A functional interlayer based on two-dimensional(2D)porous modified vermiculite nanosheets(PVS)was obtained by acid-etching vermiculite nanosheets.The as-obtained 2D porous nanosheets exhibited a high specific surface...A functional interlayer based on two-dimensional(2D)porous modified vermiculite nanosheets(PVS)was obtained by acid-etching vermiculite nanosheets.The as-obtained 2D porous nanosheets exhibited a high specific surface area of 427 m^(2)·g^(-1)and rich surface active sites,which help restrain polysulfides(LiPSs)through good physi-cal and chemical adsorption,while simultaneously accelerating the nucleation and dissolution kinetics of Li_(2)S,effec-tively suppressing the shuttle effect.The assembled lithium-sulfur batteries(LSBs)employing the PVS-based inter-layer delivered a high initial discharge capacity of 1386 mAh·g^(-1)at 0.1C(167.5 mAh·g^(-1)),long-term cycling stabil-ity,and good rate property.展开更多
The basic principle of friction welding is intermetallic bonding at the stage of super plasticity attained with self-generating heat due to friction and finishing at upset pressure. Now the dissimilar metal joints are...The basic principle of friction welding is intermetallic bonding at the stage of super plasticity attained with self-generating heat due to friction and finishing at upset pressure. Now the dissimilar metal joints are especially popular in defense, aerospace, automobile, bio-medical,refinery and nuclear engineerings. In friction welding, some special alloys with dual phase are not joined successfully due to poor bonding strength. The alloy surfaces after bonding also have metallurgical changes in the line of interfacing. The reported research work in this area is scanty. Although the sound weld zone of direct bonding between Tie6Ale4 V and SS304 L was obtained though many trials, the joint was not successful. In this paper, the friction welding characteristics between Tie6Ale4 V and SS304 L into which pure oxygen free copper(OFC) was introduced as interlayer were investigated. Boxe Behnken design was used to minimize the number of experiments to be performed. The weld joint was analyzed for its mechanical strength. The highest tensile strength between Tie6Ale4 V and SS304 L between which pure copper was used as insert metal was acquired. Micro-structural analysis and elemental analysis were carried out by EDS, and the formation of intermetallic compound at the interface was identified by XRD analysis.展开更多
Diamond films were deposited on high-speed steel substrates by hot filament chemical vapor deposition （HFCVD） method. To minimize the early formation of graphite and to enhance the diamond film adhesion, a WC-Co coa...Diamond films were deposited on high-speed steel substrates by hot filament chemical vapor deposition （HFCVD） method. To minimize the early formation of graphite and to enhance the diamond film adhesion, a WC-Co coating was used as an interlayer on the steel substrates by high velocity oxy-fuel spraying. The effects of methane content on nucleation, quality, residual stress and adhesion of diamond films were investigated. The results indicate that the increasing methane content leads to the increase in nucleation density, residual stress, the degradation of quality and adhesion of diamond films. Diamond films deposited on high-speed steel （HSS） substrate with a WC-Co interlayer exhibit high nucleation density and good adhesion under the condition of the methane content initially set to be a higher value （4%, volume fraction） for 30 min, and then reduced to 2% for subsequent growth at pressure of 3 kPa and substrate temperature of 800 ℃.展开更多
Multiple surface cracks and interfacial delamination are the major failure mechanisms in film/substrate systems.The effect of interlayer upon the failure mechanisms of interfacial delamination concomitant to surface c...Multiple surface cracks and interfacial delamination are the major failure mechanisms in film/substrate systems.The effect of interlayer upon the failure mechanisms of interfacial delamination concomitant to surface crack was explored.Finite element model was developed to obtain the stress and energy release rate(ERR),which governs the propagation of interface cracks.The dependences of delamination upon the geometry and constitutive properties of interlayer were examined.The results indicate that the effect of elastic modulus of interlayer on the steady state ERR is insignificant.In cases of different geometrical parameters,however,the steady ERR decreases with the increase of the interlayer thickness.These findings lead to the conclusion that the interlayer constraint has significant effect on the ERR and thus coating life,which can be adopted to modify the ceramic top coat.展开更多
The present work pertains to the study on joining of AA6061 and AISI 4340 through continuous drive friction welding. The welds were evaluated by metallographic examination, X-ray diffraction, electron probe microanaly...The present work pertains to the study on joining of AA6061 and AISI 4340 through continuous drive friction welding. The welds were evaluated by metallographic examination, X-ray diffraction, electron probe microanalysis, tensile test and microhardness. The study reveals that the presence of an intermetallic compound layer at the bonded interface exhibits poor tensile strength and elongation. Mg in AA6061 near to the interface is found to be favourable for the formation and growth of Fe2Al5 intermetallics. Introduction of silver as an interlayer through electroplating on AISI 4340 resulted in accumulation of Si at weld interface, replacing Mg at AA6061 side, thereby reducing the width of intermetallic compound layer and correspondingly increasing the tensile strength. Presence of silver at the interface results in partial replacement of Fe-Al based intermetallic compounds with Ag-Al based compounds. The presence of these intermetallics was confirmed by X-ray diffraction technique. Since Ag-Al phases are ductile in nature, tensile strength is not deteriorated and the silicon segregation at weld interface on AA6061 in the joints with silver interlayer acts as diffusion barrier for Fe and further avoids formation of Fe-Al based intermetallics. A maximum tensile strength of 240 MPa along with 4.9% elongation was obtained for the silver interlayer dissimilar metal welds. The observed trends in tensile properties and hardness were explained in relation to the microstructure.展开更多
