Mercury removal from coal combustion flue gas remains a significant challenge for environmental protection due to the lack of cost-effective sorbents.In this study,a series of red mud(RM)-based sorbents impregnated wi...Mercury removal from coal combustion flue gas remains a significant challenge for environmental protection due to the lack of cost-effective sorbents.In this study,a series of red mud(RM)-based sorbents impregnated with sodium halides(NaBr and NaI)are presented to capture elemental mercury(Hg^(0))from flue gas.The modified RM underwent comprehensive characterization,including analysis of its textural qualities,crystal structure,chemical composition,and thermal properties.The results indicate that the halide impregnation substantially impacts the surface area and pore size of the RM.Hg^(0) removal performance was evaluated on a fixed-bed reactor in simulated flue gas(consisting of N_(2),O_(2),CO_(2),NO and SO_(2),etc.)on a modified RM.At an optimal adsorption temperature of 160℃,NaI-modified sorbent(RMI5)offers a removal efficiency of 98%in a mixture of gas,including O_(2),NO and HCl.Furthermore,pseudo-second-order model fitting results demonstrate the chemisorption mechanism for the adsorption of Hg^(0) in kinetic investigations.展开更多
D2EHPA(P204),tri-butyl-phosphate(TBP)and sodium chloride(NaCl)were attractive for selective extraction of scandium from acid leaching solution of red mud.The extraction parameters of P204 concentration(X_(P204)),NaCl ...D2EHPA(P204),tri-butyl-phosphate(TBP)and sodium chloride(NaCl)were attractive for selective extraction of scandium from acid leaching solution of red mud.The extraction parameters of P204 concentration(X_(P204)),NaCl concentration(C_(NaCl)),pH value,reaction time,stirring speed and O/A were investigated to extract scandium and separate iron from the acid leaching solution.The extraction mechanism was analyzed by Fourier transform infrared spectroscopy(FT-IR)and thermodynamic theory.The single-stage extraction efficiency of scandium,iron andβ(Sc/Fe)were 99.1%,9.4%and 1061.2,respectively,with C_(NaCl) of 75 g/L and XP204 of 0.75 at solution pH value of 1.2 and stirring speed of 200 r/min for 6 min,in which a good separation effect of scandium and iron was obtained.The vibration absorption peak Sc─O was contributed to the extraction of scandium with P204.The complex[FeCln]^(3−n) existed in the solution with adding NaCl into the acid leaching solution.The value of n was higher and the valence state of the complex[FeCln]^(3−n) was lower with an increase of chloride concentration,which restricts the extraction efficiency of iron with P204.The extraction of three stages in the counter-current simulation experiments was carried out according to the McCabe-Thiele diagram.Gibbs free energy change(ΔG)of−5.93 kJ/mol,enthalpy change(ΔH)of 23.45 kJ/mol and entropy change(ΔH)of 98.54 J/(mol·K)were obtained in the solvent extraction proces,which indicate that the extraction reaction is easily spontaneous and endothermic and a proper increase of temperature is conducive to the extraction of scandium.展开更多
New ultra-lightweight sludge-red mud ceramics(ULS-RMC) were prepared by red mud(RM),clay and dried sewage sludge(DSS).The properties and mechanism of RM in the preparation of ULS-RMC were discussed.The chemical compon...New ultra-lightweight sludge-red mud ceramics(ULS-RMC) were prepared by red mud(RM),clay and dried sewage sludge(DSS).The properties and mechanism of RM in the preparation of ULS-RMC were discussed.The chemical components,thermal properties and mineral phases of RM were determined by energy dispersive X-ray(EDX),differential scanning calorimetry/thermal gravimetric analysis(DSC/TGA) and X-ray diffraction(XRD),respectively.Constant dosage of DSS to clay and different amounts of RM were utilized in the preparation of ULS-RMC.Physical properties test(bulk density,grain density,water absorption and expansion ratio),XRD and scanning electron microscopy(SEM) were employed to characterize the ULS-RMC.The results show that RM exhibits high hydroscopic property and good water-retention property,and bloating property and fluxing property of RM are caused by abound of gaseous components and flux,respectively.The two chemical properties are utilized to discuss the mineral phases and microstructures differences between ULSC and ULS-RMC.展开更多
