Beach titanomagnetite(TTM)provides a cheap alternative source of Fe and Ti,but this ore is difficult to process to make suitable concentrates for the blast furnace.Recently studies showed that it is feasible to separa...Beach titanomagnetite(TTM)provides a cheap alternative source of Fe and Ti,but this ore is difficult to process to make suitable concentrates for the blast furnace.Recently studies showed that it is feasible to separate Fe and Ti by coal-based direct reduction.In this study,beach TTM was selected as the research object,the effects of reducing agents on reducing atmosphere in coal-based direct reduction of beach TTM were analyzed,and the role of volatiles was also studied.The results showed that when bitumite and coke were used as reducing agents of TTM,the CO produced from volatiles was involved in the reduction reaction,and the generated CO_(2) provided the raw material for the reaction of TTM.The reduction effect of bitumite was better than that of coke.The reason is that bitumite+TTM had a higher gas generation rate and produced a higher CO partial pressure,while coke+TTM had a lower gas generation rate and produced a lower CO partial pressure.When graphite was used as a reducing agent,there was a solid-solid reaction in the early stage in the reaction.With the continuous accumulation of CO_(2),the Boudouad reaction started and accelerated.Graphite+TTM also produced a higher CO partial pressure.展开更多
The features of the techniques of fast reducing roasting （FRR） and conventional magnetic roasting, as well as tremendous demands of iron ores in iron and steel industry of China, were briefly described. The test equ...The features of the techniques of fast reducing roasting （FRR） and conventional magnetic roasting, as well as tremendous demands of iron ores in iron and steel industry of China, were briefly described. The test equipment suitable for FRR of fine-grained materials was introduced. Weakly magnetic materials with grain size of 〈0.30 mm were converted into strongly magnetic materials by FRR for several to dozens of seconds. In a weakly reducing atmosphere and at 740-800 ~C, refractory powder iron material （〈0.30 mm） which is rich in specularite, limonite and Mg-Mn siderite was subjected to FRR for a few seconds to 60 s. Concentrate with iron grade of 55.67%-55.21%, high contents of Mg and Mn in the ore is obtained and the yield of magnetic separation reaches 81.66%-86.57%. The results of X-ray diffraction （XRD） analysis and magnetism detection of the material before and after FRR indicate that weakly magnetic material is mainly converted into strongly magnetic material Fe304 with specific saturation magnetic moment. The efficiency of FRR is consistent with TFe recovery of magnetic separation; meantime, the specific sa^u＇ation magnetic moment increases from 33 to 42 times after FRR. Calculations show that speeds of flash magnetic roasting are obtained from several dozen to two or three hundred times, compared with rotary kiln or shaft furnace. This indicates that it is practicable to use the fast reducing roasting technique to improve the comprehensive utilization of iron ore resources.展开更多
The structure and working principle of a self-deigned high pressure electronic pneumatic pressure reducing valve (EPPRV) with slide pilot are introduced.The resistance value formulas and the relationship between the r...The structure and working principle of a self-deigned high pressure electronic pneumatic pressure reducing valve (EPPRV) with slide pilot are introduced.The resistance value formulas and the relationship between the resistance and pressure of three typical pneumatic resistances are obtained.Then,the method of static characteristics analysis only considering pneumatic resistances is proposed,the resistance network from gas supply to load is built up,and the mathematical model is derived from the flow rate formulas and flow conservation equations,with the compressibility of high pressure gas and temperature drop during the expansion considered in the model.Finally,the pilot spool displacement of 1.5 mm at an output pressure of 15MPa and the enlarging operating stroke of the pilot spool are taken as optimization targets,and the optimization is carried out based on genetic algorithm and the model mentioned above.The results show that the static characteristics of the EPPRV are significantly improved.The idea of static characteristics analysis and optimization based on pneumatic resistance network is valuable for the design of pneumatic components or system.展开更多
In order to reduce the materials cost of COREX ironmaking process,sinter has been introduced into the composite burden in China.This work explored the reducing process of sinter in COREX shaft furnace to clarify its r...In order to reduce the materials cost of COREX ironmaking process,sinter has been introduced into the composite burden in China.This work explored the reducing process of sinter in COREX shaft furnace to clarify its reduction properties change and then the effect of sinter proportion on metallurgical performance of composite burden was investigated.The results show that the reducing process of sinter in COREX shaft furnace was basically same with that in blast furnace but sinter seems like breaking faster.Under reducing condition simulated COREX shaft furnace,sinter possessed the worst reduction degradation index(RDI)and undifferentiated reduction index(RI)compared with pellet and iron ore lumps.Macroscopic and microscopic mineralogy changes indicated that sinter presents integral cracking while pellet and lump ore present surface cracking,and no simple congruent relationship exists between cracks of the burden and its ultimate reduction degradation performance.The existence of partial metallurgical performance superposition between composite and single ferrous burden was confirmed.RDI_(+6.3)≥70%and RDI_(+3.15)≥80%were speculated as essential requirements for the composite burden containing sinter in COREX shaft furnace.展开更多
