This study investigated the physicochemical properties,enzyme activities,volatile flavor components,microbial communities,and sensory evaluation of high-temperature Daqu(HTD)during the maturation process,and a standar...This study investigated the physicochemical properties,enzyme activities,volatile flavor components,microbial communities,and sensory evaluation of high-temperature Daqu(HTD)during the maturation process,and a standard system was established for comprehensive quality evaluation of HTD.There were obvious changes in the physicochemical properties,enzyme activities,and volatile flavor components at different storage periods,which affected the sensory evaluation of HTD to a certain extent.The results of high-throughput sequencing revealed significant microbial diversity,and showed that the bacterial community changed significantly more than did the fungal community.During the storage process,the dominant bacterial genera were Kroppenstedtia and Thermoascus.The correlation between dominant microorganisms and quality indicators highlighted their role in HTD quality.Lactococcus,Candida,Pichia,Paecilomyces,and protease activity played a crucial role in the formation of isovaleraldehyde.Acidic protease activity had the greatest impact on the microbial community.Moisture promoted isobutyric acid generation.Furthermore,the comprehensive quality evaluation standard system was established by the entropy weight method combined with multi-factor fuzzy mathematics.Consequently,this study provides innovative insights for comprehensive quality evaluation of HTD during storage and establishes a groundwork for scientific and rational storage of HTD and quality control of sauce-flavor Baijiu.展开更多
The effect of coix seed flour(0%–25%)on the rheological and structural properties of wheat dough and noodle quality was investigated.The addition of coix seed flour was found to enhance the elasticity of dough,which ...The effect of coix seed flour(0%–25%)on the rheological and structural properties of wheat dough and noodle quality was investigated.The addition of coix seed flour was found to enhance the elasticity of dough,which may be attributed to the fact that small starch particles increase the filling capacity within the dough matrix.This increase subsequently resulted in more complete and uniform structure of dough.Moreover,setback viscosity rose to 1095 cP.The rapid water absorption of coix seed starch led to changes in the secondary structure of proteins in dough.The proportion ofβ-sheet markedly increased,whereas the proportion ofα-helix decreased with increasing level of coix seed flour substitution.Meanwhile,coix seed flour substitution significantly reduced the estimated glycemic index of noodles.Correlation analysis revealed that pasting parameters had significant effects on the evaluation of noodle quality.This study provides a foundation for researchers to substitute wheat flour with coix seed flour.展开更多
Background GOSSYM is a mechanistic,process-based cotton model that can simulate cotton crop growth and development,yield,and fiber quality.Its fiber quality module was developed based on controlled experiments explici...Background GOSSYM is a mechanistic,process-based cotton model that can simulate cotton crop growth and development,yield,and fiber quality.Its fiber quality module was developed based on controlled experiments explicitly conducted on the Texas Marker^(-1)(TM1)variety,potentially making its functional equations more aligned with this cultivar.To assess the model’s broader applicability,this study analyzed fiber quality data from 40 upland cotton cultivars,including TM1.The measured fiber quality from all cultivars was then compared with the modelsimulated fiber quality.Results Among the 40 upland cultivars,fiber strength varied from 28.4 cN·tex^(-1) to 34.6 cN·tex^(-1),fiber length ranged from 27.1 mm to 33.3 mm,micronaire value ranged from 2.7 to 4.6,and length uniformity index varied from 82.3%to 85.5%.The model simulated fiber quality closely matched the measured values for TM1,with the absolute percentage error(APE)being less than 0.92%for fiber strength,fiber length,and length uniformity index and 4.7%for micronaire.However,significant differences were observed for the other cultivars.The Pearson correlation coefficient(r)between the measured and simulated values was negative for all fiber quality traits,and Wilmotts’s index of agreement(WIA)was below 0.45,indicating a strong model bias toward TM1 without incorporating cultivar-specific parameters.After incorporating cultivar-specific parameters,the model’s performance improved significantly,with an average r-value of 0.84 and WIA of 0.88.Conclusions The adopted methodology and estimated cultivar-specific parameters improved the model’s simulation accuracy.This approach can be applied to newer cotton cultivars,enhancing the GOSSYM model’s utility and its applicability for agricultural management and policy decisions.展开更多
