Developing sustainable and clean energy sources(e.g.,solar,wind,and tide energy)is essential to achieve the goal of carbon neutrality.Due to the discontinuous and inco nsistent nature of common clean energy sources,hi...Developing sustainable and clean energy sources(e.g.,solar,wind,and tide energy)is essential to achieve the goal of carbon neutrality.Due to the discontinuous and inco nsistent nature of common clean energy sources,high-performance energy storage technologies are a critical part of achieving this target.Aqueous zinc metal batteries(AZMBs)with inherent safety,low cost,and competitive performance are regarded as one of the promising candidates for grid-scale energy storage.However,zinc metal anodes(ZMAs)with irreversible problems of dendrite growth,hydrogen evolution reaction,self-corrosio n,and other side reactions have seriously hindered the development and commercialization of AZMBs.An increasing number of researchers are focusing on the stability of ZMAs,so assessing the effectiveness of existing research strategies is critical to the development of AZMBs.This review aims to provide a comprehensive overview of the fundamentals and challenges of AZMBs.Resea rch strategies for interfacial modification of ZMAs are systematically presented.The features of artificial interfacial coating and in-situ interfacial coating of ZMAs are compared and discussed in detail,as well as the effect of modified interfacial ZMA on the full-battery performance.Finally,perspectives are provided on the problems and challenges of ZMAs.This review is expected to offer a constructive reference for the further development and commercialization of AZMBs.展开更多
As a new generation electrode materials for energy storage,perovskites have attracted wide attention because of their unique crystal structure,reversible active sites,rich oxygen vacancies,and good stability.In this r...As a new generation electrode materials for energy storage,perovskites have attracted wide attention because of their unique crystal structure,reversible active sites,rich oxygen vacancies,and good stability.In this review,the design and engineering progress of perovskite materials for supercapacitors(SCs)in recent years is summarized.Specifically,the review will focus on four types of perovskites,perovskite oxides,halide perovskites,fluoride perovskites,and multi-perovskites,within the context of their intrinsic structure and corresponding electrochemical performance.A series of experimental variables,such as synthesis,crystal structure,and electrochemical reaction mechanism,will be carefully analyzed by combining various advanced characterization techniques and theoretical calculations.The applications of these materials as electrodes are then featured for various SCs.Finally,we look forward to the prospects and challenges of perovskite-type SCs electrodes,as well as the future research direction.展开更多
The ohmic contact interface between diamond and metal is essential for the application of diamond detectors.Surface modification can significantly affect the contact performance and eliminate the interface polarizatio...The ohmic contact interface between diamond and metal is essential for the application of diamond detectors.Surface modification can significantly affect the contact performance and eliminate the interface polarization effect.However,the radiation stability of a diamond detector is also sensitive to surface modification.In this work,the influence of surface modification technology on a diamond ohmic contact under high-energy radiation was investigated.Before radiation,the specific contact resistivities(ρc)between Ti/Pt/Au-hydrogen-terminated diamond(H-diamond)and Ti/Pt/Au-oxygenterminated diamond(O-diamond)were 2.0×10^(-4)W·cm^(2) and 4.3×10^(-3)Wcm^(2),respectively.After 10 MeV electron radiation,the ρc of Ti/Pt/Au H-diamond and Ti/Pt/Au O-diamond were 5.3×10^(-3)W·cm^(2)and 9.1×10^(-3)W·cm^(2),respectively.The rates of change of ρc of H-diamond and O-diamond after radiation were 2550%and 112%,respectively.The electron radiation promotes bond reconstruction of the diamond surface,resulting in an increase in ρc.展开更多
Electrocatalysis plays a crucial role in the field of clean energy conversion and provides essential support for the development of eco-friendly technology. There is a pressing need for electrocatalysts in renewable e...Electrocatalysis plays a crucial role in the field of clean energy conversion and provides essential support for the development of eco-friendly technology. There is a pressing need for electrocatalysts in renewable energy systems that exhibit exceptional activity, selectivity, stability, and economic viability. The utilization of metal oxides as electrocatalysts for the process of water splitting has made substantial progress in both theoretical and practical aspects and has emerged as a widely explored field of research. Tungsten oxides(WO_(x)) have attracted much attention and are regarded as a highly promising electrocatalytic material due to their exceptional electrocatalytic activity, cost-effectiveness, and ability to withstand extreme conditions. This review introduces the fundamental mechanism of WOx-based electrocatalysts for the hydrogen evolution reaction and the oxygen evolution reaction, providing a comprehensive overview of recent research advancements in their modification. Factors contributing to the catalytic activity and stability of WOxare explored, highlighting their potential for industrial applications. The aim herein is to provide guidelines for the design and fabrication of WOx-based electrocatalysts, thereby facilitating further research on their mechanistic properties and stability improvements in water splitting.展开更多
