In recent years,the prevalence of rice sheath blight caused by Rhizoctonia solani has significantly increased in Heilongjiang Province.Chemical control has become the primary control method.To cope with this,a novel m...In recent years,the prevalence of rice sheath blight caused by Rhizoctonia solani has significantly increased in Heilongjiang Province.Chemical control has become the primary control method.To cope with this,a novel mycelium growth rate method was employed to assess the toxicity of 13 fungicides,including a combination of 45%prochloraz and 125 g·mL^(-1)epoxiconazole,against R.solani.Additionally,the resistance of 99 R.solani strains to thifluzamide across various regions was also evaluated.The findings indicated that 75%trifloxystrobin-tebuconazole exhibited the most effective inhibitory effect,with an effective inhibitory medium concentration(EC50)value of 0.0101μg·mL^(-1).The EC50 values for 20%prothioconazole,125 g·mL^(-1)epoxiconazole,24%thifluzamide,and 50%hexaconazole were all less than 10μg·mL^(-1),indicating a better inhibitory effect on R.solani.The strongest synergistic effect was noted in the mixture of prochloraz and epoxiconazole at a 1:2 ratio,resulting in an EC50 value of 2.9917μg·mL^(-1),and a co-toxicity coefficient of 213.38.Among the 34 strains from Harbin City,the average EC50 value was 196.9341μg·mL^(-1)indicating the highest susceptiblility to thifluzamide.Conversely,15 strains from Shuangyashan City exhibited an average EC50 value of 364.7323μg·mL^(-1),reflecting the lowest sensitivity to thifluzamide.The sensitivity baseline EC50 value for R.solani was 253.8854μg·mL^(-1),with an overall resistance level between 0.1567 and 3.3292,indicating that the resistance level of R.solani in Heilongjiang Province remained low.Therefore,R.solani was still sensitive to thifluzamide in most areas of Heilongjiang Province,but there was a certain risk of resistance in Qitaihe City,which needed to be continuously monitored.At the same time,this study might provide a theoretical foundation for enhancing the prevention and management of the rice sheath blight.展开更多
Background Cotton(Gossypium hirsutum L.)is one of the most significant fibre and cash crops and plays an important role in Indian industrial and agricultural economies.However,over the years quantity and quality have ...Background Cotton(Gossypium hirsutum L.)is one of the most significant fibre and cash crops and plays an important role in Indian industrial and agricultural economies.However,over the years quantity and quality have been hampered by the pest leafhopper.Leafhopper alone has been shown to cause yield losses of up to 40%.In this study,screening and evaluation were performed to identify and categorize 100 cotton genotypes along with 5 checks as resistant,moderately resistant,sensitive and highly sensitive to leafhoppers.Results A total of hundred genotypes were evaluated along with five checks for leafhopper resistance.Based on the screening results,a total of 19 genotypes were resistant to leafhoppers,which was on par with the findings of the check KC 3.The contents of total soluble sugar,total soluble protein,and total free amino acids were significantly positively correlated with the mean grade,whereas total phenols content and trichome density were significantly negatively correlated with the susceptibility grade.However,based on screening and biochemical analysis,the genotypes KC 2,JR-23,Samaru-26-T,D 4,TCH 1728,RS 253,and B-61-1862 exhibited high resistance to leafhopper.Conclusion According to the findings of this study,choosing genotypes with high total phenolics content together with high trichome density and low contents of total soluble sugar,total soluble protein,and free amino acids may aid in the development of resistant genotypes.展开更多
The advancement of Clustered Regularly Interspaced Short Palindromic Repeats(CRISPR)gene editing technology has revolutionized the comprehension of human genome,propelling molecular and cellular biology research into ...The advancement of Clustered Regularly Interspaced Short Palindromic Repeats(CRISPR)gene editing technology has revolutionized the comprehension of human genome,propelling molecular and cellular biology research into unexplored realms and accelerating progress in life sciences and medicine.CRISPR-based gene screening,recognized for its efficiency and practicality,is widely utilized across diverse biological fields.Aging is a multifaceted process governed by a myriad of genetic and epigenetic factors.Unraveling the genes regulating aging holds promise for understanding this intricate phenomenon and devising strategies for its assessment and intervention.This review provides a comprehensive overview of the progress in CRISPR screening and its applications in aging research,while also offering insights into future directions.CRISPR-based genetic-manipulation tools are positioned as indispensable instruments for mitigating aging and managing age-related diseases.展开更多