Additive Manufacturing(AM)can provide customized parts that conventional techniques fail to deliver.One important parameter in AM is the quality of the parts,as a result of the material extrusion 3D printing(3D-P)proc...Additive Manufacturing(AM)can provide customized parts that conventional techniques fail to deliver.One important parameter in AM is the quality of the parts,as a result of the material extrusion 3D printing(3D-P)procedure.This can be very important in defense-related applications,where optimum performance needs to be guaranteed.The quality of the Polyetherimide 3D-P specimens was examined by considering six control parameters,namely,infill percentage,layer height,deposition angle,travel speed,nozzle,and bed temperature.The quality indicators were the root mean square(Rq)and average(Ra)roughness,porosity,and the actual to nominal dimensional deviation.The examination was performed with optical profilometry,optical microscopy,and micro-computed tomography scanning.The Taguchi design of experiments was applied,with twenty-five runs,five levels for each control parameter,on five replicas.Two additional confirmation runs were conducted,to ensure reliability.Prediction equations were constructed to express the quality indicators in terms of the control parameters.Three modeling approaches were applied to the experimental data,to compare their efficiency,i.e.,Linear Regression Model(LRM),Reduced Quadratic Regression Model,and Quadratic Regression Model(QRM).QRM was the most accurate one,still the differences were not high even considering the simpler LRM model.展开更多
Real-time ultrasound has been, and will continue to be, one of the most important tools in enhancing genetic improvement in the U.S. Recent advancements in the technology have allowed ultrasound to be used in evaluati...Real-time ultrasound has been, and will continue to be, one of the most important tools in enhancing genetic improvement in the U.S. Recent advancements in the technology have allowed ultrasound to be used in evaluating intramuscular fat in live animals. Together with other genetic improvement tools, ultrasound technology will offer seedstock producers the opportunity to select for improved IMF in potential breeding stock replacements and hence speed genetic progress for the improvement of this trait. After three generations of selection for IMF using real-time ultrasound in an Iowa State University study, the average EBV for select line pigs is 0.83% greater than for control line pigs. Selection for IMF has, however, resulted in slightly more backfat and less loin muscle area, and a trend toward more days to 114 kg in the select line compared to the control line. Carcass evaluation of a sample of pigs from each litter indicated a similar increase in IMF, increase in backfat, and reduction in loin muscle area for select line pigs. No differences were found for Hunter L* color, Minolta reflectance, and ultimate pH.展开更多
A total of 72 growing-finishing pigs（56 days old） were used to investigate the effects of dietary probiotics on growing performance, pork quality and serum metabolites. Using single factorial experiment design, pigs...A total of 72 growing-finishing pigs（56 days old） were used to investigate the effects of dietary probiotics on growing performance, pork quality and serum metabolites. Using single factorial experiment design, pigs were allotted to three groups（four pens/group and six pigs/pen）. Diet treatments were a corn-soybean meal（control group） and a corn-soybean meal with 1% probiotics（probiotics group） or 80 mg kg-1colistin sulfate（antibiotics group）. Pigs were slaughtered when pigs of the lightest averaged 90 kg（157 days of age）. There was no difference（p＆gt;0.05） in average daily gain or feed/gain, and the average daily feed intake of the antibiotics group was higher than that of the probiotics and the control groups（p＆lt;0.05）. Diet supplemented with probiotics reduced the drip loss and cooking loss of pork（p＆lt;0.05）. Dietary supplementation with probiotics significantly decreased the content of triglycerides, lowdensity lipoprotein and urea nitrogen in serum（p＆lt;0.05）, and increased the content of high-density lipoprotein in serum（p＆lt;0.05）. These results suggested improving effects of dietary probiotics on pork quality and serum metabolism in growing-finishing pigs.展开更多
