An analytical method, using sector field inductively coupled plasma mass spectrometry （SF-ICP-MS） for rapid simultaneous determination of Be, Na, Mg, Si, Ca, Ti, V, Cr, Fe, Co, Ni, Cu, Zn, As, Sn, Sb, Pb and Bi in e...An analytical method, using sector field inductively coupled plasma mass spectrometry （SF-ICP-MS） for rapid simultaneous determination of Be, Na, Mg, Si, Ca, Ti, V, Cr, Fe, Co, Ni, Cu, Zn, As, Sn, Sb, Pb and Bi in electrolytic manganese metal, was described. At the beginning, the samples were decomposed by HNO3 and H2504, and then analyzed by SF-ICP-MS. Most of the spectral interferences could be avoided by measuring in different mass resolution modes. The matrix effects due to the excess of sulfuric acid and Mn were evaluated. Correction of matrix effects was conducted by using the internal standard elements. The optimum condition for the determination was investigated and discussed. The detection limit is in the range of 0.001-0.169 gg/L. The current method is applied to the determination of trace impurities in electrolytic manganese metal. And experiments show that good results can be obtained much faster, more accurately and conveniently by current method.展开更多
Electrolytic manganese residue(EMR), a high volume byproduct resulting from the electrolytic manganese industry, was used as a cheap and abundant chemical source for preparing MnO2 and EMR-made calcium silicate hydrat...Electrolytic manganese residue(EMR), a high volume byproduct resulting from the electrolytic manganese industry, was used as a cheap and abundant chemical source for preparing MnO2 and EMR-made calcium silicate hydrate(EMR-CSH). The MnO2 is successfully synthesized from the metal cations extracted from EMR, which can effectively recycle the manganese in the EMR. By the combination of XRD, SEM and EDX analysis, the as-prepared MnO2 is found to exhibit a single-phase with the purity of 90.3%. Furthermore, EMR-CSH is synthesized from EMR via hydrothermal method. Based on the detailed analyses using XRD, FT-IR, FE-SEM, EDX and BET surface area measurement, the product synthesized under the optimum conditions(p H 12.0 and 100 °C) is identified to be a calcium silicate hydrate with a specific surface area of 205 m2/g incorporating the slag-derived metals(Al and Mg) in its structure. The as-synthesized material shows good adsorption properties for removal of Mn2+ and phosphate ions diluted in water, making it a promising candidate for efficient bulk wastewater treatment. This conversion process, which enables us to fabricate two different kinds of valuable materials from EMR at low cost and through convenient preparation steps, is surely beneficial from the viewpoint of the chemical and economical use of EMR.展开更多
Electrolytic manganese residue leachate(EMRL)contains plenty of Mn^(2+) and NH_(4)^(+)-N,and phosphogypsum leachate(PGL)contains large amounts of PO_(4)^(3-)-P and F^(-).Traditional methods of EMRL and PGL discharge c...Electrolytic manganese residue leachate(EMRL)contains plenty of Mn^(2+) and NH_(4)^(+)-N,and phosphogypsum leachate(PGL)contains large amounts of PO_(4)^(3-)-P and F^(-).Traditional methods of EMRL and PGL discharge could seriously damage the ecological environment.In this study,an innovative method for cooperative removal Mn^(2+),NH_(4)^(+)-N,PO_(4)^(3-)-P,F^(-)from PG and POFT was studied.The result showed that Mn^(2+),PO_(4)^(3-)-P and F^(-)were mainly removed in forms of Mg_(3)Si_(4)O_(10)(OH)_(2),Mn_(3)O_(4),Mn_(3)(PO_(4))_(2),Mg_(3)(PO_(4))_(2),CaSO_(4)·2H_(2)O,MnF_(2),MnOOH and Ca_(2)P_(2)O_(7)·2H_(2)O,when LG-MgO was used to adjust the pH value of the system to 9.5,and the volume ratio of EMRL and PGL was 1:4,as well as reaction for 1 h at 25℃.NH_(4)^(+)-N was mainly removed by struvite precipitate,when the molar ratio of N:Mg:P was 1:3:2.4.The concentrations of Mn^(2+),NH_(4)^(+)-N and F^(-)were lower than the integrated wastewater discharge standard.The concentration of PO_(4)^(3-)-P decreased from 254.20 mg/L to 3.21 mg/L.This study provided a new method for EMRL and PGL cooperative harmless treatment.展开更多
Grainy electrolytic manganese dioxide was prepared by electrodeposition in a 0.9 mol/L MnSO4 and 2.5 mol/LH2SO4 solution. The structure, particle size and appearance of the grainy electrolytic manganese dioxide were d...Grainy electrolytic manganese dioxide was prepared by electrodeposition in a 0.9 mol/L MnSO4 and 2.5 mol/LH2SO4 solution. The structure, particle size and appearance of the grainy electrolytic manganese dioxide were determined by powder X-ray diffraction, laser particle size analysis and scanning electron micrographs measurements. Current density has important effects on cell voltage, anodic current efficiency and particle size of the grainy electrolytic manganese dioxide, and the optimum current density is 30 A/dm2. The grainy electrolytic manganese dioxide electrodeposited under the optimum conditions consists of γ-MnO2 with an orthorhombic lattice structure; the grainy electrolytic manganese dioxide has a spherical or sphere-like appearance and a narrow particle size distribution with an average particle diameter of 7.237 μm.展开更多
基金Project(21075138)supported by the National Natural Science Foundation of ChinaProject(cstc2013jcyjA10088)supported by Chongqing Natural Science Foundation,ChinaProject(KJ121311)supported by Scientific and Technological Research Program of Chongqing Municipal Education Commission,China
文摘An analytical method, using sector field inductively coupled plasma mass spectrometry （SF-ICP-MS） for rapid simultaneous determination of Be, Na, Mg, Si, Ca, Ti, V, Cr, Fe, Co, Ni, Cu, Zn, As, Sn, Sb, Pb and Bi in electrolytic manganese metal, was described. At the beginning, the samples were decomposed by HNO3 and H2504, and then analyzed by SF-ICP-MS. Most of the spectral interferences could be avoided by measuring in different mass resolution modes. The matrix effects due to the excess of sulfuric acid and Mn were evaluated. Correction of matrix effects was conducted by using the internal standard elements. The optimum condition for the determination was investigated and discussed. The detection limit is in the range of 0.001-0.169 gg/L. The current method is applied to the determination of trace impurities in electrolytic manganese metal. And experiments show that good results can be obtained much faster, more accurately and conveniently by current method.
