the shrinkage ratio of cement paste reduces from 23.4% to 39.7% when the ultra-fine fly ash replaces cement from 20% to 50%. Moreover, the microscopic mechanism of the ultra-fine fly ash restraining the hydration shrinkage was also studied by scanning electron microscopy, X-ray diffraction and hydrated equations. The results show that the hydration shrinkage can be restrained to a certain degree because the ultra-fine fly ash does not participate in the hydration at the early stage and the secondary hydration products are different at the later stage.展开更多
The initial shear stress and plastic cohesion ( η ) are the most important parameters reflecting the rheological properties of the paste slurry. The rheological parameters as well as the quantitative relationship amo...The initial shear stress and plastic cohesion ( η ) are the most important parameters reflecting the rheological properties of the paste slurry. The rheological parameters as well as the quantitative relationship among the consumption of different fill materials were obtained through the experiment and research on these parameters. They can be used to predict the scope of the values of τ and η in production for a given ratio, which can reduce the conveying resistance of fill slurry along the pipelines and avoid the blockage of the pipelines. It is found that the rheological model of the total tailing slurry belongs to the Bingham type, which has a feature of strong internal structure and large initial shear stress. The calculation formula for the resistance loss of pipelines conforms nicely to the field test and the actual production in Jinchuan Nickel Mine.展开更多
To understand the effect of steam curing temperature on the hydrate and microstructure of hardened cement paste,several measuring methods including X-ray diffraction(XRD),atomic absorption spectroscopy(ASS),ion chroma...To understand the effect of steam curing temperature on the hydrate and microstructure of hardened cement paste,several measuring methods including X-ray diffraction(XRD),atomic absorption spectroscopy(ASS),ion chromatography,conductivity meter,alternating-current impedance spectroscopy and nuclear magnetic resonance(NMR)are employed to investigate the hydration characteristics,pore solution composition and conductivity,resistivity and pore structure during the steam curing process.Experimental results show that steam curing promotes the hydration process,greatly raises the resistivity,and decreases the porosity of specimen at early age.Compared with being treated at 45℃,higher temperature leads to a fast decomposition of ettringite at initial stage of the constant temperature treatment period,which improves the relative content and ionic activity of the conductive ions in pore solution.Furthermore,the number of pores larger than 200 nm increases significantly,which reduces the resistivity of the hardened cement paste.Cement paste treated at 45℃ has a more stable and denser microstructure with less damages.展开更多
Superplasticizers are widely used to reduce the pipe flow resistance of cemented paste backfill(CPB), which is characterised by high concentration and high yield stress. This study aimed to assess the time-dependent r...Superplasticizers are widely used to reduce the pipe flow resistance of cemented paste backfill(CPB), which is characterised by high concentration and high yield stress. This study aimed to assess the time-dependent rheological properties of CPB containing superplasticizer, with special focus on static yield stress and thixotropy. The results indicate that with the increase of the superplasticizer dosage, the static yield stress, dynamic yield stress and thixotropy of CPB decreased significantly, while the plastic viscosity decreased slightly. The curing time has a significant effect on the static yield stress, dynamic yield stress and thixotropy of CPB containing superplasticizer, which increase by 46.6%-87.1%,15.2%-35.6% and 79.4%-138.2%, respectively, within 2 h. The static yield stress, dynamic yield stress and thixotropy of CPB without superplasticizer only increase by 4.9%, 6.3% and 16.1%, respectively, within 2 h. The curing time has a significant influence on the plastic viscosity of CPB regardless of superplasticizer addition, the plastic viscosity increases by 13.2%-19.7% within 2 h. Regardless of superplasticizer dosage, plotting of both static yield stress and dynamic yield stress versus thixotropy produces clearly linear curves. The findings of this study are conducive to the design of pipe transportation of CPB containing superplasticizer.展开更多
The strength of cement-based materials,such as mortar,concrete and cement paste backfill(CPB),depends on its microstructures(e.g.pore structure and arrangement of particles and skeleton).Numerous studies on the relati...The strength of cement-based materials,such as mortar,concrete and cement paste backfill(CPB),depends on its microstructures(e.g.pore structure and arrangement of particles and skeleton).Numerous studies on the relationship between strength and pore structure(e.g.,pore size and its distribution)were performed,but the micro-morphology characteristics have been rarely concerned.Texture describing the surface properties of the sample is a global feature,which is an effective way to quantify the micro-morphological properties.In statistical analysis,GLCM features and Tamura texture are the most representative methods for characterizing the texture features.The mechanical strength and section image of the backfill sample prepared from three different solid concentrations of paste were obtained by uniaxial compressive strength test and scanning electron microscope,respectively.The texture features of different SEM images were calculated based on image analysis technology,and then the correlation between these parameters and the strength was analyzed.It was proved that the method is effective in the quantitative analysis on the micro-morphology characteristics of CPB.There is a significant correlation between the texture features and the unconfined compressive strength,and the prediction of strength is feasible using texture parameters of the CPB microstructure.展开更多
