A special class of cubic polynomials possessing decay of geometry property is studied.This class of cubic bimodal maps has generalized Fibonacci combinatorics.For maps with bounded combinatorics,we show that they have...A special class of cubic polynomials possessing decay of geometry property is studied.This class of cubic bimodal maps has generalized Fibonacci combinatorics.For maps with bounded combinatorics,we show that they have an absolutely continuous invariant probability measure.展开更多
Modelling and simulation of projectile flight is at the core of ballistic computer software and is essential to the study of performance of rifles and projectiles in various engagement conditions.An effective and repr...Modelling and simulation of projectile flight is at the core of ballistic computer software and is essential to the study of performance of rifles and projectiles in various engagement conditions.An effective and representative numerical model of projectile flight requires a relatively good approximation of the aerodynamics.The aerodynamic coefficients of the projectile model should be described as a series of piecewise polynomial functions of the Mach number that ideally meet the following conditions:they are continuous,differentiable at least once,and have a relatively low degree.The paper provides the steps needed to generate such piecewise polynomial functions using readily available tools,and then compares Piecewise Cubic Hermite Interpolating Polynomial(PCHIP),cubic splines,and piecewise linear functions,and their variant,as potential curve fitting methods to approximate the aerodynamics of a generic small arms projectile.A key contribution of the paper is the application of PCHIP to the approximation of projectile aerodynamics,and its evaluation against a set of criteria.Finally,the paper provides a baseline assessment of the impact of the polynomial functions on flight trajectory predictions obtained with 6-degree-of-freedom simulations of a generic projectile.展开更多
In memory polynomial predistorter design, the coefficient estimation algorithm based on normalized least mean square is sensitive to initialization parameters. A predistorter based on generalized normalized gradient d...In memory polynomial predistorter design, the coefficient estimation algorithm based on normalized least mean square is sensitive to initialization parameters. A predistorter based on generalized normalized gradient descent algorithm is proposed. The merit of the GNGD algorithm is that its learning rate provides compensation for the independent assumptions in the derivation of NLMS, thus its stability is improved. Computer simulation shows that the proposed predistorter is very robust. It can overcome the sensitivity of initialization parameters and get a better linearization performance.展开更多
A new algorithm using orthogonal polynomials and sample moments was presented for estimating probability curves directly from experimental or field data of rock variables. The moments estimated directly from a sample ...A new algorithm using orthogonal polynomials and sample moments was presented for estimating probability curves directly from experimental or field data of rock variables. The moments estimated directly from a sample of observed values of a random variable could be conventional moments (moments about the origin or central moments) and probability-weighted moments (PWMs). Probability curves derived from orthogonal polynomials and conventional moments are probability density functions (PDF), and probability curves derived from orthogonal polynomials and PWMs are inverse cumulative density functions (CDF) of random variables. The proposed approach is verified by two most commonly-used theoretical standard distributions: normal and exponential distribution. Examples from observed data of uniaxial compressive strength of a rock and concrete strength data are presented for illustrative purposes. The results show that probability curves of rock variable can be accurately derived from orthogonal polynomials and sample moments. Orthogonal polynomials and PWMs enable more secure inferences to be made from relatively small samples about an underlying probability curve.展开更多
This article studies the problem of uniqueness of two entire or meromorphic functions whose differential polynomials share a finite set. The results extend and improve on some theorems given in [3].