Aqueous organic redox flow batteries(RFBs)exhibit favorable characteristics,such as tunability,multielectron transfer capability,and stability of the redox active molecules utilized as anolytes and catholytes,making t...Aqueous organic redox flow batteries(RFBs)exhibit favorable characteristics,such as tunability,multielectron transfer capability,and stability of the redox active molecules utilized as anolytes and catholytes,making them very viable contenders for large-scale grid storage applications.Considerable attention has been paid on the development of efficient redox-active molecules and their performance optimization through chemical substitutions at various places on the backbone as part of the pursuit for high-performance RFBs.Despite the fact that electrodes are vital to optimal performance,they have not garnered significant attention.Limited research has been conducted on the effects of electrode modifications to improve the performance of RFBs.The primary emphasis has been given on the impact of electrode engineering to augment the efficiency of aqueous organic RFBs.An overview of electron transfer at the electrode-electrolyte interface is provided.The implications of electrode modification on the performance of redox flow batteries,with a particular focus on the anodic and cathodic half-cells separately,are then discussed.In each section,significant discrepancies surrounding the effects of electrode engineering are thoroughly examined and discussed.Finally,we have presented a comprehensive assessment along with our perspectives on the future trajectory.展开更多
The ReaxFF can describe the properties of energetic materials(EMs)at equilibrium state,but does not work properly in simulating high-energy particle irradiation process because of its weak short-range interaction.In t...The ReaxFF can describe the properties of energetic materials(EMs)at equilibrium state,but does not work properly in simulating high-energy particle irradiation process because of its weak short-range interaction.In this paper,a modification was made for such a potential by connecting ZieglerBiersack-Littmark(ZBL)potential to ReaxFF-lg through comparing to Density Functional Theory(DFT)results to accurately describe short-range interactions.After modification,the newly fitted ReaxFF-lg/ZBL potential predicts better the equation of state for EMs In displacement cascade simulations,comparing to results from ab initio molecular dynamics(AIMD),ReaxFF-lg/ZBL presented the similar transferred energy from a primary knock-on atom to surrounding atoms,better than the original ReaxFF-lg potential.Further large-scale displacement cascade simulations indicated ReaxFF-lg/ZBL could be applied for cascade simulations with PKA energy from less than 1 keV to high energy(e.g.35 keV)cases,which is suitable for effectively simulating high-energy displacement cascades in EMs using molecular dynamics method.展开更多
To meet the demand for high-performance LiCoO_(2) batteries,it is necessary to overcome challenges such as interface degradation and rapid capacity degradation caused by changes in bulk structure,especially under deep...To meet the demand for high-performance LiCoO_(2) batteries,it is necessary to overcome challenges such as interface degradation and rapid capacity degradation caused by changes in bulk structure,especially under deep delithiation and high temperature conditions.The ion conductive coating layer of Li_(3)PO_(4) has been directly modified on the surface of LiCoO_(2) particles using magnetron sputtering method,significantly improving the lithium storage performance of LiCoO_(2)@Li_(3)PO_(4) composites.Compared to pure LiCoO_(2),the modified LiCoO_(2) sample exhibits obviously better cycle life and high-temperature performance.Especially,under the conditions of 2 and 1 C,the LiCoO_(2)@Li_(3)PO_(4) electrode delivers excellent cycling performance at high voltage of 4.5 V,with capacity retention rates of 89.7%and 75.7%at room temperature and high temperature of 45℃,being far greater than those of 12.3%and 29.1%for bare LiCoO_(2) electrodes.It is discovered that the Li_(3)PO_(4) coating layer not only effectively enhances interface compatibility and suppresses the irreversible phase transition of LiCoO_(2),but also further improves the Li^(+)transport kinetics and significantly reduces battery polarization,ultimately enabling the modified LiCoO_(2) electrode to exhibit excellent lithium storage performance and thermal safety characteristics under high voltage conditions.Thus,such effective modified strategy can undoubtedly provide an important academic inspiration for LiCoO_(2) implication.展开更多
Based on a simplified model reference adaptive control(SMRAC) algorithm a parameter modification algorithm according to fuzzy laws is proposed in this paper. The method makes the adaptive parameters in SMRAC only rely...Based on a simplified model reference adaptive control(SMRAC) algorithm a parameter modification algorithm according to fuzzy laws is proposed in this paper. The method makes the adaptive parameters in SMRAC only rely on the status of performance error. Thus it eliminates the influences of gain coefficients in SMRAC and the amplitude of input signal on the dynamic characteristics. Experiments on various step amplitudes and loads show that the performances of SMRAC are improved by incorporating fuzzy modification method.展开更多
Catalytic properties of MnOx-FeOx complex oxide （hereafter denoted as Mn-Fe） catalysts modified with different loadings of chromium oxide were investigated by using the combination of physico-cbemical techniques, su...Catalytic properties of MnOx-FeOx complex oxide （hereafter denoted as Mn-Fe） catalysts modified with different loadings of chromium oxide were investigated by using the combination of physico-cbemical techniques, such as N2 physisorption, X-ray diffraction （XRD）, high-resolution transmission electron microscope （HRTEM）, in situ Fourier transform infrared spectroscopy （in situ FT-IR） and temperature-programmed reduction （TPR） and their catalytic activities were evaluated with the selective catalytic reduction （SCR） of NOx by NH3. It was found that with the addition of Cr, more NO could be removed in the low-temperature window （below 120 ℃）. Among the tested catalysts, Mn-Fe- Cr （2 ： 2 ： 1） catalyst exhibited the best catalytic performance at 80 ℃ with the NO conversion higher than 90%. The combination of the reaction and characterization results indicated that （1） the strong interaction among tertiary metal oxides existed in the catalysts when Cr was appropriately added, which made the active components better dispersed with less agglomeration and sintering and the largest BET specific surface area could be obtained; （2） Cr improved the low-temperature reducibility of the catalyst and promoted the formation of the active intermediate （-NH3＋）, which favored the low-temperature SCR reaction.展开更多
