Based on inspection data,the authors analyze and summarize the main types and distribution characteristics of tunnel structural defects.These defects are classified into three types:surface defects,internal defects,an...Based on inspection data,the authors analyze and summarize the main types and distribution characteristics of tunnel structural defects.These defects are classified into three types:surface defects,internal defects,and defects behind the structure.To address the need for rapid detection of different defect types,the current state of rapid detection technologies and equipment,both domestically and internationally,is systematically reviewed.The research reveals that surface defect detection technologies and equipment have developed rapidly in recent years.Notably,the integration of machine vision and laser scanning technologies have significantly improved detection efficiency and accuracy,achieving crack detection precision of up to 0.1 mm.However,the non-contact rapid detection of internal and behind-the-structure defects remains constrained by hardware limitations,with traditional detection remaining dominant.Nevertheless,phased array radar,ultrasonic,and acoustic vibration detection technologies have become research hotspots in recent years,offering promising directions for detecting these challenging defect types.Additionally,the application of multisensor fusion technology in rapid detection equipment has further enhanced detection capabilities.Devices such as cameras,3D laser scanners,infrared thermal imagers,and radar demonstrate significant advantages in rapid detection.Future research in tunnel inspection should prioritize breakthroughs in rapid detection technologies for internal and behind-the-structure defects.Efforts should also focus on developing multifunctional integrated detection vehicles that can simultaneously inspect both surface and internal structures.Furthermore,progress in fully automated,intelligent systems with precise defect identification and real-time reporting will be essential to significantly improve the efficiency and accuracy of tunnel inspection.展开更多
Objective:To evaluate the predictive value of the neutrophil⁃to⁃lymphocyte ratio(NLR)and the systemic immune⁃inflammation index(SII)in predicting patients with anti⁃melanoma differentiation⁃associated gene 5⁃positive(...Objective:To evaluate the predictive value of the neutrophil⁃to⁃lymphocyte ratio(NLR)and the systemic immune⁃inflammation index(SII)in predicting patients with anti⁃melanoma differentiation⁃associated gene 5⁃positive(anti⁃MDA5+)dermatomyositis(DM)develop into the rapidly progressive interstitial lung disease(RPILD).Methods:We retrospectively analyzed the clinical and laboratory data of 124 anti⁃MDA5+DM patients from the First Affiliated Hospital of Nanjing Medical University between March 2019 and September 2023.We identified independent risk factors associated with the development and mortality of RPILD with the Cox regression analysis,and determined the optimal cut⁃off values for predicting adverse outcomes with the receiver operating characteristic(ROC)curve analysis.Results:Among the 124 patients,36 patients(29.03%)developed RPILD,and 39 patients(31.45%)died during the follow⁃up period.The results of multivariate Cox regression analysis showed that the elevated NLR was an independent risk factor for RPILD development,while the elevated SII expression was independently associated with the increased mortality of RPILD.Based on the ROC curve analysis,NLR>6.12 was a predictor for RPILD,and SII>875.79 was associated with increased mortality risk of RPILD.Conclusion:Both NLR and SII are accessible,cost⁃effective,and reliable prognostic indicators for the prognosis of patients with anti⁃MDA5^(+)DM,providing a valuable guidance for clinical management and risk stratification of the disease.展开更多
The rapidly solidified powder of AlFeCrZrVSi aluminum alloy was prepared using multistage atomization and consolidated by hotextrusion, the evolution of microstructure of the extruded materials during thermal exposure...The rapidly solidified powder of AlFeCrZrVSi aluminum alloy was prepared using multistage atomization and consolidated by hotextrusion, the evolution of microstructure of the extruded materials during thermal exposure was studied with optical microscope, Xray diffraction and transmission electron microscope(TEM). The results show that the majority of dispersions present in the asextruded alloy are metastable Al12(Fe, Cr, V)3Si, which has excellent thermaldynamical stability and coarsening resistance; the coarsening ratecontrolling process of the Al12(Fe, Cr, V)3Si phase is considered to be diffusion of Fe atom along grain boundaries instead of bulk diffusion of Fe atom.展开更多