Hydroxamated polyacrylamide（HPAM） was synthesized from polyacrylamide（PAM） with high relative molecular mass under the optimum reaction conditions（p H 12 and a molar ratio of hydroxylamine to amide groups of 1.5 ...Hydroxamated polyacrylamide（HPAM） was synthesized from polyacrylamide（PAM） with high relative molecular mass under the optimum reaction conditions（p H 12 and a molar ratio of hydroxylamine to amide groups of 1.5 at 50 ℃for 12 h）. The hydroxamate groups of HPAM were verified by Fourier transform infrared spectrum（FT-IR）. 46%（molar fration） hydroxamate groups and 23%（molar fraction） carbonyl groups on HPAM were determined by conductometric titration combined with Kjeldahl＇s microanalysis method. The settling performance achieved at different flocculant dosages was investigated with high goethite-containing red mud slurry of simulated Bayer process synthesized in laboratory. It turns out that the settling performance of high goethite-containing red mud was better with HPAM. The average settling rate of red mud in the first 5 min and the turbidity of supernatant after settling for 30 min are 2.36 m/h and 507 NTU, respectively, at a flocculant dosage of 120 g/t, which is similar to that achieved with Hx-600.展开更多
A feasible approach to selectively recover iron and rare earth elements(REEs)from red mud through acid leaching-coordination-solvent extraction was proposed.The leaching efficiencies of Fe,Al,Ti,Sc,La,Ce,Nd and Y can ...A feasible approach to selectively recover iron and rare earth elements(REEs)from red mud through acid leaching-coordination-solvent extraction was proposed.The leaching efficiencies of Fe,Al,Ti,Sc,La,Ce,Nd and Y can reach up to 95.9%,82.1%,68.3%,93.3%,82.3%,96.9%,98.3%and 95.6%,respectively,under the optimal condition in the leaching process.Aliquat 336 showed excellent extraction performance of iron in chloride-rich solution,and the maximum extraction efficiency can reach over 96%in one time extraction while the loss of other metals was less than 10%,under the condition of Aliquat 336 concentration(v/v)of 30%,aqueous-organic ratio of 1.0 and extraction time of 20 min.Furthermore,P204 can effectively extract the scandium while Al and most other REEs remain in the aqueous phase.This approach may provide a new insight for the recovery of valuable resources from red mud.展开更多
The absorbent composing of Bayer red mud and water was prepared and applied to removing SO2 from flue gas.Effects of the ratio of liquid to solid(L/S),the absorption temperature,the inlet SO2 concentration,the O2 conc...The absorbent composing of Bayer red mud and water was prepared and applied to removing SO2 from flue gas.Effects of the ratio of liquid to solid(L/S),the absorption temperature,the inlet SO2 concentration,the O2 concentration,SO4^2-and other different components of Bayer red mud on desulfurization were conducted.The mechanism of flue gas desulfurization was also established.The results indicated that L/S was the prominent factor,followed by the inlet SO2 concentration and the temperature was the least among them.The optimum condition was as follows:L/S,the temperature and the SO2 concentration were 20:1,25℃and 1000 mg/m^3,respectively,under the gas flow of 1.5 L/min.The desulfurization efficiency was not significantly influenced when O2 concentration was above 7%.The accumulation of SO4^2-inhibited the desulfurization efficiency.The alkali absorption and metal ions liquid catalytic oxidation were involved in the process,which accounted for 98.61%.展开更多
