This paper deals with a cold standby repairman who can do extra work in idle time. The repairable system with two identical units and one authors are devoted to studying the unique existence and exponential stability ...This paper deals with a cold standby repairman who can do extra work in idle time. The repairable system with two identical units and one authors are devoted to studying the unique existence and exponential stability of the system solution. C0-semigroup theory is used to prove the existence of a unique nonnegative time-dependent solution of the system. Then by using the theory of resolvent positive operator, the authors derive that dynamic solution of the system exponentially converges to its steady-state one which is the eigenfunction corresponding to eigenvalue 0 of the system operator. Some reliability indices of the system are discussed with a different method from traditional one. The authors also make a profit analysis to determine the optimal service time outside the system to maximize the system profit.展开更多
Porcelain cap and pin insulators are by far the most popular suspension insulators in high voltage(HV) distribution networks all around the world.Inspection and condition monitoring of HV insulators is also very impor...Porcelain cap and pin insulators are by far the most popular suspension insulators in high voltage(HV) distribution networks all around the world.Inspection and condition monitoring of HV insulators is also very important to the utility companies because of the critical and vital role that they play in distribution systems.In terms of safety, practicality and ease of use,remote detection methods are more popular among the line technicians.A new remote condition assessment method based on electromagnetic radiations from porcelain insulators is presented in this paper. In a lab environment,a string of two porcelain insulators is energized by a 45 kV transformer.Electromagnetic radiations due to the partial discharge activities inside the porcelain insulator are captured by passive sensors and antennas. Two cases of defective insulators on a two insulator string are studied here.The first case focuses on the effect of contaminated porcelain shells on radiation signature of partial discharges.A polluted porcelain shell with ESDD level of 0.03 mg/cm^2 was first tested.The second case studies the effect of cracks of an intentionally-cracked porcelain shell. The cracked insulator is also tested on a two insulator string.To compare the partial discharge radiation signature of different faulty insulators,phase resolved graphs were developed.The electromagnetic radiated signature of a polluted insulator and a cracked insulator was calculated and compared using phase resolved graphs.展开更多
A discrete dislocation plasticity analysis of dispersion strengthening in oxide dispersion strengthened(ODS) steels was described. Parametric dislocation dynamics(PDD) simulation of the interaction between an edge dis...A discrete dislocation plasticity analysis of dispersion strengthening in oxide dispersion strengthened(ODS) steels was described. Parametric dislocation dynamics(PDD) simulation of the interaction between an edge dislocation and randomly distributed spherical dispersoids(Y2O3) in bcc iron was performed for measuring the influence of the dispersoid distribution on the critical resolved shear stress(CRSS). The dispersoid distribution was made using a method mimicking the Ostwald growth mechanism. Then, an edge dislocation was introduced, and was moved under a constant shear stress condition. The CRSS was extracted from the result of dislocation velocity under constant shear stress using the mobility(linear) relationship between the shear stress and the dislocation velocity. The results suggest that the dispersoid distribution gives a significant influence to the CRSS, and the influence of dislocation dipole, which forms just before finishing up the Orowan looping mechanism, is substantial in determining the CRSS, especially for the interaction with small dispersoids. Therefore, the well-known Orowan equation for determining the CRSS cannot give an accurate estimation, because the influence of the dislocation dipole in the process of the Orowan looping mechanism is not accounted for in the equation.展开更多
Multi-modality medical image fusion has more and more important applications in medical image analysis and understanding. In this paper, we develop and apply a multi-resolution method based on wavelet pyramid to fuse ...Multi-modality medical image fusion has more and more important applications in medical image analysis and understanding. In this paper, we develop and apply a multi-resolution method based on wavelet pyramid to fuse medical images from different modalities such as PET-MRI and CT-MRI. In particular, we evaluate the different fusion results when applying different selection rules and obtain optimum combination of fusion parameters.展开更多