To relieve the increasing traffic load, many early built highways need to be widened or reconstructed. The rapid performance detection to existing subgrades is important to their reasonable evaluation and maximized ut...To relieve the increasing traffic load, many early built highways need to be widened or reconstructed. The rapid performance detection to existing subgrades is important to their reasonable evaluation and maximized utilization. Based on five kinds of soils taken from an existing highway in southern China, three commonly detecting methods were used to determine their moisture contents, compaction degrees and resilient moduli. The results showed that the measured moisture contents were greater than the design value, and the compaction degrees decreased sharply compared to the original ones. The moisture and heat exchange produced a decrease in the resilient modulus of plate loading test(PLT) from the standard 60 MPa down to 40 MPa. Afterwards, the portable falling weight deflectometer(PFWD) and dynamic cone penetrometer(DCP) were used to evaluate the subgrade performances. The measured PFWD moduli and the DCP penetration rates were correlated with the resilient moduli of PLT, deflections of the Beckman beam test, compaction degrees and moisture contents. The correlation analysis indicates that both of two methods are suitable in rapid detecting subgrade performances, but PFWD method is more recommended for it has higher accuracy and efficiency.展开更多
Ground improvement has been used on many construction sites to densify granular materials, in other word, to improve soil properties and reduce potential settlement. This work presents a case study of ground improveme...Ground improvement has been used on many construction sites to densify granular materials, in other word, to improve soil properties and reduce potential settlement. This work presents a case study of ground improvement using rapid impact compaction （RIC）. The research site comprises the construction of workshop and depots as part of railway development project at Batu Gajah-Ipoh, Malaysia. In-situ testing results show that the subsurface soil comprises mainly of sand and silty sand through the investigated depth extended to 10 m. Groundwater is approximately 0.5 m below the ground surface. Evaluation of improvement was based on the results of pre- and post-improvement cone penetration test （CPT）. Interpretation software has been used to infer soil properties. Load test was conducted to estimate soil settlement. It is found that the technique succeeds in improving soil properties namely the relative density increases from 45% to 70%, the friction angle of soil is increased by an average of 3°, and the soil settlement is reduced by 50%： The technique succeeds in improving soil properties to approximately 5.0 m in depth depending on soil uniformity with depth.展开更多
The effects of process parameters in rapid heat cycle moulding （RHCM） on parts warpage were investigated. A vehicle-used blue-tooth front shell （consisting of ABS material） was considered as a part example manufac...The effects of process parameters in rapid heat cycle moulding （RHCM） on parts warpage were investigated. A vehicle-used blue-tooth front shell （consisting of ABS material） was considered as a part example manufactured by RHCM method. The corresponding rapid heat response mould with an innovational conformal heating/cooling channel system and a dynamic mould temperature control system based on the Jll-W-160 type precise temperature controller was proposed. During heating/cooling process, the mould was able to be heated from room temperature to 160 ~C in 6 s and then cooled to 80 ~C in 22 s. The effects of processing conditions in RHCM on part warpage were investigated based on the single factor experimental method and Taguchi theory. Results reveal that the elevated mould temperature reduces unwanted freezing during the injection stage, thus improving mouldability and enhancing part quality, whereas the overheated of mould temperature will lead to defective product. The feasible mould temperature scope in RHCM should be no higher than 140 ~C, and the efficient mould temperature scope should be around the polymer heat distortion temperature. Melt temperature as well as injection pressure effects on warpage can be divided into two stages The lower stage gives a no explicit effect on warpage whereas the higher stage leads to a quasi-linear downtrend. But others affect the warpage as a V-type fluctuation, reaching to the minimum around the heat distortion temperature. Under the same mould temperature condition, the effects of process parameters on warpage decrease according to the following order, packing time, packing pressure, melt temperature, injection pressure and cooling time, respectively.展开更多