In order to provide references for selecting highly efficient red mud flocculants, the behaviour of polyacrylamidomethyltrimethyl ammonium chloride （PATAC） in red mud separation process was investigated. PATAC was e...In order to provide references for selecting highly efficient red mud flocculants, the behaviour of polyacrylamidomethyltrimethyl ammonium chloride （PATAC） in red mud separation process was investigated. PATAC was employed as a flocculant for red mud separation from the caustic aluminate liquor at 95 ℃. The used red mud was generated from Chinese diaspore bauxite in Bayer process of alumina production. And the changes of PATAC before or after being treated in caustic solution at 95 ℃ were studied by thermogravimetry （TG） and Fourier transform infrared （FTIR） spectral analysis. The results show that PATAC fails in effectively focculating red mud and PATAC is readily converted to a quaternary ammonium hydroxide （PATAH） in caustic solution. PATAH can be decomposed to a new polymer （HPATAH） even at 95 ℃. Furthermore, there is an intramolecular hydrogen bond formed in the HPATAH polymer chain with two functional groups of--CH2--OH and --CONH2. Therefore, the poor flocculation property of PATAC for red mud separation can be attributed to the thermal decomposition of PATAC in the caustic red mud slurry at 95 ℃ and the formation of intramolecular hydrogen bond in the polymer chain of HPATAH during the thermal decomposition, which causes the absorbable functional groups of PATAC to decrease greatly.展开更多
Red mud is a solid waste discharged in the process of alumina production,and how to realize the efficient recovery of its iron is an urgent problem to be solved.In this study,the iron extraction test and mechanism stu...Red mud is a solid waste discharged in the process of alumina production,and how to realize the efficient recovery of its iron is an urgent problem to be solved.In this study,the iron extraction test and mechanism study of high iron red mud were carried out under the coupling conditions of multiple physical field(microwave field,gas-solid flow field and temperature field)with biomass as the reducing agent.The test results showed that under the optimal conditions,an iron concentrate with a yield of 78.4%,an iron grade of 59.23%,and a recovery rate of 86.65%was obtained.The analyses of XRD,XPS,TEM,and SEM-EDS showed that during the roasting process,the hematite in the high-iron red mud was completely converted to magnetite,and the biomass produced the reductant that provided the magnetization reaction;A large number of cracks and pores appeared in the surface of the hematite reduction product particles,which helped to induce iron minerals to undergo effective mineral phase transformation.The above study provides ideas for the phase transformation and efficient recovery of iron minerals in red mud.展开更多
基金supported by the National Natural Science Foundation of China(22278066,21776039)the National Key R&D Program of China(2023YFB4103001)The Fundamental Research Funds for the Central Universities(DUT2021TB03).
文摘Mercury removal from coal combustion flue gas remains a significant challenge for environmental protection due to the lack of cost-effective sorbents.In this study,a series of red mud(RM)-based sorbents impregnated with sodium halides(NaBr and NaI)are presented to capture elemental mercury(Hg^(0))from flue gas.The modified RM underwent comprehensive characterization,including analysis of its textural qualities,crystal structure,chemical composition,and thermal properties.The results indicate that the halide impregnation substantially impacts the surface area and pore size of the RM.Hg^(0) removal performance was evaluated on a fixed-bed reactor in simulated flue gas(consisting of N_(2),O_(2),CO_(2),NO and SO_(2),etc.)on a modified RM.At an optimal adsorption temperature of 160℃,NaI-modified sorbent(RMI5)offers a removal efficiency of 98%in a mixture of gas,including O_(2),NO and HCl.Furthermore,pseudo-second-order model fitting results demonstrate the chemisorption mechanism for the adsorption of Hg^(0) in kinetic investigations.
