Due to the complex high-temperature characteristics of hydrocarbon fuel,the research on the long-term working process of parallel channel structure under variable working conditions,especially under high heat-mass rat...Due to the complex high-temperature characteristics of hydrocarbon fuel,the research on the long-term working process of parallel channel structure under variable working conditions,especially under high heat-mass ratio,has not been systematically carried out.In this paper,the heat transfer and flow characteristics of related high temperature fuels are studied by using typical engine parallel channel structure.Through numeri⁃cal simulation and systematic experimental verification,the flow and heat transfer characteristics of parallel chan⁃nels under typical working conditions are obtained,and the effectiveness of high-precision calculation method is preliminarily established.It is known that the stable time required for hot start of regenerative cooling engine is about 50 s,and the flow resistance of parallel channel structure first increases and then decreases with the in⁃crease of equivalence ratio(The following equivalence ratio is expressed byΦ),and there is a flow resistance peak in the range ofΦ=0.5~0.8.This is mainly caused by the coupling effect of high temperature physical proper⁃ties,flow rate and pressure of fuel in parallel channels.At the same time,the cooling and heat transfer character⁃istics of parallel channels under some conditions of high heat-mass ratio are obtained,and the main factors affect⁃ing the heat transfer of parallel channels such as improving surface roughness and strengthening heat transfer are mastered.In the experiment,whenΦis less than 0.9,the phenomenon of local heat transfer enhancement and deterioration can be obviously observed,and the temperature rise of local structures exceeds 200℃,which is the risk of structural damage.Therefore,the reliability of long-term parallel channel structure under the condition of high heat-mass ratio should be fully considered in structural design.展开更多
Large-area two-dimensional(2D)materials,such as graphene,MoS_(2),WS_(2),h-BN,black phosphorus,and MXenes,are a class of advanced materials with many possible applications.Different applications need different substrat...Large-area two-dimensional(2D)materials,such as graphene,MoS_(2),WS_(2),h-BN,black phosphorus,and MXenes,are a class of advanced materials with many possible applications.Different applications need different substrates,and each substrate may need a different way of transferring the 2D material onto it.Problems such as local stress concentrations,an uneven surface tension,inconsistent adhesion,mechanical damage and contamination during the transfer can adversely affect the quality and properties of the transferred material.Therefore,how to improve the integrity,flatness and cleanness of large area 2D materials is a challenge.In order to achieve high-quality transfer,the main concern is to control the interface adhesion between the substrate,the 2D material and the transfer medium.This review focuses on this topic,and finally,in order to promote the industrial use of large area 2D materials,provides a recipe for this transfer process based on the requirements of the application,and points out the current problems and directions for future development.展开更多
As the dominant seepage channel in rock masses,it is of great significance to study the influence of fracture roughness distribution on seepage and heat transfer in rock masses.In this paper,the fracture roughness dis...As the dominant seepage channel in rock masses,it is of great significance to study the influence of fracture roughness distribution on seepage and heat transfer in rock masses.In this paper,the fracture roughness distribution functions of the Bakhtiary dam site and Oskarshamn/Forsmark mountain were fitted using statistical methods.The COMSOL Multiphysics finite element software was utilized to analyze the effects of fracture roughness distribution types and empirical formulas for fracture hydraulic aperture on the seepage field and temperature field of rock masses.The results show that:(1)The fracture roughness at the Bakhtiary dam site and Oskarshamn/Forsmark mountain follows lognormal and normal distributions,respectively;(2)For rock masses with the same expected value and standard deviation of fracture roughness,the outflow from rock masses with lognormal distribution of fracture roughness is significantly larger than that of rock masses with normal distribution of fracture roughness;(3)The fracture hydraulic aperture,outflow,and cold front distance of the Li and Jiang model are significantly larger than those of the Barton model;(4)The outflow,hydraulic pressure distribution,and temperature distribution of the Barton model are more sensitive to the fracture roughness distribution type than those of the Li and Jiang model.展开更多
The effects of projectile/target impedance matching and projectile shape on energy,momentum transfer and projectile melting during collisions are investigated by numerical simulation.By comparing the computation resul...The effects of projectile/target impedance matching and projectile shape on energy,momentum transfer and projectile melting during collisions are investigated by numerical simulation.By comparing the computation results with the experimental results,the correctness of the calculation and the statistical method of momentum transfer coefficient is verified.Different shapes of aluminum,copper and heavy tungsten alloy projectiles striking aluminum,basalt,and pumice target for impacts up to 10 km/s are simulated.The influence mechanism of the shape of the projectile and projectile/target density on the momentum transfer was obtained.With an increase in projectile density and length-diameter ratio,the energy transfer time between the projectile and targets is prolonged.The projectile decelerates slowly,resulting in a larger cratering depth.The energy consumed by the projectile in the excavation stage increased,resulting in lower mass-velocity of ejecta and momentum transfer coefficient.The numerical simulation results demonstrated that for different projectile/target combinations,the higher the wave impedance of the projectile,the higher the initial phase transition velocity and the smaller the mass of phase transition.The results can provide theoretical guidance for kinetic impactor design and material selection.展开更多