In order to understand how chitosan affects disease resistance and quality of navel orange fruit(Citrussinensis L.osbeck)cv.Newhall after harvest,navel orange fruits were treated with 2 g chitosan/100 g solution for 1...In order to understand how chitosan affects disease resistance and quality of navel orange fruit(Citrussinensis L.osbeck)cv.Newhall after harvest,navel orange fruits were treated with 2 g chitosan/100 g solution for 1 min,and some fruits were taken out,dried naturally and inoculated with Penicillium italicum.Then,the fruits were stored at 20℃and 85%to 95%RH.Results indicated that the disease incidence and the lesion diameter in the chitosan-treated fruit are 72.72%and 90.19%,lower than those in control fruit on the 18^th day of incubation.The chitosan treatment maintains the soluble protein content,total phenolic and flavonoid level of navel orange fruit,which maybe involve in the maintenance of disease resistance of navel orange fruit.Treating navel orange fruit with 2 g chitosan/100 g solution effectively reduces the decrease in the content ofascorbic acid(AsA),water,titratable acidity(TA)and total soluble solids(TSS).These results suggested that the treatment with chitosan coating enhances the disease resistance and exhibits a potential for storage life extension of the navel orange fruit stored at ambient temperature.展开更多
In the implementation of quality function deployment （QFD）, the determination of the target values of engineering characteristics is a complex decision process with multiple variables and multiple objectives that sh...In the implementation of quality function deployment （QFD）, the determination of the target values of engineering characteristics is a complex decision process with multiple variables and multiple objectives that should trade off, and optimize all kinds of conflicts and constraints. A fuzzy linear programming model （FLP） is proposed. On the basis of the inherent fuzziness of QFD system, triangular fuzzy numbers are used to represent all the relationships and correlations, and then, the functional relationships between the customer needs and engineering characteristics and the functional correlations among the engineering characteristics are determined with the information in the house of quality （HoQ） fully used. The fuzzy linear programming （FLP） model aims to find the optimal target values of the engineering characteristics to maximize the customer satisfaction. Finally, the proposed method is illustrated by a numerical example.展开更多
The study was conducted to demonstrate the effects of dietary protein and water temperature on growth and flesh quality of Songpu mirror carp （Cyprinus carpio） at an initial weight （165.24±5.08） g. Practical ...The study was conducted to demonstrate the effects of dietary protein and water temperature on growth and flesh quality of Songpu mirror carp （Cyprinus carpio） at an initial weight （165.24±5.08） g. Practical diets were formulated to contain five protein levels （29.12%, 31.46%, 34.49%, 38.17%, and 40.13%）, and each diet was randomly assigned triplicate groups of 15 fishes at three temperatures （18℃, 22℃, and 26℃） in the recirculation system. Fishes were fed twice daily to apparent satiation for 56 days. Results indicated that fishes had higher weight gain rate at 22℃ and 26℃ than that at 18℃ （P〈0.05）, but there were no significant differences between 22℃ and 26℃ （P〉0.05）. Based on the weight gain rate, dietary protein level 29.12% could meet the requirement of the body at 18℃, 22℃, or 26℃. Crude protein, crude lipid, moisture and ash of muscle had no significant differences among those treatments （P〉0.05）. pH （after 24 h） of muscle was the highest at 18℃ and the lowest at 22℃ （P〈0.05）, but no differences were observed among different protein level groups at each temperature （P〉0.05）. No significant differences on shear force, water holding capacity, collagen, glycogen and lactate among all the treatments were found （P〉0.05）. It was concluded that when C. carpio fed to apparent satiation, the growth mainly depended upon temperature. Dietary protein could not significantly affect flesh quality, but temperature significantly affected pH of muscles. A dietary protein level 29.12% could meet the requirement of the body at 18℃, 22℃, or 26℃.展开更多
Petrographic analysis combined with various techniques, such as scanning electron microscopy and X-ray diffraction, was used to assess the timing of growth and original mineral cements, the controls on reservoir and r...Petrographic analysis combined with various techniques, such as scanning electron microscopy and X-ray diffraction, was used to assess the timing of growth and original mineral cements, the controls on reservoir and reservoir quality of the fourth member sandstones of Shahejie formation (Es4). The Es4 sandstones are mostly arkose and lithic arkose, rarely feldspathic litharenite, with an average mass fraction of quartz 51.6%, feldspar 33.8% and rock fragments 14.6% (Q51.6F33.8R14.6). They have an