基金Projects(51904097,51804103)supported by the National Natural Science Foundation of ChinaProject(2019GGJS056)supported by the Training Program for Young Backbone Teachers in Colleges and Universities of Henan Province,China+2 种基金Project(HB201905)supported by Open Foundation of State Environmental Protection Key Laboratory of Mineral Metallurgical Resources Utilization and Pollution Control,ChinaProject(202102310548)supported by Scientific and Technological Project of Henan Province,ChinaProject(21IRTSTHN006)supported by Program for Innovative Research Team in the University of Henan Province,China。
文摘D2EHPA(P204),tri-butyl-phosphate(TBP)and sodium chloride(NaCl)were attractive for selective extraction of scandium from acid leaching solution of red mud.The extraction parameters of P204 concentration(X_(P204)),NaCl concentration(C_(NaCl)),pH value,reaction time,stirring speed and O/A were investigated to extract scandium and separate iron from the acid leaching solution.The extraction mechanism was analyzed by Fourier transform infrared spectroscopy(FT-IR)and thermodynamic theory.The single-stage extraction efficiency of scandium,iron andβ(Sc/Fe)were 99.1%,9.4%and 1061.2,respectively,with C_(NaCl) of 75 g/L and XP204 of 0.75 at solution pH value of 1.2 and stirring speed of 200 r/min for 6 min,in which a good separation effect of scandium and iron was obtained.The vibration absorption peak Sc─O was contributed to the extraction of scandium with P204.The complex[FeCln]^(3−n) existed in the solution with adding NaCl into the acid leaching solution.The value of n was higher and the valence state of the complex[FeCln]^(3−n) was lower with an increase of chloride concentration,which restricts the extraction efficiency of iron with P204.The extraction of three stages in the counter-current simulation experiments was carried out according to the McCabe-Thiele diagram.Gibbs free energy change(ΔG)of−5.93 kJ/mol,enthalpy change(ΔH)of 23.45 kJ/mol and entropy change(ΔH)of 98.54 J/(mol·K)were obtained in the solvent extraction proces,which indicate that the extraction reaction is easily spontaneous and endothermic and a proper increase of temperature is conducive to the extraction of scandium.
基金Project(2010013111005) supported by the Ph.D Programs Foundation of Ministry of Education of China
文摘New ultra-lightweight sludge-red mud ceramics(ULS-RMC) were prepared by red mud(RM),clay and dried sewage sludge(DSS).The properties and mechanism of RM in the preparation of ULS-RMC were discussed.The chemical components,thermal properties and mineral phases of RM were determined by energy dispersive X-ray(EDX),differential scanning calorimetry/thermal gravimetric analysis(DSC/TGA) and X-ray diffraction(XRD),respectively.Constant dosage of DSS to clay and different amounts of RM were utilized in the preparation of ULS-RMC.Physical properties test(bulk density,grain density,water absorption and expansion ratio),XRD and scanning electron microscopy(SEM) were employed to characterize the ULS-RMC.The results show that RM exhibits high hydroscopic property and good water-retention property,and bloating property and fluxing property of RM are caused by abound of gaseous components and flux,respectively.The two chemical properties are utilized to discuss the mineral phases and microstructures differences between ULSC and ULS-RMC.
基金Project(51174231)supported by the National Natural Science Foundation of China
文摘Hydroxamated polyacrylamide（HPAM） was synthesized from polyacrylamide（PAM） with high relative molecular mass under the optimum reaction conditions（p H 12 and a molar ratio of hydroxylamine to amide groups of 1.5 at 50 ℃for 12 h）. The hydroxamate groups of HPAM were verified by Fourier transform infrared spectrum（FT-IR）. 46%（molar fration） hydroxamate groups and 23%（molar fraction） carbonyl groups on HPAM were determined by conductometric titration combined with Kjeldahl＇s microanalysis method. The settling performance achieved at different flocculant dosages was investigated with high goethite-containing red mud slurry of simulated Bayer process synthesized in laboratory. It turns out that the settling performance of high goethite-containing red mud was better with HPAM. The average settling rate of red mud in the first 5 min and the turbidity of supernatant after settling for 30 min are 2.36 m/h and 507 NTU, respectively, at a flocculant dosage of 120 g/t, which is similar to that achieved with Hx-600.
基金Project(21707167)supported by the Natural Science Foundation of China
文摘A feasible approach to selectively recover iron and rare earth elements(REEs)from red mud through acid leaching-coordination-solvent extraction was proposed.The leaching efficiencies of Fe,Al,Ti,Sc,La,Ce,Nd and Y can reach up to 95.9%,82.1%,68.3%,93.3%,82.3%,96.9%,98.3%and 95.6%,respectively,under the optimal condition in the leaching process.Aliquat 336 showed excellent extraction performance of iron in chloride-rich solution,and the maximum extraction efficiency can reach over 96%in one time extraction while the loss of other metals was less than 10%,under the condition of Aliquat 336 concentration(v/v)of 30%,aqueous-organic ratio of 1.0 and extraction time of 20 min.Furthermore,P204 can effectively extract the scandium while Al and most other REEs remain in the aqueous phase.This approach may provide a new insight for the recovery of valuable resources from red mud.