The landslide disaster caused by the argillaceous interlayer not only destroys buildings,cultivated land,and roads but also seriously endangers human life and safety.This study concerns the mineral composition of sele...The landslide disaster caused by the argillaceous interlayer not only destroys buildings,cultivated land,and roads but also seriously endangers human life and safety.This study concerns the mineral composition of selected argillaceous interlayer and their strength characteristics.To study the mineral composition of argillaceous interlayers,8 kinds of samples in the southern Jiangsu region of China were analyzed utilizing X-ray diffraction(XRD).The repeated direct shear strength tests(RDST)were carried out on the undisturbed specimens of the argillaceous interlayer.The results show that the argillaceous interlayer with high content of kaolinite shows ductile failure mode,which means that there is no obvious residual strength in the shear process.The arrangement of mineral particles on the shear surface of the specimens after different shear displacements was observed under the scanning electron microscope(SEM).It was observed that mineral particles on the shear surface showed a more directional arrangement with the increase of shear displacement.Furthermore,the influence of shear direction on the argillaceous interlayer with completely oriented mineral particles was studied through numerical experiments with four shear strength mechanisms proposition proposed.The influence of the mineral arrangement on the action occasion and magnitude of dilatancy component of shear strength is clarified in the shear mechanism.展开更多
The interlayer clay-organic complex is an important clay-organic association in sedimentary environments. The interlayer region of clay minerals not only provides storage space for organic matter, but also possesses s...The interlayer clay-organic complex is an important clay-organic association in sedimentary environments. The interlayer region of clay minerals not only provides storage space for organic matter, but also possesses solid acid sites; and these acid sites were proposed to be involved with the transformation of organic matter into liquid and gaseous hydrocarbons. However, the effect of the organic matter storage in the interlayer space of clay minerals on the hydrocarbons generation has not been made clear. In this study, the interlayer complex of 12-aminolauric acid (ALA) and Na+-montmorillonite (Na+-Mt), labeled as ALAinter-Mt (Na), was synthesized to investigate the role of the interlayer space of montmorillonite in hydrocarbon generation. Simply mixed ALA-Mt complex [ALA-Mt (Na)] was also prepared for comparison. The pyrolysis of ALA and ALA-Mt complexes was studied using thermogravimetry coupled with Fourier transform infrared spectroscopy (TG-FTIR) and a high temperature-pressure system (a confined gold capsule-autoclave system).展开更多
文摘A functional interlayer based on two-dimensional(2D)porous modified vermiculite nanosheets(PVS)was obtained by acid-etching vermiculite nanosheets.The as-obtained 2D porous nanosheets exhibited a high specific surface area of 427 m^(2)·g^(-1)and rich surface active sites,which help restrain polysulfides(LiPSs)through good physi-cal and chemical adsorption,while simultaneously accelerating the nucleation and dissolution kinetics of Li_(2)S,effec-tively suppressing the shuttle effect.The assembled lithium-sulfur batteries(LSBs)employing the PVS-based inter-layer delivered a high initial discharge capacity of 1386 mAh·g^(-1)at 0.1C(167.5 mAh·g^(-1)),long-term cycling stabil-ity,and good rate property.
文摘The basic principle of friction welding is intermetallic bonding at the stage of super plasticity attained with self-generating heat due to friction and finishing at upset pressure. Now the dissimilar metal joints are especially popular in defense, aerospace, automobile, bio-medical,refinery and nuclear engineerings. In friction welding, some special alloys with dual phase are not joined successfully due to poor bonding strength. The alloy surfaces after bonding also have metallurgical changes in the line of interfacing. The reported research work in this area is scanty. Although the sound weld zone of direct bonding between Tie6Ale4 V and SS304 L was obtained though many trials, the joint was not successful. In this paper, the friction welding characteristics between Tie6Ale4 V and SS304 L into which pure oxygen free copper(OFC) was introduced as interlayer were investigated. Boxe Behnken design was used to minimize the number of experiments to be performed. The weld joint was analyzed for its mechanical strength. The highest tensile strength between Tie6Ale4 V and SS304 L between which pure copper was used as insert metal was acquired. Micro-structural analysis and elemental analysis were carried out by EDS, and the formation of intermetallic compound at the interface was identified by XRD analysis.