Broadband near-infrared(NIR)luminescent materials have shown great promise in applications such as optical communication,biomedicine,and optoelectronic devices.However,the current research is focused on phos⁃phors and...Broadband near-infrared(NIR)luminescent materials have shown great promise in applications such as optical communication,biomedicine,and optoelectronic devices.However,the current research is focused on phos⁃phors and glasses,and it is important to develop broadband NIR luminescent nanomaterials.Here,we report an erbi⁃um-sensitized core-shell nanocrystal design for broadband NIR emission.Based on the structural design with suitable dopings of Tm^(3+)and Ho^(3+),the broadband NIR emission covering 1.5-2.1μm region is achieved under 980 nm and 808 nm excitations.Moreover,the emission intensity is further enhanced by introducing Yb^(3+)and Nd^(3+)into the sam⁃ple,respectively,and the energy transfer processes between them are systematically discussed.Our results present a novel approach for developing broadband NIR luminescent materials and devices.展开更多
Effect of flip chip bonding parameters on microstructure at the interconnect interface and shear properties of 64.8Sn35.2Pb microbumps were investigated in this work.Results show that the main intermetallic compound(I...Effect of flip chip bonding parameters on microstructure at the interconnect interface and shear properties of 64.8Sn35.2Pb microbumps were investigated in this work.Results show that the main intermetallic compound(IMC)at the interconnect interface is(Ni,Cu)_(3)Sn_(4)phase,and meanwhile a small amount of(Cu,Ni)_(6)Sn_(5)phase with a size of 50−100 nm is formed around(Ni,Cu)_(3)Sn_(4)phase.The orientation relationship of[-1-56](Ni,Cu)_(3)Sn_(4)//[152](Cu,Ni)_(6)Sn_(5)and(601)(Ni,Cu)_(3)Sn_(4)//(-201)(Cu,Ni)_(6)Sn_(5)is found between these two phases,and the atomic matching at the interface of the two phases is low.The highest shear force of 77.3 gf is achieved in the 64.8Sn35.2Pb microbump at the peak temperature of 250℃and parameter V1 because dense IMCs and no cracks form at the interconnect interface.Two typical fracture modes of microbumps are determined as solder fracture and mixed fracture.The high thermal stress presenting in the thick IMCs layer induces crack initiation,and cracks propagate along theα/βphase boundaries in the Sn-Pb solder under shear force,leading to a mixed fracture mode in the microbumps.展开更多
The ammunition loading system manipulator is susceptible to gear failure due to high-frequency,heavyload reciprocating motions and the absence of protective gear components.After a fault occurs,the distribution of fau...The ammunition loading system manipulator is susceptible to gear failure due to high-frequency,heavyload reciprocating motions and the absence of protective gear components.After a fault occurs,the distribution of fault characteristics under different loads is markedly inconsistent,and data is hard to label,which makes it difficult for the traditional diagnosis method based on single-condition training to generalize to different conditions.To address these issues,the paper proposes a novel transfer discriminant neural network(TDNN)for gear fault diagnosis.Specifically,an optimized joint distribution adaptive mechanism(OJDA)is designed to solve the distribution alignment problem between two domains.To improve the classification effect within the domain and the feature recognition capability for a few labeled data,metric learning is introduced to distinguish features from different fault categories.In addition,TDNN adopts a new pseudo-label training strategy to achieve label replacement by comparing the maximum probability of the pseudo-label with the test result.The proposed TDNN is verified in the experimental data set of the artillery manipulator device,and the diagnosis can achieve 99.5%,significantly outperforming other traditional adaptation methods.展开更多
As the performance of the box-type multiple launch rocket system(BMLRS)improves,its mechanical structures,particularly the plane clearance design between the slider on the rocket and the guide inside the launch canist...As the performance of the box-type multiple launch rocket system(BMLRS)improves,its mechanical structures,particularly the plane clearance design between the slider on the rocket and the guide inside the launch canister,have grown increasingly complex.However,deficiencies still exist in the current launch modeling theory for BMLRS.In this study,a multi-rigid-flexible-body launch dynamics model coupling the launch platform and rocket was established using the multibody system transfer matrix method and the Newton-Euler formulation.Furthermore,considering the bending of the launch canister,a detection algorithm for slider-guide plane clearance contact was proposed.To quantify the contact force and friction effect between the slider and guide,the contact force model and modified Coulomb model were introduced.Both the modal and launch tests were conducted.Additionally,the modal convergence was verified.By comparing the modal experiments and simulation results,the maximum relative error of the eigenfrequency is 3.29%.thereby verifying the accuracy of the developed BMLRS dynamics model.Furthermore,the launch test validated the proposed plane clearance contact model.Moreover,the study investigated the influence of various model parameters on the dynamic characteristics of BMLRS,including launch canister bending stiffness,slider and guide material,slider-guide clearance,slider length and layout.This analysis of influencing factors provides a foundation for future optimization in BMLRS design.展开更多
