A new method of confirming the desired safety headway distance and desired deceleration is put forward according to the detected static or moving target and its simulation results in Matlab are also presented. The val...A new method of confirming the desired safety headway distance and desired deceleration is put forward according to the detected static or moving target and its simulation results in Matlab are also presented. The validity of the algorithm to calculate the reference speeds of both the ACC vehicle and the targeted car according to the vector quadrangle composed of the relative distance, the relative azimuth angle, the relative speeds of the vehicles has also been demonstrated through numerical example in Matlab. New laws to obtain the desired deceleration by estimating the braking force according to the vehicle analyses force equation are established too.展开更多
Most major oil zones in the Daqing Oilfield have reached a later,high water cut stage,but oil recovery is still only approximately 35%,and 50%of reserves remain to be recovered.The remaining oil is primarily distribut...Most major oil zones in the Daqing Oilfield have reached a later,high water cut stage,but oil recovery is still only approximately 35%,and 50%of reserves remain to be recovered.The remaining oil is primarily distributed at the edge of faults,in poor sand bodies,and in insufficiently injected and produced areas.Therefore,the edge of faults is a major target for remaining oil enrichment and potential tapping.Based on the dynamic change of production from development wells determined by the injection-recovery relationship at the edge of faults,we analyzed the control of structural features of faults on remaining oil enrichment at the edge.Our results show that the macroscopic structural features and their geometric relationship with sand bodies controlled remaining oil enrichment zones like the edges of NNE-striking faults,the footwalls of antithetic faults,the hard linkage segments（two faults had linked together with each other to form a bigger through-going fault）,the tips of faults,and the oblique anticlines of soft linkages.Fault edges formed two types of forward microamplitude structures：（1） the tilted uplift of footwalls controlled by inverse fault sections and（2） the hanging-wall horizontal anticlines controlled by synthetic fault points.The remaining oil distribution was controlled by microamplitude structures.Consequently,such zones as the tilted uplift of the footwall of the NNW-striking antithetic faults with a fault throw larger than 40 m,the hard linkage segments,the tips of faults,and the oblique anticlines of soft linkage were favorable for tapping the remaining oil potential.Multi-target directional drilling was used for remaining oil development at fault edges.Reasonable fault spacing was determined on the basis of fault combinations and width of the shattered zone.Well core and log data revealed that the width of the shattered zone on the side of the fault core was less than 15 m in general;therefore,the distance from a fault to the development target should be larger than 15 m.Vertically segmented growth faults should take the separation of the lateral overlap of faults into account.Therefore,the safe distance of remaining oil well deployment at the fault edge should be larger than the sum of the width of shattered zone in faults and the separation of growth faults by vertical segmentation.展开更多
Blast wall can prevent vehicles from approaching the protective building and can reduce the destructive power of shock wave to a certain extent.However,majority of studies on blast walls have some shortcomings.The exp...Blast wall can prevent vehicles from approaching the protective building and can reduce the destructive power of shock wave to a certain extent.However,majority of studies on blast walls have some shortcomings.The explosion test data are few.Most exsiting studies focus on the propagation of shock wave and the influence of blast wall on the propagation of shock wave.Discussion on the main parameters of blast wall design is meagre,such as the design of safety distance,the distance from the blast wall to the protective building,height and width of the blast wall.This paper uses the finite element programme LS-DYNA to design the blast wall.To analyze the convergence of the finite element model and to determine the mesh size of the model,this paper establishes several finite element models with different sizes of meshes to verify the model.Then,the overpressure distribution of the shock wave on the protective building is simulated to implement the blast wall design.The geometric parameters of the blast wall are preliminarily determined.And the influence of the safety distance on the overpressure of the building surface is mainly discussed,so as to determine the final design parameters.When the overpressure is less than 2 kPa,it is considered that there will be no damage to people caused by flying fragments.Eventually,the blast wall height is 3 m,the thickness is 1 m,and the safety distance is 35 m.The proposed method is used to demonstrate the design method,and the final design parameters of the blast wall can thus be used for reference.展开更多
To further investigate car-following behaviors in the cooperative adaptive cruise control（CACC） strategy,a comprehensive control system which can handle three traffic conditions to guarantee driving efficiency and s...To further investigate car-following behaviors in the cooperative adaptive cruise control（CACC） strategy,a comprehensive control system which can handle three traffic conditions to guarantee driving efficiency and safety is designed by using three CACC models.In this control system,some vital comprehensive information,such as multiple preceding cars’ speed differences and headway,variable safety distance（VSD） and time-delay effect on the traffic current and the jamming transition have been investigated via analytical or numerical methods.Local and string stability criterion for the velocity control（VC） model and gap control（GC） model are derived via linear stability theory.Numerical simulations are conducted to study the performance of the simulated traffic flow.The simulation results show that the VC model and GC model can improve driving efficiency and suppress traffic congestion.展开更多
A new adaptive cruise control (ACC) method based on the desired safety headway distance is investigated for improving the vehicle traffic safety at high speed by regulating the additional throttle opening and braking ...A new adaptive cruise control (ACC) method based on the desired safety headway distance is investigated for improving the vehicle traffic safety at high speed by regulating the additional throttle opening and braking torque of driving wheels only. The selection of headway distance sensors, the determination of desired safety headway distance and desired deceleration are elaborated. The ACC flowchart and simulation, as well as signal misinformation and its resolutions are described. The simulation proves that the new ACC method is simpler and feasible. The new method is easily integrated ACC with ABS/ASR to form an organic ABS/ASR/ACC system.展开更多
文摘A new method of confirming the desired safety headway distance and desired deceleration is put forward according to the detected static or moving target and its simulation results in Matlab are also presented. The validity of the algorithm to calculate the reference speeds of both the ACC vehicle and the targeted car according to the vector quadrangle composed of the relative distance, the relative azimuth angle, the relative speeds of the vehicles has also been demonstrated through numerical example in Matlab. New laws to obtain the desired deceleration by estimating the braking force according to the vehicle analyses force equation are established too.