基金Project(1343-74236000005) supported by the Innovation Foundation for Postgraduates of Hunan Province, ChinaProject(ZKJ2008001) supported by the Open Fund for Valuable Instruments of Central South University, ChinaProject(2008112048) supported by the Open Fund of State Key Laboratory of Metallurgy, China
文摘Diamond films were deposited on high-speed steel substrates by hot filament chemical vapor deposition （HFCVD） method. To minimize the early formation of graphite and to enhance the diamond film adhesion, a WC-Co coating was used as an interlayer on the steel substrates by high velocity oxy-fuel spraying. The effects of methane content on nucleation, quality, residual stress and adhesion of diamond films were investigated. The results indicate that the increasing methane content leads to the increase in nucleation density, residual stress, the degradation of quality and adhesion of diamond films. Diamond films deposited on high-speed steel （HSS） substrate with a WC-Co interlayer exhibit high nucleation density and good adhesion under the condition of the methane content initially set to be a higher value （4%, volume fraction） for 30 min, and then reduced to 2% for subsequent growth at pressure of 3 kPa and substrate temperature of 800 ℃.
基金Project(2013CB035700) supported by the National Basic Research Program of ChinaProjects(11272259,11321062,11002104) supported by the National Natural Science Foundation of China
文摘Multiple surface cracks and interfacial delamination are the major failure mechanisms in film/substrate systems.The effect of interlayer upon the failure mechanisms of interfacial delamination concomitant to surface crack was explored.Finite element model was developed to obtain the stress and energy release rate(ERR),which governs the propagation of interface cracks.The dependences of delamination upon the geometry and constitutive properties of interlayer were examined.The results indicate that the effect of elastic modulus of interlayer on the steady state ERR is insignificant.In cases of different geometrical parameters,however,the steady ERR decreases with the increase of the interlayer thickness.These findings lead to the conclusion that the interlayer constraint has significant effect on the ERR and thus coating life,which can be adopted to modify the ceramic top coat.
基金Defence Research and Development Organization for the financial support
文摘The present work pertains to the study on joining of AA6061 and AISI 4340 through continuous drive friction welding. The welds were evaluated by metallographic examination, X-ray diffraction, electron probe microanalysis, tensile test and microhardness. The study reveals that the presence of an intermetallic compound layer at the bonded interface exhibits poor tensile strength and elongation. Mg in AA6061 near to the interface is found to be favourable for the formation and growth of Fe2Al5 intermetallics. Introduction of silver as an interlayer through electroplating on AISI 4340 resulted in accumulation of Si at weld interface, replacing Mg at AA6061 side, thereby reducing the width of intermetallic compound layer and correspondingly increasing the tensile strength. Presence of silver at the interface results in partial replacement of Fe-Al based intermetallic compounds with Ag-Al based compounds. The presence of these intermetallics was confirmed by X-ray diffraction technique. Since Ag-Al phases are ductile in nature, tensile strength is not deteriorated and the silicon segregation at weld interface on AA6061 in the joints with silver interlayer acts as diffusion barrier for Fe and further avoids formation of Fe-Al based intermetallics. A maximum tensile strength of 240 MPa along with 4.9% elongation was obtained for the silver interlayer dissimilar metal welds. The observed trends in tensile properties and hardness were explained in relation to the microstructure.
基金Project(41672258) supported by the National Natural Science Foundation of ChinaProject(2018045) supported by the Land and Resources Science&Technology Project of Jiangsu Province,China。
文摘The landslide disaster caused by the argillaceous interlayer not only destroys buildings,cultivated land,and roads but also seriously endangers human life and safety.This study concerns the mineral composition of selected argillaceous interlayer and their strength characteristics.To study the mineral composition of argillaceous interlayers,8 kinds of samples in the southern Jiangsu region of China were analyzed utilizing X-ray diffraction(XRD).The repeated direct shear strength tests(RDST)were carried out on the undisturbed specimens of the argillaceous interlayer.The results show that the argillaceous interlayer with high content of kaolinite shows ductile failure mode,which means that there is no obvious residual strength in the shear process.The arrangement of mineral particles on the shear surface of the specimens after different shear displacements was observed under the scanning electron microscope(SEM).It was observed that mineral particles on the shear surface showed a more directional arrangement with the increase of shear displacement.Furthermore,the influence of shear direction on the argillaceous interlayer with completely oriented mineral particles was studied through numerical experiments with four shear strength mechanisms proposition proposed.The influence of the mineral arrangement on the action occasion and magnitude of dilatancy component of shear strength is clarified in the shear mechanism.
文摘The interlayer clay-organic complex is an important clay-organic association in sedimentary environments. The interlayer region of clay minerals not only provides storage space for organic matter, but also possesses solid acid sites; and these acid sites were proposed to be involved with the transformation of organic matter into liquid and gaseous hydrocarbons. However, the effect of the organic matter storage in the interlayer space of clay minerals on the hydrocarbons generation has not been made clear. In this study, the interlayer complex of 12-aminolauric acid (ALA) and Na+-montmorillonite (Na+-Mt), labeled as ALAinter-Mt (Na), was synthesized to investigate the role of the interlayer space of montmorillonite in hydrocarbon generation. Simply mixed ALA-Mt complex [ALA-Mt (Na)] was also prepared for comparison. The pyrolysis of ALA and ALA-Mt complexes was studied using thermogravimetry coupled with Fourier transform infrared spectroscopy (TG-FTIR) and a high temperature-pressure system (a confined gold capsule-autoclave system).