Single-entity collisional electrochemistry(SECE)is a branch of single-entity electrochemistry.It can directly characterize entities/particles with single particle resolution through random collisions between particles...Single-entity collisional electrochemistry(SECE)is a branch of single-entity electrochemistry.It can directly characterize entities/particles with single particle resolution through random collisions between particles and electrodes in a solution,and obtain rich physicochemical information,thus becoming one of the frontiers of electroanalytical chemistry in the past two decades.Interestingly,the(micro/nanoscale)sensing electrodes have evolved from a polarizable liquid/liquid(mercury/liquid)interface to a solid/liquid interface and then to a liquid/liquid interface(i.e.,an interface between twoimmiscible electrolyte solutions,ITIES),as if they have completed a cycle(but in fact they have not).ITIES has become the latest sensing electrode in the booming SECE due to its polarizability(up to 1.1 V at the water/a,a,a-trifluorotoluene interface)and high reproducibility.The four measurement modes(direct electrolysis,mediated electrolysis,current blockade,and charge displacement)developed in the realm of SECE at solid/liquid interfaces have also been fully realized at the miniature ITIES.This article will discuss these four modes at the ITIES from the perspectives of basic concepts,operating mechanisms,and latest developments(e.g.,discovery of ionosomes,blockade effect of Faradaic ion transfer,etc.),and look forward to the future development and direction of this emerging field.展开更多
Two-dimensional(2D)transition metal dichalcogenides(TMDs)and their heterostructures(HSs)exhibit unique optical properties and show great promise for developing next-generation optoelectronics.However,the photo-lumines...Two-dimensional(2D)transition metal dichalcogenides(TMDs)and their heterostructures(HSs)exhibit unique optical properties and show great promise for developing next-generation optoelectronics.However,the photo-luminescence(PL)quantum yield of monolayer(1L)TMDs is still quite low at room temperature,which severely lim-its their practical applications.Here we report a PL enhancement effect of 1L WS_(2) at room temperature when con-structing it into 1L-WS_(2)/hBN/1L-MoS_(2) vertical HSs.The PL enhancement factors(EFs)can be up to 4.2.By using transient absorption(TA)spectroscopy,we demonstrate that the PL enhancement effect is due to energy transfer from 1L MoS_(2) to 1L WS_(2).The energy transfer process occurs on a picosecond timescale and lasts more than one hundred picoseconds which indicates a prominent contribution from exciton-exciton annihilation.Furthermore,the PL en-hancement effect of 1L WS_(2) can be observed in 2L-MoS_(2)/hBN/1L-WS_(2) and 3L-MoS_(2)/hBN/1L-WS_(2) HSs.Our study provides a comprehensive understanding of the energy transfer process in the PL enhancement of 2D TMDs and a fea-sible way to optimize the performance of TMD-based optoelectronic devices.展开更多
Machine-learning methodologies have increasingly been embraced in landslide susceptibility assessment.However,the considerable time and financial burdens of landslide inventories often result in persistent data scarci...Machine-learning methodologies have increasingly been embraced in landslide susceptibility assessment.However,the considerable time and financial burdens of landslide inventories often result in persistent data scarcity,which frequently impedes the generation of accurate and informative landslide susceptibility maps.Addressing this challenge,this study compiled a nationwide dataset and developed a transfer learning-based model to evaluate landslide susceptibility in the Chongqing region specifically.Notably,the proposed model,calibrated with the warmup-cosine annealing(WCA)learning rate strategy,demonstrated remarkable predictive capabilities,particularly in scenarios marked by data limitations and when training data were normalized using parameters from the source region.This is evidenced by the area under the receiver operating characteristic curve(AUC)values,which exhibited significant improvements of 51.00%,24.40%and 2.15%,respectively,compared to a deep learning model,in contexts where only 1%,5%and 10%of data from the target region were used for retraining.Simultaneously,there were reductions in loss of 16.12%,27.61%and 15.44%,respectively,in these instances.展开更多
In this study, the laminar heat transfer and nanofluid flow between two porous horizontal concentric cylinders was investigated. The problem is investigated in two different geometries and the Re=10, 25, 50, 75, 100 a...In this study, the laminar heat transfer and nanofluid flow between two porous horizontal concentric cylinders was investigated. The problem is investigated in two different geometries and the Re=10, 25, 50, 75, 100 and volume fraction 0, 0.2%, 0.5%, 2% and 5% that related to copper nanoparticles, and porous medium porosity of 0.5 and 0.9. Compared to the first geometry, the convective coefficient in the second geometry increases by 8.3%, 7% and 5.5% at Reynolds numbers of 100, 75 and 50, respectively. Comparison of the outlet temperatures for two heat fluxes of 300 and 1200 W/m^2 indicates a 2.5% temperature growth by a fourfold increase in the heat fluxes. Also, the higher Nusselt number is associated with the second geometry occurring at porosities of 0.9 and 0.5, respectively. In both geometries, the Nusselt number values at the porosity of 0.9 are higher, which is due to the increased nanofluid convection at higher porosities. The velocity of the nanofluid experiences a two-fold increase at the outlet compared to its inlet velocity in the first geometry and for both porosities. Similarly, a three-fold increase was achieved in the second geometry and for both porosities.展开更多