average framework composition (mass fraction) of quartz 57.10%, K-feldspar 5.76%, sodium-calcium feldspar 13.00%, calcite 5.77%, dolomite 5.63%, siderite 0.95%, pyrite 0.30%, anhydrite 0.04%, and clay mineral 11.46%. The diagenentic minerals typically include kaolinite, illite-smectite (I/S), illite, chlorite, authigenetic quartz and feldspar, and carbonate and pyrite. Es4 sandstone has undergone stages A and B of eodiagenesis, and now, it is experiencing stage A of mesodiagenesis. Reservoir quality is predominantly controlled by the mechanical compaction, for example, 45.65% of the original porosity loss is related to compaction. The original porosity loss related with cementation is only 26.00%. The reservoir quality is improved as a result of dissolution of feldspar, rock fragment and so forth. The porosity evolved from dissolution varies from 3% to 4%.展开更多
Stability condition and quality evaluation formula of layerlike backfilling roof,Q≥C,where Q denotes is quality index depending on allowable compressive or tensile strength and integrity of backfilling,and C is the t...Stability condition and quality evaluation formula of layerlike backfilling roof,Q≥C,where Q denotes is quality index depending on allowable compressive or tensile strength and integrity of backfilling,and C is the technical index depending on mining method and backfilling technology,were inferred according to simply supported beam theorem.Technical treatment measures for instable backfilling roof,including optimum of appropriate filling materials and dosage for excellent flow property and reduction of backfill cost.It is proved that slope equation of backfill slurry in a stope to be filled is y=hexp[x2/(2σ)2)],where h is height of cone and σ2 is mean square,and that optimum drainage point of backfill slurry can be determined by the equation and sizes of stope.Case study indicates that the results can give a theoretical support for quality evaluation and control of layerlike backfilling.展开更多
To analyze the thermal comfort and indoor air quality (IAQ) in a medium-sized mechanically ventilated gymnasium in Beijing,a field study was carried out. PHOENICS,one of the CFD software,was chosen to simulate the dis...To analyze the thermal comfort and indoor air quality (IAQ) in a medium-sized mechanically ventilated gymnasium in Beijing,a field study was carried out. PHOENICS,one of the CFD software,was chosen to simulate the distribution of the indicators of indoor air in the gymnasium to check the air-conditioning parameters reasonable or not. And there was a questionnaire for audiences and staff about the acceptance and satisfaction of the thermal comfort,simultaneously,some environmental parameters were monitored. Then an experiment was carried out in gymnasium with the plate sedimentation to the biological aerosol in the air. Finally,the thermal comfort and IAQ in the gymnasium were assessed based on the results of above questionnaire survey and measurements. The results show that most parameters of the environmental are within the standard limits of thermal comfort and IAQ in the monitored period,and the biological contaminants initially come from human beings. The main species in the gymnasium are streptobacillus,coccus,cladosporium,penicillium and neurospora.展开更多
文摘This study investigated the physicochemical properties,enzyme activities,volatile flavor components,microbial communities,and sensory evaluation of high-temperature Daqu(HTD)during the maturation process,and a standard system was established for comprehensive quality evaluation of HTD.There were obvious changes in the physicochemical properties,enzyme activities,and volatile flavor components at different storage periods,which affected the sensory evaluation of HTD to a certain extent.The results of high-throughput sequencing revealed significant microbial diversity,and showed that the bacterial community changed significantly more than did the fungal community.During the storage process,the dominant bacterial genera were Kroppenstedtia and Thermoascus.The correlation between dominant microorganisms and quality indicators highlighted their role in HTD quality.Lactococcus,Candida,Pichia,Paecilomyces,and protease activity played a crucial role in the formation of isovaleraldehyde.Acidic protease activity had the greatest impact on the microbial community.Moisture promoted isobutyric acid generation.Furthermore,the comprehensive quality evaluation standard system was established by the entropy weight method combined with multi-factor fuzzy mathematics.Consequently,this study provides innovative insights for comprehensive quality evaluation of HTD during storage and establishes a groundwork for scientific and rational storage of HTD and quality control of sauce-flavor Baijiu.