In this study,different influence mechanisms associated with temperatures and pH values were investigated through cemented paste backfill(CPB)systems.CPB samples were prepared with temperatures ranging from 10 to 50℃...In this study,different influence mechanisms associated with temperatures and pH values were investigated through cemented paste backfill(CPB)systems.CPB samples were prepared with temperatures ranging from 10 to 50℃ in 10℃ increments and pH values of 3,7,and 13.Then,the CPB mixture were subjected to rheological tests,thermogravimetric analysis(TG),derivative thermogravimetry analysis(DTG),Fourier-transform infrared spectroscopy(FT-IR),and scanning electron microscopy(SEM).Results demonstrated that the temperatures had significant effects on the rheological properties of CPB,whereas the effects of pH values were relatively unapparent.Higher temperatures(over 20℃)were prone to bring higher shear stress,yield stress,and apparent viscosity with the same pH value condition.However,an overly high temperature(50℃)cannot raise the apparent viscosity.Non-neutral conditions,for pH values of 3 and 13,could strengthen the shear stress and apparent viscosity at the same temperature.Two different yield stress curves could be discovered by uprising pH values,which also led to apparent viscosity of two various curves under the same temperatures(under 50℃).Microscopically,rheological properties of CPB were affected by temperatures and pH values which enhanced or reduced the cement hydration procedures,rates,products and space structures.展开更多
An improved design method of pervious concrete was proposed to lower the deviation between the designed and actual porosity and maintain both mechanical property and permeability of pervious concrete. The improved des...An improved design method of pervious concrete was proposed to lower the deviation between the designed and actual porosity and maintain both mechanical property and permeability of pervious concrete. The improved design method is mainly based on the optimal volume ratio of paste to aggregate(VRPA), which was determined by testing the average thickness of cement paste coating aggregate. The performances of pervious concrete designed by the traditional method and the improved one were compared. The results show that with the increase of designed porosity, the reduction of compressive strength and flexural strength of pervious concrete designed by the improved method is significantly smaller than those designed by the traditional one. The maximum deviation between the designed and actual porosity of the pervious concrete by the improved method is only 1.54%, which is far less than 8.7% obtained by the traditional one. Micro-structural analysis shows that the porous distribution of pervious concrete designed by improved method exhibits better uniformity.展开更多
With the gradual depletion of available ore at shallow depth,deep mines have been widely operated around the world and therefore need a longer distance to transport the backfill to the underground stope.In this case,t...With the gradual depletion of available ore at shallow depth,deep mines have been widely operated around the world and therefore need a longer distance to transport the backfill to the underground stope.In this case,the determination of pressure drop is more important in the pipeline transportation system design.As the pilot loop systems require a large amount of capital and manual investment,even its results are reliable,there is an urgent need to find an alternative simple and cost-saving method to determine the pressure drop.Hence,laboratory L-pipe and a pilot-loop tests were employed to study the flow properties of cemented paste backfill cured at various solid and binder content.The results indicate that the L-pipe test presented a similar trend to the loop test,but the L-pipe was characterized by higher pressure drop values for various solid and cement contents.As cement content increased beyond 0%,the paste in the L-pipe showed a slighter difference in pressure drop evolution compared to the paste in the loop-pipe.These results suggest that the simple L-pipe is a workable substitute for semi-industrial loop tests and can provide guidance for designing practical CPB pipeline systems in deep mines.展开更多
Micro computed tomography (Micro-CT) was applied to obtain three-dimensional images of the microstructure of cement paste (water-to-cement mass ratio of 0.5) at different ages. By using the Amira software, component p...Micro computed tomography (Micro-CT) was applied to obtain three-dimensional images of the microstructure of cement paste (water-to-cement mass ratio of 0.5) at different ages. By using the Amira software, component phases of the cement paste such as pores, hydration products, and unhydrated clinker particles were segmented from each other based on their 3D image grey levels; their relative contents were also calculated with the software, and the data are 61.2%, 0% and 38.8% at the beginning of hydration and 11.8%, 78.5% and 9.7% at 28 d age, respectively. The hydration degree of cement paste at different ages was compared with the experimental data acquired by loss on ignition (LOI) tests. The results show that the calculated and measured data reasonably agree with each other, which indicates that micro-CT is a useful and reliable approach to characterize the micro structure evolution of hydrating cement paste.展开更多