It is shown that the polynomials based image registration, which is widely used in remote sensing field, does not have a sound mathematical basis. In fact, there seems no theoretical basis for the polynomials based tr...It is shown that the polynomials based image registration, which is widely used in remote sensing field, does not have a sound mathematical basis. In fact, there seems no theoretical basis for the polynomials based transform to outperform the affine transformation, a much simpler one,in image registration. If the transformation functions are polynomials of order n, the corresponding scene is shown to be in general the intersection of two curved surfaces of order n + 1, in other words,a space curve. In some special cases, the scene is approaching to a plane. To our knowledge, such results did not appear in the literature previously.展开更多
Systolic implementation of multiplication over GF(2m) is usually very efficient in area-time complexity,but its latency is usually very large.Thus,two low latency systolic multipliers over GF(2m) based on general irre...Systolic implementation of multiplication over GF(2m) is usually very efficient in area-time complexity,but its latency is usually very large.Thus,two low latency systolic multipliers over GF(2m) based on general irreducible polynomials and irreducible pentanomials are presented.First,a signal flow graph(SFG) is used to represent the algorithm for multiplication over GF(2m).Then,the two low latency systolic structures for multiplications over GF(2m) based on general irreducible polynomials and pentanomials are presented from the SFG by suitable cut-set retiming,respectively.Analysis indicates that the proposed two low latency designs involve at least one-third less area-delay product when compared with the existing designs,To the authors' knowledge,the time-complexity of the structures is the lowest found in literature for systolic GF(2m) multipliers based on general irreducible polynomials and pentanomials.The proposed low latency designs are regular and modular,and therefore they are suitable for many time critical applications.展开更多
To address the seismic face stability challenges encountered in urban and subsea tunnel construction,an efficient probabilistic analysis framework for shield tunnel faces under seismic conditions is proposed.Based on ...To address the seismic face stability challenges encountered in urban and subsea tunnel construction,an efficient probabilistic analysis framework for shield tunnel faces under seismic conditions is proposed.Based on the upper-bound theory of limit analysis,an improved three-dimensional discrete deterministic mechanism,accounting for the heterogeneous nature of soil media,is formulated to evaluate seismic face stability.The metamodel of failure probabilistic assessments for seismic tunnel faces is constructed by integrating the sparse polynomial chaos expansion method(SPCE)with the modified pseudo-dynamic approach(MPD).The improved deterministic model is validated by comparing with published literature and numerical simulations results,and the SPCE-MPD metamodel is examined with the traditional MCS method.Based on the SPCE-MPD metamodels,the seismic effects on face failure probability and reliability index are presented and the global sensitivity analysis(GSA)is involved to reflect the influence order of seismic action parameters.Finally,the proposed approach is tested to be effective by a engineering case of the Chengdu outer ring tunnel.The results show that higher uncertainty of seismic response on face stability should be noticed in areas with intense earthquakes and variation of seismic wave velocity has the most profound influence on tunnel face stability.展开更多
针对gPhone连续重力仪漂移修正困难的情况,收集2019年1月—2024年5月云龙地震台gPhone连续重力仪观测数据,采用流动重力数据控制的方法进行漂移修正,并与目前常用的小波滤波和多项式拟合修正方法进行比较,修正后的结果显示:①5.4 a累计...针对gPhone连续重力仪漂移修正困难的情况,收集2019年1月—2024年5月云龙地震台gPhone连续重力仪观测数据,采用流动重力数据控制的方法进行漂移修正,并与目前常用的小波滤波和多项式拟合修正方法进行比较,修正后的结果显示:①5.4 a累计变化量从约1374×10-8 m/s 2降至69×10-8 m/s 2;②漂移修正结果与5阶多项式修正结果相似;③模型评价结果优于其他2种方法;④残差分布与5阶多项式修正结果接近。展开更多
随着风电渗透率的持续上升,电力系统的惯量水平显著下降,对系统频率稳定性构成了新的挑战。为有效评估风电并网情况下电力系统节点惯量的变化,提出了一种基于受控自回归滑动平均(autoregressive moving average with exogenous variable...随着风电渗透率的持续上升,电力系统的惯量水平显著下降,对系统频率稳定性构成了新的挑战。为有效评估风电并网情况下电力系统节点惯量的变化,提出了一种基于受控自回归滑动平均(autoregressive moving average with exogenous variable,ARMAX)模型的改进最大似然估计(maximum likelihood estimation,MLE)参数辨识方法对系统机组直接相连节点进行惯量评估。首先,构建ARMAX模型对发电机组直接相连节点的动态特性进行建模,并利用改进MLE对模型参数进行辨识,以评估与机组直接相连的节点惯量。然后,基于k-means聚类算法对发电机组节点惯量进行分区,计算得到系统区域惯量和中心频率,并进一步对非发电机组节点频率进行自适应多项式拟合计算,得到其系统节点惯量。最后,搭建IEEE39含风力发电机组节点系统,绘制热力图直观展示电力系统节点和区域的惯量分布,验证了所提改进方法的有效性。该方法有助于精准识别系统中不同节点的动态响应特性,为风电并网系统的分析和规划提供了有力支持。展开更多
文摘A special class of cubic polynomials possessing decay of geometry property is studied.This class of cubic bimodal maps has generalized Fibonacci combinatorics.For maps with bounded combinatorics,we show that they have an absolutely continuous invariant probability measure.