The relation between human and crop resources belongs to the ethic of resources exploitation. The purposes of discussing the ethic of crop resources are to protect the ecology and safety of crops, to gain sustainable ...The relation between human and crop resources belongs to the ethic of resources exploitation. The purposes of discussing the ethic of crop resources are to protect the ecology and safety of crops, to gain sustainable development, furthermore, to choose and form the production structure that is favorable to saving crop resources and protecting the ecology of crops. Plant genetic engineering is the technology of molecule breeding of rearrangement of inheritance materials at the level of molecule directionally, of improving plant properties and of breeding high quality and yield varieties of crops. The prominent effects of the technology on the crop ecological system are human subjective factors increasing as well as violating the nature and intensifying the conflict between human being and nature. Therefore, in plant genetic engineering, crop resources exploitation should follow certain ethic principles. Under the theory of ethics of natural resources, by the means of biologinal-statistics, the author systematically analyzed the possible model of crop resources transfer between generations as well as the transfer mode of magnitude of real materials and magnitude of value.展开更多
The oblique transfer zone in the Fushan Sag, a syndepositional dome sandwiched between the Bailian and Huangtong sub-sags, has been the most important exploration target. The major oil observation occurs in the E_2l_1...The oblique transfer zone in the Fushan Sag, a syndepositional dome sandwiched between the Bailian and Huangtong sub-sags, has been the most important exploration target. The major oil observation occurs in the E_2l_1^(L+M) and the E_2l_3~U. 46 oil and rock samples reveal that the oil in the transfer zone is mostly contributed by the Bailian sub-sag, though the source rock conditions, hydrocarbon generation and expulsion histories of the Bailian and Huangtong sub-sags are similar. The E_2l_3~U oil, characterized by high maturity, Pr/Ph ratio and oleanane/C_(30)-hopane ratio, shows a close genetic affinity with the E_2l_3~b source rocks, while the E_2l_1^(L+M) oil, characterized by lower maturity, Pr/Ph ratio and oleanane/C_(30)-hopane ratio, is suggested to be derived from the E_2l_(1+2)~b source rocks. The homogenization temperatures of aqueous fluid inclusions, taking the burial history of the reservoirs into account, reflect that the oil charge mainly occurred from mid-Miocene to Pliocene in the oblique transfer zone. The oil transporting passages include connected sand bodies, unconformities and faults in the Fushan Sag. Of these, the faults are the most complicated and significant. The faults differ sharply in the west area, the east area and the oblique transfer zone, resulting in different influence on the oil migration and accumulation. During the main hydrocarbon charge stage, the faults in the west area are characterized by bad vertical sealing and spatially dense distribution. As a result, the oil generated by the Huangtong source rocks is mostly lost along the faults during the vertical migration in the west area. This can be the mechanism proposed to explain the little contribution of the Huangtong source rocks to the oil in the oblique transfer zone. Eventually, an oil migration and accumulation model is built in the oblique transfer zone, which may provide theoretical and practical guides for the oil exploration.展开更多
The supported isolated Pt atoms(Pt iso)and other rare metals have attracted intensive concern due to their maximized metal utilization efficiency,unique reactivity or selectivity,connection to organometallic catalysis...The supported isolated Pt atoms(Pt iso)and other rare metals have attracted intensive concern due to their maximized metal utilization efficiency,unique reactivity or selectivity,connection to organometallic catalysis and the potential for making well-defined active sites[1-3].As catalytic active sites,oxide-supported isolated Pt-group metal atoms are well known for their unique reactivity and efficient metal utilization[4-6].Even continuous efforts have been made,it is still challenging to characterize the intrinsic ca-talytic activity of these dispersed active sites on oxide supports at a level that relates local electronic and geometric structure to function,because of their atomic dispersion,heterogeneity in the local coordination,dynamic changes in local coordination under reactive environments and low loading of metal[7-9].展开更多
The appearance and hair color between these two subspecies Rattus rattus Sladeni and R.r. Hainanicus are similar to each other. Their most major distinctive characteristic is the length ratio of tail to body. However,...The appearance and hair color between these two subspecies Rattus rattus Sladeni and R.r. Hainanicus are similar to each other. Their most major distinctive characteristic is the length ratio of tail to body. However, this characteristic was unstable in some measuring records. In Guangdong, R.r. Hainanicus is restrictedly distributed in the west region, and R.r. Sladeni is widely distributed in the other regions of this province. In this study, we detected the sequences of mitochondrial 12S rRNA gene fragments of 9 samples from R.r. Hainanicus and R.r. Sladeni (Longmen and Hong Kong populations). These 385 nucleotide positions of 12S rRNA gene fragment include 26 variable sites and 14 parsimony-informative sites. 3 insertion/deletion sites are observed. The phylogenetic relationships among these samples were constructed by Neighbor-joining and Maximum parsimony methods. The analysis shows that R.r. Hainanicus is more closely relative to the Longmen population of R.r. Sladeni than to the Hong Kong population of R.r. Sladeni. The sequencing analysis of 12S rRNA gene fragments is not agreement on the classification of subspecies R. r. Hainanicus inferred from the morphology and geographical distribution. The morphological variation of R.r. Hainanicus should result from the natural selection, which causes local adaptation and geographic isolation.展开更多