For the resource utilization of the solid waste coking sulfur paste and the improvement of performance of the asphalt mixture,a method for preparing modified asphalt mixture with coking sulfur paste modifier(CSPM)is h...For the resource utilization of the solid waste coking sulfur paste and the improvement of performance of the asphalt mixture,a method for preparing modified asphalt mixture with coking sulfur paste modifier(CSPM)is herein proposed.Compared with the matrix asphalt mixture,the Marshall stability of the 30%CSPM modified asphalt mixture increased by 38.3%,the dynamic stability increased by nearly one time(reaching 1847.5 times/mm),the splitting strength ratio increased by 39.3%while the splitting tensile strength decreased by 11.7%.After curing,the performance of the CSPM modified asphalt mixture was further improved.The results show that CSPM improved the high temperature stability and water damage resistance of the asphalt mixture,and the low-temperature anti-cracking performance of that was slightly reduced.Chemical analysis of asphalt binders shows that a little sulfur reacted with asphalt to produce polysulfide compounds(R-Sx-R′),and a part of sulfur existed in the form of crystalline sulfur which was further increased after curing.The presence of crystalline sulfur as an inorganic filler is the key point for improving the high temperature stability and water resistance performance of modified asphalt mixture.展开更多
Tests were carried out on 8 self-compacting reinforced concrete(SCC) beams and 4 normal reinforced concrete beams. The effects of mode of consolidation,load level,reinforcing ratio and structural type on long term beh...Tests were carried out on 8 self-compacting reinforced concrete(SCC) beams and 4 normal reinforced concrete beams. The effects of mode of consolidation,load level,reinforcing ratio and structural type on long term behavior of SCC were investigated. Under the same environmental conditions,the shrinkage-time curve of self-compacting concrete beam is very similar to that of normal concrete beam. For both self-compacting reinforced concrete beams and normal reinforced concrete beams,the rate of shrinkage at early stages is higher,the shrinkage strain at 2 months is about 60% of the maximum value at one year. The shrinkage strain of self-compacting reinforced concrete beam after one year is about 450×10-6. Creep deflection of self-compacting reinforced concrete beam decreases as the tensile reinforcing ratio increases. The deflection creep coefficient of self-compacting reinforced concrete beam after one and a half year is about 1.6,which is very close to that of normal reinforced concrete beams cast with vibration. Extra cautions considering shrinkage and creep behavior are not needed for the use of SCC in engineering practices.展开更多
A series of compression tests were conducted on 150 groups of cement paste specimens with side lengths ranging from 40 mm to 200 mm. The specimens include cube specimens and prism specimens with height to width ratio ...A series of compression tests were conducted on 150 groups of cement paste specimens with side lengths ranging from 40 mm to 200 mm. The specimens include cube specimens and prism specimens with height to width ratio of 2. The experiment results show that size effect exists in the cubic compressive strength and prismatic compressive strength of the cement paste, and larger specimens resist less in terms of strength than smaller ones. The cubic compressive strength and the prismatic compressive strength of the specimens with side length of 200 mm are respectively about 91% and 89% of the compressive strength of the specimens with the side length of 40 mm. Water to binder ratio has a significant influence on the size effect of the compressive strengths of the cement paste. With a decrease in the water to binder ratio, the size effect is significantly enhanced. When the water to binder ratio is 0.2, the size effects of the cubic compressive strength and the prismatic compressive strength of the cement paste are 1.6 and 1.4 times stronger than those of a water to binder ratio of 0.6. Furthermore, a series of formulas are proposed to calculate the size effect of the cubic compressive strength and the prismatic compressive strength of cement paste, and the results of the size effect predicted by the formulas are in good agreement with the experiment results.展开更多
The preparation of lead-free thick-film resistors are reported:using RuO 2 and ruthenates as conductive particles,glass powders composed of B 2 O 3,SiO 2,CaO and Al2 O 3 as insulating phase,adding organic matter which...The preparation of lead-free thick-film resistors are reported:using RuO 2 and ruthenates as conductive particles,glass powders composed of B 2 O 3,SiO 2,CaO and Al2 O 3 as insulating phase,adding organic matter which mainly consists of ethyl cellulose and terpineol to form printable pastes.Resistors were fabricated and sintered by conventional screen-printing on 96%Al 2 O 3 substrates,and then sintering in a belt furnace.X-ray diffraction(XRD) and electron scanning microscopy(SEM) have been used to characterize the conductive particles.The resistors exhibit good refiring stability and low temperature coefficient of resistance.Sheet resistance spans from about 80Ω/□ to 600Ω/□.The resistors prepared are qualified for common use.展开更多