The catalytic properties of PtSn-based catalysts supported on siliceous SBA-15 and Al-modified SBA-15, such as Al-incorporated SBA-15 （AlSBA-15） and alumina-modified SBA-15 （Al2O3/SBA-15）, for propane dehydrogenat...The catalytic properties of PtSn-based catalysts supported on siliceous SBA-15 and Al-modified SBA-15, such as Al-incorporated SBA-15 （AlSBA-15） and alumina-modified SBA-15 （Al2O3/SBA-15）, for propane dehydrogenation were investigated. Al2O3/SBA-15 was prepared either by an impregnation method using aluminum nitrate aqueous solution, or by the treatment of SBA-15 with a Al（OC3H7）3 solution in anhydrous toluene. N2-physisorption, FT-IR spectroscopy, solid-state 27Al MAS NMR spectroscopy, hydrogen chemisorption, XRF, NH3 temperature-programmed desorption, X-ray photoelectron spectroscopy and TPO were used to characterize these samples. Among these catalysts, the PtSn-based catalyst supported on Al2O3/SBA-15, which was grafted with Al（OC3H7）3, exhibited the best catalytic performance in terms of activity and stability The possible reason was due to the high Pt metal dispersion and/or the strong interactions among Pt, Sn, and the support.展开更多
Modification of the surface properties of polyethylene （PE） films is studied using air dielectric barrier discharge at atmospheric pressure. The treated samples are examined by Water contact angle measurements, Four...Modification of the surface properties of polyethylene （PE） films is studied using air dielectric barrier discharge at atmospheric pressure. The treated samples are examined by Water contact angle measurements, Fourier transform infrared attenuated total reflection spectroscopy （FTIR-ATR）, X-ray photoelectron spectroscopy （XPS） and scanning electron microscopy （SEM）. With the increase in treating time, the water contact angle changes from 93.2° before treatment to a minimum of 53.3° after a treatment for 50 s. Both ATR and XPS results show some oxidized species are introduced into the sample surface by the plasma treatment and the tendency of the water contact angle with the treating time is the same as that of oxygen concentration on the treated sample surface. SEM result shows the surface roughness of PE samples increases with the treatment time increasing.展开更多
A bisphenol epoxy resin was used as modifier to increase the heat resistance of condensed poly-nuclear aromatic （COPNA） resin. The basic properties of COPNA resin and modified resin were characterized by Fourier tra...A bisphenol epoxy resin was used as modifier to increase the heat resistance of condensed poly-nuclear aromatic （COPNA） resin. The basic properties of COPNA resin and modified resin were characterized by Fourier transform infrared spectroscopy （FT-IR）, nuclear magnetic resonance spectroscopy （1H-NMR）, vapor pressure osmometry （VPO） and elemental analysis （EA）. Average structural parameters of resins were calculated by the improved Brown-Ladner method, and heat resistance of resins was tested by thermogravimetric analysis （TGA）. The chemical structure, mechanical properties and heat resistivity of the resin/graphite composites prepared with different resins were compared. The results show that the adhesive property and heat resistance of COPNA resin can be remarkably improved by addition of 5 wt.% epoxy resin. The reason is that the reactions between epoxy groups of epoxy resin and hydroxyl groups of COPNA resin improve the heat resistance and adhesive property of COPNA resin. Electric motor brushes with good mechanical properties and low electrical resistivity were successfully prepared by using the modified resin as binder.展开更多
Conjugated polymers are commonly used as effective hole transport materials(HTMs) for preparation of high-performance perovskite solar cells. However, the hydrophobic nature of these materials renders it difficult to ...Conjugated polymers are commonly used as effective hole transport materials(HTMs) for preparation of high-performance perovskite solar cells. However, the hydrophobic nature of these materials renders it difficult to deposit photovoltaic perovskite layers on top via solution processing. In this article, we report a generic surface modification strategy that enables the deposition of uniform and dense perovskite films on top of non-wetting interfaces. In contrast to the previous proposed chemical modifications which might alter the optoelectronic properties of the interfacial layers, we realized a nondestructive surface modification enabled by introducing a layer of insulating mesoporous aluminum oxide(Al2O3). The surface energies of the typical non-wetting hole-transport layers(PTAA, P3 HT, and Poly-TPD) were significantly reduced by the Al2O3 modification. Benefiting from the intact optoelectronic properties of the HTMs, perovskite solar cells deposited on these interface materials show full open-circuit voltages( V OC) with high fill factors(FF) up to 80%. Our method provides an effective avenue for exploiting the full potential of the existing as well as newly developed non-wetting interface materials for the fabrication of high-performance inverted perovskite solar cells.展开更多
The performance of vanadium flow batteries （VFBs） is closely related to the materials used in the bipo- lar plates. Carbon-based composite bipolar plates are particularly suitable for VFB applications. However. most...The performance of vanadium flow batteries （VFBs） is closely related to the materials used in the bipo- lar plates. Carbon-based composite bipolar plates are particularly suitable for VFB applications. However. most original preparation methods cannot simultaneously achieve good electrical conductivity and me- chanical performance. In this paper, we propose a novel approach to fabricating bipolar plates with car- bon plastic materials, including four steps, namely coating a poly （vinylidene fluoride） （PVDF） solution onto carbon felt, solvent evaporation, hot-pressing, and surface modification. The resulting bipolar plates showed high conductivity, good mechanical strength, and corrosion resistance. Surface modification by coating with carbon nanotubes （CNTs） removed the PVDF-rich layer from the surface of the carbon fibers. The high surface area of the CNT withdrew PVDF resin from the carbon fiber surface, and promoted the formation of a conductive network. The flexibility and battery charge-discharge cycle measurements showed that the composite bipolar plates can meet requirements for VFB applications.展开更多