基金financial support from the Natural Science Foundation of China (Grant No. 41272151, 41472126)the Natural Science Foundation for Distinguished Young Scholars of Heilongjiang Province, China (Grant No. JC201304)+1 种基金the Joint Funds of the National Natural Science Foundation of China (Grant No. U1562214)the Program for Huabei Oilfield (Grant No. HBYT-CY5-2015-JS-127)
文摘Most major oil zones in the Daqing Oilfield have reached a later,high water cut stage,but oil recovery is still only approximately 35%,and 50%of reserves remain to be recovered.The remaining oil is primarily distributed at the edge of faults,in poor sand bodies,and in insufficiently injected and produced areas.Therefore,the edge of faults is a major target for remaining oil enrichment and potential tapping.Based on the dynamic change of production from development wells determined by the injection-recovery relationship at the edge of faults,we analyzed the control of structural features of faults on remaining oil enrichment at the edge.Our results show that the macroscopic structural features and their geometric relationship with sand bodies controlled remaining oil enrichment zones like the edges of NNE-striking faults,the footwalls of antithetic faults,the hard linkage segments（two faults had linked together with each other to form a bigger through-going fault）,the tips of faults,and the oblique anticlines of soft linkages.Fault edges formed two types of forward microamplitude structures：（1） the tilted uplift of footwalls controlled by inverse fault sections and（2） the hanging-wall horizontal anticlines controlled by synthetic fault points.The remaining oil distribution was controlled by microamplitude structures.Consequently,such zones as the tilted uplift of the footwall of the NNW-striking antithetic faults with a fault throw larger than 40 m,the hard linkage segments,the tips of faults,and the oblique anticlines of soft linkage were favorable for tapping the remaining oil potential.Multi-target directional drilling was used for remaining oil development at fault edges.Reasonable fault spacing was determined on the basis of fault combinations and width of the shattered zone.Well core and log data revealed that the width of the shattered zone on the side of the fault core was less than 15 m in general;therefore,the distance from a fault to the development target should be larger than 15 m.Vertically segmented growth faults should take the separation of the lateral overlap of faults into account.Therefore,the safe distance of remaining oil well deployment at the fault edge should be larger than the sum of the width of shattered zone in faults and the separation of growth faults by vertical segmentation.
基金This work was supported by the National Natural Science Foundation of China(No.51878507).
文摘Blast wall can prevent vehicles from approaching the protective building and can reduce the destructive power of shock wave to a certain extent.However,majority of studies on blast walls have some shortcomings.The explosion test data are few.Most exsiting studies focus on the propagation of shock wave and the influence of blast wall on the propagation of shock wave.Discussion on the main parameters of blast wall design is meagre,such as the design of safety distance,the distance from the blast wall to the protective building,height and width of the blast wall.This paper uses the finite element programme LS-DYNA to design the blast wall.To analyze the convergence of the finite element model and to determine the mesh size of the model,this paper establishes several finite element models with different sizes of meshes to verify the model.Then,the overpressure distribution of the shock wave on the protective building is simulated to implement the blast wall design.The geometric parameters of the blast wall are preliminarily determined.And the influence of the safety distance on the overpressure of the building surface is mainly discussed,so as to determine the final design parameters.When the overpressure is less than 2 kPa,it is considered that there will be no damage to people caused by flying fragments.Eventually,the blast wall height is 3 m,the thickness is 1 m,and the safety distance is 35 m.The proposed method is used to demonstrate the design method,and the final design parameters of the blast wall can thus be used for reference.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.71571107 and 11302110)The Scientific Research Fund of Zhejiang Province,China(Grant Nos.LY15A020007,LY15E080013,and LY16G010003)+2 种基金The Natural Science Foundation of Ningbo City(Grant Nos.2014A610030and 2015A610299)the Fund from the Government of the Hong Kong Administrative Region,China(Grant No.City U11209614)the K C Wong Magna Fund in Ningbo University,China
文摘To further investigate car-following behaviors in the cooperative adaptive cruise control（CACC） strategy,a comprehensive control system which can handle three traffic conditions to guarantee driving efficiency and safety is designed by using three CACC models.In this control system,some vital comprehensive information,such as multiple preceding cars’ speed differences and headway,variable safety distance（VSD） and time-delay effect on the traffic current and the jamming transition have been investigated via analytical or numerical methods.Local and string stability criterion for the velocity control（VC） model and gap control（GC） model are derived via linear stability theory.Numerical simulations are conducted to study the performance of the simulated traffic flow.The simulation results show that the VC model and GC model can improve driving efficiency and suppress traffic congestion.
文摘A new adaptive cruise control (ACC) method based on the desired safety headway distance is investigated for improving the vehicle traffic safety at high speed by regulating the additional throttle opening and braking torque of driving wheels only. The selection of headway distance sensors, the determination of desired safety headway distance and desired deceleration are elaborated. The ACC flowchart and simulation, as well as signal misinformation and its resolutions are described. The simulation proves that the new ACC method is simpler and feasible. The new method is easily integrated ACC with ABS/ASR to form an organic ABS/ASR/ACC system.