Cracks easily generate in concrete at early age owing to the shrinkage deformation.CaO-based expansion agent(CEA)and superabsorbent polymers(SAP)have been extensively used for the mitigation of concrete shrinkage.The ...Cracks easily generate in concrete at early age owing to the shrinkage deformation.CaO-based expansion agent(CEA)and superabsorbent polymers(SAP)have been extensively used for the mitigation of concrete shrinkage.The macroscopic properties of concrete are highly determined by the microstructure.In this study,the influence of CEA and SAP addition on the pore structure evolution of cement paste under different curing temperatures was evaluated via low-field nuclear magnetic resonance spectroscopy.Test results indicated that,in cement paste,a higher CEA content led to a higher porosity and a larger most probable pore diameter(MPPD).Meanwhile,SAP addition increased the porosity and MPPD of CEA cement paste at early age but decreased them after 7 d,and a higher SAP content always brought a higher porosity and MPPD.Furthermore,the addition of SAP led to a lower porosity and MPPD of CEA cement paste than that of plain cement paste after 14 d.Moreover,the porosity and MPPD of CEA cement paste decreased first and subsequently increased as the curing temperature raised.展开更多
The early-age thermal cracking easily generates and severely impairs the durability of concrete.The temperature rising inhibitor(TRI)was utilized to regulate the temperature evolution by controlling the cement hydrati...The early-age thermal cracking easily generates and severely impairs the durability of concrete.The temperature rising inhibitor(TRI)was utilized to regulate the temperature evolution by controlling the cement hydration process.This paper aimed to investigate the pore structure formation and hydration characteristics of cement paste containing TRI by low-field nuclear magnetic resonance.The experiment showed that the T_(2) peak of cement paste shifted from 7.32 ms to 0.23 ms regardless of TRI addition.But the pattern of pore structure formation was changed with TRI addition,that is,the pore structure formation was delayed,and the pore successively shifted to left in two parts.In addition,TRI addition significantly prolonged the duration of gel pore formation and greatly decreased the increase rate of gel water,which implied that TRI introduction hindered the growth of C-S-H,and subsequently decreased the hydration rates and delayed the main hydration peak.Meanwhile,TRI dissolved and diffused rapidly at 40℃,delaying the hydration of cement paste seriously.Moreover,TRI brought about the C-S-H nucleation homogeneous and the ion concentration uniform,which might reduce the localized curvature occurring on the sheet of C-S-H,and then decreased the T_(2) intensity of capillary water and gel water.展开更多
有机肥部分替代化肥是一种实现化肥减量的可持续农业生产措施。本研究于2020和2021连续2年以“沁黄2号”为供试材料,设不施氮(CK)、常量化肥氮(NPK)、有机肥替代25%化肥氮(25%M)、有机肥替代50%化肥氮(50%M)、有机肥替代75%化肥氮(75%M...有机肥部分替代化肥是一种实现化肥减量的可持续农业生产措施。本研究于2020和2021连续2年以“沁黄2号”为供试材料,设不施氮(CK)、常量化肥氮(NPK)、有机肥替代25%化肥氮(25%M)、有机肥替代50%化肥氮(50%M)、有机肥替代75%化肥氮(75%M)和有机肥替代100%化肥氮(100%M) 6个处理,研究不同替代率对谷子产量构成和氮素吸收的影响,并分析氮素吸收调控小米米色、糊化特性和类胡萝卜素组分的效应,明确谷子生产中有机肥最佳替代率。结果表明,2年中较低的有机肥替代化肥氮率显著提高了谷子植株氮素累积,但随着替代率的持续增加,植株氮素累积量呈降低趋势,最终影响谷子产量和小米品质。2020年, 25%M处理显著提高了谷子地上部氮素累积量,较NPK处理提高9.6%;2021年,25%M处理谷子地上部氮素累积量、生物量、穗粒数和产量达到最高,较NPK处理分别提高6.1%、12.0%、15.4%和12.0%。50%M处理显著影响了小米的米色、糊化特征和类胡萝卜素含量,与NPK相比,小米籽粒红绿值、橘色值、支链淀粉含量、总淀粉含量、小米糊化最终黏度、叶黄素含量、玉米黄质含量和黄色素含量的增幅分别可达6.0%、6.0%、7.4%、4.3%、7.8%、20.7%、17.4%和2.8%。但有机肥完全替代化肥降低了谷子地上部氮素吸收、地上部生物量、穗粒数及谷子产量,也抑制了小米叶黄素和玉米黄质含量的提升。2年均表现出谷子地上部氮吸收量与小米单粒重、直链淀粉含量和小米糊化回升值呈显著的负相关。且2021年谷子地上部氮吸收量还与小米总淀粉含量、蛋白质含量、小米粉糊化峰值黏度和小米黄色素含量呈显著的负相关,与小米糊化峰谷黏度呈显著的正相关。综上,施氮总量120 kg hm^(–2)下,有机肥替代25%~50%化肥氮能通过促进植株氮素的吸收,实现产量、米色、蒸煮特性及类胡萝卜素的协同提升,为谷子化肥减量和提质增效生产提供技术支撑。展开更多
基金Project(2016YFC0600709)supported by the National Key R&D Program of ChinaProject(51574013)supported by the National Natural Science Foundation of ChinaProject(FRF-TP-17-024A1)supported by the Fundamental Research Funds for the Central Universities,China
文摘Based on Bingham rheological model,a three-dimensional numerical simulation model for long-distance pipeline transportation is established by computational fluid dynamics(CFD)to study the pipeline transportationproperties of high sliming paste from a copper mine in China.Based on the rheological properties test,the pressure and velocity of pipeline and elbow are simulated by CFD under different mass concentrations and different stowing capacities.The results show that the pipeline resistance of whole-tailings paste with high sliming while without pumping agent is much higher than that with high sliming and pumping agent at the same mass concentration,and the pipeline resistance of whole-tailings paste with high sliming while without pumping agent is much higher than that with low sliming while without pumping agent.It is very important to add pumping agent to whole-tailings paste with high sliming,and the resistance changes with mass concentration and stowing capacity at the same cement-to-sand ratio of1:5and tailings-to-waste ratio of6:1.However,the change is just limited,that is to say,the paste transportation system is of good stability.Furthermore,at the elbow,the maximum pressure and velocity transfer to the outside of the pipe from the inside.However,lubricating layer is formed at the pipe wall because of high content of fine particles in whole-tailings paste,which will protect the elbow from abrasion.CFD provides an intuitive and accurate basis for pipeline transportation study,and would have a wider application space in the study of paste rheological properties and resistance reduction methods.