Based on the problems caused by many oxygen-containing functional groups and poor floatability on the surface of low rank coal,the characteristics of low rank coal were analyzed systematically by means of scanning ele...Based on the problems caused by many oxygen-containing functional groups and poor floatability on the surface of low rank coal,the characteristics of low rank coal were analyzed systematically by means of scanning electron microscopy(SEM),X-ray diffraction(XRD)and X-Ray photoelectron spectroscopy(XPS)techniques.The bubble-particle induction time was used to determine the characterization of the bubble-particle attachment,and the bubble-particle attachment of low rank coal modified by soaking the coal samples in an acid or alkaline solution was analyzed.The floatability of the modified coal surface was verified by flotation tests.The results show that the particle size of 0.125–0.074 mm of the coal sample exhibited better bubble-particle attachment characteristics.The small bubble,the larger approach velocity of bubble and the larger bubble deformation were more helpful to enhance the bubbleparticle attachment.For an acid solution,the smaller the p H was and the longer the soaking time was,the better the floatability of the coal sample and the higher the combustible material recovery were.The combustible material recovery of low rank coal was increased to 78.79%by soaking the sample in an acid solution of pH=0 for 180 min.On the contrary there was a best concentration for the alkaline solution.展开更多
The larch wood was treated by microwave irradiation under different radiant intensity and treating duration. The microwave-treated wood specimens together with the un-treated for comparison were impregnated by water i...The larch wood was treated by microwave irradiation under different radiant intensity and treating duration. The microwave-treated wood specimens together with the un-treated for comparison were impregnated by water in pressure vessel and then tested for permeability, mechanical properties and microstructure change by SEM to study the modification performance of microwave treatment on larch wood. The results showed that under suitable conditions of microwave treatment the permeability of larch wood was improved without noticeable decreasing of the modulus of rupture （MOR） and the modulus of elasticity （MOE）. The radial parenchyma and some pit membrane were ruptured, and tiny cracks were formed in the cell walls. The formation of tiny cracks in the cell walls serves as man-made channels of gas and liquid and this contribute to improve the permeability of the wood.展开更多
Superhydrophobic aluminum surfaces have been prepared by means of electrodeposition of copper on aluminum surfaces, followed by electrochemical modification using stearic acid organic molecules. Scanning electron micr...Superhydrophobic aluminum surfaces have been prepared by means of electrodeposition of copper on aluminum surfaces, followed by electrochemical modification using stearic acid organic molecules. Scanning electron microscopy(SEM) images show that the electrodeposited copper films follow "island growth mode" in the form of microdots and their number densities increase with the rise of the negative deposition potentials. At an electrodeposition potential of-0.2 V the number density of the copper microdots are found to be 4.5×104cm^(-2)that are increased to 2.9×105cm^(-2)at a potential of-0.8 V. Systematically, the distances between the microdots are found to be reduced from 26.6 μm to 11.03 μm with the increase of negative electrochemical potential from-0.2 V to-0.8 V. X-ray diffraction(XRD) analyses have confirmed the formation of copper stearate on the stearic acid modified copper films. The roughness of the stearic acid modified electrodeposited copper films is found to increase with the increase in the density of the copper microdots. A critical copper deposition potential of-0.6 V in conjunction with the stearic acid modification provides a surface roughness of 6.2 μm with a water contact angle of 157?, resulting in superhydrophobic properties on the aluminum substrates.展开更多
Carbon dioxide （CO2） adsorption on a standard metal-organic framework MIL-101 and a pentaethylenehexamine modified MIL-101 （PEHA- MIL-101） are investigated and compared in this study. The adsorbent samples were ch...Carbon dioxide （CO2） adsorption on a standard metal-organic framework MIL-101 and a pentaethylenehexamine modified MIL-101 （PEHA- MIL-101） are investigated and compared in this study. The adsorbent samples were characterized by XRD, FT-IR and nitrogen adsorption- desorption isotherms analysis. CO2 adsorption capacity was measured by a volumetric method. MIL-101 and PEHA-MIL-101 exhibited CO2 adsorption capacities of 0.85 and 1.3 mmO1CO2/gadsorbent at 10 bar and 298 K, respectively. It is observed that CO2 adsorption capacity was fairly improved about 50% after amine modification.展开更多
Viscose-based activated carbon fibers （VACFs） were treated by a dielectric-barrier discharge plasma under the feed gas of N2. The surface functional groups of VACFs were modified to improve the adsorption and cataly...Viscose-based activated carbon fibers （VACFs） were treated by a dielectric-barrier discharge plasma under the feed gas of N2. The surface functional groups of VACFs were modified to improve the adsorption and catalysis capacity for SO2. The surface properties of the untreated and plasma-treated VACFs were diagnosed by SEM, BET, FTIR, and XPS, and the adsorption capacities of VACFs for SO2 were also compared and discussed. The results show that after the plasma treatment, the external surface of VACFs was etched and became rougher, while the surface area and the total pore volume decreased. FTIR and XPS revealed that nitrogen atoms were introduced onto the VACFs surface and the distribution of functional groups on the VACFs surface was changed remarkably. The adsorption characteristic of SO2 indicates that the plasmatreated VACFs have better adsorption capacity than the original VACFs due to the nitrogen functional groups and new functional groups formed in modification, which is beneficial to the adsorption of SO2.展开更多