文摘The effect of coix seed flour(0%–25%)on the rheological and structural properties of wheat dough and noodle quality was investigated.The addition of coix seed flour was found to enhance the elasticity of dough,which may be attributed to the fact that small starch particles increase the filling capacity within the dough matrix.This increase subsequently resulted in more complete and uniform structure of dough.Moreover,setback viscosity rose to 1095 cP.The rapid water absorption of coix seed starch led to changes in the secondary structure of proteins in dough.The proportion ofβ-sheet markedly increased,whereas the proportion ofα-helix decreased with increasing level of coix seed flour substitution.Meanwhile,coix seed flour substitution significantly reduced the estimated glycemic index of noodles.Correlation analysis revealed that pasting parameters had significant effects on the evaluation of noodle quality.This study provides a foundation for researchers to substitute wheat flour with coix seed flour.
基金supported by United States Department of Agriculture,Agricultural Research Service(No.58-8042-9-072)United States Department of Agriculture-National Institute of Food and Agriculture(No.2019-34263-30552)+1 种基金Management Information System(No.043050)United States Department of Agriculture-Agricultural Research Service-Non-Assistance Cooperative Agreement(No.58-6066-2-030).
文摘Background GOSSYM is a mechanistic,process-based cotton model that can simulate cotton crop growth and development,yield,and fiber quality.Its fiber quality module was developed based on controlled experiments explicitly conducted on the Texas Marker^(-1)(TM1)variety,potentially making its functional equations more aligned with this cultivar.To assess the model’s broader applicability,this study analyzed fiber quality data from 40 upland cotton cultivars,including TM1.The measured fiber quality from all cultivars was then compared with the modelsimulated fiber quality.Results Among the 40 upland cultivars,fiber strength varied from 28.4 cN·tex^(-1) to 34.6 cN·tex^(-1),fiber length ranged from 27.1 mm to 33.3 mm,micronaire value ranged from 2.7 to 4.6,and length uniformity index varied from 82.3%to 85.5%.The model simulated fiber quality closely matched the measured values for TM1,with the absolute percentage error(APE)being less than 0.92%for fiber strength,fiber length,and length uniformity index and 4.7%for micronaire.However,significant differences were observed for the other cultivars.The Pearson correlation coefficient(r)between the measured and simulated values was negative for all fiber quality traits,and Wilmotts’s index of agreement(WIA)was below 0.45,indicating a strong model bias toward TM1 without incorporating cultivar-specific parameters.After incorporating cultivar-specific parameters,the model’s performance improved significantly,with an average r-value of 0.84 and WIA of 0.88.Conclusions The adopted methodology and estimated cultivar-specific parameters improved the model’s simulation accuracy.This approach can be applied to newer cotton cultivars,enhancing the GOSSYM model’s utility and its applicability for agricultural management and policy decisions.
文摘Additive Manufacturing(AM)can provide customized parts that conventional techniques fail to deliver.One important parameter in AM is the quality of the parts,as a result of the material extrusion 3D printing(3D-P)procedure.This can be very important in defense-related applications,where optimum performance needs to be guaranteed.The quality of the Polyetherimide 3D-P specimens was examined by considering six control parameters,namely,infill percentage,layer height,deposition angle,travel speed,nozzle,and bed temperature.The quality indicators were the root mean square(Rq)and average(Ra)roughness,porosity,and the actual to nominal dimensional deviation.The examination was performed with optical profilometry,optical microscopy,and micro-computed tomography scanning.The Taguchi design of experiments was applied,with twenty-five runs,five levels for each control parameter,on five replicas.Two additional confirmation runs were conducted,to ensure reliability.Prediction equations were constructed to express the quality indicators in terms of the control parameters.Three modeling approaches were applied to the experimental data,to compare their efficiency,i.e.,Linear Regression Model(LRM),Reduced Quadratic Regression Model,and Quadratic Regression Model(QRM).QRM was the most accurate one,still the differences were not high even considering the simpler LRM model.
文摘Real-time ultrasound has been, and will continue to be, one of the most important tools in enhancing genetic improvement in the U.S. Recent advancements in the technology have allowed ultrasound to be used in evaluating intramuscular fat in live animals. Together with other genetic improvement tools, ultrasound technology will offer seedstock producers the opportunity to select for improved IMF in potential breeding stock replacements and hence speed genetic progress for the improvement of this trait. After three generations of selection for IMF using real-time ultrasound in an Iowa State University study, the average EBV for select line pigs is 0.83% greater than for control line pigs. Selection for IMF has, however, resulted in slightly more backfat and less loin muscle area, and a trend toward more days to 114 kg in the select line compared to the control line. Carcass evaluation of a sample of pigs from each litter indicated a similar increase in IMF, increase in backfat, and reduction in loin muscle area for select line pigs. No differences were found for Hunter L* color, Minolta reflectance, and ultimate pH.