In this paper,we introduce the censored composite conditional quantile coefficient(cC-CQC)to rank the relative importance of each predictor in high-dimensional censored regression.The cCCQC takes advantage of all usef...In this paper,we introduce the censored composite conditional quantile coefficient(cC-CQC)to rank the relative importance of each predictor in high-dimensional censored regression.The cCCQC takes advantage of all useful information across quantiles and can detect nonlinear effects including interactions and heterogeneity,effectively.Furthermore,the proposed screening method based on cCCQC is robust to the existence of outliers and enjoys the sure screening property.Simulation results demonstrate that the proposed method performs competitively on survival datasets of high-dimensional predictors,particularly when the variables are highly correlated.展开更多
A feasible method to improve the reliability and processing efficiency of large vibrating screen via the application of an elastic screen surface with multiple attached substructures （ESSMAS） was proposed. In the ES...A feasible method to improve the reliability and processing efficiency of large vibrating screen via the application of an elastic screen surface with multiple attached substructures （ESSMAS） was proposed. In the ESSMAS, every screen rod, with ends embedded into elastomer, is coupled to the main screen structure in a relatively flexible manner. The theoretical analysis was conducted, which consists of establishing dynamic model promoted from the fuzzy structure theory as well as calculating for the equivalent stiffness of each attached structure. According to the numerical simulation using the NEWMARK-fl integration method, this assembling pattern significantly leads to the screen surface/rod having larger vibration intensity than that of the corresponding position on screen structure, which specifically, with an averaged acceleration amplitude increasing ratio of 11.37% in theoretical analysis and 20.27% in experimental test. The experimental results, within a tolerant error, also confirm the established model and demonstrate the feasibility of ESSMAS.展开更多
In order to improve the screening efficiency of vibrating screen and make vibration process smooth,a new type of magnetorheological (MR) damper was proposed. The signals of displacement in the vibration process during...In order to improve the screening efficiency of vibrating screen and make vibration process smooth,a new type of magnetorheological (MR) damper was proposed. The signals of displacement in the vibration process during the test were collected. The trispectrum model of autoregressive (AR) time series was built and the correlation dimension was used to quantify the fractal characteristics during the vibration process. The result shows that,in different working conditions,trispectrum slices are applied to obtaining the information of non-Gaussian,nonlinear amplitude?frequency characteristics of the signal. Besides,there is correlation between the correlation dimension of vibration signal and trispectrum slices,which is very important to select the optimum working parameters of the MR damper and vibrating screen. And in the experimental conditions,it is found that when the working current of MR damper is 2 A and the rotation speed of vibration motor is 800 r/min,the vibration screen reaches its maximum screening efficiency.展开更多
This paper, probing into heavy metal control in domestic rubbish by source screening and nutrient element analysis, revealed the feasibility of source control of heavy metals and the suitability of rubbish as turfgras...This paper, probing into heavy metal control in domestic rubbish by source screening and nutrient element analysis, revealed the feasibility of source control of heavy metals and the suitability of rubbish as turfgrass medium. Heavy metals in domestic rubbish were controlled by source screening before composting. The study consisted of a control with garden soil. The contents of main mineral elements and heavy metals in rubbish compost and control were determined by the method of ICP-AES. The results showed that heavy metal concentrations in rubbish were lower than those in garden soil, and little difference occurred between rubbish and garden soil in main mineral element concentrations. Based on this, it was concluded that rubbish compost was favorable for using as turfgrass medium and heavy metal control in rubbish by source screening was effective.展开更多
Demand for large vibrating screen is huge in the mineral processing industry. As bending and random vibration are not considered in a traditional design method for beam structures of a large vibrating screen, fatigue ...Demand for large vibrating screen is huge in the mineral processing industry. As bending and random vibration are not considered in a traditional design method for beam structures of a large vibrating screen, fatigue damage occurs frequently to affect the screening performance. This work aims to conduct a systematic mechanics analysis of the beam structures and improve the design method. Total motion of a beam structure in screening process can be decomposed into the traditional followed rigid translation(FRT), bending vibration(BV) and axial linear-distributed random rigid translation(ALRRT) excited by the side-plates. When treated as a generalized single-degree-of-freedom(SDOF) elastic system analytically, the BV can be solved by the Rayleigh's method. Stochastic analysis for random process is conducted for the detailed ALRRT calculation. Expressions for the mechanics property, namely, the shearing force and bending-moment with respect to BV and ALRRT, are derived, respectively. Experimental and numerical investigations demonstrate that the largest BV exists at the beam center and can be nearly ignored in comparison with the FRT during a simplified engineering design. With the BV and FRT considered, the mechanics property accords well with the practical situation with the maximum error of 6.33%, which is less than that obtained by traditional method.展开更多