Labeling of the connected components is the key operation of the target recognition and segmentation in remote sensing images.The conventional connected-component labeling(CCL) algorithms for ordinary optical images a...Labeling of the connected components is the key operation of the target recognition and segmentation in remote sensing images.The conventional connected-component labeling(CCL) algorithms for ordinary optical images are considered time-consuming in processing the remote sensing images because of the larger size.A dynamic run-length based CCL algorithm(Dy RLC) is proposed in this paper for the large size,big granularity sparse remote sensing image,such as space debris images and ship images.In addition,the equivalence matrix method is proposed to help design the pre-processing method to accelerate the equivalence labels resolving.The result shows our algorithm outperforms 22.86% on execution time than the other algorithms in space debris image dataset.The proposed algorithm also can be implemented on the field programming logical array(FPGA) to enable the realization of the real-time processing on-board.展开更多
The reduction of wasteful variation within the supp ly chain is naturally suited to high and stable volumes, as epitomised in the lean practices of the automotive industry. However, with the growth of innovative pr od...The reduction of wasteful variation within the supp ly chain is naturally suited to high and stable volumes, as epitomised in the lean practices of the automotive industry. However, with the growth of innovative pr oducts, typically characterised by lower volumes and uncertain demand, it is als o important to develop strategies to effectively manage the externally imposed v ariation resulting from volatile market demand. Such strategies often come under the banner of quick response or agile supply. System variation is the common denominator, for whereas lean strategies emphasis e the need for stability and the reduction of wasteful supply chain variation, a gile emphasises the need to respond to externally imposed demand variation. Simi larly, lean supply is closely associated with level scheduling and investing in inventory to decouple demand variation from the supply chain, whereas, agile sup ply is associated with investing in responsive capacity as inventory requirement s cannot be effectively predicted. This distinction between lean and agile supply, highlights a trade-off between investing in responsive capacity and decoupling inventory, which is closely related to the conflicting manufacturing tasks of fast response and low cost. The implications of this conflict have been more widely felt in recent years, as companies have opted to outsource manufacture to low cost overseas suppliers. T he rationale is to reduce manufacturing costs, but the trade-off is a dramatic loss of responsive capacity with higher dependency on decoupling inventory. As with lean and agile supply, the trade-off implications of such choices need to be acknowledged, conceptually understood and then separate out or otherwise r esolved. This paper introduces the business need before exploring the significance of var iation and the concept of managing variation in a delivery system using responsi ve capacity and decoupling inventory. These concepts will then be used to unpack the lean and agile paradigms before applying the thinking to a more detailed in dustrial case concerning offshore supply decisions. The paper concludes with som e reflections.展开更多
This paper presents a modified multi-resolution telescopic search algorithm (MRTlcSA) for the block-matching motion estimation. A novel inverse telescopic search is substituted for the conventional telescopic search, ...This paper presents a modified multi-resolution telescopic search algorithm (MRTlcSA) for the block-matching motion estimation. A novel inverse telescopic search is substituted for the conventional telescopic search, that reduces the on-chip memory size and memory bandwidth for VLSI implementation. In addition, strategies of motion track and adaptive search window are applied to reduce the computational complexity of motion estimation. Simulation results show that, compared with the MRTleSA, the proposed algorithm reduces the computational load to only 30% while preserving almost the same image quality. Comparisons on hardware cost and power consumption of the VLSI implementations using the two algorithms are also presented in the paper.展开更多
With the advances of display technology, three-dimensional(3-D) imaging systems are becoming increasingly popular. One way of stimulating 3-D perception is to use stereo pairs, a pair of images of the same scene acqui...With the advances of display technology, three-dimensional(3-D) imaging systems are becoming increasingly popular. One way of stimulating 3-D perception is to use stereo pairs, a pair of images of the same scene acquired from different perspectives. Since there is an inherent redundancy between the images of a stereo pairs, data compression algorithms should be employed to represent stereo pairs efficiently. The proposed techniques generally use block-based disparity compensation. In order to get the higher compression ratio, this paper employs the wavelet-based mixed-resolution coding technique to incorporate with SPT-based disparity-compensation to compress the stereo image data. The mixed-resolution coding is a perceptually justified technique that is achieved by presenting one eye with a low-resolution image and the other with a high-resolution image. Psychophysical experiments show that