基金Supported by China Agriculture Research System(CARS-36)Program for Innovative Research Team of Universities in Heilongjiang Province
文摘A total of 72 growing-finishing pigs（56 days old） were used to investigate the effects of dietary probiotics on growing performance, pork quality and serum metabolites. Using single factorial experiment design, pigs were allotted to three groups（four pens/group and six pigs/pen）. Diet treatments were a corn-soybean meal（control group） and a corn-soybean meal with 1% probiotics（probiotics group） or 80 mg kg-1colistin sulfate（antibiotics group）. Pigs were slaughtered when pigs of the lightest averaged 90 kg（157 days of age）. There was no difference（p＆gt;0.05） in average daily gain or feed/gain, and the average daily feed intake of the antibiotics group was higher than that of the probiotics and the control groups（p＆lt;0.05）. Diet supplemented with probiotics reduced the drip loss and cooking loss of pork（p＆lt;0.05）. Dietary supplementation with probiotics significantly decreased the content of triglycerides, lowdensity lipoprotein and urea nitrogen in serum（p＆lt;0.05）, and increased the content of high-density lipoprotein in serum（p＆lt;0.05）. These results suggested improving effects of dietary probiotics on pork quality and serum metabolism in growing-finishing pigs.
文摘In order to understand how chitosan affects disease resistance and quality of navel orange fruit(Citrussinensis L.osbeck)cv.Newhall after harvest,navel orange fruits were treated with 2 g chitosan/100 g solution for 1 min,and some fruits were taken out,dried naturally and inoculated with Penicillium italicum.Then,the fruits were stored at 20℃and 85%to 95%RH.Results indicated that the disease incidence and the lesion diameter in the chitosan-treated fruit are 72.72%and 90.19%,lower than those in control fruit on the 18^th day of incubation.The chitosan treatment maintains the soluble protein content,total phenolic and flavonoid level of navel orange fruit,which maybe involve in the maintenance of disease resistance of navel orange fruit.Treating navel orange fruit with 2 g chitosan/100 g solution effectively reduces the decrease in the content ofascorbic acid(AsA),water,titratable acidity(TA)and total soluble solids(TSS).These results suggested that the treatment with chitosan coating enhances the disease resistance and exhibits a potential for storage life extension of the navel orange fruit stored at ambient temperature.
基金supported by the National Natural Science Foundation of China (70571041).
文摘In the implementation of quality function deployment （QFD）, the determination of the target values of engineering characteristics is a complex decision process with multiple variables and multiple objectives that should trade off, and optimize all kinds of conflicts and constraints. A fuzzy linear programming model （FLP） is proposed. On the basis of the inherent fuzziness of QFD system, triangular fuzzy numbers are used to represent all the relationships and correlations, and then, the functional relationships between the customer needs and engineering characteristics and the functional correlations among the engineering characteristics are determined with the information in the house of quality （HoQ） fully used. The fuzzy linear programming （FLP） model aims to find the optimal target values of the engineering characteristics to maximize the customer satisfaction. Finally, the proposed method is illustrated by a numerical example.