基金Projects(51674188,51874229,51504182)supported by the National Natural Science Foundation of ChinaProject(2018KJXX-083)supported by Shaanxi Innovative Talents Cultivate Program-New-star Plan of Science and Technology,China
文摘The mechanical properties of cemented paste backfill(CPB) depend heavily on its pore structural characteristics and micro-structural changes. In order to explore the variation mechanisms of macro-mechanical characteristics and micro-structure of CPB. CPB specimens with different mass concentrations prepared from the full tailings of Xianglushan Tungsten Ore were micro-tests. Moreover, acquired pore digital images were processed by using the pores(particles) and cracks analysis system(PCAS), and a sensitivity analysis was performed. The results show that as the mass concentration of CPB increases from 70% to 78%, the porosity, the average pore area and the number of pores drop overall, leading to a decline in the pores opening degree and enhancing the mechanical characteristics. As the mass concentration of CPB increases, the trend of fractal dimension, probability entropy and roundness is reduced, constant and increased, which can result in an enhancement of the uniformity, an unchanged directionality and more round pores. According to the definition of sensitivity, the sensitivities of various micro-parameters were calculated and can be ranked as porosity > average pore area > number of pores > roundness > fractal dimension > probability entropy.
文摘Hydration shrinkage generated by cement hydration is the cause of autogenous shrinkage of high strength concrete. It may result in the volume change and even cracking of mortar and concrete. According to the data analysis in a series of experimental studies, the influence of ultra-fine fly ash on the hydration shrinkage of composite cementitious materials was investigated. It is found that ultra-fine fly ash can reduce the hydration shrinkage of cement paste effectively, and the more the ultra-fine fly ash, the less the hydration shrinkage. Compared with cement paste without the ultra-fine fly ash, the shrinkage ratio of cement paste reduces from 23.4% to 39.7% when the ultra-fine fly ash replaces cement from 20% to 50%. Moreover, the microscopic mechanism of the ultra-fine fly ash restraining the hydration shrinkage was also studied by scanning electron microscopy, X-ray diffraction and hydrated equations. The results show that the hydration shrinkage can be restrained to a certain degree because the ultra-fine fly ash does not participate in the hydration at the early stage and the secondary hydration products are different at the later stage.
文摘The initial shear stress and plastic cohesion ( η ) are the most important parameters reflecting the rheological properties of the paste slurry. The rheological parameters as well as the quantitative relationship among the consumption of different fill materials were obtained through the experiment and research on these parameters. They can be used to predict the scope of the values of τ and η in production for a given ratio, which can reduce the conveying resistance of fill slurry along the pipelines and avoid the blockage of the pipelines. It is found that the rheological model of the total tailing slurry belongs to the Bingham type, which has a feature of strong internal structure and large initial shear stress. The calculation formula for the resistance loss of pipelines conforms nicely to the field test and the actual production in Jinchuan Nickel Mine.
基金Projects(U1534207,11790283,51878583)supported by the National Natural Science Foundation of China。
文摘To understand the effect of steam curing temperature on the hydrate and microstructure of hardened cement paste,several measuring methods including X-ray diffraction(XRD),atomic absorption spectroscopy(ASS),ion chromatography,conductivity meter,alternating-current impedance spectroscopy and nuclear magnetic resonance(NMR)are employed to investigate the hydration characteristics,pore solution composition and conductivity,resistivity and pore structure during the steam curing process.Experimental results show that steam curing promotes the hydration process,greatly raises the resistivity,and decreases the porosity of specimen at early age.Compared with being treated at 45℃,higher temperature leads to a fast decomposition of ettringite at initial stage of the constant temperature treatment period,which improves the relative content and ionic activity of the conductive ions in pore solution.Furthermore,the number of pores larger than 200 nm increases significantly,which reduces the resistivity of the hardened cement paste.Cement paste treated at 45℃ has a more stable and denser microstructure with less damages.
基金Project(51834001)supported by the National Natural Science Fundation of ChinaProject(N2101043)supported by the Fundamental Research Funds for the Central Universities of China。
文摘Superplasticizers are widely used to reduce the pipe flow resistance of cemented paste backfill(CPB), which is characterised by high concentration and high yield stress. This study aimed to assess the time-dependent rheological properties of CPB containing superplasticizer, with special focus on static yield stress and thixotropy. The results indicate that with the increase of the superplasticizer dosage, the static yield stress, dynamic yield stress and thixotropy of CPB decreased significantly, while the plastic viscosity decreased slightly. The curing time has a significant effect on the static yield stress, dynamic yield stress and thixotropy of CPB containing superplasticizer, which increase by 46.6%-87.1%,15.2%-35.6% and 79.4%-138.2%, respectively, within 2 h. The static yield stress, dynamic yield stress and thixotropy of CPB without superplasticizer only increase by 4.9%, 6.3% and 16.1%, respectively, within 2 h. The curing time has a significant influence on the plastic viscosity of CPB regardless of superplasticizer addition, the plastic viscosity increases by 13.2%-19.7% within 2 h. Regardless of superplasticizer dosage, plotting of both static yield stress and dynamic yield stress versus thixotropy produces clearly linear curves. The findings of this study are conducive to the design of pipe transportation of CPB containing superplasticizer.