Formation of malignant tumor originating from normal healthy cell is a multistep process including genetic and epigenetic lesions. Previous studies of cell line model systems displayed that early important epigenetic ...Formation of malignant tumor originating from normal healthy cell is a multistep process including genetic and epigenetic lesions. Previous studies of cell line model systems displayed that early important epigenetic events happened in stepwise fashion prior to cell immortalization. Once these epigenetic alterations are integrated into chromatin, they will perform vertical propagation through cell subculture. Hence, status of epigenetics is dramatically important in maintaining of cell identity. Histone modification is another factor of epigenetic alterations during human oncogenesis. Histones, one of main components of chromatin, can be modified post-translationally. Histone tail modifications are regulated by corresponding modification enzymes. This review focuses on the description of relationship between the main sites of histone modification and oncogenesis.展开更多
基金the financial support from the Australian Research Council,Centre for Materials Science,Queensland University of Technologythe Supported by the Fundamental Research Funds for the Central Universities。
文摘Developing sustainable and clean energy sources(e.g.,solar,wind,and tide energy)is essential to achieve the goal of carbon neutrality.Due to the discontinuous and inco nsistent nature of common clean energy sources,high-performance energy storage technologies are a critical part of achieving this target.Aqueous zinc metal batteries(AZMBs)with inherent safety,low cost,and competitive performance are regarded as one of the promising candidates for grid-scale energy storage.However,zinc metal anodes(ZMAs)with irreversible problems of dendrite growth,hydrogen evolution reaction,self-corrosio n,and other side reactions have seriously hindered the development and commercialization of AZMBs.An increasing number of researchers are focusing on the stability of ZMAs,so assessing the effectiveness of existing research strategies is critical to the development of AZMBs.This review aims to provide a comprehensive overview of the fundamentals and challenges of AZMBs.Resea rch strategies for interfacial modification of ZMAs are systematically presented.The features of artificial interfacial coating and in-situ interfacial coating of ZMAs are compared and discussed in detail,as well as the effect of modified interfacial ZMA on the full-battery performance.Finally,perspectives are provided on the problems and challenges of ZMAs.This review is expected to offer a constructive reference for the further development and commercialization of AZMBs.
基金financial support from the National Natural Science Foundation of China(21676036)the Natural Science Foundation of Chongqing(CSTB2023NSCQ-MSX0580)the Graduate Research and Innovation Foundation of Chongqing(CYS-20040)。
文摘As a new generation electrode materials for energy storage,perovskites have attracted wide attention because of their unique crystal structure,reversible active sites,rich oxygen vacancies,and good stability.In this review,the design and engineering progress of perovskite materials for supercapacitors(SCs)in recent years is summarized.Specifically,the review will focus on four types of perovskites,perovskite oxides,halide perovskites,fluoride perovskites,and multi-perovskites,within the context of their intrinsic structure and corresponding electrochemical performance.A series of experimental variables,such as synthesis,crystal structure,and electrochemical reaction mechanism,will be carefully analyzed by combining various advanced characterization techniques and theoretical calculations.The applications of these materials as electrodes are then featured for various SCs.Finally,we look forward to the prospects and challenges of perovskite-type SCs electrodes,as well as the future research direction.
基金Project supported by the National Key Research and Development Program of China(Grant No.2022YFB3608601).
文摘The ohmic contact interface between diamond and metal is essential for the application of diamond detectors.Surface modification can significantly affect the contact performance and eliminate the interface polarization effect.However,the radiation stability of a diamond detector is also sensitive to surface modification.In this work,the influence of surface modification technology on a diamond ohmic contact under high-energy radiation was investigated.Before radiation,the specific contact resistivities(ρc)between Ti/Pt/Au-hydrogen-terminated diamond(H-diamond)and Ti/Pt/Au-oxygenterminated diamond(O-diamond)were 2.0×10^(-4)W·cm^(2) and 4.3×10^(-3)Wcm^(2),respectively.After 10 MeV electron radiation,the ρc of Ti/Pt/Au H-diamond and Ti/Pt/Au O-diamond were 5.3×10^(-3)W·cm^(2)and 9.1×10^(-3)W·cm^(2),respectively.The rates of change of ρc of H-diamond and O-diamond after radiation were 2550%and 112%,respectively.The electron radiation promotes bond reconstruction of the diamond surface,resulting in an increase in ρc.
基金supported by the National Natural Science Foundation of China (grant no. 51902292)the China Postdoctoral Science Foundation (grant no. 2024M752942)the Project funding for Young Backbone Teachers in Colleges and Universities of Henan Province (2020GGJS013)。
文摘Electrocatalysis plays a crucial role in the field of clean energy conversion and provides essential support for the development of eco-friendly technology. There is a pressing need for electrocatalysts in renewable energy systems that exhibit exceptional activity, selectivity, stability, and economic viability. The utilization of metal oxides as electrocatalysts for the process of water splitting has made substantial progress in both theoretical and practical aspects and has emerged as a widely explored field of research. Tungsten oxides(WO_(x)) have attracted much attention and are regarded as a highly promising electrocatalytic material due to their exceptional electrocatalytic activity, cost-effectiveness, and ability to withstand extreme conditions. This review introduces the fundamental mechanism of WOx-based electrocatalysts for the hydrogen evolution reaction and the oxygen evolution reaction, providing a comprehensive overview of recent research advancements in their modification. Factors contributing to the catalytic activity and stability of WOxare explored, highlighting their potential for industrial applications. The aim herein is to provide guidelines for the design and fabrication of WOx-based electrocatalysts, thereby facilitating further research on their mechanistic properties and stability improvements in water splitting.