基金Supported by the Special Fund for Agro-scientific Research in Public Interest(CARS-46)the National Key Technology Research and Development Program in 12th Five-year Plan of China(2012BAD25B10)
文摘The study was conducted to demonstrate the effects of dietary protein and water temperature on growth and flesh quality of Songpu mirror carp （Cyprinus carpio） at an initial weight （165.24±5.08） g. Practical diets were formulated to contain five protein levels （29.12%, 31.46%, 34.49%, 38.17%, and 40.13%）, and each diet was randomly assigned triplicate groups of 15 fishes at three temperatures （18℃, 22℃, and 26℃） in the recirculation system. Fishes were fed twice daily to apparent satiation for 56 days. Results indicated that fishes had higher weight gain rate at 22℃ and 26℃ than that at 18℃ （P〈0.05）, but there were no significant differences between 22℃ and 26℃ （P〉0.05）. Based on the weight gain rate, dietary protein level 29.12% could meet the requirement of the body at 18℃, 22℃, or 26℃. Crude protein, crude lipid, moisture and ash of muscle had no significant differences among those treatments （P〉0.05）. pH （after 24 h） of muscle was the highest at 18℃ and the lowest at 22℃ （P〈0.05）, but no differences were observed among different protein level groups at each temperature （P〉0.05）. No significant differences on shear force, water holding capacity, collagen, glycogen and lactate among all the treatments were found （P〉0.05）. It was concluded that when C. carpio fed to apparent satiation, the growth mainly depended upon temperature. Dietary protein could not significantly affect flesh quality, but temperature significantly affected pH of muscles. A dietary protein level 29.12% could meet the requirement of the body at 18℃, 22℃, or 26℃.
基金Project(2006AA09Z336) supported by the National High-Tech Research and Development Program of China
文摘Petrographic analysis combined with various techniques, such as scanning electron microscopy and X-ray diffraction, was used to assess the timing of growth and original mineral cements, the controls on reservoir and reservoir quality of the fourth member sandstones of Shahejie formation (Es4). The Es4 sandstones are mostly arkose and lithic arkose, rarely feldspathic litharenite, with an average mass fraction of quartz 51.6%, feldspar 33.8% and rock fragments 14.6% (Q51.6F33.8R14.6). They have an average framework composition (mass fraction) of quartz 57.10%, K-feldspar 5.76%, sodium-calcium feldspar 13.00%, calcite 5.77%, dolomite 5.63%, siderite 0.95%, pyrite 0.30%, anhydrite 0.04%, and clay mineral 11.46%. The diagenentic minerals typically include kaolinite, illite-smectite (I/S), illite, chlorite, authigenetic quartz and feldspar, and carbonate and pyrite. Es4 sandstone has undergone stages A and B of eodiagenesis, and now, it is experiencing stage A of mesodiagenesis. Reservoir quality is predominantly controlled by the mechanical compaction, for example, 45.65% of the original porosity loss is related to compaction. The original porosity loss related with cementation is only 26.00%. The reservoir quality is improved as a result of dissolution of feldspar, rock fragment and so forth. The porosity evolved from dissolution varies from 3% to 4%.
基金Project(50490270) supported by the National Natural Science Foundation of China
文摘Stability condition and quality evaluation formula of layerlike backfilling roof,Q≥C,where Q denotes is quality index depending on allowable compressive or tensile strength and integrity of backfilling,and C is the technical index depending on mining method and backfilling technology,were inferred according to simply supported beam theorem.Technical treatment measures for instable backfilling roof,including optimum of appropriate filling materials and dosage for excellent flow property and reduction of backfill cost.It is proved that slope equation of backfill slurry in a stope to be filled is y=hexp[x2/(2σ)2)],where h is height of cone and σ2 is mean square,and that optimum drainage point of backfill slurry can be determined by the equation and sizes of stope.Case study indicates that the results can give a theoretical support for quality evaluation and control of layerlike backfilling.
基金Project(2006BAJ02A10) supported by the National Key Technologies R & D Program of China
文摘To analyze the thermal comfort and indoor air quality (IAQ) in a medium-sized mechanically ventilated gymnasium in Beijing,a field study was carried out. PHOENICS,one of the CFD software,was chosen to simulate the distribution of the indicators of indoor air in the gymnasium to check the air-conditioning parameters reasonable or not. And there was a questionnaire for audiences and staff about the acceptance and satisfaction of the thermal comfort,simultaneously,some environmental parameters were monitored. Then an experiment was carried out in gymnasium with the plate sedimentation to the biological aerosol in the air. Finally,the thermal comfort and IAQ in the gymnasium were assessed based on the results of above questionnaire survey and measurements. The results show that most parameters of the environmental are within the standard limits of thermal comfort and IAQ in the monitored period,and the biological contaminants initially come from human beings. The main species in the gymnasium are streptobacillus,coccus,cladosporium,penicillium and neurospora.