Rapidly solidified Sn-9Zn-0.1Pr(/Nd) alloy foils were prepared by melt-spinning method. Through comparison, the effects of rapid solidification process and 0.1%Pr/Nd(mass fraction) addition on the microstructure, ther...Rapidly solidified Sn-9Zn-0.1Pr(/Nd) alloy foils were prepared by melt-spinning method. Through comparison, the effects of rapid solidification process and 0.1%Pr/Nd(mass fraction) addition on the microstructure, thermodynamic characteristic of Sn-9Zn solder alloy were analyzed. The tensile-shear tests were used to evaluate the mechanical properties of solder/Cu joints. The results show that the rapid solidification process can greatly refine the microstructure of Sn-9Zn-0.1Pr(/Nd) alloys. After rapid solidification, the effects of Pr/Nd addition on microstructure are depressed. The pasty range of the rapidly solidified Sn-Zn-RE solders is also reduced significantly. The mechanical properties of solder/Cu joints are obviously improved using the rapidly solidified Sn-9Zn-0.1Pr(/Nd) solder alloy, which results in the formation of uniform interface. The promotion effect of Nd addition in Sn-9Zn alloy on the interfacial reaction of solder/Cu joint is more remarkable than that of Pr.展开更多
Rapidly solidified Al87Ni7Cu3Nd3 amorphous alloy was prepared by using melt spinning. Its calorimetric behavior was characterized by using differential scanning calorimeter in a continuous or isothermal heating mode. ...Rapidly solidified Al87Ni7Cu3Nd3 amorphous alloy was prepared by using melt spinning. Its calorimetric behavior was characterized by using differential scanning calorimeter in a continuous or isothermal heating mode. phase transformation was investigated, with a special interest in primary crystallization, by using an in-situ examination of X-ray diffractometry （XRD） and high resolution transmission electron microscopy （HRTEM）. The results show that, the whole devitrification of rapidly solidified Al87NiyCu3Nd3 amorphous alloy involves two main processes of primary crystallization and secondary crystallization that consist mainly of two reactions. For primary crystallization, the apparent activation energies, EIso and EKis and growth activation energies Eg are about 153, 166 and 288 kJ/mol, respectively. The interdiffusion of Al atoms is a rate-controlled step of formation of the a（Al） particles, but slow diffusion of Ni and Nd atoms plays a significant role in retarding growth of the α （Al） particles. For secondary crystallization, EIso, EKis and Eg of the first reaction are about 291,208 and 290 kJ/mol, and those of the second reaction are about 367, 269 and 372 kJ/mol. The two reactions of secondary crystallization are controlled mainly in an interface-controlled three-dimensional mode, depending mainly on slow diffusion of Ni and Nd atoms.展开更多
The 2D sandwich model serves as a potent tool in exploring the influence of surface geometry on the combustion attributes of Ammonium perchlorate/Hydroxyl-terminated polybutadiene(AP/HTPB)propellant under rapid pressu...The 2D sandwich model serves as a potent tool in exploring the influence of surface geometry on the combustion attributes of Ammonium perchlorate/Hydroxyl-terminated polybutadiene(AP/HTPB)propellant under rapid pressure decay.The thickness of the sandwich propellant is derived from slicing the 3D random particle packing,an approach that enables a more effective examination of the micro-flame structure.Comparative analysis of the predicted burning characteristics has been performed with experimental studies.The findings demonstrate a reasonable agreement,thereby validating the precision and soundness of the model.Based on the typical rapid depressurization environment of solid rocket motor(initial combustion pressure is 3 MPa and the maximum depressurization rate is 1000 MPa/s).A-type(a flatter surface),B-type(AP recesses from the combustion surface),and C-type(AP protrudes from the combustion surface)propellant combustion processes are numerically simulated.Upon comparison of the evolution of gas-phase flame between 0.1 and 1 ms,it is discerned that the flame strength and form created by the three sandwich models differ significantly at the beginning stage of depressurization,with the flame structures gradually becoming harmonized over time.Conclusions are drawn by comparison extinction times:the surface geometry plays a pivotal role in the combustion process,with AP protrusion favoring combustion the most.展开更多