基金the financial support received from Interdisciplinary Research Center for Hydrogen Technologies and Carbon Management(IRC-HTCM)at King Fahd University of Petroleum and Minerals(KFUPM),specifically under project#INHE2213。
文摘Aqueous organic redox flow batteries(RFBs)exhibit favorable characteristics,such as tunability,multielectron transfer capability,and stability of the redox active molecules utilized as anolytes and catholytes,making them very viable contenders for large-scale grid storage applications.Considerable attention has been paid on the development of efficient redox-active molecules and their performance optimization through chemical substitutions at various places on the backbone as part of the pursuit for high-performance RFBs.Despite the fact that electrodes are vital to optimal performance,they have not garnered significant attention.Limited research has been conducted on the effects of electrode modifications to improve the performance of RFBs.The primary emphasis has been given on the impact of electrode engineering to augment the efficiency of aqueous organic RFBs.An overview of electron transfer at the electrode-electrolyte interface is provided.The implications of electrode modification on the performance of redox flow batteries,with a particular focus on the anodic and cathodic half-cells separately,are then discussed.In each section,significant discrepancies surrounding the effects of electrode engineering are thoroughly examined and discussed.Finally,we have presented a comprehensive assessment along with our perspectives on the future trajectory.
基金the Natural Science Basic Research Program of Shaanxi(Grant No.2024JC-ZDXM-01)supported by the Youth Innovation Team of Shaanxi Universities(Title:Service Performance Evaluation of Energetic Materials)。
文摘The ReaxFF can describe the properties of energetic materials(EMs)at equilibrium state,but does not work properly in simulating high-energy particle irradiation process because of its weak short-range interaction.In this paper,a modification was made for such a potential by connecting ZieglerBiersack-Littmark(ZBL)potential to ReaxFF-lg through comparing to Density Functional Theory(DFT)results to accurately describe short-range interactions.After modification,the newly fitted ReaxFF-lg/ZBL potential predicts better the equation of state for EMs In displacement cascade simulations,comparing to results from ab initio molecular dynamics(AIMD),ReaxFF-lg/ZBL presented the similar transferred energy from a primary knock-on atom to surrounding atoms,better than the original ReaxFF-lg potential.Further large-scale displacement cascade simulations indicated ReaxFF-lg/ZBL could be applied for cascade simulations with PKA energy from less than 1 keV to high energy(e.g.35 keV)cases,which is suitable for effectively simulating high-energy displacement cascades in EMs using molecular dynamics method.
基金jointly supported by the Natural Science Foundations of China(No.22179020,12174057)Fujian Province’s“Young Eagle Program”Youth Top Talents Program。
文摘To meet the demand for high-performance LiCoO_(2) batteries,it is necessary to overcome challenges such as interface degradation and rapid capacity degradation caused by changes in bulk structure,especially under deep delithiation and high temperature conditions.The ion conductive coating layer of Li_(3)PO_(4) has been directly modified on the surface of LiCoO_(2) particles using magnetron sputtering method,significantly improving the lithium storage performance of LiCoO_(2)@Li_(3)PO_(4) composites.Compared to pure LiCoO_(2),the modified LiCoO_(2) sample exhibits obviously better cycle life and high-temperature performance.Especially,under the conditions of 2 and 1 C,the LiCoO_(2)@Li_(3)PO_(4) electrode delivers excellent cycling performance at high voltage of 4.5 V,with capacity retention rates of 89.7%and 75.7%at room temperature and high temperature of 45℃,being far greater than those of 12.3%and 29.1%for bare LiCoO_(2) electrodes.It is discovered that the Li_(3)PO_(4) coating layer not only effectively enhances interface compatibility and suppresses the irreversible phase transition of LiCoO_(2),but also further improves the Li^(+)transport kinetics and significantly reduces battery polarization,ultimately enabling the modified LiCoO_(2) electrode to exhibit excellent lithium storage performance and thermal safety characteristics under high voltage conditions.Thus,such effective modified strategy can undoubtedly provide an important academic inspiration for LiCoO_(2) implication.
文摘Based on a simplified model reference adaptive control(SMRAC) algorithm a parameter modification algorithm according to fuzzy laws is proposed in this paper. The method makes the adaptive parameters in SMRAC only rely on the status of performance error. Thus it eliminates the influences of gain coefficients in SMRAC and the amplitude of input signal on the dynamic characteristics. Experiments on various step amplitudes and loads show that the performances of SMRAC are improved by incorporating fuzzy modification method.
基金supported by Jiangsu Natural Science Foundation (No. BK2012347)the National High Technology and Development Program of China (863 Programs, No.2007AA061802)
文摘Catalytic properties of MnOx-FeOx complex oxide （hereafter denoted as Mn-Fe） catalysts modified with different loadings of chromium oxide were investigated by using the combination of physico-cbemical techniques, such as N2 physisorption, X-ray diffraction （XRD）, high-resolution transmission electron microscope （HRTEM）, in situ Fourier transform infrared spectroscopy （in situ FT-IR） and temperature-programmed reduction （TPR） and their catalytic activities were evaluated with the selective catalytic reduction （SCR） of NOx by NH3. It was found that with the addition of Cr, more NO could be removed in the low-temperature window （below 120 ℃）. Among the tested catalysts, Mn-Fe- Cr （2 ： 2 ： 1） catalyst exhibited the best catalytic performance at 80 ℃ with the NO conversion higher than 90%. The combination of the reaction and characterization results indicated that （1） the strong interaction among tertiary metal oxides existed in the catalysts when Cr was appropriately added, which made the active components better dispersed with less agglomeration and sintering and the largest BET specific surface area could be obtained; （2） Cr improved the low-temperature reducibility of the catalyst and promoted the formation of the active intermediate （-NH3＋）, which favored the low-temperature SCR reaction.