Precisely quantifying the strength of the proximal femur and accurately assessing hip fracture risk would enable those at high risk to be identified so that preventive interventions could be taken.Development of bette...Precisely quantifying the strength of the proximal femur and accurately assessing hip fracture risk would enable those at high risk to be identified so that preventive interventions could be taken.Development of better measures of femoral strength using the clinically展开更多
The relationship between human beings and nature influences the expressions and manifestations of literature. Literature can spy on the nature exploration of human society and ideological values in the thinking and be...The relationship between human beings and nature influences the expressions and manifestations of literature. Literature can spy on the nature exploration of human society and ideological values in the thinking and behavior patterns,expressing the relationship between human beings and nature. Through expressions of literature in China and the West,we draw lessons from W estern literary expressions in the developing relationship between man and nature,and get inspiration for the development of Chinese literature.展开更多
文摘Due to the complex high-temperature characteristics of hydrocarbon fuel,the research on the long-term working process of parallel channel structure under variable working conditions,especially under high heat-mass ratio,has not been systematically carried out.In this paper,the heat transfer and flow characteristics of related high temperature fuels are studied by using typical engine parallel channel structure.Through numeri⁃cal simulation and systematic experimental verification,the flow and heat transfer characteristics of parallel chan⁃nels under typical working conditions are obtained,and the effectiveness of high-precision calculation method is preliminarily established.It is known that the stable time required for hot start of regenerative cooling engine is about 50 s,and the flow resistance of parallel channel structure first increases and then decreases with the in⁃crease of equivalence ratio(The following equivalence ratio is expressed byΦ),and there is a flow resistance peak in the range ofΦ=0.5~0.8.This is mainly caused by the coupling effect of high temperature physical proper⁃ties,flow rate and pressure of fuel in parallel channels.At the same time,the cooling and heat transfer character⁃istics of parallel channels under some conditions of high heat-mass ratio are obtained,and the main factors affect⁃ing the heat transfer of parallel channels such as improving surface roughness and strengthening heat transfer are mastered.In the experiment,whenΦis less than 0.9,the phenomenon of local heat transfer enhancement and deterioration can be obviously observed,and the temperature rise of local structures exceeds 200℃,which is the risk of structural damage.Therefore,the reliability of long-term parallel channel structure under the condition of high heat-mass ratio should be fully considered in structural design.
基金the National Key R&D Program of China(2022YFA1505200)the National Natural Science Foundation of China(22472140,22021001)the Fundamental Research Funds for the Central Universities(20720210017 and 20720210009)。
文摘Large-area two-dimensional(2D)materials,such as graphene,MoS_(2),WS_(2),h-BN,black phosphorus,and MXenes,are a class of advanced materials with many possible applications.Different applications need different substrates,and each substrate may need a different way of transferring the 2D material onto it.Problems such as local stress concentrations,an uneven surface tension,inconsistent adhesion,mechanical damage and contamination during the transfer can adversely affect the quality and properties of the transferred material.Therefore,how to improve the integrity,flatness and cleanness of large area 2D materials is a challenge.In order to achieve high-quality transfer,the main concern is to control the interface adhesion between the substrate,the 2D material and the transfer medium.This review focuses on this topic,and finally,in order to promote the industrial use of large area 2D materials,provides a recipe for this transfer process based on the requirements of the application,and points out the current problems and directions for future development.
基金College Students Innovation and Entrepreneurship Project of Guangzhou Railway Polytechnic(2025CXCY015)。
文摘As the dominant seepage channel in rock masses,it is of great significance to study the influence of fracture roughness distribution on seepage and heat transfer in rock masses.In this paper,the fracture roughness distribution functions of the Bakhtiary dam site and Oskarshamn/Forsmark mountain were fitted using statistical methods.The COMSOL Multiphysics finite element software was utilized to analyze the effects of fracture roughness distribution types and empirical formulas for fracture hydraulic aperture on the seepage field and temperature field of rock masses.The results show that:(1)The fracture roughness at the Bakhtiary dam site and Oskarshamn/Forsmark mountain follows lognormal and normal distributions,respectively;(2)For rock masses with the same expected value and standard deviation of fracture roughness,the outflow from rock masses with lognormal distribution of fracture roughness is significantly larger than that of rock masses with normal distribution of fracture roughness;(3)The fracture hydraulic aperture,outflow,and cold front distance of the Li and Jiang model are significantly larger than those of the Barton model;(4)The outflow,hydraulic pressure distribution,and temperature distribution of the Barton model are more sensitive to the fracture roughness distribution type than those of the Li and Jiang model.
基金the National Natural Science Foundation of China(Grant Nos.62227901,12202068)the Civil Aerospace Pre-research Project(Grant No.D020304).