A new concept of banana vibrating screen which has the same effect as traditional banana vibrating screen in a new way was put forward.The dynamic model of vibrating screen was established and its working principle wa...A new concept of banana vibrating screen which has the same effect as traditional banana vibrating screen in a new way was put forward.The dynamic model of vibrating screen was established and its working principle was analyzed when the action line of the exciting force did not act through the centroid of screen box.Moreover,the dynamic differential equations of centroid and screen surface were obtained.The motions of centroid and screen surface were simulated with actual parameters of the design example in Matlab/Simulink.The results show that not only the amplitude has a significant decrease from 9.38 to 4.10 mm,but also the throwing index and vibrating direction angle have a significant decrease from 10.49 to 4.59,and from 58.10° to 33.29°,respectively,along the screen surface,which indicates that motion characteristics of vibrating screen are consistent with those of traditional banana vibrating screen only by means of a single angle of screen surface.What's more,such banana vibrating screen of variable linear trajectory with greater processing capacity could be obtained by adjusting the relative position of force center and the centroid of screen box properly.展开更多
The strain Lv（1- z） isolated from the Henan bauxite was characterized by morphological observation, biochemical and physiological identification, and 16S rDNA sequence analysis. The influences of temperature, initia...The strain Lv（1- z） isolated from the Henan bauxite was characterized by morphological observation, biochemical and physiological identification, and 16S rDNA sequence analysis. The influences of temperature, initial pH value, the volume of medium, shaking speed and illite concentration on the desilicating ability of the strain Lv（1- z） were investigated. The results show that the bacterium is a Gram-negative rod-shaped bacterium with oval endspores and thick capsule, but without flagellum. The biochemical and physiological tests indicate that the strain Lv（1- z） is similar to Bacillus rnucilaginosus. In GenBank the 16S rDNA sequence similarity of the strain Lv（1- z） and the B. rnucilaginosus YNUCC0001（AY571332） is more than 99%. Based on the above results, the strain Lv（1- z） is identified as B. rnucilaginosus. The optimum conditions for the strain L（1- z） to remove silicon from illite are as follows., temperature is 30℃ ;initial pH value is 7.5; medium volume in 200 mL bottle is 60 mL; shaking speed of rotary shaker is 220 r/m ; illite concentration is 1%.展开更多
Background： Large quantities of nitrogen （N） fertilizer applied to cotton cropping systems support high yields but cause adverse environmental impacts such as N20 emission and water eutrophication. The development ...Background： Large quantities of nitrogen （N） fertilizer applied to cotton cropping systems support high yields but cause adverse environmental impacts such as N20 emission and water eutrophication. The development of cotton cultivars with higher N use efficiencies suitable for low-N conditions is therefore important for sustainable production. In this study, we evaluated 100 cotton genotypes in 2016 for N use efficiency and related traits at the seedling stage. Methods： Sand culture experiment was conducted with low N levels （0.01 g.kg i） or normal N levels （0.1 g.kg i）. We investigated plant height, SPAD value （soil plant analysis development chlorophyll meter）, dry weight, N accumulation, N utilization efficiency, and N uptake efficiency. Through descriptive statistics, principal component analysis and heatmap clustering analysis, we confirmed the evaluation index system of N-efficient genotypes and the classification of N-efficient genotypes. Results： Significant differences were observed among N levels and genotypes for all agronomic traits and N levels. Coefficients of variation varied greatly and ranged from 6.7N28.8 and 7.4N20.8 under low-N and normal-N treatment, respectively. All traits showed highly significant positive correlations with each other, except SPAD value. The principal components under both N levels were similar, showing that total dry weight, aboveground dry weight, total N accumulation, and N uptake efficiency were important components. We confirmed these four traits as suitable screening indexes for low N tolerance. Based on the results of heatmap clustering and scatter diagram analysis of N efficiency value, 10 genotypes were found low-N