The study was to investigate the effect of reducing central sympathetic nervous tone with clonidine on cardiomyocyte contraction,and further to analyze the influence of reducing the central sympathetic nervous tone on...The study was to investigate the effect of reducing central sympathetic nervous tone with clonidine on cardiomyocyte contraction,and further to analyze the influence of reducing the central sympathetic nervous tone on response of β1 and β2-AR in aged ventricular myocytes.Sprague-Dawley rats were randomly divided into three groups:adult group,aged group and aged group with clonidine.展开更多
With the development of large scale text processing, the dimension of text feature space has become larger and larger, which has added a lot of difficulties to natural language processing. How to reduce the dimension...With the development of large scale text processing, the dimension of text feature space has become larger and larger, which has added a lot of difficulties to natural language processing. How to reduce the dimension has become a practical problem in the field. Here we present two clustering methods, i.e. concept association and concept abstract, to achieve the goal. The first refers to the keyword clustering based on the co occurrence of展开更多
In order to meet the demands of new-generation electric vehicles that require high power output(over 15 kW/kg),it is crucial to increase the energy density of car-bon-based supercapacitors to a level comparable to tha...In order to meet the demands of new-generation electric vehicles that require high power output(over 15 kW/kg),it is crucial to increase the energy density of car-bon-based supercapacitors to a level comparable to that of batteries,while maintaining a high power density.We re-port a porous carbon material produced by immersing pop-lar wood(PW)sawdust in a solution of KOH and graphene oxide(GO),followed by carbonization.The resulting mater-ial has exceptional properties as an electrode for high-en-ergy supercapacitors.Compared to the material prepared by the direct carbonization of PW,its electrical conductivity was in-creased from 0.36 to 26.3 S/cm.Because of this and a high microporosity of over 80%,which provides fast electron channels and a large ion storage surface,when used as the electrodes for a symmetric supercapacitor,it gave a high energy density of 27.9 Wh/kg@0.95 kW/kg in an aqueous electrolyte of 1.0 mol/L Na_(2)SO_(4).The device also had battery-level energy storage with maximum energy densities of 73.9 Wh/kg@2.0 kW/kg and 67.6 Wh/kg@40 kW/kg,an ultrahigh power density,in an organic electrolyte of 1.0 mol/L TEABF4/AN.These values are comparable to those of 30−45 Wh/kg for Pb-acid batteries and 30−55 Wh/kg for aqueous lithium batteries.This work indicates a way to prepare carbon materials that can be used in supercapacit-ors with ultrahigh energy and power densities.展开更多
In this paper,an integrated guidance and control method based on an adaptive path-following controller is proposed to control a spin-stabilized projectile with only translational motion information under the constrain...In this paper,an integrated guidance and control method based on an adaptive path-following controller is proposed to control a spin-stabilized projectile with only translational motion information under the constraint of an actuator,uncertainties in aerodynamic parameters and measurements,and control system complexity.Owing to the fairly high rotation speed,the dynamic model of this missile is strongly nonlinear,uncertain and coupled in pitch,yaw and roll channels.A theoretical equivalent resultant force and uncertainty compensation method are comprehensively used to realize decoupling of pitch and yaw.In response to the strong nonlinear and time-varying characteristics of the dynamic system,the quasi-linear model whose parameters are obtained by interpolation of points selected as the segmentation points in the trajectory envelope,is used for calculation in each step.To cope with the system uncertainty caused by model approximation,parameter uncertainty and ballistic interference,an extended state estimator is used to compensate the output feedback according to the test ballistic angle.In order to improve the tracking efficiency and ensure the tracking error convergence with only translational motion information,the virtual guide point,whose derivative is deduced according to the Lyapunov principle,is calculated in real time according to the projection relationship between the real-time position and the reference trajectory,and a virtual line-of-sight angle and the backstepping method are used for the design of the guidance and control system.In order to avoid the influence of control input saturation on the guidance and control performance due to the actuator limitation and improve the robustness of the system,an anti-saturation compensator is designed according to the two-step method.The feasibility and effectiveness of the path-following controller is verified through closed-loop flight simulations with measurement,control,and condition uncertainties.The results indicate that the designed controller can converge to the reference path and evidently decrease the distance between the impact point and target under different uncertainties.展开更多