基金supported by the National Nature Science Foundation of China (50873026, 21106017)the Production and Research Prospective Joint Research Project (BY2009153)+1 种基金the Science and Technology Support Program (BE2008129) of Jiangsu Province of ChinaSpecialized Research Fund for the Doctoral Program of Higher Education of China (20100092120047)
文摘The catalytic properties of PtSn-based catalysts supported on siliceous SBA-15 and Al-modified SBA-15, such as Al-incorporated SBA-15 （AlSBA-15） and alumina-modified SBA-15 （Al2O3/SBA-15）, for propane dehydrogenation were investigated. Al2O3/SBA-15 was prepared either by an impregnation method using aluminum nitrate aqueous solution, or by the treatment of SBA-15 with a Al（OC3H7）3 solution in anhydrous toluene. N2-physisorption, FT-IR spectroscopy, solid-state 27Al MAS NMR spectroscopy, hydrogen chemisorption, XRF, NH3 temperature-programmed desorption, X-ray photoelectron spectroscopy and TPO were used to characterize these samples. Among these catalysts, the PtSn-based catalyst supported on Al2O3/SBA-15, which was grafted with Al（OC3H7）3, exhibited the best catalytic performance in terms of activity and stability The possible reason was due to the high Pt metal dispersion and/or the strong interactions among Pt, Sn, and the support.
基金the Science Development Foundation of the Engineering and Technical College of Chengdu University of Technology of China(Nos.C122007025,C122007018)
文摘Modification of the surface properties of polyethylene （PE） films is studied using air dielectric barrier discharge at atmospheric pressure. The treated samples are examined by Water contact angle measurements, Fourier transform infrared attenuated total reflection spectroscopy （FTIR-ATR）, X-ray photoelectron spectroscopy （XPS） and scanning electron microscopy （SEM）. With the increase in treating time, the water contact angle changes from 93.2° before treatment to a minimum of 53.3° after a treatment for 50 s. Both ATR and XPS results show some oxidized species are introduced into the sample surface by the plasma treatment and the tendency of the water contact angle with the treating time is the same as that of oxygen concentration on the treated sample surface. SEM result shows the surface roughness of PE samples increases with the treatment time increasing.
基金supported by the National Natural Science Foundation of China (Nos. 51172285, 51372277)the Fundamental Research Funds for the Central Universities (14CX02060A)the Natural Science Foundation of Shandong Province (ZR2011EL030)
文摘A bisphenol epoxy resin was used as modifier to increase the heat resistance of condensed poly-nuclear aromatic （COPNA） resin. The basic properties of COPNA resin and modified resin were characterized by Fourier transform infrared spectroscopy （FT-IR）, nuclear magnetic resonance spectroscopy （1H-NMR）, vapor pressure osmometry （VPO） and elemental analysis （EA）. Average structural parameters of resins were calculated by the improved Brown-Ladner method, and heat resistance of resins was tested by thermogravimetric analysis （TGA）. The chemical structure, mechanical properties and heat resistivity of the resin/graphite composites prepared with different resins were compared. The results show that the adhesive property and heat resistance of COPNA resin can be remarkably improved by addition of 5 wt.% epoxy resin. The reason is that the reactions between epoxy groups of epoxy resin and hydroxyl groups of COPNA resin improve the heat resistance and adhesive property of COPNA resin. Electric motor brushes with good mechanical properties and low electrical resistivity were successfully prepared by using the modified resin as binder.
基金supported by the National Natural Science Foundation of China (Grant no. 61705090)
文摘Conjugated polymers are commonly used as effective hole transport materials(HTMs) for preparation of high-performance perovskite solar cells. However, the hydrophobic nature of these materials renders it difficult to deposit photovoltaic perovskite layers on top via solution processing. In this article, we report a generic surface modification strategy that enables the deposition of uniform and dense perovskite films on top of non-wetting interfaces. In contrast to the previous proposed chemical modifications which might alter the optoelectronic properties of the interfacial layers, we realized a nondestructive surface modification enabled by introducing a layer of insulating mesoporous aluminum oxide(Al2O3). The surface energies of the typical non-wetting hole-transport layers(PTAA, P3 HT, and Poly-TPD) were significantly reduced by the Al2O3 modification. Benefiting from the intact optoelectronic properties of the HTMs, perovskite solar cells deposited on these interface materials show full open-circuit voltages( V OC) with high fill factors(FF) up to 80%. Our method provides an effective avenue for exploiting the full potential of the existing as well as newly developed non-wetting interface materials for the fabrication of high-performance inverted perovskite solar cells.
基金financial support from the National Natural Science Foundation of China (21776154)the National Basic Research Plan (2012AA051203)
文摘The performance of vanadium flow batteries （VFBs） is closely related to the materials used in the bipo- lar plates. Carbon-based composite bipolar plates are particularly suitable for VFB applications. However. most original preparation methods cannot simultaneously achieve good electrical conductivity and me- chanical performance. In this paper, we propose a novel approach to fabricating bipolar plates with car- bon plastic materials, including four steps, namely coating a poly （vinylidene fluoride） （PVDF） solution onto carbon felt, solvent evaporation, hot-pressing, and surface modification. The resulting bipolar plates showed high conductivity, good mechanical strength, and corrosion resistance. Surface modification by coating with carbon nanotubes （CNTs） removed the PVDF-rich layer from the surface of the carbon fibers. The high surface area of the CNT withdrew PVDF resin from the carbon fiber surface, and promoted the formation of a conductive network. The flexibility and battery charge-discharge cycle measurements showed that the composite bipolar plates can meet requirements for VFB applications.