tolerant, in which five varieties were inefficient under both low and normal N conditions, while four varieties were found efficient under low-N conditions but inefficient under normal-N conditions. Only one variety was efficient under both low and normal-N conditions. Meanwhile, 20 genotypes were identified as low-N sensitive ones, in which 19 genotypes were inefficient under low-N conditions but efficient under normal-N conditions, one variety was inefficient under both low and normal-N conditions. Conclusion： We preliminarily identified Kashi as a low-N tolerant and N-efficient cotton genotype, and CCRI 64 as a low- N sensitive and N-inefficient cotton genotype. Further studies should be carried out to verify the yield and heritability effect of specific genotypes in the field.展开更多
A feasible method was proposed to improve the vibration intensity of screen surface via application of a new type elastic screen surface with multi degree of freedom(NTESSMDF). In the NTESSMDF, the primary robs were c...A feasible method was proposed to improve the vibration intensity of screen surface via application of a new type elastic screen surface with multi degree of freedom(NTESSMDF). In the NTESSMDF, the primary robs were coupled to the main screen structure with ends embedded into the elastomers, and the secondary robs were attached to adjacent two primary robs with elastic bands. The dynamic model of vibrating screen with NTESSMDF was established based on Lagrange's equation and the equivalent stiffnesses of the elastomer and elastic band were calculated. According to numerical simulation using the 4th order Runge-Kutta method, the vibration intensity of screen surface can be enhanced substantially with an averaged acceleration amplitude increasing ratio of 72.36%. The primary robs and secondary robs vibrate inversely in steady state, which would result in the friability of materials and avoid stoppage. The experimental results validate the dynamic characteristics with acceleration amplitude rising by62.93% on average, which demonstrates the feasibility of NTESSMDF.展开更多
A line laser with high power as the background light source for the design of a new photoelectric detection target is proposed in this paper, aiming to improve the detection ability of the traditional photoelectric de...A line laser with high power as the background light source for the design of a new photoelectric detection target is proposed in this paper, aiming to improve the detection ability of the traditional photoelectric detection target under low background illumination. The laser emitted pulse waveform function and the laser echo pulse response function were used to establish the mathematical model of the reflected echo power of projectile in the detection area and derive the calculation function of minimum detectable echo power in the line laser detection screen, according to information of the line laser emitted power, incident angle of projectile, duration time and detection distance of projectile passing through the line laser detection screen. Calculations and experimental results showed that the design method of line laser detection screen and calculation model of laser echo power are reasonable, and the detection ability of line laser detection screen is obviously higher than that of traditional photoelectric detection screen, especially in low background illumination;at the same time, the designed line laser detection screen was used to combine a six line laser detection screen intersection test system, based on live ammunition for shooting. The test system is stable and able to obtain the dynamic parameters of the flying projectile, verifying that the design of the line laser detection screen in new photoelectric detection target can be suitable for shooting range test applications.展开更多
Background:Salt stress significantly inhibits the growth,development,and productivity of cotton because of osmotic,ionic,and oxidative stresses.Therefore,the screening and development of salt tolerant cotton cultivars...Background:Salt stress significantly inhibits the growth,development,and productivity of cotton because of osmotic,ionic,and oxidative stresses.Therefore,the screening and development of salt tolerant cotton cultivars is a key issue towards sustainable agriculture.This study subjected 11 upland cotton genotypes at the seedling growth stage to five different salt concentrations and evaluated their salt tolerance and reliable traits.Results:Several morpho-physiological traits were measured after 10 days of salinity treatment and the salt tolerance performance varied significantly among the tested cotton genotypes.The optimal Na Cl concentration for the evaluation of salt tolerance was 200 mmol·L-1.Membership function value and salt tolerance index were used to identify the most consistent salt tolerance traits.Leaf relative water content and photosynthesis were identified as reliable indicators for salt tolerance at the seedling stage.All considered traits related to salt tolerance indices were significantly and positively correlated with each other except for malondialdehyde.Cluster heat map analysis based on the morpho-physiological salt tolerance-indices clearly discriminated the 11 cotton genotypes into three different salt tolerance clusters.Cluster I represented the salt-tolerant genotypes(Z9807,Z0228,and Z7526)whereas clusters II(Z0710,Z7514,Z1910,and Z7516)and III(Z0102,Z7780,Z9648,and Z9612)represented moderately salttolerant and salt-sensitive genotypes,respectively.Conclusions:A hydroponic screening system was established.Leaf relative water content and photosynthesis were identified as two reliable traits that adequately represented the salt tolerance of cotton genotypes at the seedling growth stage.Furthermore,three salt-tolerant genotypes were identified,which might be used as genetic resources for the salt-tolerance breeding of cotton.展开更多