The observation error model of the underwater acous-tic positioning system is an important factor to influence the positioning accuracy of the underwater target.For the position inconsistency error caused by consideri...The observation error model of the underwater acous-tic positioning system is an important factor to influence the positioning accuracy of the underwater target.For the position inconsistency error caused by considering the underwater tar-get as a mass point,as well as the observation system error,the traditional error model best estimation trajectory(EMBET)with little observed data and too many parameters can lead to the ill-condition of the parameter model.In this paper,a multi-station fusion system error model based on the optimal polynomial con-straint is constructed,and the corresponding observation sys-tem error identification based on improved spectral clustering is designed.Firstly,the reduced parameter unified modeling for the underwater target position parameters and the system error is achieved through the polynomial optimization.Then a multi-sta-tion non-oriented graph network is established,which can address the problem of the inaccurate identification for the sys-tem errors.Moreover,the similarity matrix of the spectral cluster-ing is improved,and the iterative identification for the system errors based on the improved spectral clustering is proposed.Finally,the comprehensive measured data of long baseline lake test and sea test show that the proposed method can accu-rately identify the system errors,and moreover can improve the positioning accuracy for the underwater target positioning.展开更多
Poly α-olefin,used as the drag reducing agent on the crude oil transportation,was analyzed by pyrolysis/gas chromatography-mass spectrometry(PY/GC-MS).Three polyolefin samples of polydecene,polyoctene and the copolym...Poly α-olefin,used as the drag reducing agent on the crude oil transportation,was analyzed by pyrolysis/gas chromatography-mass spectrometry(PY/GC-MS).Three polyolefin samples of polydecene,polyoctene and the copolymer of decene and octane,were analyzed.The samples were analyzed by increasing pyrolysis temperatures from 500 to 800 ℃.The result showed that the optimal pyrolysis temperature was 600 ℃.2-Methyl-decene and 2-methyl-pentadecene was selected as the characteristic pyrolysates for identification polydecene and polyoctene,respectively.The quantitative method of the copolymer was also discussed.Height peak of the characteristic pyrolysate was used to calculate the mass rate of the two monomers in the copolymers.The error of the method was-4.08%.展开更多
A method was established for qualitative and quantitative determination of the reducing substances from plastic blood bags aqueous extract.The samples were extracted with a solid-phase extraction procedure,dichloromet...A method was established for qualitative and quantitative determination of the reducing substances from plastic blood bags aqueous extract.The samples were extracted with a solid-phase extraction procedure,dichloromethane qua extract solvents,and were measured with GC-MS.With this method,we determined several reducing substances from plastic blood bags aqueous extract and fixed quantify on DEHP (di (2-ethylhexyl) phthalate),one of the dominating reducing substances.The method was simple and can be used for the quality control of plastic blood bags.展开更多
基金Project(52104257)supported by the National Natural Science Foundation of China。
文摘Beach titanomagnetite(TTM)provides a cheap alternative source of Fe and Ti,but this ore is difficult to process to make suitable concentrates for the blast furnace.Recently studies showed that it is feasible to separate Fe and Ti by coal-based direct reduction.In this study,beach TTM was selected as the research object,the effects of reducing agents on reducing atmosphere in coal-based direct reduction of beach TTM were analyzed,and the role of volatiles was also studied.The results showed that when bitumite and coke were used as reducing agents of TTM,the CO produced from volatiles was involved in the reduction reaction,and the generated CO_(2) provided the raw material for the reaction of TTM.The reduction effect of bitumite was better than that of coke.The reason is that bitumite+TTM had a higher gas generation rate and produced a higher CO partial pressure,while coke+TTM had a lower gas generation rate and produced a lower CO partial pressure.When graphite was used as a reducing agent,there was a solid-solid reaction in the early stage in the reaction.With the continuous accumulation of CO_(2),the Boudouad reaction started and accelerated.Graphite+TTM also produced a higher CO partial pressure.