文摘The effects of projectile/target impedance matching and projectile shape on energy,momentum transfer and projectile melting during collisions are investigated by numerical simulation.By comparing the computation results with the experimental results,the correctness of the calculation and the statistical method of momentum transfer coefficient is verified.Different shapes of aluminum,copper and heavy tungsten alloy projectiles striking aluminum,basalt,and pumice target for impacts up to 10 km/s are simulated.The influence mechanism of the shape of the projectile and projectile/target density on the momentum transfer was obtained.With an increase in projectile density and length-diameter ratio,the energy transfer time between the projectile and targets is prolonged.The projectile decelerates slowly,resulting in a larger cratering depth.The energy consumed by the projectile in the excavation stage increased,resulting in lower mass-velocity of ejecta and momentum transfer coefficient.The numerical simulation results demonstrated that for different projectile/target combinations,the higher the wave impedance of the projectile,the higher the initial phase transition velocity and the smaller the mass of phase transition.The results can provide theoretical guidance for kinetic impactor design and material selection.
文摘Broadband near-infrared(NIR)luminescent materials have shown great promise in applications such as optical communication,biomedicine,and optoelectronic devices.However,the current research is focused on phos⁃phors and glasses,and it is important to develop broadband NIR luminescent nanomaterials.Here,we report an erbi⁃um-sensitized core-shell nanocrystal design for broadband NIR emission.Based on the structural design with suitable dopings of Tm^(3+)and Ho^(3+),the broadband NIR emission covering 1.5-2.1μm region is achieved under 980 nm and 808 nm excitations.Moreover,the emission intensity is further enhanced by introducing Yb^(3+)and Nd^(3+)into the sam⁃ple,respectively,and the energy transfer processes between them are systematically discussed.Our results present a novel approach for developing broadband NIR luminescent materials and devices.
基金Project(U2341254)supported by Ye Qisun Science Foundation of National Natural Science Foundation of ChinaProject(52475406)supported by the National Nature Science Foundation of ChinaProject(2024CY2-GJHX-32)supported by the Key R&D Program of Shaanxi Province,China。
文摘Effect of flip chip bonding parameters on microstructure at the interconnect interface and shear properties of 64.8Sn35.2Pb microbumps were investigated in this work.Results show that the main intermetallic compound(IMC)at the interconnect interface is(Ni,Cu)_(3)Sn_(4)phase,and meanwhile a small amount of(Cu,Ni)_(6)Sn_(5)phase with a size of 50−100 nm is formed around(Ni,Cu)_(3)Sn_(4)phase.The orientation relationship of[-1-56](Ni,Cu)_(3)Sn_(4)//[152](Cu,Ni)_(6)Sn_(5)and(601)(Ni,Cu)_(3)Sn_(4)//(-201)(Cu,Ni)_(6)Sn_(5)is found between these two phases,and the atomic matching at the interface of the two phases is low.The highest shear force of 77.3 gf is achieved in the 64.8Sn35.2Pb microbump at the peak temperature of 250℃and parameter V1 because dense IMCs and no cracks form at the interconnect interface.Two typical fracture modes of microbumps are determined as solder fracture and mixed fracture.The high thermal stress presenting in the thick IMCs layer induces crack initiation,and cracks propagate along theα/βphase boundaries in the Sn-Pb solder under shear force,leading to a mixed fracture mode in the microbumps.
文摘The ammunition loading system manipulator is susceptible to gear failure due to high-frequency,heavyload reciprocating motions and the absence of protective gear components.After a fault occurs,the distribution of fault characteristics under different loads is markedly inconsistent,and data is hard to label,which makes it difficult for the traditional diagnosis method based on single-condition training to generalize to different conditions.To address these issues,the paper proposes a novel transfer discriminant neural network(TDNN)for gear fault diagnosis.Specifically,an optimized joint distribution adaptive mechanism(OJDA)is designed to solve the distribution alignment problem between two domains.To improve the classification effect within the domain and the feature recognition capability for a few labeled data,metric learning is introduced to distinguish features from different fault categories.In addition,TDNN adopts a new pseudo-label training strategy to achieve label replacement by comparing the maximum probability of the pseudo-label with the test result.The proposed TDNN is verified in the experimental data set of the artillery manipulator device,and the diagnosis can achieve 99.5%,significantly outperforming other traditional adaptation methods.
基金supported by National Natural Science Foundation of China(Grant No.92266201).
文摘As the performance of the box-type multiple launch rocket system(BMLRS)improves,its mechanical structures,particularly the plane clearance design between the slider on the rocket and the guide inside the launch canister,have grown increasingly complex.However,deficiencies still exist in the current launch modeling theory for BMLRS.In this study,a multi-rigid-flexible-body launch dynamics model coupling the launch platform and rocket was established using the multibody system transfer matrix method and the Newton-Euler formulation.Furthermore,considering the bending of the launch canister,a detection algorithm for slider-guide plane clearance contact was proposed.To quantify the contact force and friction effect between the slider and guide,the contact force model and modified Coulomb model were introduced.Both the modal and launch tests were conducted.Additionally,the modal convergence was verified.By comparing the modal experiments and simulation results,the maximum relative error of the eigenfrequency is 3.29%.thereby verifying the accuracy of the developed BMLRS dynamics model.Furthermore,the launch test validated the proposed plane clearance contact model.Moreover,the study investigated the influence of various model parameters on the dynamic characteristics of BMLRS,including launch canister bending stiffness,slider and guide material,slider-guide clearance,slider length and layout.This analysis of influencing factors provides a foundation for future optimization in BMLRS design.