基金Project(51722401)supported by the National Natural Science Foundation for Excellent Young Scholars of ChinaProject(FRF-TP-18-003C1)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(51734001)supported by the Key Program of National Natural Science Foundation of China
文摘The strength of cement-based materials,such as mortar,concrete and cement paste backfill(CPB),depends on its microstructures(e.g.pore structure and arrangement of particles and skeleton).Numerous studies on the relationship between strength and pore structure(e.g.,pore size and its distribution)were performed,but the micro-morphology characteristics have been rarely concerned.Texture describing the surface properties of the sample is a global feature,which is an effective way to quantify the micro-morphological properties.In statistical analysis,GLCM features and Tamura texture are the most representative methods for characterizing the texture features.The mechanical strength and section image of the backfill sample prepared from three different solid concentrations of paste were obtained by uniaxial compressive strength test and scanning electron microscope,respectively.The texture features of different SEM images were calculated based on image analysis technology,and then the correlation between these parameters and the strength was analyzed.It was proved that the method is effective in the quantitative analysis on the micro-morphology characteristics of CPB.There is a significant correlation between the texture features and the unconfined compressive strength,and the prediction of strength is feasible using texture parameters of the CPB microstructure.
基金Project(2019zzts678)supported by the Fundamental Research Funds for the Central Universities,China。
文摘In this study,different influence mechanisms associated with temperatures and pH values were investigated through cemented paste backfill(CPB)systems.CPB samples were prepared with temperatures ranging from 10 to 50℃ in 10℃ increments and pH values of 3,7,and 13.Then,the CPB mixture were subjected to rheological tests,thermogravimetric analysis(TG),derivative thermogravimetry analysis(DTG),Fourier-transform infrared spectroscopy(FT-IR),and scanning electron microscopy(SEM).Results demonstrated that the temperatures had significant effects on the rheological properties of CPB,whereas the effects of pH values were relatively unapparent.Higher temperatures(over 20℃)were prone to bring higher shear stress,yield stress,and apparent viscosity with the same pH value condition.However,an overly high temperature(50℃)cannot raise the apparent viscosity.Non-neutral conditions,for pH values of 3 and 13,could strengthen the shear stress and apparent viscosity at the same temperature.Two different yield stress curves could be discovered by uprising pH values,which also led to apparent viscosity of two various curves under the same temperatures(under 50℃).Microscopically,rheological properties of CPB were affected by temperatures and pH values which enhanced or reduced the cement hydration procedures,rates,products and space structures.
基金Projects(51978346,51778302)supported by the National Natural Science Foundation of ChinaProject(202002N3117)supported by the Ningbo Science and Technology Project,China。
文摘An improved design method of pervious concrete was proposed to lower the deviation between the designed and actual porosity and maintain both mechanical property and permeability of pervious concrete. The improved design method is mainly based on the optimal volume ratio of paste to aggregate(VRPA), which was determined by testing the average thickness of cement paste coating aggregate. The performances of pervious concrete designed by the traditional method and the improved one were compared. The results show that with the increase of designed porosity, the reduction of compressive strength and flexural strength of pervious concrete designed by the improved method is significantly smaller than those designed by the traditional one. The maximum deviation between the designed and actual porosity of the pervious concrete by the improved method is only 1.54%, which is far less than 8.7% obtained by the traditional one. Micro-structural analysis shows that the porous distribution of pervious concrete designed by improved method exhibits better uniformity.
基金Project(51904055)supported by the National Natural Science Foundation of ChinaProject(N2001010)supported by the Fundamental Research Funds for the Central Universities of China。
文摘With the gradual depletion of available ore at shallow depth,deep mines have been widely operated around the world and therefore need a longer distance to transport the backfill to the underground stope.In this case,the determination of pressure drop is more important in the pipeline transportation system design.As the pilot loop systems require a large amount of capital and manual investment,even its results are reliable,there is an urgent need to find an alternative simple and cost-saving method to determine the pressure drop.Hence,laboratory L-pipe and a pilot-loop tests were employed to study the flow properties of cemented paste backfill cured at various solid and binder content.The results indicate that the L-pipe test presented a similar trend to the loop test,but the L-pipe was characterized by higher pressure drop values for various solid and cement contents.As cement content increased beyond 0%,the paste in the L-pipe showed a slighter difference in pressure drop evolution compared to the paste in the loop-pipe.These results suggest that the simple L-pipe is a workable substitute for semi-industrial loop tests and can provide guidance for designing practical CPB pipeline systems in deep mines.