基金Project(20070497048) supported by China Scholarship Council,Ministry of Education of China
文摘The features of the techniques of fast reducing roasting （FRR） and conventional magnetic roasting, as well as tremendous demands of iron ores in iron and steel industry of China, were briefly described. The test equipment suitable for FRR of fine-grained materials was introduced. Weakly magnetic materials with grain size of 〈0.30 mm were converted into strongly magnetic materials by FRR for several to dozens of seconds. In a weakly reducing atmosphere and at 740-800 ~C, refractory powder iron material （〈0.30 mm） which is rich in specularite, limonite and Mg-Mn siderite was subjected to FRR for a few seconds to 60 s. Concentrate with iron grade of 55.67%-55.21%, high contents of Mg and Mn in the ore is obtained and the yield of magnetic separation reaches 81.66%-86.57%. The results of X-ray diffraction （XRD） analysis and magnetism detection of the material before and after FRR indicate that weakly magnetic material is mainly converted into strongly magnetic material Fe304 with specific saturation magnetic moment. The efficiency of FRR is consistent with TFe recovery of magnetic separation; meantime, the specific sa^u＇ation magnetic moment increases from 33 to 42 times after FRR. Calculations show that speeds of flash magnetic roasting are obtained from several dozen to two or three hundred times, compared with rotary kiln or shaft furnace. This indicates that it is practicable to use the fast reducing roasting technique to improve the comprehensive utilization of iron ore resources.
基金Project(50575202) supported by the National Natural Science Foundation of China
文摘The structure and working principle of a self-deigned high pressure electronic pneumatic pressure reducing valve (EPPRV) with slide pilot are introduced.The resistance value formulas and the relationship between the resistance and pressure of three typical pneumatic resistances are obtained.Then,the method of static characteristics analysis only considering pneumatic resistances is proposed,the resistance network from gas supply to load is built up,and the mathematical model is derived from the flow rate formulas and flow conservation equations,with the compressibility of high pressure gas and temperature drop during the expansion considered in the model.Finally,the pilot spool displacement of 1.5 mm at an output pressure of 15MPa and the enlarging operating stroke of the pilot spool are taken as optimization targets,and the optimization is carried out based on genetic algorithm and the model mentioned above.The results show that the static characteristics of the EPPRV are significantly improved.The idea of static characteristics analysis and optimization based on pneumatic resistance network is valuable for the design of pneumatic components or system.
基金Project(2019JJ51007)supported by the Natural Science Foundation of Hunan Province,China。
文摘In order to reduce the materials cost of COREX ironmaking process,sinter has been introduced into the composite burden in China.This work explored the reducing process of sinter in COREX shaft furnace to clarify its reduction properties change and then the effect of sinter proportion on metallurgical performance of composite burden was investigated.The results show that the reducing process of sinter in COREX shaft furnace was basically same with that in blast furnace but sinter seems like breaking faster.Under reducing condition simulated COREX shaft furnace,sinter possessed the worst reduction degradation index(RDI)and undifferentiated reduction index(RI)compared with pellet and iron ore lumps.Macroscopic and microscopic mineralogy changes indicated that sinter presents integral cracking while pellet and lump ore present surface cracking,and no simple congruent relationship exists between cracks of the burden and its ultimate reduction degradation performance.The existence of partial metallurgical performance superposition between composite and single ferrous burden was confirmed.RDI_(+6.3)≥70%and RDI_(+3.15)≥80%were speculated as essential requirements for the composite burden containing sinter in COREX shaft furnace.
文摘The study was to investigate the effect of reducing central sympathetic nervous tone with clonidine on cardiomyocyte contraction,and further to analyze the influence of reducing the central sympathetic nervous tone on response of β1 and β2-AR in aged ventricular myocytes.Sprague-Dawley rats were randomly divided into three groups:adult group,aged group and aged group with clonidine.
文摘With the development of large scale text processing, the dimension of text feature space has become larger and larger, which has added a lot of difficulties to natural language processing. How to reduce the dimension has become a practical problem in the field. Here we present two clustering methods, i.e. concept association and concept abstract, to achieve the goal. The first refers to the keyword clustering based on the co occurrence of
文摘In order to meet the demands of new-generation electric vehicles that require high power output(over 15 kW/kg),it is crucial to increase the energy density of car-bon-based supercapacitors to a level comparable to that of batteries,while maintaining a high power density.We re-port a porous carbon material produced by immersing pop-lar wood(PW)sawdust in a solution of KOH and graphene oxide(GO),followed by carbonization.The resulting mater-ial has exceptional properties as an electrode for high-en-ergy supercapacitors.Compared to the material prepared by the direct carbonization of PW,its electrical conductivity was in-creased from 0.36 to 26.3 S/cm.Because of this and a high microporosity of over 80%,which provides fast electron channels and a large ion storage surface,when used as the electrodes for a symmetric supercapacitor,it gave a high energy density of 27.9 Wh/kg@0.95 kW/kg in an aqueous electrolyte of 1.0 mol/L Na_(2)SO_(4).The device also had battery-level energy storage with maximum energy densities of 73.9 Wh/kg@2.0 kW/kg and 67.6 Wh/kg@40 kW/kg,an ultrahigh power density,in an organic electrolyte of 1.0 mol/L TEABF4/AN.These values are comparable to those of 30−45 Wh/kg for Pb-acid batteries and 30−55 Wh/kg for aqueous lithium batteries.This work indicates a way to prepare carbon materials that can be used in supercapacit-ors with ultrahigh energy and power densities.