基金Project(21376273)supported by the National Natural Science Foundation of ChinaProject(2010FJ1011)supported by the Research Fund of Science and Technology of Hunan Province,China
文摘Electrolytic manganese residue(EMR), a high volume byproduct resulting from the electrolytic manganese industry, was used as a cheap and abundant chemical source for preparing MnO2 and EMR-made calcium silicate hydrate(EMR-CSH). The MnO2 is successfully synthesized from the metal cations extracted from EMR, which can effectively recycle the manganese in the EMR. By the combination of XRD, SEM and EDX analysis, the as-prepared MnO2 is found to exhibit a single-phase with the purity of 90.3%. Furthermore, EMR-CSH is synthesized from EMR via hydrothermal method. Based on the detailed analyses using XRD, FT-IR, FE-SEM, EDX and BET surface area measurement, the product synthesized under the optimum conditions(p H 12.0 and 100 °C) is identified to be a calcium silicate hydrate with a specific surface area of 205 m2/g incorporating the slag-derived metals(Al and Mg) in its structure. The as-synthesized material shows good adsorption properties for removal of Mn2+ and phosphate ions diluted in water, making it a promising candidate for efficient bulk wastewater treatment. This conversion process, which enables us to fabricate two different kinds of valuable materials from EMR at low cost and through convenient preparation steps, is surely beneficial from the viewpoint of the chemical and economical use of EMR.
基金Project(2018YFC1903500)supported by the National Key Research and Development Program of ChinaProject(52174386)supported by the National Natural Science Foundation of ChinaProject(2021YFH0058)supported by the Science and Technology Plan Project of Sichuan Province,China。
文摘Electrolytic manganese residue leachate(EMRL)contains plenty of Mn^(2+) and NH_(4)^(+)-N,and phosphogypsum leachate(PGL)contains large amounts of PO_(4)^(3-)-P and F^(-).Traditional methods of EMRL and PGL discharge could seriously damage the ecological environment.In this study,an innovative method for cooperative removal Mn^(2+),NH_(4)^(+)-N,PO_(4)^(3-)-P,F^(-)from PG and POFT was studied.The result showed that Mn^(2+),PO_(4)^(3-)-P and F^(-)were mainly removed in forms of Mg_(3)Si_(4)O_(10)(OH)_(2),Mn_(3)O_(4),Mn_(3)(PO_(4))_(2),Mg_(3)(PO_(4))_(2),CaSO_(4)·2H_(2)O,MnF_(2),MnOOH and Ca_(2)P_(2)O_(7)·2H_(2)O,when LG-MgO was used to adjust the pH value of the system to 9.5,and the volume ratio of EMRL and PGL was 1:4,as well as reaction for 1 h at 25℃.NH_(4)^(+)-N was mainly removed by struvite precipitate,when the molar ratio of N:Mg:P was 1:3:2.4.The concentrations of Mn^(2+),NH_(4)^(+)-N and F^(-)were lower than the integrated wastewater discharge standard.The concentration of PO_(4)^(3-)-P decreased from 254.20 mg/L to 3.21 mg/L.This study provided a new method for EMRL and PGL cooperative harmless treatment.
文摘Grainy electrolytic manganese dioxide was prepared by electrodeposition in a 0.9 mol/L MnSO4 and 2.5 mol/LH2SO4 solution. The structure, particle size and appearance of the grainy electrolytic manganese dioxide were determined by powder X-ray diffraction, laser particle size analysis and scanning electron micrographs measurements. Current density has important effects on cell voltage, anodic current efficiency and particle size of the grainy electrolytic manganese dioxide, and the optimum current density is 30 A/dm2. The grainy electrolytic manganese dioxide electrodeposited under the optimum conditions consists of γ-MnO2 with an orthorhombic lattice structure; the grainy electrolytic manganese dioxide has a spherical or sphere-like appearance and a narrow particle size distribution with an average particle diameter of 7.237 μm.