The Al-Ni-Y alloy powder was prepared by rapid solidification technology of inert gas atomization. The diameter of amorphous powder is less than 12 μm. The effects of atomization gas on cooling velocity, morphology,...The Al-Ni-Y alloy powder was prepared by rapid solidification technology of inert gas atomization. The diameter of amorphous powder is less than 12 μm. The effects of atomization gas on cooling velocity, morphology, microstructure and microhardness of powder and fine powder ratio were investigated.The results show that the morphology, microstructure and microhardness of powder and fine powder ratio are affected by cooling velocity changed through atomization gas. The cooling velocity of inert gas atomization is more than 1×10~4 K/s. The larger the cooling velocity, the finer the powder, and the smoother the surface of powder; the smaller the diameter of powder, the larger the microhardness of powder.展开更多
Timing of uplift of the Tibetan Plateau is a fundamental work to understand global climatic change and mountain\|building mechanism. Because most of the evidence comes from the Himalaya\|South Tibet, the northern marg...Timing of uplift of the Tibetan Plateau is a fundamental work to understand global climatic change and mountain\|building mechanism. Because most of the evidence comes from the Himalaya\|South Tibet, the northern margin of the Plateau may hold the key to unravel a whole view of the Plateau uplift history, in which basin sediments are the most important part because they have continuously recorded the history of pure surface uplift in related mountains. In the whole foredeep bordered by the North Marginal Thrust (Kunlun—Altun—Qilian—Longmen Trusts) along the northern and eastern Tibetan Plateau, thick Cenozoic stratigraphy is widely distributed and records the whole history of the Plateau uplift process. It can be lithologically divided in three large units from top to bottom: light colored sediments, boulder conglomerate and red bed. The red bed is mostly fine sediments of lacustrine and/or fluviolacustrine origins and the boulder conglomerate has been long thought as evidence of rapid uplift of the Tibetan Plateau. The light colored sediments are mostly eolian and/or fluviolacustrine deposits or desert\|gobi sediments. Thus, to date the boulder conglomerate holds the key to unravel the Plateau uplift. We chose the Linxia Basin in the northeastern Tibetan Plateau and Jiuquan Basin in the northern Qilian Mountains as two pilot controlling sites to reconstruct the history of uplift process of the Tibetan Plate au and its accompanied climatic change and to see if a coupling process would ex ist between the uplift of the Plateau and Asian monsoon system.展开更多
文摘Based on inspection data,the authors analyze and summarize the main types and distribution characteristics of tunnel structural defects.These defects are classified into three types:surface defects,internal defects,and defects behind the structure.To address the need for rapid detection of different defect types,the current state of rapid detection technologies and equipment,both domestically and internationally,is systematically reviewed.The research reveals that surface defect detection technologies and equipment have developed rapidly in recent years.Notably,the integration of machine vision and laser scanning technologies have significantly improved detection efficiency and accuracy,achieving crack detection precision of up to 0.1 mm.However,the non-contact rapid detection of internal and behind-the-structure defects remains constrained by hardware limitations,with traditional detection remaining dominant.Nevertheless,phased array radar,ultrasonic,and acoustic vibration detection technologies have become research hotspots in recent years,offering promising directions for detecting these challenging defect types.Additionally,the application of multisensor fusion technology in rapid detection equipment has further enhanced detection capabilities.Devices such as cameras,3D laser scanners,infrared thermal imagers,and radar demonstrate significant advantages in rapid detection.Future research in tunnel inspection should prioritize breakthroughs in rapid detection technologies for internal and behind-the-structure defects.Efforts should also focus on developing multifunctional integrated detection vehicles that can simultaneously inspect both surface and internal structures.Furthermore,progress in fully automated,intelligent systems with precise defect identification and real-time reporting will be essential to significantly improve the efficiency and accuracy of tunnel inspection.