基金supported by the National Natural Science Foundation of China(No.21904143).
文摘Single-entity collisional electrochemistry(SECE)is a branch of single-entity electrochemistry.It can directly characterize entities/particles with single particle resolution through random collisions between particles and electrodes in a solution,and obtain rich physicochemical information,thus becoming one of the frontiers of electroanalytical chemistry in the past two decades.Interestingly,the(micro/nanoscale)sensing electrodes have evolved from a polarizable liquid/liquid(mercury/liquid)interface to a solid/liquid interface and then to a liquid/liquid interface(i.e.,an interface between twoimmiscible electrolyte solutions,ITIES),as if they have completed a cycle(but in fact they have not).ITIES has become the latest sensing electrode in the booming SECE due to its polarizability(up to 1.1 V at the water/a,a,a-trifluorotoluene interface)and high reproducibility.The four measurement modes(direct electrolysis,mediated electrolysis,current blockade,and charge displacement)developed in the realm of SECE at solid/liquid interfaces have also been fully realized at the miniature ITIES.This article will discuss these four modes at the ITIES from the perspectives of basic concepts,operating mechanisms,and latest developments(e.g.,discovery of ionosomes,blockade effect of Faradaic ion transfer,etc.),and look forward to the future development and direction of this emerging field.
文摘Two-dimensional(2D)transition metal dichalcogenides(TMDs)and their heterostructures(HSs)exhibit unique optical properties and show great promise for developing next-generation optoelectronics.However,the photo-luminescence(PL)quantum yield of monolayer(1L)TMDs is still quite low at room temperature,which severely lim-its their practical applications.Here we report a PL enhancement effect of 1L WS_(2) at room temperature when con-structing it into 1L-WS_(2)/hBN/1L-MoS_(2) vertical HSs.The PL enhancement factors(EFs)can be up to 4.2.By using transient absorption(TA)spectroscopy,we demonstrate that the PL enhancement effect is due to energy transfer from 1L MoS_(2) to 1L WS_(2).The energy transfer process occurs on a picosecond timescale and lasts more than one hundred picoseconds which indicates a prominent contribution from exciton-exciton annihilation.Furthermore,the PL en-hancement effect of 1L WS_(2) can be observed in 2L-MoS_(2)/hBN/1L-WS_(2) and 3L-MoS_(2)/hBN/1L-WS_(2) HSs.Our study provides a comprehensive understanding of the energy transfer process in the PL enhancement of 2D TMDs and a fea-sible way to optimize the performance of TMD-based optoelectronic devices.
基金Project(2301DH09002)supported by the Bureau of Planning and Natural Resources,Chongqing,ChinaProject(2022T3051)supported by the Science and Technology Service Network Initiative,ChinaProject(2018-ZL-01)supported by the Sichuan Transportation Science and Technology,China。
文摘Machine-learning methodologies have increasingly been embraced in landslide susceptibility assessment.However,the considerable time and financial burdens of landslide inventories often result in persistent data scarcity,which frequently impedes the generation of accurate and informative landslide susceptibility maps.Addressing this challenge,this study compiled a nationwide dataset and developed a transfer learning-based model to evaluate landslide susceptibility in the Chongqing region specifically.Notably,the proposed model,calibrated with the warmup-cosine annealing(WCA)learning rate strategy,demonstrated remarkable predictive capabilities,particularly in scenarios marked by data limitations and when training data were normalized using parameters from the source region.This is evidenced by the area under the receiver operating characteristic curve(AUC)values,which exhibited significant improvements of 51.00%,24.40%and 2.15%,respectively,compared to a deep learning model,in contexts where only 1%,5%and 10%of data from the target region were used for retraining.Simultaneously,there were reductions in loss of 16.12%,27.61%and 15.44%,respectively,in these instances.
文摘In this study, the laminar heat transfer and nanofluid flow between two porous horizontal concentric cylinders was investigated. The problem is investigated in two different geometries and the Re=10, 25, 50, 75, 100 and volume fraction 0, 0.2%, 0.5%, 2% and 5% that related to copper nanoparticles, and porous medium porosity of 0.5 and 0.9. Compared to the first geometry, the convective coefficient in the second geometry increases by 8.3%, 7% and 5.5% at Reynolds numbers of 100, 75 and 50, respectively. Comparison of the outlet temperatures for two heat fluxes of 300 and 1200 W/m^2 indicates a 2.5% temperature growth by a fourfold increase in the heat fluxes. Also, the higher Nusselt number is associated with the second geometry occurring at porosities of 0.9 and 0.5, respectively. In both geometries, the Nusselt number values at the porosity of 0.9 are higher, which is due to the increased nanofluid convection at higher porosities. The velocity of the nanofluid experiences a two-fold increase at the outlet compared to its inlet velocity in the first geometry and for both porosities. Similarly, a three-fold increase was achieved in the second geometry and for both porosities.