文摘Modelling and simulation of projectile flight is at the core of ballistic computer software and is essential to the study of performance of rifles and projectiles in various engagement conditions.An effective and representative numerical model of projectile flight requires a relatively good approximation of the aerodynamics.The aerodynamic coefficients of the projectile model should be described as a series of piecewise polynomial functions of the Mach number that ideally meet the following conditions:they are continuous,differentiable at least once,and have a relatively low degree.The paper provides the steps needed to generate such piecewise polynomial functions using readily available tools,and then compares Piecewise Cubic Hermite Interpolating Polynomial(PCHIP),cubic splines,and piecewise linear functions,and their variant,as potential curve fitting methods to approximate the aerodynamics of a generic small arms projectile.A key contribution of the paper is the application of PCHIP to the approximation of projectile aerodynamics,and its evaluation against a set of criteria.Finally,the paper provides a baseline assessment of the impact of the polynomial functions on flight trajectory predictions obtained with 6-degree-of-freedom simulations of a generic projectile.
基金supported by the National High Technology Research and Development Program of China(2006AA01Z270).
文摘In memory polynomial predistorter design, the coefficient estimation algorithm based on normalized least mean square is sensitive to initialization parameters. A predistorter based on generalized normalized gradient descent algorithm is proposed. The merit of the GNGD algorithm is that its learning rate provides compensation for the independent assumptions in the derivation of NLMS, thus its stability is improved. Computer simulation shows that the proposed predistorter is very robust. It can overcome the sensitivity of initialization parameters and get a better linearization performance.
文摘A new algorithm using orthogonal polynomials and sample moments was presented for estimating probability curves directly from experimental or field data of rock variables. The moments estimated directly from a sample of observed values of a random variable could be conventional moments (moments about the origin or central moments) and probability-weighted moments (PWMs). Probability curves derived from orthogonal polynomials and conventional moments are probability density functions (PDF), and probability curves derived from orthogonal polynomials and PWMs are inverse cumulative density functions (CDF) of random variables. The proposed approach is verified by two most commonly-used theoretical standard distributions: normal and exponential distribution. Examples from observed data of uniaxial compressive strength of a rock and concrete strength data are presented for illustrative purposes. The results show that probability curves of rock variable can be accurately derived from orthogonal polynomials and sample moments. Orthogonal polynomials and PWMs enable more secure inferences to be made from relatively small samples about an underlying probability curve.
文摘This article studies the problem of uniqueness of two entire or meromorphic functions whose differential polynomials share a finite set. The results extend and improve on some theorems given in [3].
基金Supported by National Natural Science Foundation of P. R. China (60175009, 60121302) Corresponding author:Hu Zhan-Yi
文摘It is shown that the polynomials based image registration, which is widely used in remote sensing field, does not have a sound mathematical basis. In fact, there seems no theoretical basis for the polynomials based transform to outperform the affine transformation, a much simpler one,in image registration. If the transformation functions are polynomials of order n, the corresponding scene is shown to be in general the intersection of two curved surfaces of order n + 1, in other words,a space curve. In some special cases, the scene is approaching to a plane. To our knowledge, such results did not appear in the literature previously.