基金Project(2009CB623201) supported by the National Basic Research Program of ChinaProjects(50902106, 51272193) supported by the National Natural Science Foundation of ChinaProject(NCET-10-0660) supported by New Century Excellent Talents in Universities of China
文摘Micro computed tomography (Micro-CT) was applied to obtain three-dimensional images of the microstructure of cement paste (water-to-cement mass ratio of 0.5) at different ages. By using the Amira software, component phases of the cement paste such as pores, hydration products, and unhydrated clinker particles were segmented from each other based on their 3D image grey levels; their relative contents were also calculated with the software, and the data are 61.2%, 0% and 38.8% at the beginning of hydration and 11.8%, 78.5% and 9.7% at 28 d age, respectively. The hydration degree of cement paste at different ages was compared with the experimental data acquired by loss on ignition (LOI) tests. The results show that the calculated and measured data reasonably agree with each other, which indicates that micro-CT is a useful and reliable approach to characterize the micro structure evolution of hydrating cement paste.
基金Project(201703D321006)supported by the Shanxi Provincial Key Research and Development Project(Social Development),China。
文摘For the resource utilization of the solid waste coking sulfur paste and the improvement of performance of the asphalt mixture,a method for preparing modified asphalt mixture with coking sulfur paste modifier(CSPM)is herein proposed.Compared with the matrix asphalt mixture,the Marshall stability of the 30%CSPM modified asphalt mixture increased by 38.3%,the dynamic stability increased by nearly one time(reaching 1847.5 times/mm),the splitting strength ratio increased by 39.3%while the splitting tensile strength decreased by 11.7%.After curing,the performance of the CSPM modified asphalt mixture was further improved.The results show that CSPM improved the high temperature stability and water damage resistance of the asphalt mixture,and the low-temperature anti-cracking performance of that was slightly reduced.Chemical analysis of asphalt binders shows that a little sulfur reacted with asphalt to produce polysulfide compounds(R-Sx-R′),and a part of sulfur existed in the form of crystalline sulfur which was further increased after curing.The presence of crystalline sulfur as an inorganic filler is the key point for improving the high temperature stability and water resistance performance of modified asphalt mixture.
基金Project(50278097) supported by the National Natural Science Foundation of China
文摘Tests were carried out on 8 self-compacting reinforced concrete(SCC) beams and 4 normal reinforced concrete beams. The effects of mode of consolidation,load level,reinforcing ratio and structural type on long term behavior of SCC were investigated. Under the same environmental conditions,the shrinkage-time curve of self-compacting concrete beam is very similar to that of normal concrete beam. For both self-compacting reinforced concrete beams and normal reinforced concrete beams,the rate of shrinkage at early stages is higher,the shrinkage strain at 2 months is about 60% of the maximum value at one year. The shrinkage strain of self-compacting reinforced concrete beam after one year is about 450×10-6. Creep deflection of self-compacting reinforced concrete beam decreases as the tensile reinforcing ratio increases. The deflection creep coefficient of self-compacting reinforced concrete beam after one and a half year is about 1.6,which is very close to that of normal reinforced concrete beams cast with vibration. Extra cautions considering shrinkage and creep behavior are not needed for the use of SCC in engineering practices.
基金Project(51408213)supported by the National Natural Science Foundation of China
文摘A series of compression tests were conducted on 150 groups of cement paste specimens with side lengths ranging from 40 mm to 200 mm. The specimens include cube specimens and prism specimens with height to width ratio of 2. The experiment results show that size effect exists in the cubic compressive strength and prismatic compressive strength of the cement paste, and larger specimens resist less in terms of strength than smaller ones. The cubic compressive strength and the prismatic compressive strength of the specimens with side length of 200 mm are respectively about 91% and 89% of the compressive strength of the specimens with the side length of 40 mm. Water to binder ratio has a significant influence on the size effect of the compressive strengths of the cement paste. With a decrease in the water to binder ratio, the size effect is significantly enhanced. When the water to binder ratio is 0.2, the size effects of the cubic compressive strength and the prismatic compressive strength of the cement paste are 1.6 and 1.4 times stronger than those of a water to binder ratio of 0.6. Furthermore, a series of formulas are proposed to calculate the size effect of the cubic compressive strength and the prismatic compressive strength of cement paste, and the results of the size effect predicted by the formulas are in good agreement with the experiment results.
文摘The preparation of lead-free thick-film resistors are reported:using RuO 2 and ruthenates as conductive particles,glass powders composed of B 2 O 3,SiO 2,CaO and Al2 O 3 as insulating phase,adding organic matter which mainly consists of ethyl cellulose and terpineol to form printable pastes.Resistors were fabricated and sintered by conventional screen-printing on 96%Al 2 O 3 substrates,and then sintering in a belt furnace.X-ray diffraction(XRD) and electron scanning microscopy(SEM) have been used to characterize the conductive particles.The resistors exhibit good refiring stability and low temperature coefficient of resistance.Sheet resistance spans from about 80Ω/□ to 600Ω/□.The resistors prepared are qualified for common use.