基金Supported by the Green Plant Protection Project(213010801)the Heilongjiang Province Key Research and Development Plan Project(20232X02 B0502)the Natural Science Foundation of Heilongjiang Province(LH2022C022)。
文摘In recent years,the prevalence of rice sheath blight caused by Rhizoctonia solani has significantly increased in Heilongjiang Province.Chemical control has become the primary control method.To cope with this,a novel mycelium growth rate method was employed to assess the toxicity of 13 fungicides,including a combination of 45%prochloraz and 125 g·mL^(-1)epoxiconazole,against R.solani.Additionally,the resistance of 99 R.solani strains to thifluzamide across various regions was also evaluated.The findings indicated that 75%trifloxystrobin-tebuconazole exhibited the most effective inhibitory effect,with an effective inhibitory medium concentration(EC50)value of 0.0101μg·mL^(-1).The EC50 values for 20%prothioconazole,125 g·mL^(-1)epoxiconazole,24%thifluzamide,and 50%hexaconazole were all less than 10μg·mL^(-1),indicating a better inhibitory effect on R.solani.The strongest synergistic effect was noted in the mixture of prochloraz and epoxiconazole at a 1:2 ratio,resulting in an EC50 value of 2.9917μg·mL^(-1),and a co-toxicity coefficient of 213.38.Among the 34 strains from Harbin City,the average EC50 value was 196.9341μg·mL^(-1)indicating the highest susceptiblility to thifluzamide.Conversely,15 strains from Shuangyashan City exhibited an average EC50 value of 364.7323μg·mL^(-1),reflecting the lowest sensitivity to thifluzamide.The sensitivity baseline EC50 value for R.solani was 253.8854μg·mL^(-1),with an overall resistance level between 0.1567 and 3.3292,indicating that the resistance level of R.solani in Heilongjiang Province remained low.Therefore,R.solani was still sensitive to thifluzamide in most areas of Heilongjiang Province,but there was a certain risk of resistance in Qitaihe City,which needed to be continuously monitored.At the same time,this study might provide a theoretical foundation for enhancing the prevention and management of the rice sheath blight.
文摘Background Cotton(Gossypium hirsutum L.)is one of the most significant fibre and cash crops and plays an important role in Indian industrial and agricultural economies.However,over the years quantity and quality have been hampered by the pest leafhopper.Leafhopper alone has been shown to cause yield losses of up to 40%.In this study,screening and evaluation were performed to identify and categorize 100 cotton genotypes along with 5 checks as resistant,moderately resistant,sensitive and highly sensitive to leafhoppers.Results A total of hundred genotypes were evaluated along with five checks for leafhopper resistance.Based on the screening results,a total of 19 genotypes were resistant to leafhoppers,which was on par with the findings of the check KC 3.The contents of total soluble sugar,total soluble protein,and total free amino acids were significantly positively correlated with the mean grade,whereas total phenols content and trichome density were significantly negatively correlated with the susceptibility grade.However,based on screening and biochemical analysis,the genotypes KC 2,JR-23,Samaru-26-T,D 4,TCH 1728,RS 253,and B-61-1862 exhibited high resistance to leafhopper.Conclusion According to the findings of this study,choosing genotypes with high total phenolics content together with high trichome density and low contents of total soluble sugar,total soluble protein,and free amino acids may aid in the development of resistant genotypes.
文摘The advancement of Clustered Regularly Interspaced Short Palindromic Repeats(CRISPR)gene editing technology has revolutionized the comprehension of human genome,propelling molecular and cellular biology research into unexplored realms and accelerating progress in life sciences and medicine.CRISPR-based gene screening,recognized for its efficiency and practicality,is widely utilized across diverse biological fields.Aging is a multifaceted process governed by a myriad of genetic and epigenetic factors.Unraveling the genes regulating aging holds promise for understanding this intricate phenomenon and devising strategies for its assessment and intervention.This review provides a comprehensive overview of the progress in CRISPR screening and its applications in aging research,while also offering insights into future directions.CRISPR-based genetic-manipulation tools are positioned as indispensable instruments for mitigating aging and managing age-related diseases.