基金Project(61174132) supported by the National Natural Science Foundation of ChinaProject(09JJ6098) supported by the Natural Science Foundation of Hunan Province,China
文摘Systolic implementation of multiplication over GF(2m) is usually very efficient in area-time complexity,but its latency is usually very large.Thus,two low latency systolic multipliers over GF(2m) based on general irreducible polynomials and irreducible pentanomials are presented.First,a signal flow graph(SFG) is used to represent the algorithm for multiplication over GF(2m).Then,the two low latency systolic structures for multiplications over GF(2m) based on general irreducible polynomials and pentanomials are presented from the SFG by suitable cut-set retiming,respectively.Analysis indicates that the proposed two low latency designs involve at least one-third less area-delay product when compared with the existing designs,To the authors' knowledge,the time-complexity of the structures is the lowest found in literature for systolic GF(2m) multipliers based on general irreducible polynomials and pentanomials.The proposed low latency designs are regular and modular,and therefore they are suitable for many time critical applications.
基金Project([2018]3010)supported by the Guizhou Provincial Science and Technology Major Project,China。
文摘To address the seismic face stability challenges encountered in urban and subsea tunnel construction,an efficient probabilistic analysis framework for shield tunnel faces under seismic conditions is proposed.Based on the upper-bound theory of limit analysis,an improved three-dimensional discrete deterministic mechanism,accounting for the heterogeneous nature of soil media,is formulated to evaluate seismic face stability.The metamodel of failure probabilistic assessments for seismic tunnel faces is constructed by integrating the sparse polynomial chaos expansion method(SPCE)with the modified pseudo-dynamic approach(MPD).The improved deterministic model is validated by comparing with published literature and numerical simulations results,and the SPCE-MPD metamodel is examined with the traditional MCS method.Based on the SPCE-MPD metamodels,the seismic effects on face failure probability and reliability index are presented and the global sensitivity analysis(GSA)is involved to reflect the influence order of seismic action parameters.Finally,the proposed approach is tested to be effective by a engineering case of the Chengdu outer ring tunnel.The results show that higher uncertainty of seismic response on face stability should be noticed in areas with intense earthquakes and variation of seismic wave velocity has the most profound influence on tunnel face stability.
文摘针对gPhone连续重力仪漂移修正困难的情况,收集2019年1月—2024年5月云龙地震台gPhone连续重力仪观测数据,采用流动重力数据控制的方法进行漂移修正,并与目前常用的小波滤波和多项式拟合修正方法进行比较,修正后的结果显示:①5.4 a累计变化量从约1374×10-8 m/s 2降至69×10-8 m/s 2;②漂移修正结果与5阶多项式修正结果相似;③模型评价结果优于其他2种方法;④残差分布与5阶多项式修正结果接近。
文摘随着风电渗透率的持续上升,电力系统的惯量水平显著下降,对系统频率稳定性构成了新的挑战。为有效评估风电并网情况下电力系统节点惯量的变化,提出了一种基于受控自回归滑动平均(autoregressive moving average with exogenous variable,ARMAX)模型的改进最大似然估计(maximum likelihood estimation,MLE)参数辨识方法对系统机组直接相连节点进行惯量评估。首先,构建ARMAX模型对发电机组直接相连节点的动态特性进行建模,并利用改进MLE对模型参数进行辨识,以评估与机组直接相连的节点惯量。然后,基于k-means聚类算法对发电机组节点惯量进行分区,计算得到系统区域惯量和中心频率,并进一步对非发电机组节点频率进行自适应多项式拟合计算,得到其系统节点惯量。最后,搭建IEEE39含风力发电机组节点系统,绘制热力图直观展示电力系统节点和区域的惯量分布,验证了所提改进方法的有效性。该方法有助于精准识别系统中不同节点的动态响应特性,为风电并网系统的分析和规划提供了有力支持。