文摘Objective:To evaluate the predictive value of the neutrophil⁃to⁃lymphocyte ratio(NLR)and the systemic immune⁃inflammation index(SII)in predicting patients with anti⁃melanoma differentiation⁃associated gene 5⁃positive(anti⁃MDA5+)dermatomyositis(DM)develop into the rapidly progressive interstitial lung disease(RPILD).Methods:We retrospectively analyzed the clinical and laboratory data of 124 anti⁃MDA5+DM patients from the First Affiliated Hospital of Nanjing Medical University between March 2019 and September 2023.We identified independent risk factors associated with the development and mortality of RPILD with the Cox regression analysis,and determined the optimal cut⁃off values for predicting adverse outcomes with the receiver operating characteristic(ROC)curve analysis.Results:Among the 124 patients,36 patients(29.03%)developed RPILD,and 39 patients(31.45%)died during the follow⁃up period.The results of multivariate Cox regression analysis showed that the elevated NLR was an independent risk factor for RPILD development,while the elevated SII expression was independently associated with the increased mortality of RPILD.Based on the ROC curve analysis,NLR>6.12 was a predictor for RPILD,and SII>875.79 was associated with increased mortality risk of RPILD.Conclusion:Both NLR and SII are accessible,cost⁃effective,and reliable prognostic indicators for the prognosis of patients with anti⁃MDA5^(+)DM,providing a valuable guidance for clinical management and risk stratification of the disease.
文摘The rapidly solidified powder of AlFeCrZrVSi aluminum alloy was prepared using multistage atomization and consolidated by hotextrusion, the evolution of microstructure of the extruded materials during thermal exposure was studied with optical microscope, Xray diffraction and transmission electron microscope(TEM). The results show that the majority of dispersions present in the asextruded alloy are metastable Al12(Fe, Cr, V)3Si, which has excellent thermaldynamical stability and coarsening resistance; the coarsening ratecontrolling process of the Al12(Fe, Cr, V)3Si phase is considered to be diffusion of Fe atom along grain boundaries instead of bulk diffusion of Fe atom.
基金Project(2017YFC0805307) supported by the National Key Research and Development Program of ChinaProjects(51878078, 51927814, 51911530215) supported by the National Natural Science Foundation of China+4 种基金Project(2018-025) supported by the Training Program for High-level Technical Personnel in Transportation Industry, ChinaProject (2018JJ1026) supported by the Excellent Youth Foundation of Natural Science Foundation of Hunan Province, ChinaProject(17A008) supported by the Key Project of Education Department of Hunan Province, ChinaProjects(kfj150103, kfj170104) supported by the Open Research Fund of State Engineering Laboratory of Highway Maintenance Technology, Changsha University of Science & Technology, ChinaProject(CX20190644) supported by the Postgraduate Scientific Research Innovation Project of Hunan Province, China。
文摘To relieve the increasing traffic load, many early built highways need to be widened or reconstructed. The rapid performance detection to existing subgrades is important to their reasonable evaluation and maximized utilization. Based on five kinds of soils taken from an existing highway in southern China, three commonly detecting methods were used to determine their moisture contents, compaction degrees and resilient moduli. The results showed that the measured moisture contents were greater than the design value, and the compaction degrees decreased sharply compared to the original ones. The moisture and heat exchange produced a decrease in the resilient modulus of plate loading test(PLT) from the standard 60 MPa down to 40 MPa. Afterwards, the portable falling weight deflectometer(PFWD) and dynamic cone penetrometer(DCP) were used to evaluate the subgrade performances. The measured PFWD moduli and the DCP penetration rates were correlated with the resilient moduli of PLT, deflections of the Beckman beam test, compaction degrees and moisture contents. The correlation analysis indicates that both of two methods are suitable in rapid detecting subgrade performances, but PFWD method is more recommended for it has higher accuracy and efficiency.