文摘In this paper,an integrated guidance and control method based on an adaptive path-following controller is proposed to control a spin-stabilized projectile with only translational motion information under the constraint of an actuator,uncertainties in aerodynamic parameters and measurements,and control system complexity.Owing to the fairly high rotation speed,the dynamic model of this missile is strongly nonlinear,uncertain and coupled in pitch,yaw and roll channels.A theoretical equivalent resultant force and uncertainty compensation method are comprehensively used to realize decoupling of pitch and yaw.In response to the strong nonlinear and time-varying characteristics of the dynamic system,the quasi-linear model whose parameters are obtained by interpolation of points selected as the segmentation points in the trajectory envelope,is used for calculation in each step.To cope with the system uncertainty caused by model approximation,parameter uncertainty and ballistic interference,an extended state estimator is used to compensate the output feedback according to the test ballistic angle.In order to improve the tracking efficiency and ensure the tracking error convergence with only translational motion information,the virtual guide point,whose derivative is deduced according to the Lyapunov principle,is calculated in real time according to the projection relationship between the real-time position and the reference trajectory,and a virtual line-of-sight angle and the backstepping method are used for the design of the guidance and control system.In order to avoid the influence of control input saturation on the guidance and control performance due to the actuator limitation and improve the robustness of the system,an anti-saturation compensator is designed according to the two-step method.The feasibility and effectiveness of the path-following controller is verified through closed-loop flight simulations with measurement,control,and condition uncertainties.The results indicate that the designed controller can converge to the reference path and evidently decrease the distance between the impact point and target under different uncertainties.
基金This work was supported by the National Natural Science Foundation of China(61903086,61903366,62001115)the Natural Science Foundation of Hunan Province(2019JJ50745,2020JJ4280,2021JJ40133)the Fundamentals and Basic of Applications Research Foundation of Guangdong Province(2019A1515110136).
文摘The observation error model of the underwater acous-tic positioning system is an important factor to influence the positioning accuracy of the underwater target.For the position inconsistency error caused by considering the underwater tar-get as a mass point,as well as the observation system error,the traditional error model best estimation trajectory(EMBET)with little observed data and too many parameters can lead to the ill-condition of the parameter model.In this paper,a multi-station fusion system error model based on the optimal polynomial con-straint is constructed,and the corresponding observation sys-tem error identification based on improved spectral clustering is designed.Firstly,the reduced parameter unified modeling for the underwater target position parameters and the system error is achieved through the polynomial optimization.Then a multi-sta-tion non-oriented graph network is established,which can address the problem of the inaccurate identification for the sys-tem errors.Moreover,the similarity matrix of the spectral cluster-ing is improved,and the iterative identification for the system errors based on the improved spectral clustering is proposed.Finally,the comprehensive measured data of long baseline lake test and sea test show that the proposed method can accu-rately identify the system errors,and moreover can improve the positioning accuracy for the underwater target positioning.
文摘Poly α-olefin,used as the drag reducing agent on the crude oil transportation,was analyzed by pyrolysis/gas chromatography-mass spectrometry(PY/GC-MS).Three polyolefin samples of polydecene,polyoctene and the copolymer of decene and octane,were analyzed.The samples were analyzed by increasing pyrolysis temperatures from 500 to 800 ℃.The result showed that the optimal pyrolysis temperature was 600 ℃.2-Methyl-decene and 2-methyl-pentadecene was selected as the characteristic pyrolysates for identification polydecene and polyoctene,respectively.The quantitative method of the copolymer was also discussed.Height peak of the characteristic pyrolysate was used to calculate the mass rate of the two monomers in the copolymers.The error of the method was-4.08%.
文摘A method was established for qualitative and quantitative determination of the reducing substances from plastic blood bags aqueous extract.The samples were extracted with a solid-phase extraction procedure,dichloromethane qua extract solvents,and were measured with GC-MS.With this method,we determined several reducing substances from plastic blood bags aqueous extract and fixed quantify on DEHP (di (2-ethylhexyl) phthalate),one of the dominating reducing substances.The method was simple and can be used for the quality control of plastic blood bags.