文摘The relation between human and crop resources belongs to the ethic of resources exploitation. The purposes of discussing the ethic of crop resources are to protect the ecology and safety of crops, to gain sustainable development, furthermore, to choose and form the production structure that is favorable to saving crop resources and protecting the ecology of crops. Plant genetic engineering is the technology of molecule breeding of rearrangement of inheritance materials at the level of molecule directionally, of improving plant properties and of breeding high quality and yield varieties of crops. The prominent effects of the technology on the crop ecological system are human subjective factors increasing as well as violating the nature and intensifying the conflict between human being and nature. Therefore, in plant genetic engineering, crop resources exploitation should follow certain ethic principles. Under the theory of ethics of natural resources, by the means of biologinal-statistics, the author systematically analyzed the possible model of crop resources transfer between generations as well as the transfer mode of magnitude of real materials and magnitude of value.
基金Project(41272122)supported by the National Natural Science Foundation of China
文摘The oblique transfer zone in the Fushan Sag, a syndepositional dome sandwiched between the Bailian and Huangtong sub-sags, has been the most important exploration target. The major oil observation occurs in the E_2l_1^(L+M) and the E_2l_3~U. 46 oil and rock samples reveal that the oil in the transfer zone is mostly contributed by the Bailian sub-sag, though the source rock conditions, hydrocarbon generation and expulsion histories of the Bailian and Huangtong sub-sags are similar. The E_2l_3~U oil, characterized by high maturity, Pr/Ph ratio and oleanane/C_(30)-hopane ratio, shows a close genetic affinity with the E_2l_3~b source rocks, while the E_2l_1^(L+M) oil, characterized by lower maturity, Pr/Ph ratio and oleanane/C_(30)-hopane ratio, is suggested to be derived from the E_2l_(1+2)~b source rocks. The homogenization temperatures of aqueous fluid inclusions, taking the burial history of the reservoirs into account, reflect that the oil charge mainly occurred from mid-Miocene to Pliocene in the oblique transfer zone. The oil transporting passages include connected sand bodies, unconformities and faults in the Fushan Sag. Of these, the faults are the most complicated and significant. The faults differ sharply in the west area, the east area and the oblique transfer zone, resulting in different influence on the oil migration and accumulation. During the main hydrocarbon charge stage, the faults in the west area are characterized by bad vertical sealing and spatially dense distribution. As a result, the oil generated by the Huangtong source rocks is mostly lost along the faults during the vertical migration in the west area. This can be the mechanism proposed to explain the little contribution of the Huangtong source rocks to the oil in the oblique transfer zone. Eventually, an oil migration and accumulation model is built in the oblique transfer zone, which may provide theoretical and practical guides for the oil exploration.
文摘The supported isolated Pt atoms(Pt iso)and other rare metals have attracted intensive concern due to their maximized metal utilization efficiency,unique reactivity or selectivity,connection to organometallic catalysis and the potential for making well-defined active sites[1-3].As catalytic active sites,oxide-supported isolated Pt-group metal atoms are well known for their unique reactivity and efficient metal utilization[4-6].Even continuous efforts have been made,it is still challenging to characterize the intrinsic ca-talytic activity of these dispersed active sites on oxide supports at a level that relates local electronic and geometric structure to function,because of their atomic dispersion,heterogeneity in the local coordination,dynamic changes in local coordination under reactive environments and low loading of metal[7-9].
文摘The appearance and hair color between these two subspecies Rattus rattus Sladeni and R.r. Hainanicus are similar to each other. Their most major distinctive characteristic is the length ratio of tail to body. However, this characteristic was unstable in some measuring records. In Guangdong, R.r. Hainanicus is restrictedly distributed in the west region, and R.r. Sladeni is widely distributed in the other regions of this province. In this study, we detected the sequences of mitochondrial 12S rRNA gene fragments of 9 samples from R.r. Hainanicus and R.r. Sladeni (Longmen and Hong Kong populations). These 385 nucleotide positions of 12S rRNA gene fragment include 26 variable sites and 14 parsimony-informative sites. 3 insertion/deletion sites are observed. The phylogenetic relationships among these samples were constructed by Neighbor-joining and Maximum parsimony methods. The analysis shows that R.r. Hainanicus is more closely relative to the Longmen population of R.r. Sladeni than to the Hong Kong population of R.r. Sladeni. The sequencing analysis of 12S rRNA gene fragments is not agreement on the classification of subspecies R. r. Hainanicus inferred from the morphology and geographical distribution. The morphological variation of R.r. Hainanicus should result from the natural selection, which causes local adaptation and geographic isolation.
基金supported by The HongKong Polytechnic University Research Grants(No.1-BB81)grants from National Natural Science Foundation of China,Nos.10872078 and 10832012
文摘Precisely quantifying the strength of the proximal femur and accurately assessing hip fracture risk would enable those at high risk to be identified so that preventive interventions could be taken.Development of better measures of femoral strength using the clinically
文摘The relationship between human beings and nature influences the expressions and manifestations of literature. Literature can spy on the nature exploration of human society and ideological values in the thinking and behavior patterns,expressing the relationship between human beings and nature. Through expressions of literature in China and the West,we draw lessons from W estern literary expressions in the developing relationship between man and nature,and get inspiration for the development of Chinese literature.