基金Outstanding Youth Foundation of Hunan Provincial Department of Education(Grant No.22B0911)。
文摘In this paper,we introduce the censored composite conditional quantile coefficient(cC-CQC)to rank the relative importance of each predictor in high-dimensional censored regression.The cCCQC takes advantage of all useful information across quantiles and can detect nonlinear effects including interactions and heterogeneity,effectively.Furthermore,the proposed screening method based on cCCQC is robust to the existence of outliers and enjoys the sure screening property.Simulation results demonstrate that the proposed method performs competitively on survival datasets of high-dimensional predictors,particularly when the variables are highly correlated.
基金Projects(50574091,50774084) supported by the National Natural Science Foundation of China
文摘A feasible method to improve the reliability and processing efficiency of large vibrating screen via the application of an elastic screen surface with multiple attached substructures （ESSMAS） was proposed. In the ESSMAS, every screen rod, with ends embedded into elastomer, is coupled to the main screen structure in a relatively flexible manner. The theoretical analysis was conducted, which consists of establishing dynamic model promoted from the fuzzy structure theory as well as calculating for the equivalent stiffness of each attached structure. According to the numerical simulation using the NEWMARK-fl integration method, this assembling pattern significantly leads to the screen surface/rod having larger vibration intensity than that of the corresponding position on screen structure, which specifically, with an averaged acceleration amplitude increasing ratio of 11.37% in theoretical analysis and 20.27% in experimental test. The experimental results, within a tolerant error, also confirm the established model and demonstrate the feasibility of ESSMAS.
基金Project(50975098) supported by the National Natural Science Foundation of ChinaProject(2008HZ0002-1) supported by the Major Scientific and Technological Program of Fujian Province,China
文摘In order to improve the screening efficiency of vibrating screen and make vibration process smooth,a new type of magnetorheological (MR) damper was proposed. The signals of displacement in the vibration process during the test were collected. The trispectrum model of autoregressive (AR) time series was built and the correlation dimension was used to quantify the fractal characteristics during the vibration process. The result shows that,in different working conditions,trispectrum slices are applied to obtaining the information of non-Gaussian,nonlinear amplitude?frequency characteristics of the signal. Besides,there is correlation between the correlation dimension of vibration signal and trispectrum slices,which is very important to select the optimum working parameters of the MR damper and vibrating screen. And in the experimental conditions,it is found that when the working current of MR damper is 2 A and the rotation speed of vibration motor is 800 r/min,the vibration screen reaches its maximum screening efficiency.
基金NationalNaturalScienceFoundation (59878033)Tianjin Science and Technology Developm entProgram (043100611).
文摘This paper, probing into heavy metal control in domestic rubbish by source screening and nutrient element analysis, revealed the feasibility of source control of heavy metals and the suitability of rubbish as turfgrass medium. Heavy metals in domestic rubbish were controlled by source screening before composting. The study consisted of a control with garden soil. The contents of main mineral elements and heavy metals in rubbish compost and control were determined by the method of ICP-AES. The results showed that heavy metal concentrations in rubbish were lower than those in garden soil, and little difference occurred between rubbish and garden soil in main mineral element concentrations. Based on this, it was concluded that rubbish compost was favorable for using as turfgrass medium and heavy metal control in rubbish by source screening was effective.
基金Project(51221462) supported by the National Natural Science Foundation of ChinaProject(20120095110001) supported by the Ph D Programs Foundation of Ministry of Education of China
文摘Demand for large vibrating screen is huge in the mineral processing industry. As bending and random vibration are not considered in a traditional design method for beam structures of a large vibrating screen, fatigue damage occurs frequently to affect the screening performance. This work aims to conduct a systematic mechanics analysis of the beam structures and improve the design method. Total motion of a beam structure in screening process can be decomposed into the traditional followed rigid translation(FRT), bending vibration(BV) and axial linear-distributed random rigid translation(ALRRT) excited by the side-plates. When treated as a generalized single-degree-of-freedom(SDOF) elastic system analytically, the BV can be solved by the Rayleigh's method. Stochastic analysis for random process is conducted for the detailed ALRRT calculation. Expressions for the mechanics property, namely, the shearing force and bending-moment with respect to BV and ALRRT, are derived, respectively. Experimental and numerical investigations demonstrate that the largest BV exists at the beam center and can be nearly ignored in comparison with the FRT during a simplified engineering design. With the BV and FRT considered, the mechanics property accords well with the practical situation with the maximum error of 6.33%, which is less than that obtained by traditional method.