基金Project(2017YFC0210500)supported by the National Key Technology R&D Program of ChinaProject(2017ACA092)supported by the Major Projects of Technical Innovation in Hubei Province,China
文摘The absorbent composing of Bayer red mud and water was prepared and applied to removing SO2 from flue gas.Effects of the ratio of liquid to solid(L/S),the absorption temperature,the inlet SO2 concentration,the O2 concentration,SO4^2-and other different components of Bayer red mud on desulfurization were conducted.The mechanism of flue gas desulfurization was also established.The results indicated that L/S was the prominent factor,followed by the inlet SO2 concentration and the temperature was the least among them.The optimum condition was as follows:L/S,the temperature and the SO2 concentration were 20:1,25℃and 1000 mg/m^3,respectively,under the gas flow of 1.5 L/min.The desulfurization efficiency was not significantly influenced when O2 concentration was above 7%.The accumulation of SO4^2-inhibited the desulfurization efficiency.The alkali absorption and metal ions liquid catalytic oxidation were involved in the process,which accounted for 98.61%.
基金Project(2005CB623702) supported by the Major State Basic Research and Development Program of China
文摘In order to provide references for selecting highly efficient red mud flocculants, the behaviour of polyacrylamidomethyltrimethyl ammonium chloride （PATAC） in red mud separation process was investigated. PATAC was employed as a flocculant for red mud separation from the caustic aluminate liquor at 95 ℃. The used red mud was generated from Chinese diaspore bauxite in Bayer process of alumina production. And the changes of PATAC before or after being treated in caustic solution at 95 ℃ were studied by thermogravimetry （TG） and Fourier transform infrared （FTIR） spectral analysis. The results show that PATAC fails in effectively focculating red mud and PATAC is readily converted to a quaternary ammonium hydroxide （PATAH） in caustic solution. PATAH can be decomposed to a new polymer （HPATAH） even at 95 ℃. Furthermore, there is an intramolecular hydrogen bond formed in the HPATAH polymer chain with two functional groups of--CH2--OH and --CONH2. Therefore, the poor flocculation property of PATAC for red mud separation can be attributed to the thermal decomposition of PATAC in the caustic red mud slurry at 95 ℃ and the formation of intramolecular hydrogen bond in the polymer chain of HPATAH during the thermal decomposition, which causes the absorbable functional groups of PATAC to decrease greatly.
基金Project(MMCS2023OF02)supported by the Open Foundation of State Key Laboratory of Featured Metal Materials and Life-cycle Safety for Composite Structures,ChinaProject(AA23073018)supported by the Guangxi Science and Technology,ChinaProject(2024M751861)supported by the China Postdoctoral Science Foundation。
文摘Red mud is a solid waste discharged in the process of alumina production,and how to realize the efficient recovery of its iron is an urgent problem to be solved.In this study,the iron extraction test and mechanism study of high iron red mud were carried out under the coupling conditions of multiple physical field(microwave field,gas-solid flow field and temperature field)with biomass as the reducing agent.The test results showed that under the optimal conditions,an iron concentrate with a yield of 78.4%,an iron grade of 59.23%,and a recovery rate of 86.65%was obtained.The analyses of XRD,XPS,TEM,and SEM-EDS showed that during the roasting process,the hematite in the high-iron red mud was completely converted to magnetite,and the biomass produced the reductant that provided the magnetization reaction;A large number of cracks and pores appeared in the surface of the hematite reduction product particles,which helped to induce iron minerals to undergo effective mineral phase transformation.The above study provides ideas for the phase transformation and efficient recovery of iron minerals in red mud.