the stereo image pairs with one high-resolution image and one low-resolution image provide almost the same stereo depth to that of a stereo image with two high-resolution images. By combining the mixed-resolution coding and SPT-based disparity-compensation techniques, one reference (left) high-resolution image can be compressed by a hierarchical wavelet transform followed by vector quantization and Huffman encoder. After two level wavelet decompositions, for the low-resolution right image and low-resolution left image, subspace projection technique using the fixed block size disparity compensation estimation is used. At the decoder, the low-resolution right subimage is estimated using the disparity from the low-resolution left subimage. A full-size reconstruction is obtained by upsampling a factor of 4 and reconstructing with the synthesis low pass filter. Finally, experimental results are presented, which show that our scheme achieves a PSNR gain (about 0.92dB) as compared to the current block-based disparity compensation coding techniques.展开更多
基金supported by the National Natural Science Foundation of China under Grant No.11201007
文摘This paper deals with a cold standby repairman who can do extra work in idle time. The repairable system with two identical units and one authors are devoted to studying the unique existence and exponential stability of the system solution. C0-semigroup theory is used to prove the existence of a unique nonnegative time-dependent solution of the system. Then by using the theory of resolvent positive operator, the authors derive that dynamic solution of the system exponentially converges to its steady-state one which is the eigenfunction corresponding to eigenvalue 0 of the system operator. Some reliability indices of the system are discussed with a different method from traditional one. The authors also make a profit analysis to determine the optimal service time outside the system to maximize the system profit.
文摘Porcelain cap and pin insulators are by far the most popular suspension insulators in high voltage(HV) distribution networks all around the world.Inspection and condition monitoring of HV insulators is also very important to the utility companies because of the critical and vital role that they play in distribution systems.In terms of safety, practicality and ease of use,remote detection methods are more popular among the line technicians.A new remote condition assessment method based on electromagnetic radiations from porcelain insulators is presented in this paper. In a lab environment,a string of two porcelain insulators is energized by a 45 kV transformer.Electromagnetic radiations due to the partial discharge activities inside the porcelain insulator are captured by passive sensors and antennas. Two cases of defective insulators on a two insulator string are studied here.The first case focuses on the effect of contaminated porcelain shells on radiation signature of partial discharges.A polluted porcelain shell with ESDD level of 0.03 mg/cm^2 was first tested.The second case studies the effect of cracks of an intentionally-cracked porcelain shell. The cracked insulator is also tested on a two insulator string.To compare the partial discharge radiation signature of different faulty insulators,phase resolved graphs were developed.The electromagnetic radiated signature of a polluted insulator and a cracked insulator was calculated and compared using phase resolved graphs.
文摘A discrete dislocation plasticity analysis of dispersion strengthening in oxide dispersion strengthened(ODS) steels was described. Parametric dislocation dynamics(PDD) simulation of the interaction between an edge dislocation and randomly distributed spherical dispersoids(Y2O3) in bcc iron was performed for measuring the influence of the dispersoid distribution on the critical resolved shear stress(CRSS). The dispersoid distribution was made using a method mimicking the Ostwald growth mechanism. Then, an edge dislocation was introduced, and was moved under a constant shear stress condition. The CRSS was extracted from the result of dislocation velocity under constant shear stress using the mobility(linear) relationship between the shear stress and the dislocation velocity. The results suggest that the dispersoid distribution gives a significant influence to the CRSS, and the influence of dislocation dipole, which forms just before finishing up the Orowan looping mechanism, is substantial in determining the CRSS, especially for the interaction with small dispersoids. Therefore, the well-known Orowan equation for determining the CRSS cannot give an accurate estimation, because the influence of the dislocation dipole in the process of the Orowan looping mechanism is not accounted for in the equation.
基金the National Natural Science Foundation of China (No. 19675005).
文摘Multi-modality medical image fusion has more and more important applications in medical image analysis and understanding. In this paper, we develop and apply a multi-resolution method based on wavelet pyramid to fuse medical images from different modalities such as PET-MRI and CT-MRI. In particular, we evaluate the different fusion results when applying different selection rules and obtain optimum combination of fusion parameters.