基金Projects(51878245,U1965105)supported by the National Natural Science Foundation of ChinaProject(2019GSF110006)supported by the Key Research and Development Program of Shandong Province,China+2 种基金Project(2020Z035)supported by the Ningbo 2025 Science and Technology Major Project,ChinaProject(KJ2017B01)supported by the Scientific Research Project of Department of Education of Anhui Province,ChinaProject(2019CEM001)supported by the State Key Laboratory of High Performance Civil Engineering Materials,China。
文摘Cracks easily generate in concrete at early age owing to the shrinkage deformation.CaO-based expansion agent(CEA)and superabsorbent polymers(SAP)have been extensively used for the mitigation of concrete shrinkage.The macroscopic properties of concrete are highly determined by the microstructure.In this study,the influence of CEA and SAP addition on the pore structure evolution of cement paste under different curing temperatures was evaluated via low-field nuclear magnetic resonance spectroscopy.Test results indicated that,in cement paste,a higher CEA content led to a higher porosity and a larger most probable pore diameter(MPPD).Meanwhile,SAP addition increased the porosity and MPPD of CEA cement paste at early age but decreased them after 7 d,and a higher SAP content always brought a higher porosity and MPPD.Furthermore,the addition of SAP led to a lower porosity and MPPD of CEA cement paste than that of plain cement paste after 14 d.Moreover,the porosity and MPPD of CEA cement paste decreased first and subsequently increased as the curing temperature raised.
基金Projects(51878245,U1965105) supported by the National Natural Science Foundation of ChinaProject(2017YFB0310100) supported by the National Key R&D Program of ChinaProject(2019CEM001) supported by the State Key Laboratory of High Performance Civil Engineering Materials,China。
文摘The early-age thermal cracking easily generates and severely impairs the durability of concrete.The temperature rising inhibitor(TRI)was utilized to regulate the temperature evolution by controlling the cement hydration process.This paper aimed to investigate the pore structure formation and hydration characteristics of cement paste containing TRI by low-field nuclear magnetic resonance.The experiment showed that the T_(2) peak of cement paste shifted from 7.32 ms to 0.23 ms regardless of TRI addition.But the pattern of pore structure formation was changed with TRI addition,that is,the pore structure formation was delayed,and the pore successively shifted to left in two parts.In addition,TRI addition significantly prolonged the duration of gel pore formation and greatly decreased the increase rate of gel water,which implied that TRI introduction hindered the growth of C-S-H,and subsequently decreased the hydration rates and delayed the main hydration peak.Meanwhile,TRI dissolved and diffused rapidly at 40℃,delaying the hydration of cement paste seriously.Moreover,TRI brought about the C-S-H nucleation homogeneous and the ion concentration uniform,which might reduce the localized curvature occurring on the sheet of C-S-H,and then decreased the T_(2) intensity of capillary water and gel water.
文摘有机肥部分替代化肥是一种实现化肥减量的可持续农业生产措施。本研究于2020和2021连续2年以“沁黄2号”为供试材料,设不施氮(CK)、常量化肥氮(NPK)、有机肥替代25%化肥氮(25%M)、有机肥替代50%化肥氮(50%M)、有机肥替代75%化肥氮(75%M)和有机肥替代100%化肥氮(100%M) 6个处理,研究不同替代率对谷子产量构成和氮素吸收的影响,并分析氮素吸收调控小米米色、糊化特性和类胡萝卜素组分的效应,明确谷子生产中有机肥最佳替代率。结果表明,2年中较低的有机肥替代化肥氮率显著提高了谷子植株氮素累积,但随着替代率的持续增加,植株氮素累积量呈降低趋势,最终影响谷子产量和小米品质。2020年, 25%M处理显著提高了谷子地上部氮素累积量,较NPK处理提高9.6%;2021年,25%M处理谷子地上部氮素累积量、生物量、穗粒数和产量达到最高,较NPK处理分别提高6.1%、12.0%、15.4%和12.0%。50%M处理显著影响了小米的米色、糊化特征和类胡萝卜素含量,与NPK相比,小米籽粒红绿值、橘色值、支链淀粉含量、总淀粉含量、小米糊化最终黏度、叶黄素含量、玉米黄质含量和黄色素含量的增幅分别可达6.0%、6.0%、7.4%、4.3%、7.8%、20.7%、17.4%和2.8%。但有机肥完全替代化肥降低了谷子地上部氮素吸收、地上部生物量、穗粒数及谷子产量,也抑制了小米叶黄素和玉米黄质含量的提升。2年均表现出谷子地上部氮吸收量与小米单粒重、直链淀粉含量和小米糊化回升值呈显著的负相关。且2021年谷子地上部氮吸收量还与小米总淀粉含量、蛋白质含量、小米粉糊化峰值黏度和小米黄色素含量呈显著的负相关,与小米糊化峰谷黏度呈显著的正相关。综上,施氮总量120 kg hm^(–2)下,有机肥替代25%~50%化肥氮能通过促进植株氮素的吸收,实现产量、米色、蒸煮特性及类胡萝卜素的协同提升,为谷子化肥减量和提质增效生产提供技术支撑。