基金Projects(RG148/12AET,RG086/10AET) supported by the UMRG,MalaysiaProject(PS05812010B) supported by the Post Graduate Research Fund,Malaysia
文摘Ground improvement has been used on many construction sites to densify granular materials, in other word, to improve soil properties and reduce potential settlement. This work presents a case study of ground improvement using rapid impact compaction （RIC）. The research site comprises the construction of workshop and depots as part of railway development project at Batu Gajah-Ipoh, Malaysia. In-situ testing results show that the subsurface soil comprises mainly of sand and silty sand through the investigated depth extended to 10 m. Groundwater is approximately 0.5 m below the ground surface. Evaluation of improvement was based on the results of pre- and post-improvement cone penetration test （CPT）. Interpretation software has been used to infer soil properties. Load test was conducted to estimate soil settlement. It is found that the technique succeeds in improving soil properties namely the relative density increases from 45% to 70%, the friction angle of soil is increased by an average of 3°, and the soil settlement is reduced by 50%： The technique succeeds in improving soil properties to approximately 5.0 m in depth depending on soil uniformity with depth.
基金Project(20122BAB206014)supported by National Natural Science Foundation of ChinaProject(51365038)supported by the Natural Science Foundation of Jiangxi Province,ChinaProject(GJJ13068)supported by the Science and Technology Program of Educational Committee of Jiangxi Province,China
文摘The effects of process parameters in rapid heat cycle moulding （RHCM） on parts warpage were investigated. A vehicle-used blue-tooth front shell （consisting of ABS material） was considered as a part example manufactured by RHCM method. The corresponding rapid heat response mould with an innovational conformal heating/cooling channel system and a dynamic mould temperature control system based on the Jll-W-160 type precise temperature controller was proposed. During heating/cooling process, the mould was able to be heated from room temperature to 160 ~C in 6 s and then cooled to 80 ~C in 22 s. The effects of processing conditions in RHCM on part warpage were investigated based on the single factor experimental method and Taguchi theory. Results reveal that the elevated mould temperature reduces unwanted freezing during the injection stage, thus improving mouldability and enhancing part quality, whereas the overheated of mould temperature will lead to defective product. The feasible mould temperature scope in RHCM should be no higher than 140 ~C, and the efficient mould temperature scope should be around the polymer heat distortion temperature. Melt temperature as well as injection pressure effects on warpage can be divided into two stages The lower stage gives a no explicit effect on warpage whereas the higher stage leads to a quasi-linear downtrend. But others affect the warpage as a V-type fluctuation, reaching to the minimum around the heat distortion temperature. Under the same mould temperature condition, the effects of process parameters on warpage decrease according to the following order, packing time, packing pressure, melt temperature, injection pressure and cooling time, respectively.
基金Project(50675234)supported by the National Natural Science Foundation of China
文摘Rapidly solidified Sn-9Zn-0.1Pr(/Nd) alloy foils were prepared by melt-spinning method. Through comparison, the effects of rapid solidification process and 0.1%Pr/Nd(mass fraction) addition on the microstructure, thermodynamic characteristic of Sn-9Zn solder alloy were analyzed. The tensile-shear tests were used to evaluate the mechanical properties of solder/Cu joints. The results show that the rapid solidification process can greatly refine the microstructure of Sn-9Zn-0.1Pr(/Nd) alloys. After rapid solidification, the effects of Pr/Nd addition on microstructure are depressed. The pasty range of the rapidly solidified Sn-Zn-RE solders is also reduced significantly. The mechanical properties of solder/Cu joints are obviously improved using the rapidly solidified Sn-9Zn-0.1Pr(/Nd) solder alloy, which results in the formation of uniform interface. The promotion effect of Nd addition in Sn-9Zn alloy on the interfacial reaction of solder/Cu joint is more remarkable than that of Pr.