基金Projects(50574091, 50774084) supported by the National Natural Science Foundation of ChinaProject(50921001) supported by the Innovative Research Group Science Foundation,ChinaProject supported by Jiangsu Scientific Researching Fund Project ("333" Project),China
文摘A new concept of banana vibrating screen which has the same effect as traditional banana vibrating screen in a new way was put forward.The dynamic model of vibrating screen was established and its working principle was analyzed when the action line of the exciting force did not act through the centroid of screen box.Moreover,the dynamic differential equations of centroid and screen surface were obtained.The motions of centroid and screen surface were simulated with actual parameters of the design example in Matlab/Simulink.The results show that not only the amplitude has a significant decrease from 9.38 to 4.10 mm,but also the throwing index and vibrating direction angle have a significant decrease from 10.49 to 4.59,and from 58.10° to 33.29°,respectively,along the screen surface,which indicates that motion characteristics of vibrating screen are consistent with those of traditional banana vibrating screen only by means of a single angle of screen surface.What's more,such banana vibrating screen of variable linear trajectory with greater processing capacity could be obtained by adjusting the relative position of force center and the centroid of screen box properly.
基金Project (50321402) supported by the National Natural Science Foundation of China project (2004CB619204) supportedby the National Basic Research Program
文摘The strain Lv（1- z） isolated from the Henan bauxite was characterized by morphological observation, biochemical and physiological identification, and 16S rDNA sequence analysis. The influences of temperature, initial pH value, the volume of medium, shaking speed and illite concentration on the desilicating ability of the strain Lv（1- z） were investigated. The results show that the bacterium is a Gram-negative rod-shaped bacterium with oval endspores and thick capsule, but without flagellum. The biochemical and physiological tests indicate that the strain Lv（1- z） is similar to Bacillus rnucilaginosus. In GenBank the 16S rDNA sequence similarity of the strain Lv（1- z） and the B. rnucilaginosus YNUCC0001（AY571332） is more than 99%. Based on the above results, the strain Lv（1- z） is identified as B. rnucilaginosus. The optimum conditions for the strain L（1- z） to remove silicon from illite are as follows., temperature is 30℃ ;initial pH value is 7.5; medium volume in 200 mL bottle is 60 mL; shaking speed of rotary shaker is 220 r/m ; illite concentration is 1%.
基金National key R&D Plan(No.2017YFD0201900,2017YFD0101600)State Key Laboratory of Cotton Biology Fund(CB2016C14)
文摘Background： Large quantities of nitrogen （N） fertilizer applied to cotton cropping systems support high yields but cause adverse environmental impacts such as N20 emission and water eutrophication. The development of cotton cultivars with higher N use efficiencies suitable for low-N conditions is therefore important for sustainable production. In this study, we evaluated 100 cotton genotypes in 2016 for N use efficiency and related traits at the seedling stage. Methods： Sand culture experiment was conducted with low N levels （0.01 g.kg i） or normal N levels （0.1 g.kg i）. We investigated plant height, SPAD value （soil plant analysis development chlorophyll meter）, dry weight, N accumulation, N utilization efficiency, and N uptake efficiency. Through descriptive statistics, principal component analysis and heatmap clustering analysis, we confirmed the evaluation index system of N-efficient genotypes and the classification of N-efficient genotypes. Results： Significant differences were observed among N levels and genotypes for all agronomic traits and N levels. Coefficients of variation varied greatly and ranged from 6.7N28.8 and 7.4N20.8 under low-N and normal-N treatment, respectively. All traits showed highly significant positive correlations with each other, except SPAD value. The principal components under both N levels were similar, showing that total dry weight, aboveground dry weight, total N accumulation, and N uptake efficiency were important components. We confirmed these four traits as suitable screening indexes for low N tolerance. Based on the results of heatmap clustering and scatter diagram analysis of N efficiency value, 10 genotypes were found low-N tolerant, in which five varieties were inefficient under both low and normal N conditions, while four varieties were found efficient under low-N conditions but inefficient under normal-N conditions. Only one variety was efficient under both low and normal-N conditions. Meanwhile, 20 genotypes were identified as low-N sensitive ones, in which 19 genotypes were inefficient under low-N conditions but efficient under normal-N conditions, one variety was inefficient under both low and normal-N conditions. Conclusion： We preliminarily identified Kashi as a low-N tolerant and N-efficient cotton genotype, and CCRI 64 as a low- N sensitive and N-inefficient cotton genotype. Further studies should be carried out to verify the yield and heritability effect of specific genotypes in the field.