基金financially supported by the National Key R&D Program of China(No.2018YFC0604702)the National Natural Science Foundation of China(No.51774284).
文摘Based on the problems caused by many oxygen-containing functional groups and poor floatability on the surface of low rank coal,the characteristics of low rank coal were analyzed systematically by means of scanning electron microscopy(SEM),X-ray diffraction(XRD)and X-Ray photoelectron spectroscopy(XPS)techniques.The bubble-particle induction time was used to determine the characterization of the bubble-particle attachment,and the bubble-particle attachment of low rank coal modified by soaking the coal samples in an acid or alkaline solution was analyzed.The floatability of the modified coal surface was verified by flotation tests.The results show that the particle size of 0.125–0.074 mm of the coal sample exhibited better bubble-particle attachment characteristics.The small bubble,the larger approach velocity of bubble and the larger bubble deformation were more helpful to enhance the bubbleparticle attachment.For an acid solution,the smaller the p H was and the longer the soaking time was,the better the floatability of the coal sample and the higher the combustible material recovery were.The combustible material recovery of low rank coal was increased to 78.79%by soaking the sample in an acid solution of pH=0 for 180 min.On the contrary there was a best concentration for the alkaline solution.
基金This paper was supported by Science Fund for Distin-guished Young Scholars, Heilongjiang Province (No. JC04-01)
文摘The larch wood was treated by microwave irradiation under different radiant intensity and treating duration. The microwave-treated wood specimens together with the un-treated for comparison were impregnated by water in pressure vessel and then tested for permeability, mechanical properties and microstructure change by SEM to study the modification performance of microwave treatment on larch wood. The results showed that under suitable conditions of microwave treatment the permeability of larch wood was improved without noticeable decreasing of the modulus of rupture （MOR） and the modulus of elasticity （MOE）. The radial parenchyma and some pit membrane were ruptured, and tiny cracks were formed in the cell walls. The formation of tiny cracks in the cell walls serves as man-made channels of gas and liquid and this contribute to improve the permeability of the wood.
基金the financial support provided by the Natural Sciences and Engineering Research Council of Canada(NSERC)
文摘Superhydrophobic aluminum surfaces have been prepared by means of electrodeposition of copper on aluminum surfaces, followed by electrochemical modification using stearic acid organic molecules. Scanning electron microscopy(SEM) images show that the electrodeposited copper films follow "island growth mode" in the form of microdots and their number densities increase with the rise of the negative deposition potentials. At an electrodeposition potential of-0.2 V the number density of the copper microdots are found to be 4.5×104cm^(-2)that are increased to 2.9×105cm^(-2)at a potential of-0.8 V. Systematically, the distances between the microdots are found to be reduced from 26.6 μm to 11.03 μm with the increase of negative electrochemical potential from-0.2 V to-0.8 V. X-ray diffraction(XRD) analyses have confirmed the formation of copper stearate on the stearic acid modified copper films. The roughness of the stearic acid modified electrodeposited copper films is found to increase with the increase in the density of the copper microdots. A critical copper deposition potential of-0.6 V in conjunction with the stearic acid modification provides a surface roughness of 6.2 μm with a water contact angle of 157?, resulting in superhydrophobic properties on the aluminum substrates.
文摘Carbon dioxide （CO2） adsorption on a standard metal-organic framework MIL-101 and a pentaethylenehexamine modified MIL-101 （PEHA- MIL-101） are investigated and compared in this study. The adsorbent samples were characterized by XRD, FT-IR and nitrogen adsorption- desorption isotherms analysis. CO2 adsorption capacity was measured by a volumetric method. MIL-101 and PEHA-MIL-101 exhibited CO2 adsorption capacities of 0.85 and 1.3 mmO1CO2/gadsorbent at 10 bar and 298 K, respectively. It is observed that CO2 adsorption capacity was fairly improved about 50% after amine modification.
基金supported by National Natural Science Foundation of China(No.50876077)
文摘Viscose-based activated carbon fibers （VACFs） were treated by a dielectric-barrier discharge plasma under the feed gas of N2. The surface functional groups of VACFs were modified to improve the adsorption and catalysis capacity for SO2. The surface properties of the untreated and plasma-treated VACFs were diagnosed by SEM, BET, FTIR, and XPS, and the adsorption capacities of VACFs for SO2 were also compared and discussed. The results show that after the plasma treatment, the external surface of VACFs was etched and became rougher, while the surface area and the total pore volume decreased. FTIR and XPS revealed that nitrogen atoms were introduced onto the VACFs surface and the distribution of functional groups on the VACFs surface was changed remarkably. The adsorption characteristic of SO2 indicates that the plasmatreated VACFs have better adsorption capacity than the original VACFs due to the nitrogen functional groups and new functional groups formed in modification, which is beneficial to the adsorption of SO2.
基金Supported by the Natural Science Foundation of China(81173257)
文摘Formation of malignant tumor originating from normal healthy cell is a multistep process including genetic and epigenetic lesions. Previous studies of cell line model systems displayed that early important epigenetic events happened in stepwise fashion prior to cell immortalization. Once these epigenetic alterations are integrated into chromatin, they will perform vertical propagation through cell subculture. Hence, status of epigenetics is dramatically important in maintaining of cell identity. Histone modification is another factor of epigenetic alterations during human oncogenesis. Histones, one of main components of chromatin, can be modified post-translationally. Histone tail modifications are regulated by corresponding modification enzymes. This review focuses on the description of relationship between the main sites of histone modification and oncogenesis.