文摘Labeling of the connected components is the key operation of the target recognition and segmentation in remote sensing images.The conventional connected-component labeling(CCL) algorithms for ordinary optical images are considered time-consuming in processing the remote sensing images because of the larger size.A dynamic run-length based CCL algorithm(Dy RLC) is proposed in this paper for the large size,big granularity sparse remote sensing image,such as space debris images and ship images.In addition,the equivalence matrix method is proposed to help design the pre-processing method to accelerate the equivalence labels resolving.The result shows our algorithm outperforms 22.86% on execution time than the other algorithms in space debris image dataset.The proposed algorithm also can be implemented on the field programming logical array(FPGA) to enable the realization of the real-time processing on-board.
文摘The reduction of wasteful variation within the supp ly chain is naturally suited to high and stable volumes, as epitomised in the lean practices of the automotive industry. However, with the growth of innovative pr oducts, typically characterised by lower volumes and uncertain demand, it is als o important to develop strategies to effectively manage the externally imposed v ariation resulting from volatile market demand. Such strategies often come under the banner of quick response or agile supply. System variation is the common denominator, for whereas lean strategies emphasis e the need for stability and the reduction of wasteful supply chain variation, a gile emphasises the need to respond to externally imposed demand variation. Simi larly, lean supply is closely associated with level scheduling and investing in inventory to decouple demand variation from the supply chain, whereas, agile sup ply is associated with investing in responsive capacity as inventory requirement s cannot be effectively predicted. This distinction between lean and agile supply, highlights a trade-off between investing in responsive capacity and decoupling inventory, which is closely related to the conflicting manufacturing tasks of fast response and low cost. The implications of this conflict have been more widely felt in recent years, as companies have opted to outsource manufacture to low cost overseas suppliers. T he rationale is to reduce manufacturing costs, but the trade-off is a dramatic loss of responsive capacity with higher dependency on decoupling inventory. As with lean and agile supply, the trade-off implications of such choices need to be acknowledged, conceptually understood and then separate out or otherwise r esolved. This paper introduces the business need before exploring the significance of var iation and the concept of managing variation in a delivery system using responsi ve capacity and decoupling inventory. These concepts will then be used to unpack the lean and agile paradigms before applying the thinking to a more detailed in dustrial case concerning offshore supply decisions. The paper concludes with som e reflections.
文摘This paper presents a modified multi-resolution telescopic search algorithm (MRTlcSA) for the block-matching motion estimation. A novel inverse telescopic search is substituted for the conventional telescopic search, that reduces the on-chip memory size and memory bandwidth for VLSI implementation. In addition, strategies of motion track and adaptive search window are applied to reduce the computational complexity of motion estimation. Simulation results show that, compared with the MRTleSA, the proposed algorithm reduces the computational load to only 30% while preserving almost the same image quality. Comparisons on hardware cost and power consumption of the VLSI implementations using the two algorithms are also presented in the paper.
基金This project was supported by the National Natural Science Foundation (No. 69972027).
文摘With the advances of display technology, three-dimensional(3-D) imaging systems are becoming increasingly popular. One way of stimulating 3-D perception is to use stereo pairs, a pair of images of the same scene acquired from different perspectives. Since there is an inherent redundancy between the images of a stereo pairs, data compression algorithms should be employed to represent stereo pairs efficiently. The proposed techniques generally use block-based disparity compensation. In order to get the higher compression ratio, this paper employs the wavelet-based mixed-resolution coding technique to incorporate with SPT-based disparity-compensation to compress the stereo image data. The mixed-resolution coding is a perceptually justified technique that is achieved by presenting one eye with a low-resolution image and the other with a high-resolution image. Psychophysical experiments show that the stereo image pairs with one high-resolution image and one low-resolution image provide almost the same stereo depth to that of a stereo image with two high-resolution images. By combining the mixed-resolution coding and SPT-based disparity-compensation techniques, one reference (left) high-resolution image can be compressed by a hierarchical wavelet transform followed by vector quantization and Huffman encoder. After two level wavelet decompositions, for the low-resolution right image and low-resolution left image, subspace projection technique using the fixed block size disparity compensation estimation is used. At the decoder, the low-resolution right subimage is estimated using the disparity from the low-resolution left subimage. A full-size reconstruction is obtained by upsampling a factor of 4 and reconstructing with the synthesis low pass filter. Finally, experimental results are presented, which show that our scheme achieves a PSNR gain (about 0.92dB) as compared to the current block-based disparity compensation coding techniques.