基金Project(51221462)supported by the National Natural Science Foundation of China for Innovative Research GroupProject(20120095110001)supported by the Doctoral Fund of Ministry of Education of China+1 种基金Project supported by the Priority Academic Program Development(PAPD)of Jiangsu Higher Education Institutions,ChinaProject(CXJJ201303)supported by the Innovation Foundation of Xuyi Research and Development Center of Mining Equipment and Materials,China University of Mining and Technology,China
文摘A feasible method was proposed to improve the vibration intensity of screen surface via application of a new type elastic screen surface with multi degree of freedom(NTESSMDF). In the NTESSMDF, the primary robs were coupled to the main screen structure with ends embedded into the elastomers, and the secondary robs were attached to adjacent two primary robs with elastic bands. The dynamic model of vibrating screen with NTESSMDF was established based on Lagrange's equation and the equivalent stiffnesses of the elastomer and elastic band were calculated. According to numerical simulation using the 4th order Runge-Kutta method, the vibration intensity of screen surface can be enhanced substantially with an averaged acceleration amplitude increasing ratio of 72.36%. The primary robs and secondary robs vibrate inversely in steady state, which would result in the friability of materials and avoid stoppage. The experimental results validate the dynamic characteristics with acceleration amplitude rising by62.93% on average, which demonstrates the feasibility of NTESSMDF.
基金This work has been supported by Project of the National Natural Science Foundation of China(No.62073256,61773305)in part by the Key Science and Technology Program of Shaanxi Province(No.2020GY-125)Xi’an Science and Technology Innovation Talent Service Enterprise Project(No.2020KJRC0041).
文摘A line laser with high power as the background light source for the design of a new photoelectric detection target is proposed in this paper, aiming to improve the detection ability of the traditional photoelectric detection target under low background illumination. The laser emitted pulse waveform function and the laser echo pulse response function were used to establish the mathematical model of the reflected echo power of projectile in the detection area and derive the calculation function of minimum detectable echo power in the line laser detection screen, according to information of the line laser emitted power, incident angle of projectile, duration time and detection distance of projectile passing through the line laser detection screen. Calculations and experimental results showed that the design method of line laser detection screen and calculation model of laser echo power are reasonable, and the detection ability of line laser detection screen is obviously higher than that of traditional photoelectric detection screen, especially in low background illumination;at the same time, the designed line laser detection screen was used to combine a six line laser detection screen intersection test system, based on live ammunition for shooting. The test system is stable and able to obtain the dynamic parameters of the flying projectile, verifying that the design of the line laser detection screen in new photoelectric detection target can be suitable for shooting range test applications.
基金supported by National Key R&D Program(2017YFD0101600)State Key Laboratory of Cotton Biology(CB2019C17)。
文摘Background:Salt stress significantly inhibits the growth,development,and productivity of cotton because of osmotic,ionic,and oxidative stresses.Therefore,the screening and development of salt tolerant cotton cultivars is a key issue towards sustainable agriculture.This study subjected 11 upland cotton genotypes at the seedling growth stage to five different salt concentrations and evaluated their salt tolerance and reliable traits.Results:Several morpho-physiological traits were measured after 10 days of salinity treatment and the salt tolerance performance varied significantly among the tested cotton genotypes.The optimal Na Cl concentration for the evaluation of salt tolerance was 200 mmol·L-1.Membership function value and salt tolerance index were used to identify the most consistent salt tolerance traits.Leaf relative water content and photosynthesis were identified as reliable indicators for salt tolerance at the seedling stage.All considered traits related to salt tolerance indices were significantly and positively correlated with each other except for malondialdehyde.Cluster heat map analysis based on the morpho-physiological salt tolerance-indices clearly discriminated the 11 cotton genotypes into three different salt tolerance clusters.Cluster I represented the salt-tolerant genotypes(Z9807,Z0228,and Z7526)whereas clusters II(Z0710,Z7514,Z1910,and Z7516)and III(Z0102,Z7780,Z9648,and Z9612)represented moderately salttolerant and salt-sensitive genotypes,respectively.Conclusions:A hydroponic screening system was established.Leaf relative water content and photosynthesis were identified as two reliable traits that adequately represented the salt tolerance of cotton genotypes at the seedling growth stage.Furthermore,three salt-tolerant genotypes were identified,which might be used as genetic resources for the salt-tolerance breeding of cotton.