基金Project(2005-5) supported by the Postdoctoral Foundation of Central South University, ChinaProject(2005038560) supported by the Postdoctoral Science Foundation of China
文摘Rapidly solidified Al87Ni7Cu3Nd3 amorphous alloy was prepared by using melt spinning. Its calorimetric behavior was characterized by using differential scanning calorimeter in a continuous or isothermal heating mode. phase transformation was investigated, with a special interest in primary crystallization, by using an in-situ examination of X-ray diffractometry （XRD） and high resolution transmission electron microscopy （HRTEM）. The results show that, the whole devitrification of rapidly solidified Al87NiyCu3Nd3 amorphous alloy involves two main processes of primary crystallization and secondary crystallization that consist mainly of two reactions. For primary crystallization, the apparent activation energies, EIso and EKis and growth activation energies Eg are about 153, 166 and 288 kJ/mol, respectively. The interdiffusion of Al atoms is a rate-controlled step of formation of the a（Al） particles, but slow diffusion of Ni and Nd atoms plays a significant role in retarding growth of the α （Al） particles. For secondary crystallization, EIso, EKis and Eg of the first reaction are about 291,208 and 290 kJ/mol, and those of the second reaction are about 367, 269 and 372 kJ/mol. The two reactions of secondary crystallization are controlled mainly in an interface-controlled three-dimensional mode, depending mainly on slow diffusion of Ni and Nd atoms.
基金supported by the National Natural Science Foundation of China(Grant No.51176076)。
文摘The 2D sandwich model serves as a potent tool in exploring the influence of surface geometry on the combustion attributes of Ammonium perchlorate/Hydroxyl-terminated polybutadiene(AP/HTPB)propellant under rapid pressure decay.The thickness of the sandwich propellant is derived from slicing the 3D random particle packing,an approach that enables a more effective examination of the micro-flame structure.Comparative analysis of the predicted burning characteristics has been performed with experimental studies.The findings demonstrate a reasonable agreement,thereby validating the precision and soundness of the model.Based on the typical rapid depressurization environment of solid rocket motor(initial combustion pressure is 3 MPa and the maximum depressurization rate is 1000 MPa/s).A-type(a flatter surface),B-type(AP recesses from the combustion surface),and C-type(AP protrudes from the combustion surface)propellant combustion processes are numerically simulated.Upon comparison of the evolution of gas-phase flame between 0.1 and 1 ms,it is discerned that the flame strength and form created by the three sandwich models differ significantly at the beginning stage of depressurization,with the flame structures gradually becoming harmonized over time.Conclusions are drawn by comparison extinction times:the surface geometry plays a pivotal role in the combustion process,with AP protrusion favoring combustion the most.
文摘The Al-Ni-Y alloy powder was prepared by rapid solidification technology of inert gas atomization. The diameter of amorphous powder is less than 12 μm. The effects of atomization gas on cooling velocity, morphology, microstructure and microhardness of powder and fine powder ratio were investigated.The results show that the morphology, microstructure and microhardness of powder and fine powder ratio are affected by cooling velocity changed through atomization gas. The cooling velocity of inert gas atomization is more than 1×10~4 K/s. The larger the cooling velocity, the finer the powder, and the smoother the surface of powder; the smaller the diameter of powder, the larger the microhardness of powder.
文摘Timing of uplift of the Tibetan Plateau is a fundamental work to understand global climatic change and mountain\|building mechanism. Because most of the evidence comes from the Himalaya\|South Tibet, the northern margin of the Plateau may hold the key to unravel a whole view of the Plateau uplift history, in which basin sediments are the most important part because they have continuously recorded the history of pure surface uplift in related mountains. In the whole foredeep bordered by the North Marginal Thrust (Kunlun—Altun—Qilian—Longmen Trusts) along the northern and eastern Tibetan Plateau, thick Cenozoic stratigraphy is widely distributed and records the whole history of the Plateau uplift process. It can be lithologically divided in three large units from top to bottom: light colored sediments, boulder conglomerate and red bed. The red bed is mostly fine sediments of lacustrine and/or fluviolacustrine origins and the boulder conglomerate has been long thought as evidence of rapid uplift of the Tibetan Plateau. The light colored sediments are mostly eolian and/or fluviolacustrine deposits or desert\|gobi sediments. Thus, to date the boulder conglomerate holds the key to unravel the Plateau uplift. We chose the Linxia Basin in the northeastern Tibetan Plateau and Jiuquan Basin in the northern Qilian Mountains as two pilot controlling sites to reconstruct the history of uplift process of the Tibetan Plate au and its accompanied climatic change and to see if a coupling process would ex ist between the uplift of the Plateau and Asian monsoon system.
